ASUSTeK Computer HD05UGPZ5 BLUETOOTH MODULE User Manual 3 OF 4

ASUSTeK Computer Inc BLUETOOTH MODULE 3 OF 4

$Introduction 第 154 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30zThis window is an example showing pictures when [Filmstrip] has been selected frthe [View] menu in Explorer. NoteThis section describes how to synchronize information on your PDA (calendars, contacts, inbetc) with your PC using Microsoft ActiveSync.When you connect via Bluetooth instead of with a standard cable, you will always be able tosynchronise your data without the hassle of having to connect the cable. →Connecting using ActiveSync→Establishing a partnership between ActiveSync and a PDA→Finishing an ActiveSync connection→Cancelling a partnershipzPlease use ActiveSync v.3.7 or higher. Also please establish a partnership between the devices using a USB or infrared link before you connect via Bluetooth. zPlease refer to the ActiveSync Help or other manuals for information on how to use theapplication. zMicrosoft Outlook 2002 or another schedule management tool must also be installed onPC. ImportantSynchronising information using ActiveSync [SPP]$

$Introduction 第 155 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30Both the PC and PDA must be set up in order for a connection to be established.■Preparing the PC1. On the PC, click on [Start]→[All Programs]→[Microsoft ActiveSync]The initial ActiveSync set-up window will appear.It is assumed in the explanation below that no ActiveSync connections have beenestablished with other devices.2. Click [File]→[Connection Settings]The [Connection Settings] window will appear.3. Place a check next to [Allow serial cable or infrared connection to this COM porand then select "COM7".Connecting using ActiveSyncProcedure$

$Introduction 第 156 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30 {In the standard set-up, the port is configured to "COM7" (refer to Steps (3)(4) under "Preparing the PDA" below). When using a different port, pleasechange the port number selected in this window. ■Preparing the PDA1. Tap on the Bluetooth icon in the bottom right of the screen {The graphic above shows an example of a PDA operating window.The connection procedure may be different depending on the manufacturermodel of PDA you use. Please refer to the product instruction manuals for further details. The [Bluetooth Settings] window will openNoteProcedureImportant$

$Introduction 第 157 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30The [Bluetooth Settings] window will open.The message "Connection not registered" will appear if no Bluetooth device has registered.Please tap on [OK] to close the message.2. Double click on [Tools]→[Search for peripheral components]The application searches for nearby Bluetooth devices.3. Tap and hold on the destination PC icon, and then select [Update Services]$

$Introduction 第 158 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30A search for services will be carried out, and then a list of service names and theconnection status will appear as list in the lower window.4. Tap and hold on "COM7" from the list of service names, and then select "RegisteActiveSync".5. Tap [OK] in the confirmation message window$

$Introduction 第 159 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30An ActiveSync connection will be initiated.Once a connection has been successfully established with a PDA, the procedure for establishing a partnership with the PDA will be started by the ActiveSync application on PC.Performing this set-up procedure will enable data to be synchronised between your PC aPDA.1. In the [New Partnership (Set Up a Partnership)] window, select "Standard partnership", and then click on the [Next] buttonThe [New Partnership (Specify Data Synchronisation Method)] window will appeEstablishing a partnership between ActiveSync and a PDAProcedure$

$Introduction 第 160 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/302. Select "Synchronise with this PC", and then click on the [Next] buttonThe [New Partnership (Select Synchronisation Settings)] window will appear.3. Select the type of information to be synchronised between your PC and PDA, andclick on the [Next] buttonThe [New Partnership (Completing Setup)] window will appear.4. Click on the [Finish] button$

$Introduction 第 161 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30When you click on the [Finish] button, ActiveSync will begin to synchronise youinformation.[Confirming changes]　　　　　　　　　　↓　　　　　　　　(Synchronisation process)　　　　　　　　　　↓[Synchronisation complete]While the ActiveSync connection is active, synchronisation will be performed$

$Introduction 第 162 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30While the ActiveSync connection is active, synchronisation will be performed whenever information is changed on either the PC or the PDA.Once a partnership has been established, every time you start your PC (and PDAthereafter, a Bluetooth connection will be opened and ActiveSync will synchroniyour information.Follow the procedure below on your PDA if you want to end an ActiveSync connection manually.1. Tap and hold on "COM7" in the Bluetooth Settings window, and select [ActiveSyRelease]Follow the procedure below from the ActiveSync window on the PC if you want to cancpartnership between your PC and PDA.1. Click on [File]→"Delete partnership"Finishing an ActiveSync connectionProcedureCancelling a partnershipProcedure$

$Introduction 第 163 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30Click on the [Yes] button when the confirmation message appears.{If you wish to create another ActiveSync connection, you will have to repeabove procedure to re-establish a partnership. 　 NoteThis section provides a description of how to use a Bluetooth -compatible wireless headset tocommunicate (chat) using Microsoft NetMeeting or other software. →Registering the headset→Making a connection to the headset→Disconnecting from the headset1. Right-click on the Bluetooth icon in the tasktray, then click on [Add New ConneWizard] Registering the headsetProcedureUsing a headset to communicate [HSP]$

$Introduction 第 164 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30{Alternatively, you can click on [Start]>[All Programs]>[Bluetooth]>[BluetoSettings], then click on [New Connection] in the [Bluetooth Settings] screehas opened. The [Add New Connection Wizard (Welcome to the Add New Connection Wizarscreen will appear.2. Turn the headset power onOnce you have turned on the headset, set the mode to enable a Bluetooth connect{The procedure for operating the headset may differ depending on the manufacturer and model.Please consult your user guide for a detailed description of how to operate unit. 3. Confirm that [Express Mode] has been selected, then click on the [Next] buttonThe [Add New Connection Wizard (Searching for Bluetooth Devices)] screen wiappear.NoteImportant$

$Introduction 第 165 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30Once the device search has been completed, the [Add New Connection Wizard (Sa Device)] screen will appear.4. Select the name of the headset device from the list, then click on the [Next] butto5. Answering with the headsetIf the service has been properly detected, a screen will appear indicating that the headset is being called, and a tone will accordingly sound in the headset.Please press the headset switch. {The procedure for operating the headset may differ depending on the manufacturer and model.Please consult your user guide for a detailed description of how to operate unit. The [Add New Connection Wizard (Configuring (Connecting to Voice Circuit))]screen will appear, and device configuration will be performed.Important$

