ASUSTeK Computer HD05UGPZ5 BLUETOOTH MODULE User Manual 3 OF 4

Download:
Mirror Download [FCC.gov]
Document ID	546597
Application ID	DvyuuR1KcETx2k67/LiPlg==
Document Description	USER MANUAL 3 OF 4
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	253.48kB (3168443 bits)
Date Submitted	2005-05-30 00:00:00
Date Available	2005-05-27 00:00:00
Creation Date	2004-11-30 09:24:19
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2005-05-26 16:19:44
Document Title	USER MANUAL 3 OF 4

Introduction
第 154 頁，共 224 頁
Note
This window is an example showing pictures when [Filmstrip] has been selected fr
the [View] menu in Explorer.
Synchronising information using ActiveSync
[SPP]
This section describes how to synchronize information on your PDA (calendars, contacts, inb
etc) with your PC using Microsoft ActiveSync.
When you connect via Bluetooth instead of with a standard cable, you will always be able to
synchronise your data without the hassle of having to connect the cable.
→Connecting using ActiveSync
→Establishing a partnership between ActiveSync and a PDA
→Finishing an ActiveSync connection
→Cancelling a partnership
Important
Please use ActiveSync v.3.7 or higher. Also please establish a partnership between the
devices using a USB or infrared link before you connect via Bluetooth.
Please refer to the ActiveSync Help or other manuals for information on how to use the
application.
Microsoft Outlook 2002 or another schedule management tool must also be installed on
PC.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 155 頁，共 224 頁
Connecting using ActiveSync
Both the PC and PDA must be set up in order for a connection to be established.
■Preparing the PC
Procedure
1. On the PC, click on [Start] →[All Programs]→[Microsoft ActiveSync]
The initial ActiveSync set -up window will appear.
It is assumed in the explanation below that no ActiveSync connections have been
established with other devices.
2. Click [File]→[Connection Settings]
The [Connection Settings] window will appear.
3. Place a check next to [Allow serial cable or infrared connection to this COM por
and then select "COM7".
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 156 頁，共 224 頁
Note
In the standard set -up, the port is configured to "COM7" (refer to Steps (3)
(4) under "Preparing the PDA" below). When using a different port, please
change the port number selected in this window.
■Preparing the PDA
Procedure
1. Tap on the Bluetooth icon in the bottom right of the screen
Important
The graphic above shows an example of a PDA operating window.
The connection procedure may be different depending on the manufacturer
model of PDA you use. Please refer to the product instruction manuals for
further details.
The [Bluetooth Settings] window will open
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 157 頁，共 224 頁
The [Bluetooth Settings] window will open.
The message "Connection not registered" will appear if no Bluetooth device has
registered.
Please tap on [OK] to close the message.
2. Double click on [Tools] →[Search for peripheral components]
The application searches for nearby Bluetooth devices.
3. Tap and hold on the destination PC icon, and then select [Update Services]
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 158 頁，共 224 頁
A search for services will be carried out, and then a list of service names and the
connection status will appear as list in the lower window.
4. Tap and hold on "COM7" from the list of service names, and then select "Registe
ActiveSync".
5. Tap [OK] in the confirmation message window
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 159 頁，共 224 頁
An ActiveSync connection will be initiated.
Establishing a partnership between ActiveSync and a PDA
Once a connection has been successfully established with a PDA, the procedure for
establishing a partnership with the PDA will be started by the ActiveSync application on
PC.
Performing this set -up procedure will enable data to be synchronised between your PC a
PDA.
Procedure
1. In the [New Partnership (Set Up a Partnership)] window, select "Standard
partnership", and then click on the [Next] button
The [New Partnership (Specify Data Synchronisation Method)] window will appe
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 160 頁，共 224 頁
2. Select "Synchronise with this PC", and then click on the [Next] button
The [New Partnership (Select Synchronisation Settings)] window will appear.
3. Select the type of information to be synchronised between your PC and PDA, and
click on the [Next] button
The [New Partnership (Completing Setup)] window will appear.
4. Click on the [Finish] button
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 161 頁，共 224 頁
When you click on the [Finish] button, ActiveSync will begin to synchronise you
information.
[Confirming changes]
↓
(Synchronisation process)
↓
[Synchronisation complete]
While the ActiveSync connection is active, synchronisation will be performed
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 162 頁，共 224 頁
While the ActiveSync connection is active, synchronisation will be performed
whenever information is changed on either the PC or the PDA.
Once a partnership has been established, every time you start your PC (and PDA
thereafter, a Bluetooth connection will be opened and ActiveSync will synchroni
your information.
Finishing an ActiveSync connection
Follow the procedure below on your PDA if you want to end an ActiveSync connection
manually.
Procedure
1. Tap and hold on "COM7" in the Bluetooth Settings window, and select [ActiveSy
Release]
Cancelling a partnership
Follow the procedure below from the ActiveSync window on the PC if you want to canc
partnership between your PC and PDA.
Procedure
1. Click on [File]→"Delete partnership"
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 163 頁，共 224 頁
Click on the [Yes] button when the confirmation message appears.
Note
If you wish to create another ActiveSync connection, you will have to repe
above procedure to re -establish a partnership.
Using a headset to communicate
[HSP]
This section provides a description of how to use a Bluetooth -compatible wireless headset to
communicate (chat) using Microsoft NetMeeting or other software.
→Registering the headset
→Making a connection to the headset
→Disconnecting from the headset
Registering the headset
Procedure
1. Right-click on the Bluetooth icon in the tasktray, then click on [Add New Conne
Wizard]
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 164 頁，共 224 頁
Note
Alternatively, you can click on [Start]>[All Programs]>[Bluetooth]>[Blueto
Settings], then click on [New Connection] in the [Bluetooth Settings] scree
has opened.
The [Add New Connection Wizard (Welcome to the Add New Connection Wizar
screen will appear.
2. Turn the headset power on
Once you have turned on the headset, set the mode to enable a Bluetooth connect
Important
The procedure for operating the headset may differ depending on the
manufacturer and model.
Please consult your user guide for a detailed description of how to operate
unit.
3. Confirm that [Express Mode] has been selected, then click on the [Next] button
The [Add New Connection Wizard (Searching for Bluetooth Devices)] screen wi
appear.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 165 頁，共 224 頁
Once the device search has been completed, the [Add New Connection Wizard (S
a Device)] screen will appear.
4. Select the name of the headset device from the list, then click on the [Next] butto
5. Answering with the headset
If the service has been properly detected, a screen will appear indicating that the
headset is being called, and a tone will accordingly sound in the headset.
Please press the headset switch.
Important
The procedure for operating the headset may differ depending on the
manufacturer and model.
Please consult your user guide for a detailed description of how to operate
unit.
The [Add New Connection Wizard (Configuring (Connecting to Voice Circuit))]
screen will appear, and device configuration will be performed.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 166 頁，共 224 頁
pp
Note
If you are connecting to the headset for the first time, or if another Bluetoo
audio device has not yet been registered, the following [Found New Hardw
Wizard] screen will appear, from which you can proceed to install the drive
If another audio device has already been registered (i.e., the driver has been
installed), you can proceed to Step 9 without having to install the driver.
6. Click on the [Next] button
The [Install Hardware] screen will appear.
7. Click on the [Continue Anyway] button
The following screen will appear automatically. You may disregard it and click o
[Continue Anyway] button.
The [Add New Connection Wizard (Completing the Found New Hardware Wizar
screen, which is the final screen of the installation wizard, will appear.
Click on the [Finish] button
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 167 頁，共 224 頁
8. Click on the [Finish] button
Once driver installation is complete, the [Add New Connection Wizard (Enter
Connection Name)] will appear.
9. Confirm the information you have entered, and click on the [Next] button
The [Add New Connection Wizard (Completing the Add New Connection Wizar
screen will appear.
10. Click on the [Finish] button
The configuration information will be registered, and an icon will be displayed in
[Bluetooth Settings] screen.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 168 頁，共 224 頁
Making a connection to the headset
You can make a connection to the headset from an icon that has been registered in [Blue
Settings].
Important
Before making a connection to the headset, please check that you have turned on th
headset's power, and that it has been enabled for a Bluetooth connection.
Please ensure that the following audio -related applications have been closed before
connect the headset to your PC.
Windows Media Player, BeatJam, InterVideo WinDVD and other music/audi
playback software
Windows Messenger and other e -conferencing software
If you wish to use these applications, please terminate the headset connection befor
launch them.
Procedure
1. Right-click on the headset icon, then click on [Connect].
2. Answer with the headset
A screen will appear indicating that the headset is being called, and a tone will
accordingly sound in the headset.
Please press the headset switch.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 169 頁，共 224 頁
If the connection has been properly established, the icon's appearance will change
indicate a connected state.
You may now launch conferencing and voice -recognition software and use the
headset.
Disconnecting from the headset
Please follow the steps below to disconnect from the headset.
Procedure
1. Right-click on the headset icon in the [Bluetooth Settings] screen, then click on
[Disconnect].
A message will appear, requesting confirmation that you wish to disconnect. Clic
the [Yes] button.
The icon on the [Bluetooth Settings] screen will appear as shown below, indicatin
that the device has been disconnected.
Making a device undiscoverable to other users
For security purposes, you may not wish your device to be detected by other Bluetooth users
procedure for accomplishing this is provided below.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 170 頁，共 224 頁
Procedure
1. Right-click on the Bluetooth icon in the task tray, and click on [Device Propertie
Security]
The [Device Properties] window will appear.
2. Select [Non-discoverable mode] in [Discoverability mode] under the [Security] t
and then click on the [OK] button
Your device will now be undetectable by other users, even when they search for
devices.
Note
Other devices are still able to establish connections with your device even if you ha
enabled the Non-discoverable mode.
Please enable "Non -connectable mode" if you wish to reject connections from othe
devices.
Related topic: " Bluetooth Manager "
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 171 頁，共 224 頁
Encrypting the content of your transmissions
Since Bluetooth communication is conducted wirelessly, there is always the possibility that a
party may be able to intercept your transmissions.
You can use encryption to render the content indecipherable to anyone who manages to inter
it.
Important
Encrypting your transmissions will still not guarantee complete security. Accordingly,
please be aware that transmitting data is conducted with an element of risk for the user
Procedure
1. Right-click on the Bluetooth icon in the task tray, and click on [Device Propertie
Security].
The [Device Properties] window will appear.
2. Select [Link Level Enforced Security] in [Security Mode] under the [Security] ta
a check next to [Encryption], and then click on the [OK] button
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 172 頁，共 224 頁
Note
Once you have configured the security mode, a window will appear when you first
a connection to another device, prompting you to enter a Bluetooth passkey (PIN c
Please click on the [OK] button after you have entered the passkey.
The window in which you enter the passkey will not appear once you have connect
more than two times to the device.
Related topic: " Bluetooth Manager "
Changing the default connection
The "default connection" refers to the dial -up connection configured for use whenever a
connection is made to the Internet.
If several connections have been registered, you can change the default connection by follow
the procedure below.
Procedure
1. Start Internet Explorer
2. Click on [Tools]→[Internet Options...]
The [Internet Options] window will appear
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 173 頁，共 224 頁
The [Internet Options] window will appear.