$Introduction 第 166 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30pp , g p{If you are connecting to the headset for the first time, or if another Bluetooaudio device has not yet been registered, the following [Found New HardwWizard] screen will appear, from which you can proceed to install the driveIf another audio device has already been registered (i.e., the driver has beeninstalled), you can proceed to Step 9 without having to install the driver. 6. Click on the [Next] buttonThe [Install Hardware] screen will appear.7. Click on the [Continue Anyway] buttonThe following screen will appear automatically. You may disregard it and click o[Continue Anyway] button.The [Add New Connection Wizard (Completing the Found New Hardware Wizarscreen, which is the final screen of the installation wizard, will appear.8Click on the [Finish] buttonNote$

$Introduction 第 167 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/308.Click on the [Finish] buttonOnce driver installation is complete, the [Add New Connection Wizard (Enter Connection Name)] will appear.9. Confirm the information you have entered, and click on the [Next] buttonThe [Add New Connection Wizard (Completing the Add New Connection Wizarscreen will appear.10. Click on the [Finish] buttonThe configuration information will be registered, and an icon will be displayed in[Bluetooth Settings] screen.$

$Introduction 第 168 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30You can make a connection to the headset from an icon that has been registered in [BlueSettings].zBefore making a connection to the headset, please check that you have turned on thheadset's power, and that it has been enabled for a Bluetooth connection.Please ensure that the following audio -related applications have been closed beforeconnect the headset to your PC. {Windows Media Player, BeatJam, InterVideo WinDVD and other music/audiplayback software {Windows Messenger and other e-conferencing software If you wish to use these applications, please terminate the headset connection beforlaunch them. 1. Right-click on the headset icon, then click on [Connect].2. Answer with the headset A screen will appear indicating that the headset is being called, and a tone will accordingly sound in the headset.Please press the headset switch.Making a connection to the headsetImportantProcedure$

$Introduction 第 169 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30If the connection has been properly established, the icon's appearance will changeindicate a connected state.You may now launch conferencing and voice-recognition software and use the headset.Please follow the steps below to disconnect from the headset.1. Right-click on the headset icon in the [Bluetooth Settings] screen, then click on [Disconnect].A message will appear, requesting confirmation that you wish to disconnect. Clicthe [Yes] button.The icon on the [Bluetooth Settings] screen will appear as shown below, indicatinthat the device has been disconnected.Disconnecting from the headsetProcedureFor security purposes, you may not wish your device to be detected by other Bluetooth usersprocedure for accomplishing this is provided below.Making a device undiscoverable to other users$

$Introduction 第 170 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30ppgp1. Right-click on the Bluetooth icon in the task tray, and click on [Device PropertieSecurity]The [Device Properties] window will appear.2. Select [Non-discoverable mode] in [Discoverability mode] under the [Security] tand then click on the [OK] buttonYour device will now be undetectable by other users, even when they search for devices.zOther devices are still able to establish connections with your device even if you haenabled the Non-discoverable mode.Please enable "Non-connectable mode" if you wish to reject connections from othedevices.Related topic: "Bluetooth Manager"ProcedureNote$

$Introduction 第 171 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30　 Since Bluetooth communication is conducted wirelessly, there is always the possibility that aparty may be able to intercept your transmissions.You can use encryption to render the content indecipherable to anyone who manages to interit.zEncrypting your transmissions will still not guarantee complete security. Accordingly, please be aware that transmitting data is conducted with an element of risk for the user1. Right-click on the Bluetooth icon in the task tray, and click on [Device PropertieSecurity].The [Device Properties] window will appear.2. Select [Link Level Enforced Security] in [Security Mode] under the [Security] taa check next to [Encryption], and then click on the [OK] buttonImportantProcedureEncrypting the content of your transmissions$

$Introduction 第 172 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30zOnce you have configured the security mode, a window will appear when you firsta connection to another device, prompting you to enter a Bluetooth passkey (PIN cPlease click on the [OK] button after you have entered the passkey.zThe window in which you enter the passkey will not appear once you have connectmore than two times to the device.Related topic: "Bluetooth Manager" NoteThe "default connection" refers to the dial -up connection configured for use whenever a connection is made to the Internet.If several connections have been registered, you can change the default connection by followthe procedure below.1. Start Internet Explorer2. Click on [Tools]→[Internet Options...]The [Internet Options] window will appearProcedureChanging the default connection$

$Introduction 第 173 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30The [Internet Options] window will appear.3. Click on the [Connections] tabIn this window, "Direct Connection" is set as the default, and "Never dial a connection" has been selected.Change the settings so that "London A" will always be dialled when you connectthe Internet.4. Select "Always dial my default connection"$

$Introduction 第 174 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/305. Click on "London A", and then click on the [Set Default] button"London A" has been changed to the default connection. zAlternatively, if you wish to connect to the Internet from a LAN in a company or oenvironment where a LAN can be accessed, select "Never dial a connection" if youa dial-up configuration, but do not want dial-up to occur automatically.zWhen connecting to the Internet via a LAN, you must enter the appropriate LAN settings under [LAN Settings...]. Note$

$Introduction 第 175 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30This section describes how to send business card data wirelessly using Microsoft Outlook zThe explanation below relates to an example in which Microsoft Outlook 2002 has beeused to perform the procedure. Subtle differences may arise when using other versions software. You can send business card data directly from the "Contacts" window in Outlook.1. Start Microsoft Outlook, and open the "Contacts" window2. Double-click on the contact whose details you wish to send as a business cardThe details of the contact you selected will appear.NoteSending business card dataProcedureSending business card data from Outlook$

$Introduction 第 176 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/303. Click on the [to Bluetooth] from the toolbar The [Device List] window will appear.{If the [to Bluetooth] button does not appear on the toolbar, please refer to Installing business card-sending functionality in Outlook as an Add -in" beand change the settings accordingly. 4. Select the destination for the business card data, and then click on the [Send] but NoteNote$

$Introduction 第 177 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30{If you cannot find the destination device in the list, please click on the [Searching for devices] button to discover it. The business card will be sent.If the business card has been sent successfully, the message below will appear.{If the transmission was unsuccessful, please attempt to send the data once mafter having confirmed the operating conditions (power status, security settetc) of the destination device. ■Installing business card-sending functionality in Outlook as an Add -inYou can install one of the functions of the Bluetooth Utility in Outlook as an "Add -in", will enable you to send business cards from the Outlook toolbar.1. Click on [Tools]-[Options...] in OutlookNoteNoteProcedure$