3. Click on the [Connections] tab
In this window, "Direct Connection" is set as the default, and "Never dial a
connection" has been selected.
Change the settings so that "London A" will always be dialled when you connect
the Internet.
4. Select "Always dial my default connection"
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 174 頁，共 224 頁
5. Click on "London A", and then click on the [Set Default] button
"London A" has been changed to the default connection.
Note
Alternatively, if you wish to connect to the Internet from a LAN in a company or o
environment where a LAN can be accessed, select "Never dial a connection" if you
a dial-up configuration, but do not want dial -up to occur automatically.
When connecting to the Internet via a LAN, you must enter the appropriate LAN
settings under [LAN Settings...].
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 175 頁，共 224 頁
Sending business card data from Outlook
This section describes how to send business card data wirelessly using Microsoft Outlook
Note
The explanation below relates to an example in which Microsoft Outlook 2002 has bee
used to perform the procedure. Subtle differences may arise when using other versions
software.
Sending business card data
You can send business card data directly from the "Contacts" window in Outlook.
Procedure
1. Start Microsoft Outlook, and open the "Contacts" window
2. Double-click on the contact whose details you wish to send as a business card
The details of the contact you selected will appear.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 176 頁，共 224 頁
3. Click on the [to Bluetooth] from the toolbar
The [Device List] window will appear.
Note
If the [to Bluetooth] button does not appear on the toolbar, please refer to
Installing business card -sending functionality in Outlook as an Add -in" be
and change the settings accordingly.
4. Select the destination for the business card data, and then click on the [Send] but
Note
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 177 頁，共 224 頁
Note
If you cannot find the destination device in the list, please click on the
[Searching for devices] button to discover it.
The business card will be sent.
If the business card has been sent successfully, the message below will appear.
Note
If the transmission was unsuccessful, please attempt to send the data once m
after having confirmed the operating conditions (power status, security sett
etc) of the destination device.
■Installing business card -sending functionality in Outlook as an Add -in
You can install one of the functions of the Bluetooth Utility in Outlook as an "Add -in",
will enable you to send business cards from the Outlook toolbar.
Procedure
1. Click on [Tools]-[Options...] in Outlook
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 178 頁，共 224 頁
The [Options] dialog box will appear.
2. Select the [Other] tab, and then click on the [Advanced Options...] button in the
"General" field
The [Advanced Options] dialog box will appear
3. Click on the [COM Add -Ins...] button
The [COM Add-Ins] dialog box will appear.
4. Click on the [Add...] button
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 179 頁，共 224 頁
The [Add Add-In] dialog box will appear.
5. Select "TosBTAddin.dll", and then click on the [OK] button
Note
"TosBTAddin.dll" can be found on the hard drive at the address below.
C:\Program Files\Toshiba\Bluetooth Toshiba Stack
6. Confirm that "Send to Bluetooth" has been added to the list and that a check appe
next to it, and then click on the [OK] button
This will complete the Add in process
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 180 頁，共 224 頁
This will complete the Add -in process.
Manually creating a virtual Bluetooth COM port
In order for a PC to connect to and communicate with a Bluetooth device, the Bluetooth Util
will create a gateway for data to be exchanged between the respective devices. This gateway
known as a "port" (or "virtual COM port").
Since one virtual COM port will be allocated to each device, trouble -free communication w
be possible even if several devices are being used.
When you use the Bluetooth Utility, a virtual COM port will be automatically created on set
however, virtual COM ports can be created manually if so needed.
Note
Bluetooth Manager must be active in order for you to be able to use Bluetooth Local C
Clients and servers
When Bluetooth communications are performed, there will always be a "client/server"
relationship between the various devices. A "client" is a device that sends certain request
another device, while a "server" is a device that provides a service on receipt of such req
from another device.
For example, when a PC issues a print command to a wireless printer, the PC functions a
client, while the printer functions as the server.
When a PDA or other device attempts to receive files located on a PC by means of file
transfer protocol, the PC functions as the server, while the PDA functions as the client.
Virtual Bluetooth COM ports can be created both for clients and servers.
Bluetooth virtual COM port for a client
Virtual COM port used when your device is the client, and requests are sent to ano
device.
Bluetooth virtual COM port for a server
Virtual COM port used when your device is the server, and requests are received fr
another device.
Creating a virtual COM port
Bluetooth virtual COM ports are created according to the procedure below.
Procedure
1. Click on the [Printers and Other Hardware] icon in the Control Panel
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 181 頁，共 224 頁
The [Printers and Other Hardware] window appears.
2. Double-click on the [Bluetooth Local COM] icon
The main Bluetooth Local COM window will appear.
Note
Even when the Control Panel appears in Classic view, please simply click o
[Bluetooth Local COM] icon.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 182 頁，共 224 頁
No such distinction between viewing formats exists in Windows 2000.
3. Click on the [Add...] button
The [Bluetooth Local COM Wizard] window, from where you can create a virtua
COM port, will appear.
Start from this window when creating Bluetooth virtual COM ports for either ser
or clients.
→Creating a Bluetooth virtual COM port for a client
→Creating a Bluetooth virtual COM port for a server
Deleting a virtual COM port
Please follow the procedure below to delete a virtual COM port when it is no longer need
Note
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 183 頁，共 224 頁
Note
You can only delete virtual COM ports created by the Bluetooth Local COM utility
1. Select the port you wish to delete from the [Bluetooth Local COM] window, and
click on the [Delete] button
A message will appear asking you to confirm that you wish to delete the port.
2. Click on the [Yes] button
The port will be deleted.
3. Click on the [OK] button
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 184 頁，共 224 頁
Bluetooth Settings
This section provides detailed information on the [Bluetooth Settings] window.