$Introduction 第 178 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30The [Options] dialog box will appear.2. Select the [Other] tab, and then click on the [Advanced Options...] button in the "General" fieldThe [Advanced Options] dialog box will appear3. Click on the [COM Add-Ins...] buttonThe [COM Add-Ins] dialog box will appear.4. Click on the [Add...] button$

$Introduction 第 179 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30The [Add Add-In] dialog box will appear.5. Select "TosBTAddin.dll", and then click on the [OK] button{"TosBTAddin.dll" can be found on the hard drive at the address below.C:\Program Files\Toshiba\Bluetooth Toshiba Stack 6. Confirm that "Send to Bluetooth" has been added to the list and that a check appenext to it, and then click on the [OK] button This will complete the Addin processNote$

$Introduction 第 180 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30This will complete the Add-in process.In order for a PC to connect to and communicate with a Bluetooth device, the Bluetooth Utilwill create a gateway for data to be exchanged between the respective devices. This gateway known as a "port" (or "virtual COM port").Since one virtual COM port will be allocated to each device, trouble -free communication wbe possible even if several devices are being used.When you use the Bluetooth Utility, a virtual COM port will be automatically created on sethowever, virtual COM ports can be created manually if so needed. zBluetooth Manager must be active in order for you to be able to use Bluetooth Local CWhen Bluetooth communications are performed, there will always be a "client/server" relationship between the various devices. A "client" is a device that sends certain requestanother device, while a "server" is a device that provides a service on receipt of such reqfrom another device. For example, when a PC issues a print command to a wireless printer, the PC functions aclient, while the printer functions as the server.When a PDA or other device attempts to receive files located on a PC by means of file transfer protocol, the PC functions as the server, while the PDA functions as the client.Virtual Bluetooth COM ports can be created both for clients and servers. zBluetooth virtual COM port for a clientVirtual COM port used when your device is the client, and requests are sent to anodevice.zBluetooth virtual COM port for a serverVirtual COM port used when your device is the server, and requests are received franother device.Bluetooth virtual COM ports are created according to the procedure below.1. Click on the [Printers and Other Hardware] icon in the Control PanelNoteClients and serversCreating a virtual COM portProcedureManually creating a virtual Bluetooth COM port$

$Introduction 第 181 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30The [Printers and Other Hardware] window appears.2. Double-click on the [Bluetooth Local COM] iconThe main Bluetooth Local COM window will appear.{Even when the Control Panel appears in Classic view, please simply click o[Bluetooth Local COM] icon.Note$

$Introduction 第 182 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30{No such distinction between viewing formats exists in Windows 2000.3. Click on the [Add...] buttonThe [Bluetooth Local COM Wizard] window, from where you can create a virtuaCOM port, will appear.Start from this window when creating Bluetooth virtual COM ports for either seror clients.→Creating a Bluetooth virtual COM port for a client→Creating a Bluetooth virtual COM port for a server Please follow the procedure below to delete a virtual COM port when it is no longer needDeleting a virtual COM portNote$

$Introduction 第 183 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30zYou can only delete virtual COM ports created by the Bluetooth Local COM utility1. Select the port you wish to delete from the [Bluetooth Local COM] window, andclick on the [Delete] buttonA message will appear asking you to confirm that you wish to delete the port.2. Click on the [Yes] buttonThe port will be deleted.3. Click on the [OK] buttonNote$

$Introduction 第 184 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30This section provides detailed information on the [Bluetooth Settings] window. ■[Bluetooth] menuMain windowMenuCategory DescriptionAdd New Connection Opens the [Add New Connection Wizard] window, and then searchnew devices.Connect Connects to selected device.Disconnect Disconnects from selected device.Details Displays detailed information about selected device.Bluetooth Settings$

$Introduction 第 185 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30Delete Deletes selected device.Create shortcut on Desktop Creates a shortcut icon for the selected device on the Desktop.Rename Changes the name of the device you have selected.Change Icon Changes the icon of the device you have selected.COM Auto Connect Settings Opens the [COM Auto Connect Settings] window, and allows you tenable/disable Auto Connect.Displays the device connection name and port used. Check the box enable Auto Connect, and remove the check to disable Auto ConnecYou will need to connect manually to use a device in the latter caseAV player selection Opens [Select AV Payer] window, and allows you to select the application to be used when you want to play sound files or CDs.Exit Closes the [Bluetooth Settings] window.$

$Introduction 第 186 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30■[View] menu■[Help] menuDisplays a list of devices that have been registered in [Bluetooth Settings].Category DescriptionLarge icons Changes the way icons are displayed on a device.Small iconsListDetailsCategory DescriptionHelp Opens the Bluetooth Utility User Guide.Version Displays the version information for Bluetooth Settings.Device ListFunction buttonsCategory DescriptionNew Connection Opens [Add New Connection Wizard] window.Details... Shows details of selected device.Delete Deletes selected device.Creating a ShortcutIf you have created a shortcut icon on the Desktop, you can easily establish a connection to adevice that has been registered using Bluetooth Settings without having to open the BluetoothSettings window.ProcedureOne-touch connection to Bluetooth devices$

$Introduction 第 187 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/301. Right-click on Bluetooth icon in task tray and click on [Bluetooth Settings] {Alternatively, you can click [Start] →[All Programs]→[Bluetooth]→[BluetootSettings]. The [Bluetooth Settings] screen will appear, from where you can create a Shortcut en"Bluetooth Mouse." 2. Right-click on the [BT-Mouse-01] icon, and then click on [Create Shortcut on Deskt A shortcut icon entitled "BT-Mouse-01" will appear on the Desktop.　　■Establishing a connection from the Shortcut1. Double-click on the "BT-Mouse-01" icon from the DesktopThe [Bluetooth Settings] window will open. ProcedureNote$

$Introduction 第 188 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/302. Turn on the mouse, set it to Bluetooth-connectable mode, and then click on the [OKbutton in the [Bluetooth Settings] window.The mouse will be connected.After a keyboard or mouse (HID profile), printer (HCRP or SPP profiles), or other device habeen set up for the first time, subsequent connections will be automatically restored wheneveoperate the device, print out a document from the PC, or perform another similar activity. Should the connection not have been properly restored, please establish a manual connectionthe device using the procedure below.1. Right-click on Bluetooth icon in task tray and click on [Bluetooth Settings] {Alternatively, click [Start]→[All Programs]→[Bluetooth]→[Bluetooth SettingThe [Bluetooth Settings] screen will appear, from where you can create a Shortcut en"BT Mouse." 2. Right-click on the [BT-Mouse-01] icon, and then click on the [Connect] buttonProcedureNoteManually connecting to a Bluetooth device$