Main window
Menu
■[Bluetooth] menu
Category
Description
Add New
Connection
Opens the [Add New Connection Wizard] window, and then search
new devices.
Connect
Connects to selected device.
Disconnect
Disconnects from selected device.
Details
Displays detailed information about selected device.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 185 頁，共 224 頁
Delete
Deletes selected device.
Create shortcut
on Desktop
Creates a shortcut icon for the selected device on the Desktop.
Rename
Changes the name of the device you have selected.
Change Icon
Changes the icon of the device you have selected.
COM Auto
Connect Settings
Opens the [COM Auto Connect Settings] window, and allows you t
enable/disable Auto Connect.
Displays the device connection name and port used. Check the box
enable Auto Connect, and remove the check to disable Auto Connec
You will need to connect manually to use a device in the latter case
AV player
selection
Opens [Select AV Payer] window, and allows you to select the
application to be used when you want to play sound files or CDs.
Exit
Closes the [Bluetooth Settings] window.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 186 頁，共 224 頁
■[View] menu
Category
Large icons
Description
Changes the way icons are displayed on a device.
Small icons
List
Details
■[Help] menu
Category
Description
Help
Opens the Bluetooth Utility User Guide.
Version
Displays the version information for Bluetooth Settings.
Device List
Displays a list of devices that have been registered in [Bluetooth Settings].
Function buttons
Category
Description
New Connection
Opens [Add New Connection Wizard] window.
Details...
Shows details of selected device.
Delete
Deletes selected device.
One-touch connection to Bluetooth devices
Creating a Shortcut
If you have created a shortcut icon on the Desktop, you can easily establish a connection to a
device that has been registered using Bluetooth Settings without having to open the Bluetooth
Settings window.
Procedure
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 187 頁，共 224 頁
Procedure
1. Right-click on Bluetooth icon in task tray and click on [Bluetooth Settings]
Note
Alternatively, you can click [Start] →[All Programs]→[Bluetooth] →[Bluetoot
Settings].
The [Bluetooth Settings] screen will appear, from where you can create a Shortcut en
"Bluetooth Mouse."
2. Right-click on the [BT-Mouse-01] icon, and then click on [Create Shortcut on Deskt
A shortcut icon entitled "BT -Mouse-01" will appear on the Desktop.
■Establishing a connection from the Shortcut
1. Double-click on the "BT-Mouse-01" icon from the Desktop
The [Bluetooth Settings] window will open.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 188 頁，共 224 頁
2. Turn on the mouse, set it to Bluetooth -connectable mode, and then click on the [OK
button in the [Bluetooth Settings] window.
The mouse will be connected.
Manually connecting to a Bluetooth device
After a keyboard or mouse (HID profile), printer (HCRP or SPP profiles), or other device ha
been set up for the first time, subsequent connections will be automatically restored wheneve
operate the device, print out a document from the PC, or perform another similar activity.
Should the connection not have been properly restored, please establish a manual connection
the device using the procedure below.
Procedure
1. Right-click on Bluetooth icon in task tray and click on [Bluetooth Settings]
Note
Alternatively, click [Start] →[All Programs]→[Bluetooth]→[Bluetooth Setting
The [Bluetooth Settings] screen will appear, from where you can create a Shortcut en
"BT Mouse."
2. Right-click on the [BT-Mouse-01] icon, and then click on the [Connect] button
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 189 頁，共 224 頁
The [Bluetooth Settings] window will open.
3. Turn on the mouse, enable Bluetooth -connection mode, and click on the [OK] button
the [Bluetooth Settings] window.
The mouse will be connected.
Note
If you wish to manually disconnect a device, right -click on its icon and click
[Disconnect].
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 190 頁，共 224 頁
When the following message appears, click on the [Yes] button.
Changing a connection icon
You can change a device icon that has been registered on the Bluetooth Settings screen.
Procedure
1. Right-click on the Bluetooth icon in the task tray, and then click on [Bluetooth Settin
Note
Alternatively, click [Start] →[All Programs]→[Bluetooth]→[Bluetooth Setting
The [Bluetooth Settings] window will appear. Now try to change the icon for "My
Mobile."
2. Right-click on the "My Mobile" icon, and then click on [Change Icon]
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 191 頁，共 224 頁
A list of available icons will appear.
3. Select the
icon, and then click on the [OK] button
The new icon will appear.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 192 頁，共 224 頁
Changing a connection icon name
You can change a the name of a device icon that has been registered on the Bluetooth Setting
screen.
Procedure
1. Right-click on the Bluetooth icon in the task tray, and then click on [Bluetooth Settin
Note
Alternatively, click [Start] →[All Programs]→[Bluetooth]→[Bluetooth Setting
The [Bluetooth Settings] window will appear. Now try to change the connection nam
"My Mobile" to "Pocket PC."
2. Right-click on "My Mobile", and then click on [Change Name]
You will now be able to enter a name.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 193 頁，共 224 頁
3. Enter "Pocket PC", and then hit the [Enter] key
The new name will appear.
Bluetooth Manager
This section provides detailed information on the settings categories in Bluetooth Manager.
Main menu
Category
Description
Bluetooth
Settings
Opens [Bluetooth Settings] window.
Wireless File
Transfer
Open the [Wireless File Transfer] window.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 194 頁，共 224 頁
Remote Camera
Open the [Remote Camera] window.
Add New
Connection
Opens the [Add New Connection Wizard] window.
Device
Displays Bluetooth device information on your PC.
Properties&Security
[General] tab
Allows you to confirm the name, address and other settings displ
other devices.
Note
[Device Name] is the only category able to be changed. If y
wish to change the name of a device, enter the new name, a
click on the [OK] or [Apply] button.