$Introduction 第 189 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30g[], [ ]The [Bluetooth Settings] window will open. 3. Turn on the mouse, enable Bluetooth-connection mode, and click on the [OK] buttonthe [Bluetooth Settings] window.The mouse will be connected. {If you wish to manually disconnect a device, right -click on its icon and click [Disconnect].Note$

$Introduction 第 190 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30When the following message appears, click on the [Yes] button. You can change a device icon that has been registered on the Bluetooth Settings screen.1. Right-click on the Bluetooth icon in the task tray, and then click on [Bluetooth Settin {Alternatively, click [Start]→[All Programs]→[Bluetooth]→[Bluetooth SettingThe [Bluetooth Settings] window will appear. Now try to change the icon for "My Mobile." 2. Right-click on the "My Mobile" icon, and then click on [Change Icon]ProcedureNoteChanging a connection icon$

$Introduction 第 191 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30A list of available icons will appear.3. Select the icon, and then click on the [OK] buttonThe new icon will appear.$

$Introduction 第 192 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30You can change a the name of a device icon that has been registered on the Bluetooth Settingscreen.1. Right-click on the Bluetooth icon in the task tray, and then click on [Bluetooth Settin {Alternatively, click [Start]→[All Programs]→[Bluetooth]→[Bluetooth SettingThe [Bluetooth Settings] window will appear. Now try to change the connection nam"My Mobile" to "Pocket PC."2. Right-click on "My Mobile", and then click on [Change Name]You will now be able to enter a name.ProcedureNoteChanging a connection icon name$

$Introduction 第 193 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/303. Enter "Pocket PC", and then hit the [Enter] keyThe new name will appear.This section provides detailed information on the settings categories in Bluetooth Manager. Main menuCategory DescriptionBluetooth Settings Opens [Bluetooth Settings] window.Wireless File Transfer Open the [Wireless File Transfer] window.Bluetooth Manager$

$Introduction 第 194 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30Remote Camera Open the [Remote Camera] window.Add New Connection Opens the [Add New Connection Wizard] window.Device Properties&Security Displays Bluetooth device information on your PC.[General] tabAllows you to confirm the name, address and other settings displother devices. z[Device Name] is the only category able to be changed. If ywish to change the name of a device, enter the new name, aclick on the [OK] or [Apply] button.zClick on the [Default] button to restore the initial settings. [Security] tabSecurity-related (user) settings can be configured under this tab.Note$

$Introduction 第 195 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30zClick on the [Default] button to restore the initial settings.1) Selecting Non-connectable mode will cause connection requesrejected from any device, including registered ones. Device detecwill still be possible.2) Selecting Non-pairable mode will make it impossible to bond another device in a new connection relationship. Connection willpossible when a request has been received from a registered deviDevice detection will still be possible.3) Devices to which you have initially connected by entering a Pwill not require you to do so for future connections. Connection wbe possible even if Link Level Security has been selected. NoteCategory DescriptionDiscoverability modeNon-discoverable modeOther devices will not be able to detect yours.Discoverable mode Other devices will be able to detect yours.Connectability modeNon-connectable modeOther devices will not be able to connect to yours.1)Connectable mode Other devices will be able to connect to yours.Pairing modeNon-pairable mode2)You will not receive pairing requests initiated from remote devices.Pairable mode You will receive pairing requests initiated from remote devices.Security modeNon-secure mode No security will be enforced.Link Level Security Enforced3)Requires Bluetooth passkey(PIN code) to be entered onconnection with another device.Encryption Encrypts data to be transmitted.Power off Turns off Bluetooth(Turned off)$

$Introduction 第 196 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30zCommunication using Bluetooth will be impossible once itbeen turned off. When you next wish to use Bluetooth, plearight-click on the Bluetooth icon in the task tray, and then c[Power ON].Important→(Turned on)Service Properties Ensures security against various kinds of access from remote devHere you can enable or disable the following four typical serviceare accessed remotely.zThis function is designed to provide robust security againstfrom remote devices. The "enable/disable" controls only reaccess made from remote devices. You will still be able to remote devices from your local device, regardless of the insettings. zRemove the tick from each button to disable the related (sefunction.NoteCategory DescriptionBluetooth Information Exchange Service Ticking the box enables a (serverfunction that allows files, images,business cards to be transferred frremote device using Bluetooth Information Exchanger.$

$Introduction 第 197 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30　PAN Networking Service Ticking the box enables a (serverfunction that allows networking toperformed from a remote device uPAN Networking Service.Bluetooth COM Port Service Ticking the box enables a (serverfunction that allows COM Serviceperformed from a remote locationthe Serial Port Service.AV Remote Control Service Ticking the box enables a (serverfunction that allows remote controperformed from a remote device uAV Remote Control Service.Help Displays the Bluetooth Utility User Guide.Exit Exits Bluetooth Manager. zWhen you exit Bluetooth Manager, Bluetooth communicatibe disabled. When you next wish to use Bluetooth, please c[Start]→[All Programs]→[Bluetooth]→[Bluetooth SettingWindows 2000, click on [Start]→[Programs]→[Bluetooth][Bluetooth Settings]). ImportantThis section provides detailed information on the settings categories in Bluetooth InformationExchanger.Main windowBluetooth Information Exchanger$

$Introduction 第 198 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30 Three folders are available for data exchange: "Image transfer", "File transfer" and "ObjePush". Bluetooth menuCategory DescriptionDevice Discovery Detects Bluetooth devices.Configuration Allows detailed setting of categories related to Bluetooth InformatiExchanger.-[General] tab-[Mode] tab-[Inbox/Business Card] tab-[Shared folder] tab-[Image box] tab-[Associate] tab-[Transfer mode] tab-[Service security] tab-[Service class] tab-[Information] tab-[Version] tabHelp Displays Bluetooth Utility User Guide.Data exchange folders$

$Introduction 第 199 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30CategoryDescriptionClick on the icon to display a list of devices. "Image box" is a folder ontransferring images.Click on the icon to display a list of devices. "Shared folder" is a sharetransferring files.Click on the icon to display a list of devices. "Inbox" is a folder on youbusiness cards.$