Click on the [Default] button to restore the initial settings.
[Security] tab
Security-related (user) settings can be configured under this tab.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 195 頁，共 224 頁
Note
Click on the [Default] button to restore the initial settings.
Category
Nondiscoverable
Discoverability mode
mode
Discoverable
mode
Connectability
mode
Description
Other devices will not be
able to detect yours.
Other devices will be able
to detect yours.
Nonconnectable
mode
Other devices will not be
able to connect to yours.1)
Connectable
mode
Other devices will be able
to connect to yours.
Non-pairable
mode2)
You will not receive
pairing requests initiated
from remote devices.
Pairable mode
You will receive pairing
requests initiated from
remote devices.
Non-secure
mode
No security will be
enforced.
Link Level
Security
Enforced3)
Requires Bluetooth passkey
(PIN code) to be entered on
connection with another
device.
Encryption
Encrypts data to be
transmitted.
Pairing mode
Security
mode
1) Selecting Non-connectable mode will cause connection reques
rejected from any device, including registered ones. Device detec
will still be possible.
2) Selecting Non-pairable mode will make it impossible to bond
another device in a new connection relationship. Connection will
possible when a request has been received from a registered devi
Device detection will still be possible.
3) Devices to which you have initially connected by entering a P
will not require you to do so for future connections. Connection w
be possible even if Link Level Security has been selected.
Power off
Turns off Bluetooth
(Turned off)
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 196 頁，共 224 頁
Important
Communication using Bluetooth will be impossible once it
been turned off. When you next wish to use Bluetooth, plea
right-click on the Bluetooth icon in the task tray, and then c
[Power ON].
→
(Turned on)
Service
Properties
Ensures security against various kinds of access from remote dev
Here you can enable or disable the following four typical service
are accessed remotely.
Note
This function is designed to provide robust security against
from remote devices. The "enable/disable" controls only re
access made from remote devices. You will still be able to
remote devices from your local device, regardless of the in
settings.
Remove the tick from each button to disable the related (se
function.
Category
Bluetooth Information
Exchange Service
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
Description
Ticking the box enables a (server
function that allows files, images,
business cards to be transferred fr
remote device using Bluetooth
Information Exchanger.
2004/11/30
Introduction
第 197 頁，共 224 頁
PAN Networking Service
Ticking the box enables a (server
function that allows networking to
performed from a remote device u
PAN Networking Service.
Bluetooth COM Port
Service
Ticking the box enables a (server
function that allows COM Service
performed from a remote location
the Serial Port Service.
AV Remote Control
Service
Ticking the box enables a (server
function that allows remote contro
performed from a remote device u
AV Remote Control Service.
Help
Displays the Bluetooth Utility User Guide.
Exit
Exits Bluetooth Manager.
Important
When you exit Bluetooth Manager, Bluetooth communicati
be disabled. When you next wish to use Bluetooth, please c
[Start]→[All Programs]→[Bluetooth]→[Bluetooth Setting
Windows 2000, click on [Start]→[Programs]→[Bluetooth]
[Bluetooth Settings]).
Bluetooth Information Exchanger
This section provides detailed information on the settings categories in Bluetooth Information
Exchanger.
Main window
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 198 頁，共 224 頁
Bluetooth menu
Category
Description
Device Discovery Detects Bluetooth devices.
Configuration
Allows detailed setting of categories related to Bluetooth Informati
Exchanger.
-[General] tab
-[Mode] tab
-[Inbox/Business Card] tab
-[Shared folder] tab
-[Image box] tab
-[Associate] tab
-[Transfer mode] tab
-[Service security] tab
-[Service class] tab
-[Information] tab
-[Version] tab
Help
Displays Bluetooth Utility User Guide.
Data exchange folders
Three folders are available for data exchange: "Image transfer", "File transfer" and "Obje
Push".
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 199 頁，共 224 頁
Category
Description
Click on the icon to display a list of devices. "Image box" is a folder on
transferring images.
Click on the icon to display a list of devices. "Shared folder" is a share
transferring files.
Click on the icon to display a list of devices. "Inbox" is a folder on you
business cards.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 200 頁，共 224 頁
Remote Camera
This section provides detailed information on the settings categories in Remote Camera.
Main window
Menu
■[Bluetooth] menu
Category
Description
Device Search
Searches for remote cameras.
Properties
[Filter for Search Devices]
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 201 頁，共 224 頁
The program may discover devices other than digital cameras, depe
on which profiles are supported by those devices.
Adjusting the setting to "Loose filtering" will increase the likelihoo
devices other than those intended will be detected.
The further you slide the setting towards "Tight filtering", the strict
will be the criteria determining device detection, and the lower the
likelihood will be that irrelevant devices will be included.
Please adjust the filtration level according to the results of the searc
[Multi Shot]
Allows you to set the number of consecutive images captured by yo
digital camera in the dialog box below (between 2 and 16 inclusive
[Pixel Size]
Images will be sent to your PC after having been automatically
converted to the size specified in the dialog box below, regardless o
size of the original image data.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 202 頁，共 224 頁
[Inbox settings]
Opens the "Browse folders..." dialog box and allows you to select t
folder where you would like your captured images to be saved.
Exit
Exits Remote Camera.
■[Help] menu
Category
Image monitor
version
information
Description
Displays version information for the image monitor.
List of cameras
A list of cameras that have been registered as remote cameras will be displayed.
[Camera Search...] button
Clicking on this button will execute a search for remote cameras.
Display images
Images transferred to the PC from a remote camera will be displayed.
[Explorer...] button
Clicking on this button will display the folders on the hard drive where images that have
transferred to the PC have been stored.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 203 頁，共 224 頁
Note
A folder for saving your images will be created automatically.
Camera operation window
Camera images
Images as seen through the lens of your remote camera will be displayed.
Display magnification
The size of the operating window display can be adjusted from 100% (1x) to 300% (3x).
Important
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 204 頁，共 224 頁
Increasing the size of the operating window will impede its ability to display image
and will have an adverse effect on other processes being performed by your PC. Pl
adjust the magnification as appropriate for your intended use.
[Explorer...] button
Clicking on this button will display the folders on the hard drive where images that have
transferred to the PC have been stored.
Shutter button (consecutive images)
Clicking this button will cause the camera to take the number of images specified in
[Consecutive image settings] under the [Bluetooth] menu and then send those images to y
PC.
Shutter button (single images)
Clicking this button will cause the camera to take one picture and then send the image to
PC.
Bluetooth Local COM
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 205 頁，共 224 頁
This section provides detailed information on the settings categories in Bluetooth Local COM
Main window
Port
Displays a list of configured ports.
Description
Displays the function of each port.
Ports displayed as "Toshiba BT Port (COMxx)" are TOSHIBA Bluetooth virtual COM p
Owner
Displays the application used to create those COM ports.
The following information will appear for ports created by Bluetooth Local COM.
COM port for client
Local COM - Client
COM port for server Local COM - Server [(name of service supplied by port)]
Function buttons
Category
Add
Description
Starts the Add COM Port Wizard.
Note
Delete
There can be up to 64 ports. If COM ports 1 to 64 already exist, you w
not be able to add another port.
Deletes selected port.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 206 頁，共 224 頁
Note
OK
You can only delete COM ports created by Bluetooth Local COM.
Click on this button to confirm settings information, and close the Bluetooth
Local COM window.
Wireless File Transfer
This section provides detailed information on the settings categories in Wireless File Transfe
Main window
Files/folders
Displays a list of files/folders to be sent.
Devices to which data can be sent
Displays other devices to which you are able to send files. Files will be sent to those dev
that have been checked.
Name
Displays name of destination devices.
Connection method
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 207 頁，共 224 頁
Connection method
Displays method used to connect to other devices.
Note
If a device to which you would like to send data is not listed, you can click on the
[Search] button to search for other devices.
Function buttons
Category
Description
Add
Displays the window below, from where you can add files and/or folders yo
would like to send.
Delete
By selecting a file from the list and clicking on the "Delete" button, you can
remove that file (i.e., the file will not be sent) .
Search
Searches for Bluetooth devices.
Cancel
Closes the "Wireless File Transfer" window.
Send
Sends a file.
Troubleshooting
This section describes possible causes and countermeasures to be considered when your Blue
device cannot be configured properly, functions abnormally or presents other problems relate
its operation.
Basic understanding
The section "What you need to know about using Bluetooth " describes the basic concep
be aware of when using Bluetooth. Should you still encounter problems after having read
through this information, please refer to the following list, which has been arranged acco
to application.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 208 頁，共 224 頁
to application.
Troubleshooting by application
General operation of the Bluetooth Utility
Using a wireless modem station
Using an access point
Using a printer
Using a Bluetooth headset
Using a keyboard or mouse
Using a camera
Using a PDA
Using a mobile telephone
General operation of the Bluetooth Utility
Important
Please refer to " What you need to know about using Bluetooth " for an understandi
the basic concepts to be aware of when using Bluetooth.
Bluetooth Manager
Bluetooth icon does not appear in task tray
If the Bluetooth icon does not appear in the task tray, Bluetooth Manager will not b
active, which will prevent you from being able to use any of the functions of the
Bluetooth Utility.
Start the utilities as instructed below to enable Bluetooth Manager to start automati
and allow all functions to be utilized.
Bluetooth Settings
(from Windows XP)
[Start] > [All Programs] > [Bluetooth] > [Bluetooth Settings]
(from Windows 2000)
[Start] > [Programs] > [Bluetooth] > [Bluetooth Settings]
Remote Camera
(from Windows XP)
[Start] > [All Programs] > [Bluetooth] > [Remote Camera]
(from Windows 2000)
[Start] > [Programs] > [Bluetooth] > [Remote Camera]
Wireless File Transfer
(from Windows XP)
[Start] > [All Programs] > [Bluetooth] > [Wireless File Transfer]
(from Windows 2000)
[Start] > [Programs] > [Bluetooth] > [Wireless File Transfer]
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 209 頁，共 224 頁
Bluetooth Settings
Clicking on the [New Connection] button brings up the message "Unable to prepare
Bluetooth."
The wireless communication switch is turned off.
Please switch it on.
Remote device(s) cannot be detected
The other device(s) may have been set to Non -discoverable mode.
Please check the mode settings on the device.
Services on a remote device are undiscoverable
The other device may be using a profile that is not supported by the Bluetooth Util
Please check the profile being used on the other device.
The following profiles are compatible with Bluetooth Settings.
DUN, FAX, LAP, SPP, HID, HCRP, FTP, OPP, HSP, PAN and BIP
Devices running profiles other than those above will not be able to be registered wi
Bluetooth Settings.
Bluetooth Information Exchanger
An error occurs when you try to send a file using the right -click menu.
Select and right-click on a file, and then you can choose either the FTP or OPP pro
use when you click on [Send to Bluetooth Device].
If neither profile is supported by the destination device, the file will not be able to b
sent from the right -click menu.
The transmission will also fail if you use FTP to send a file to a device that only
supports the OPP profile.
Should this occur, please click on [Bluetooth] →[Profiles] under [Bluetooth Inform
Exchanger] to configure the Transfer mode.