$Introduction 第 200 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30This section provides detailed information on the settings categories in Remote Camera.■[Bluetooth] menuMain windowMenuCategory DescriptionDevice Search Searches for remote cameras.Properties [Filter for Search Devices]Remote Camera$

$Introduction 第 201 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30The program may discover devices other than digital cameras, depeon which profiles are supported by those devices.Adjusting the setting to "Loose filtering" will increase the likelihoodevices other than those intended will be detected.The further you slide the setting towards "Tight filtering", the strictwill be the criteria determining device detection, and the lower the likelihood will be that irrelevant devices will be included.Please adjust the filtration level according to the results of the searc[Multi Shot]Allows you to set the number of consecutive images captured by yodigital camera in the dialog box below (between 2 and 16 inclusive[Pixel Size]Images will be sent to your PC after having been automatically converted to the size specified in the dialog box below, regardless osize of the original image data.$

$Introduction 第 202 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30■[Help] menu 　 A list of cameras that have been registered as remote cameras will be displayed.Clicking on this button will execute a search for remote cameras.Images transferred to the PC from a remote camera will be displayed.Clicking on this button will display the folders on the hard drive where images that havetransferred to the PC have been stored. [Inbox settings]Opens the "Browse folders..." dialog box and allows you to select tfolder where you would like your captured images to be saved.Exit Exits Remote Camera.Category DescriptionImage monitor version informationDisplays version information for the image monitor.List of cameras[Camera Search...] buttonDisplay images[Explorer...] button$

$Introduction 第 203 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30zA folder for saving your images will be created automatically.Images as seen through the lens of your remote camera will be displayed. 　 The size of the operating window display can be adjusted from 100% (1x) to 300% (3x).NoteCamera operation windowCamera imagesDisplay magnificationImportant$

$Introduction 第 204 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30zIncreasing the size of the operating window will impede its ability to display imageand will have an adverse effect on other processes being performed by your PC. Pladjust the magnification as appropriate for your intended use. 　 Clicking on this button will display the folders on the hard drive where images that have transferred to the PC have been stored. Clicking this button will cause the camera to take the number of images specified in [Consecutive image settings] under the [Bluetooth] menu and then send those images to yPC.Clicking this button will cause the camera to take one picture and then send the image toPC. [Explorer...] buttonShutter button (consecutive images)Shutter button (single images)Bluetooth Local COM$

$Introduction 第 205 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30This section provides detailed information on the settings categories in Bluetooth Local COMDisplays a list of configured ports. Displays the function of each port.Ports displayed as "Toshiba BT Port (COMxx)" are TOSHIBA Bluetooth virtual COM pDisplays the application used to create those COM ports.The following information will appear for ports created by Bluetooth Local COM. 　 Main windowPortDescriptionOwnerCOM port for client Local COM - ClientCOM port for server Local COM - Server [(name of service supplied by port)]Function buttonsCategory DescriptionAdd Starts the Add COM Port Wizard.zThere can be up to 64 ports. If COM ports 1 to 64 already exist, you wnot be able to add another port. NoteDelete Deletes selected port.$

$Introduction 第 206 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30zYou can only delete COM ports created by Bluetooth Local COM. NoteOK Click on this button to confirm settings information, and close the BluetoothLocal COM window.This section provides detailed information on the settings categories in Wireless File TransfeDisplays a list of files/folders to be sent.Displays other devices to which you are able to send files. Files will be sent to those devthat have been checked. Name 　Displays name of destination devices.Connection methodMain windowFiles/foldersDevices to which data can be sentWireless File Transfer$

$Introduction 第 207 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30　 Connection method　Displays method used to connect to other devices.zIf a device to which you would like to send data is not listed, you can click on the [Search] button to search for other devices. NoteFunction buttonsCategory DescriptionAdd Displays the window below, from where you can add files and/or folders yowould like to send.Delete By selecting a file from the list and clicking on the "Delete" button, you canremove that file (i.e., the file will not be sent).Search Searches for Bluetooth devices.Cancel Closes the "Wireless File Transfer" window. Send Sends a file.This section describes possible causes and countermeasures to be considered when your Bluedevice cannot be configured properly, functions abnormally or presents other problems relateits operation.The section "What you need to know about using Bluetooth " describes the basic concepbe aware of when using Bluetooth. Should you still encounter problems after having readthrough this information, please refer to the following list, which has been arranged accoto application. Basic understandingTroubleshooting$

$Introduction 第 208 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30to application.zGeneral operation of the Bluetooth UtilityzUsing a wireless modem stationzUsing an access pointzUsing a printerzUsing a Bluetooth headset zUsing a keyboard or mouse zUsing a camera zUsing a PDA zUsing a mobile telephone Troubleshooting by applicationzPlease refer to "What you need to know about using Bluetooth " for an understandithe basic concepts to be aware of when using Bluetooth. zIf the Bluetooth icon does not appear in the task tray, Bluetooth Manager will not bactive, which will prevent you from being able to use any of the functions of the Bluetooth Utility.Start the utilities as instructed below to enable Bluetooth Manager to start automatiand allow all functions to be utilized.Bluetooth Settings(from Windows XP)[Start] > [All Programs] > [Bluetooth] > [Bluetooth Settings](from Windows 2000)[Start] > [Programs] > [Bluetooth] > [Bluetooth Settings]Remote Camera(from Windows XP)[Start] > [All Programs] > [Bluetooth] > [Remote Camera](from Windows 2000)[Start] > [Programs] > [Bluetooth] > [Remote Camera]Wireless File Transfer(from Windows XP)[Start] > [All Programs] > [Bluetooth] > [Wireless File Transfer](from Windows 2000)[Start] > [Programs] > [Bluetooth] > [Wireless File Transfer]ImportantBluetooth ManagerBluetooth icon does not appear in task trayGeneral operation of the Bluetooth Utility$