Cannot open shared folder on remote device using [File Transfer].
The other device may have a certain security level enforced (Non -connectable mo
etc). Please confirm the security settings of the other device.
Please enter the correct password if you are asked to enter one.
Remote Camera
See "Using a camera"
Bluetooth Local COM
Cannot add port
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 210 頁，共 224 頁
A maximum of 64 virtual COM ports can be added. You will be unable to add ano
port if 64 ports have already been configured.
Using a wireless modem station
Important
Please refer to " What you need to know about using Bluetooth " for an understandi
the basic concepts to be aware of when using Bluetooth.
Modem station cannot be detected
If the modem station is connected to and is being used by another device, the mode
station will be undetectable even if you search for it.
Cannot connect to modem station
If the modem station is connected to and is being used by another device, no other
device will be able to connect to the modem station.
Bluetooth passkey entry failed
The Bluetooth passkey (PIN code) comprises a sequence of alphanumeric character
with the letters able to be rendered in upper and lower case.
If [Caps Lock] is on, the Bluetooth passkey may not be able to be entered correctly
Cannot connect to telephone line
Please ensure that the telephone cable is connected from the socket to the "LINE"
terminal on the modem station.
Note
If the telephone cable has come loose because it has not been fully inserted in
the socket, the resulting poor contact may prevent data from being transmitte
accurately.
Communication will be impossible if the interior of the cable has been broke
Please replace the cable with another one.
Please ensure that the two slide switches on the underside of the main unit have be
to the "NORMAL" and "MODEM" positions respectively.
h I
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 211 頁，共 224 頁
Cannot connect to the Internet
The telephone number of the connection (i.e., the telephone number for the access
of your Internet service provider) may not be correct. Please check the telephone
number.
The user ID and/or password for the provider with whom you have signed up may
been entered incorrectly. Please check the user ID and password.
The default connection may have been configured with different settings. Please se
connection configured for mobile telephone use as the default connection .
When you place a call using a company switchboard or other exchange, the system
require you to enter a "0" before the telephone number itself. Please check the type
telephone line you are using.
Cannot send or receive faxes
Once you have registered a wireless modem station as your fax server, you will nee
enter the fax settings from the [Printer and Faxes] window in the Control Panel.
Please refer to " Using a modem station for fax transmissions " for information on t
configuration procedure.
The telephone number of the fax destination may have been entered incorrectly. Pl
check the telephone number.
If the setting under COM Auto Connect Settings has been set to "Off", a connectio
not automatically be established with the modem. Please connect to the modem
manually.
When you place a call using a company switchboard or other exchange, the system
require you to enter a "0" before the telephone number itself. Please check the type
telephone line you are using.
The fax service may not have been enabled for sending (or receiving).
Please check the settings by following the procedure below.
1. Open [Printers and Faxes] from the Control Panel, right -click on the [Fax]
and then click on [Properties]
The [Fax properties] window will appear.
2. Select the [Device] tab, right -click on the modem you wish to use, and the
on [Properties]
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 212 頁，共 224 頁
3. Select the [Send] tab, and then confirm that "Enable device to send" has be
checked.
4. Select the [Receive] tab, and then confirm that "Enable device to receive" h
been checked (when you wish to receive faxes)
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 213 頁，共 224 頁
5. Click on the [OK] button
Using an access point
Important
Please refer to " What you need to know about using Bluetooth " for an understandi
the basic concepts to be aware of when using Bluetooth.
Access point cannot be detected
If the access point is connected to and is being used by another device, the access p
will be undetectable even if you search for it.
Cannot connect to access point
If the access point is connected to and is being used by another device, no other de
will be able to connect to the access point.
Cannot connect to LAN
The LAN cable may not be properly connected to the access point. Please check th
connection status.
Note
If the LAN cable has come loose because it has not been fully inserted into th
socket, the resulting poor contact may prevent data from being transmitted
accurately.
Communication will be impossible if the interior of the LAN cable has been
broken Please replace the cable with another one
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 214 頁，共 224 頁
broken. Please replace the cable with another one.
The access point may not have been configured correctly, and may not be able to
maintain the connection to the LAN.
Please refer to the product instruction manual for information on how to configure
access point.
Cannot connect to the Internet
If you are using a LAN to connect to the Internet, the LAN environment of the com
or location where you are trying to establish the connection may require you to con
via a proxy server .
Please click here for information on configuring a proxy server.
Using a printer
Important
Please refer to " What you need to know about using Bluetooth " for an understandi
the basic concepts to be aware of when using Bluetooth.
Printer cannot be detected
If the printer is connected to and is being used by another device, the printer will b
undetectable even if you search for it.
Cannot connect to printer
If the printer is connected to and is being used by another device, no other device w
able to connect to the printer.
Cannot print/garbled print output
The printer driver of the printer you are using may not have been installed correctly
Please refer to your product instruction manual and re -install the driver.
Please check to see if the printer has run out of paper, ink or other consumable item
If you are using a printer while several Bluetooth devices are connected to the PC,
devices may not functional normally. Please disconnect the other devices and try to
again.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 215 頁，共 224 頁
Using a Bluetooth Headset
Important
Please refer to " What you need to know about using Bluetooth " for an understandi
the basic concepts to be aware of when using Bluetooth.
Bluetooth Headset cannot be detected
If the Bluetooth Headset is connected to and is being used by another device, the
Bluetooth Headset will be undetectable even if you search for it.
Cannot connect to Bluetooth Headset
If the Bluetooth Headset is connected to and is being used by another device, no ot
device will be able to connect to the Bluetooth Headset.
A Bluetooth connection will be impossible if the Bluetooth Headset is connected to
power adaptor.
Please remove the power adaptor and re -connect.