$Introduction 第 209 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30zThe wireless communication switch is turned off. Please switch it on.zThe other device(s) may have been set to Non -discoverable mode.Please check the mode settings on the device.zThe other device may be using a profile that is not supported by the Bluetooth UtilPlease check the profile being used on the other device.zThe following profiles are compatible with Bluetooth Settings.DUN, FAX, LAP, SPP, HID, HCRP, FTP, OPP, HSP, PAN and BIPDevices running profiles other than those above will not be able to be registered wiBluetooth Settings.zSelect and right-click on a file, and then you can choose either the FTP or OPP prouse when you click on [Send to Bluetooth Device].If neither profile is supported by the destination device, the file will not be able to bsent from the right-click menu.The transmission will also fail if you use FTP to send a file to a device that only supports the OPP profile.Should this occur, please click on [Bluetooth] →[Profiles] under [Bluetooth InformExchanger] to configure the Transfer mode. zThe other device may have a certain security level enforced (Non -connectable moetc). Please confirm the security settings of the other device.Please enter the correct password if you are asked to enter one. zSee "Using a camera"Bluetooth SettingsClicking on the [New Connection] button brings up the message "Unable to prepare Bluetooth."Remote device(s) cannot be detectedServices on a remote device are undiscoverableBluetooth Information ExchangerAn error occurs when you try to send a file using the right -click menu.Cannot open shared folder on remote device using [File Transfer].Remote CameraBluetooth Local COMCannot add port$

$Introduction 第 210 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30zA maximum of 64 virtual COM ports can be added. You will be unable to add anoport if 64 ports have already been configured.zPlease refer to "What you need to know about using Bluetooth " for an understandithe basic concepts to be aware of when using Bluetooth. zIf the modem station is connected to and is being used by another device, the modestation will be undetectable even if you search for it. zIf the modem station is connected to and is being used by another device, no other device will be able to connect to the modem station.zThe Bluetooth passkey (PIN code) comprises a sequence of alphanumeric characterwith the letters able to be rendered in upper and lower case.If [Caps Lock] is on, the Bluetooth passkey may not be able to be entered correctlyzPlease ensure that the telephone cable is connected from the socket to the "LINE" terminal on the modem station. {If the telephone cable has come loose because it has not been fully inserted inthe socket, the resulting poor contact may prevent data from being transmitteaccurately.{Communication will be impossible if the interior of the cable has been brokePlease replace the cable with another one. zPlease ensure that the two slide switches on the underside of the main unit have beto the "NORMAL" and "MODEM" positions respectively. ImportantModem station cannot be detectedCannot connect to modem stationBluetooth passkey entry failedCannot connect to telephone lineNoteChIUsing a wireless modem station$

$Introduction 第 211 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30zThe telephone number of the connection (i.e., the telephone number for the access of your Internet service provider) may not be correct. Please check the telephone number.zThe user ID and/or password for the provider with whom you have signed up may been entered incorrectly. Please check the user ID and password.zThe default connection may have been configured with different settings. Please seconnection configured for mobile telephone use as the default connection.zWhen you place a call using a company switchboard or other exchange, the systemrequire you to enter a "0" before the telephone number itself. Please check the typetelephone line you are using.zOnce you have registered a wireless modem station as your fax server, you will neeenter the fax settings from the [Printer and Faxes] window in the Control Panel.Please refer to "Using a modem station for fax transmissions " for information on tconfiguration procedure.zThe telephone number of the fax destination may have been entered incorrectly. Plcheck the telephone number.zIf the setting under COM Auto Connect Settings has been set to "Off", a connectionot automatically be established with the modem. Please connect to the modem manually.zWhen you place a call using a company switchboard or other exchange, the systemrequire you to enter a "0" before the telephone number itself. Please check the typetelephone line you are using.zThe fax service may not have been enabled for sending (or receiving).Please check the settings by following the procedure below.1. Open [Printers and Faxes] from the Control Panel, right -click on the [Fax]and then click on [Properties]The [Fax properties] window will appear.2. Select the [Device] tab, right-click on the modem you wish to use, and theon [Properties]Cannot connect to the InternetCannot send or receive faxes$

$Introduction 第 212 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/303. Select the [Send] tab, and then confirm that "Enable device to send" has bechecked.4. Select the [Receive] tab, and then confirm that "Enable device to receive" hbeen checked (when you wish to receive faxes)$

$Introduction 第 213 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/305. Click on the [OK] buttonzPlease refer to "What you need to know about using Bluetooth " for an understandithe basic concepts to be aware of when using Bluetooth. zIf the access point is connected to and is being used by another device, the access pwill be undetectable even if you search for it.zIf the access point is connected to and is being used by another device, no other dewill be able to connect to the access point.zThe LAN cable may not be properly connected to the access point. Please check thconnection status.{If the LAN cable has come loose because it has not been fully inserted into thsocket, the resulting poor contact may prevent data from being transmitted accurately.{Communication will be impossible if the interior of the LAN cable has been broken Please replace the cable with another oneImportantAccess point cannot be detectedCannot connect to access pointCannot connect to LANNoteUsing an access point$

$Introduction 第 214 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30broken. Please replace the cable with another one.zThe access point may not have been configured correctly, and may not be able to maintain the connection to the LAN.Please refer to the product instruction manual for information on how to configure access point. zIf you are using a LAN to connect to the Internet, the LAN environment of the comor location where you are trying to establish the connection may require you to convia a proxy server .Please click here for information on configuring a proxy server.Cannot connect to the InternetzPlease refer to "What you need to know about using Bluetooth " for an understandithe basic concepts to be aware of when using Bluetooth. zIf the printer is connected to and is being used by another device, the printer will bundetectable even if you search for it.zIf the printer is connected to and is being used by another device, no other device wable to connect to the printer.zThe printer driver of the printer you are using may not have been installed correctlyPlease refer to your product instruction manual and re -install the driver.zPlease check to see if the printer has run out of paper, ink or other consumable itemzIf you are using a printer while several Bluetooth devices are connected to the PC, devices may not functional normally. Please disconnect the other devices and try toagain. ImportantPrinter cannot be detectedCannot connect to printerCannot print/garbled print outputUsing a printer$

$Introduction 第 215 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30zPlease refer to "What you need to know about using Bluetooth " for an understandithe basic concepts to be aware of when using Bluetooth. zIf the Bluetooth Headset is connected to and is being used by another device, the Bluetooth Headset will be undetectable even if you search for it.zIf the Bluetooth Headset is connected to and is being used by another device, no otdevice will be able to connect to the Bluetooth Headset. zA Bluetooth connection will be impossible if the Bluetooth Headset is connected topower adaptor.Please remove the power adaptor and re-connect.zUsing a Bluetooth headset with other Bluetooth devices may cause problems such ainterruptions in sound, reduced transfer speed or failure during file transfer, and disconnection of the other Bluetooth devices. We strongly recommend using a Blueheadset on its own, not in connection with other Bluetooth devices.zPlease confirm that the Bluetooth Headset is being operated correctly (for exampleensure that the correct mode (audio or communications) mode has been selected).zPlease confirm that the voice file or CD is being played back normally on your PCzPlease check the volume settings on your Bluetooth Headset and PC.zIf Windows Media Player or another audio-related application is active when you connect your Bluetooth Headset, you may find it impossible to connect properly toBluetooth Headset, or even to use it at all.Please start such applications after you have connected to the Bluetooth Headset.ImportantBluetooth Headset cannot be detectedCannot connect to Bluetooth HeadsetSound cuts out/cannot hear anythingzPlease refer to "What you need to know about using Bluetooth " for an understandiImportantUsing a Bluetooth HeadsetUsing a keyboard or mouse$

$Introduction 第 216 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30the basic concepts to be aware of when using Bluetooth. zIf the keyboard or mouse is connected to and is being used by another device, the keyboard or mouse will be undetectable even if you search for it.zIf the keyboard or mouse is connected to and is being used by another device, no odevice will be able to connect to the keyboard or mouse.Keyboard or mouse cannot be detectedCannot connect to keyboard or mousezPlease refer to "What you need to know about using Bluetooth " for an understandithe basic concepts to be aware of when using Bluetooth. zIf the camera is connected to and is being used by another device, the camera will bundetectable even if you search for it. zIf the camera is connected to and is being used by another device, no other device wbe able to connect to the camera.zThe memory card in the camera may be full.Please make a backup of all your necessary data on alternative media, then delete timages from the memory card, and ascertain how much free space remains. zThe camera may not have been set to remote camera mode (image browse mode, configuration mode, etc).Certain cameras will end the Bluetooth connection automatically if you change thesettings in a mode other than remote camera mode. Please re -connect to the camerwhen you next wish to use the device in remote camera mode. ImportantCamera cannot be detectedCannot connect to cameraImages from the camera can be displayed, but no pictures can be takenCamera images do not appear in windowUsing a camera$

$Introduction 第 217 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30zPlease refer to "What you need to know about using Bluetooth " for an understandithe basic concepts to be aware of when using Bluetooth. zPlease confirm that you have installed ActiveSync v3.7 or higher on your PC.zActiveSync is installed to COM7 as a default. Please refer to " Synchronising information using ActiveSync" and re-configure your ActiveSync connection.If a port other than COM7 has been used, please amend the ActiveSync connectionsettings accordingly.zThe type of file sent to your PDA, as well as the profile used to send the file, may where folders saved on your PDA are located.Examples:Images transferred to your PDA using "Image transfer" > saved in the "Image transfolderImages transferred to your PDA using "File transfer" > saved in the "Shared folderImportantCannot make an ActiveSync connectionCannot locate a saved filezPlease refer to "What you need to know about using Bluetooth " for an understandithe basic concepts to be aware of when using Bluetooth. zIf the mobile telephone is connected to and is being used by another device, the moImportantMobile telephone cannot be detectedUsing a PDAUsing a mobile telephone$

$Introduction 第 218 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30If the mobile telephone is connected to and is being used by another device, the motelephone will be undetectable even if you search for it. zIf the mobile telephone is connected to and is being used by another device, no othdevice will be able to connect to the mobile telephone.zPlease use the appropriate transfer method, according to the profiles supported by ymobile telephone.If OPP is supported: right-click on a file to send itIf BIP is supported: use "Image transfer" under Bluetooth Information Exchanger tsend imageszThe telephone number of the connection (i.e., the telephone number for the access of your Internet service provider) may not be correct. Please check the telephone number.zThe user ID and/or password for the provider with whom you have signed up may been entered incorrectly. Please check the user ID and password.zThe default connection may have been configured with different settings. Please seconnection configured for mobile telephone use as the default connection.zOnce you have registered a mobile telephone as your fax server, you will need to ethe fax settings from the [Printer and Faxes] window in the Control Panel.Please refer to "Using a modem station for fax transmissions " for information on tconfiguration procedure.zThe telephone number of the fax destination may have been entered incorrectly. Plcheck the telephone number.zIf the setting under COM Auto Connect Settings has been set to "Off", a connectionot automatically be established with the modem. Please connect to the mobile telephone manually.zThe fax service may not have been enabled for sending (or receiving).Please check the settings by following the procedure below.1. Open [Printers and Faxes] from the Control Panel, right -click on the [Fax]and then click on [Properties]Cannot connect to mobile telephoneCannot send images to mobile telephoneCannot connect to the InternetCannot send or receive faxes$

$Introduction 第 219 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30The [Fax properties] window will appear.2. Select the [Device] tab, right-click on the modem you wish to use, and theon [Properties] 3. Select the [Send] tab, and then confirm that "Enable device to send" has bechecked.$

$Introduction 第 220 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/304. Select the [Receive] tab, and then confirm that "Enable device to receive" hbeen checked when you wish to receive faxes)5. Click on the [OK] buttonThis glossary provides definitions for Bluetooth -related terminology.You will be able to look up the meanings of any uncertain terms here. A2DP Profile Abbreviation of Advanced Audio Distribution.A Bluetooth profile allowing you to adjust the sound quality of wireless headsets and otaudio devices. AVRCP Profile Abbreviation of Audio/Video Remote Control Profile. A Bluetooth profile enabling remtlf ti tb t d idR t tl d b idbGlossary$

$Introduction 第 221 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30control functions to be sent and received. Remote control commands can be received byBluetooth Utility. Bluetooth Profile A specification that guarantees the connection to the service function of a remote Bluetodevice.For a Bluetooth device to send and receive information to and from another device, bothdevices must support shared profiles designated for each function, such as dial -up networking, faxing, printing and human interface devices. DHCP Abbreviation of Dynamic Host Configuration ProtocolDHCP is a function that automatically sets up IP addresses. This function will allow youavoid having to set up IP addresses on each computer. DUN Profile A Bluetooth profile for Dial-up Networking.This profile enables you to establish a dial -up Bluetooth connection with a wireless mostation, mobile telephone, or similar device.FAX Profile A Bluetooth profile that enables you to establish a Bluetooth connection with a wirelessmodem station, mobile telephone, or similar device to send or receive a fax. FTP Abbreviation of File Transfer Profile. A Bluetooth profile that enables you to browse folders on a wireless device and transferto and from the local device.$

$Introduction 第 222 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30GAVDP Profile Abbreviation of Generic Audio-Video Distribution Profile. This is a Bluetooth profile.HCRP Abbreviation of Hardcopy Cable Replacement Profile. A Bluetooth profile that establishconnection to a device only when you print, unlike SPP (Serial Port Profile). HID Profile Abbreviation of Human Interface Device Profile. A Bluetooth profile that enables you to connect to a wireless mouse, keyboard or other idevice. LAP Abbreviation of LAN Access Profile. A Bluetooth profile that enables you to establish a Bluetooth connection to a LAN accespoint to access a LAN via PPP. OPP Abbreviation of Object Push Profile. A Bluetooth profile that enables you to exchange business cards with a wireless device.$

$Introduction 第 223 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30PasskeyAlso known as a PIN codeThis is a password consisting of up to 16 alphanumeric characters that enables a connecto be established to a wireless device. You need to know the passkey in order to connecdevice that requires authentication.Even when the authentication setting has been disabled in the User Mode Properties of tBluetooth Utility, the passkey entry dialog box will appear automatically if authenticatiorequired, enabling you to authenticate a device. A link key will be created once you havauthenticated a device, eliminating the need for a passkey to connect to that device in thfuture.PairingA security function. In order for Bluetooth devices to authenticate each other, a passkeycode) is entered in each terminal when they are connected for the first time, and a secretbit link key is generated. This action is known as "pairing."SPP Abbreviation of Serial Port Profile.A Bluetooth profile that enables communication with a device through a virtual serial poconfigured for a Bluetooth connection. This can be used for printers and printer adaptersPDAs, using a method different from HCRP or ActiveSync . TCP/IP Abbreviation of Transmission Control Protocol/Internet Protocol.Standard communications protocol (convention for enabling data communication) used Internet. Using the same protocol enables computers to exchange data with each other. vCARD Common standard for electronic business cards.$

$Introduction 第 224 頁，共 224 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30Names, (e)mail addresses, telephone numbers and other information are exchanged in thform of electronic business cards (in *.vcf format), allowing all parties to easily registerother's data in their address books.The standard is extensively compatible with Microsoft Outlook, Lotus Organizer and othmail/schedule management software.$

$Quick Start Guide - Introduction 第 1 頁，共 160 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30The Quick Start Guide is intended to those who wish to get started right away using Bluetooth, and describes basic concepts to be aware of as well as ways to connect to Bluetooth devices.The Quick Start Guide comprises the following items.What you need to know about using BluetoothDescribes the basic concepts you need to be aware of when using Bluetooth devices.It is recommended that you read this section before starting the set-up process. Trying out your Bluetooth deviceDescribes the procedures used for actually configuring and then using your Bluetooth device. Please read this according to your desired purpose and device. TroubleshootingDescribes possible causes and countermeasures to be considered when your Bluetooth device cannot be configured properly, functions abnormally or presents other problems related to its operation. GlossaryExplains the technical jargon used in this guide. You can use a Bluetooth wireless modem to connect to the Internet via a telephone line. →Setting up the modem station→Connecting to the Internet zIn order to connect to the Internet, you must have already signed up with a provider and obtained a connection ID and password. Please ensure you have confirmed the ID, password and telephone number of your provider's access point before you begin the set-up processImportantIntroductionConnecting to the Internet using a modem station [DUN]$

$Quick Start Guide - Introduction 第 2 頁，共 160 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30and telephone number of your providers access point before you begin the setup process. zPlease refer to your instruction manual for information on connecting the modem station to a telephone line. zA Bluetooth passkey (PIN code) is required for you to connect to the modem station. Please make a note of your Bluetooth passkey before you start the set-up process. 1. Turn on the wireless modem station2. Right-click the Bluetooth icon in the task tray, and then click on [Add New Connection] {Alternatively, click [Start]→[All Programs]→[Bluetooth]→[Bluetooth Settings], and then click on [New Connection] from the active [Bluetooth Settings] window. The [Add New Connection Wizard (Welcome to the Add New Connection Wizard)] window will appear. 3. Confirm that [Express Mode] has been selected, and then click on the [Next] buttonSetting up the modem stationProcedureNote$

$Quick Start Guide - Introduction 第 3 頁，共 160 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30The [Add New Connection Wizard (Searching for Bluetooth devices)] window will appear.4. Select the device name of the wireless modem station from [Device List], and then click on the [Next] buttonThe [Add New Connection Wizard (Searching for Services)] window will appear.$

$Quick Start Guide - Introduction 第 4 頁，共 160 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30Once a service has been detected successfully, connection to the device and COM port creation will be performed automatically, after which the [Add New Connection Wizard (Modem Settings)] window will appear.5. If you are connecting to a wireless modem station for the first time, enter the passkey for the modem station under [Bluetooth Passkey (PIN code)], and then click on the [OK] buttonOnce the program has finished searching for the devices, the [Add New Connection Wizard (Device Selection)] window will appear.6. Click on the [Next] buttonCertain modems require you to configure initialization commands separately.Please click on the [Additional initialization Command Settings] button, enter the initialization commands in the following window, and then click on the [OK] button.$

$Quick Start Guide - Introduction 第 5 頁，共 160 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30 {Please refer to the modem or mobile phone instruction manual for further details on the initialization commands. 7. Enter the connection name (optional), telephone number (of your provider's access point), user name and password (as issued by your provider), and then click on the [Finish] button. {The sample entries shown in the window are provided solely for purpose of explanation. Please use your own telephone number, ID and password according to the arrangement with your provider. The settings will be registered, and an icon will appear in the [Bluetooth Settings] window.NoteImportant$

$Quick Start Guide - Introduction 第 6 頁，共 160 頁file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30You can connect to the Internet by following the procedure below if the connection destination registered when you configured the wireless modem has been set as the default connection destination. 1. Start your browser, e-mail application or other application {Please enter the e-mail settings separately if you are going to use e-mail (the set-up method will vary with the application). 2. Enter the URL of the Web page you wish to display and then press the [Enter] key, or use the e-mail tool to send/receive items or perform other activities. The [Dial-up Connection] window will appear.3. Click on the [Connect] button{A connection will be automatically established with the modem station if COM Auto Connect is available. If COM Auto Connect is not available, please manually connect to the modem station. The following message will appear once you have connected to the Internet.4. End the connection The window below will appear if you double-click on the icon in the task bar.Connecting to the InternetImportantImportant$

ASUSTeK Computer HD05UGPZ5 BLUETOOTH MODULE User Manual 3 OF 4

ASUSTeK Computer Inc BLUETOOTH MODULE 3 OF 4

Contents

USER MANUAL 3 OF 4

Navigation menu

Namespaces

Views

Navigation