Sound cuts out/cannot hear anything
Using a Bluetooth headset with other Bluetooth devices may cause problems such a
interruptions in sound, reduced transfer speed or failure during file transfer, and
disconnection of the other Bluetooth devices. We strongly recommend using a Blue
headset on its own, not in connection with other Bluetooth devices.
Please confirm that the Bluetooth Headset is being operated correctly (for example
ensure that the correct mode (audio or communications) mode has been selected).
Please confirm that the voice file or CD is being played back normally on your PC
Please check the volume settings on your Bluetooth Headset and PC.
If Windows Media Player or another audio -related application is active when you
connect your Bluetooth Headset, you may find it impossible to connect properly to
Bluetooth Headset, or even to use it at all.
Please start such applications after you have connected to the Bluetooth Headset.
Using a keyboard or mouse
Important
Please refer to " What you need to know about using Bluetooth " for an understandi
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 216 頁，共 224 頁
the basic concepts to be aware of when using Bluetooth.
Keyboard or mouse cannot be detected
If the keyboard or mouse is connected to and is being used by another device, the
keyboard or mouse will be undetectable even if you search for it.
Cannot connect to keyboard or mouse
If the keyboard or mouse is connected to and is being used by another device, no o
device will be able to connect to the keyboard or mouse.
Using a camera
Important
Please refer to " What you need to know about using Bluetooth " for an understandi
the basic concepts to be aware of when using Bluetooth.
Camera cannot be detected
If the camera is connected to and is being used by another device, the camera will b
undetectable even if you search for it.
Cannot connect to camera
If the camera is connected to and is being used by another device, no other device w
be able to connect to the camera.
Images from the camera can be displayed, but no pictures can be taken
The memory card in the camera may be full.
Please make a backup of all your necessary data on alternative media, then delete t
images from the memory card, and ascertain how much free space remains.
Camera images do not appear in window
The camera may not have been set to remote camera mode (image browse mode,
configuration mode, etc).
Certain cameras will end the Bluetooth connection automatically if you change the
settings in a mode other than remote camera mode. Please re -connect to the camer
when you next wish to use the device in remote camera mode.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 217 頁，共 224 頁
Using a PDA
Important
Please refer to " What you need to know about using Bluetooth " for an understandi
the basic concepts to be aware of when using Bluetooth.
Cannot make an ActiveSync connection
Please confirm that you have installed ActiveSync v3.7 or higher on your PC.
ActiveSync is installed to COM7 as a default. Please refer to " Synchronising
information using ActiveSync " and re-configure your ActiveSync connection.
If a port other than COM7 has been used, please amend the ActiveSync connection
settings accordingly.
Cannot locate a saved file
The type of file sent to your PDA, as well as the profile used to send the file, may
where folders saved on your PDA are located.
Examples:
Images transferred to your PDA using "Image transfer" > saved in the "Image trans
folder
Images transferred to your PDA using "File transfer" > saved in the "Shared folder
Using a mobile telephone
Important
Please refer to " What you need to know about using Bluetooth " for an understandi
the basic concepts to be aware of when using Bluetooth.
Mobile telephone cannot be detected
If the mobile telephone is connected to and is being used by another device, the mo
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 218 頁，共 224 頁
If the mobile telephone is connected to and is being used by another device, the mo
telephone will be undetectable even if you search for it.
Cannot connect to mobile telephone
If the mobile telephone is connected to and is being used by another device, no oth
device will be able to connect to the mobile telephone.
Cannot send images to mobile telephone
Please use the appropriate transfer method, according to the profiles supported by y
mobile telephone.
If OPP is supported: right -click on a file to send it
If BIP is supported: use "Image transfer" under Bluetooth Information Exchanger t
send images
Cannot connect to the Internet
The telephone number of the connection (i.e., the telephone number for the access
of your Internet service provider) may not be correct. Please check the telephone
number.
The user ID and/or password for the provider with whom you have signed up may
been entered incorrectly. Please check the user ID and password.
The default connection may have been configured with different settings. Please se
connection configured for mobile telephone use as the default connection .
Cannot send or receive faxes
Once you have registered a mobile telephone as your fax server, you will need to e
the fax settings from the [Printer and Faxes] window in the Control Panel.
Please refer to " Using a modem station for fax transmissions " for information on t
configuration procedure.
The telephone number of the fax destination may have been entered incorrectly. Pl
check the telephone number.
If the setting under COM Auto Connect Settings has been set to "Off", a connectio
not automatically be established with the modem. Please connect to the mobile
telephone manually.
The fax service may not have been enabled for sending (or receiving).
Please check the settings by following the procedure below.
1. Open [Printers and Faxes] from the Control Panel, right -click on the [Fax]
and then click on [Properties]
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 219 頁，共 224 頁
The [Fax properties] window will appear.
2. Select the [Device] tab, right -click on the modem you wish to use, and the
on [Properties]
3. Select the [Send] tab, and then confirm that "Enable device to send" has be
checked.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 220 頁，共 224 頁
4. Select the [Receive] tab, and then confirm that "Enable device to receive" h
been checked when you wish to receive faxes)
5. Click on the [OK] button
Glossary
This glossary provides definitions for Bluetooth -related terminology.
You will be able to look up the meanings of any uncertain terms here.
A2DP Profile
Abbreviation of Advanced Audio Distribution.
A Bluetooth profile allowing you to adjust the sound quality of wireless headsets and ot
audio devices.
AVRCP Profile
Abbreviation of Audio/Video Remote Control Profile. A Bluetooth profile enabling rem
t l f ti
t b
t d
i d R
t l
i db
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 221 頁，共 224 頁
control functions to be sent and received. Remote control commands can be received by
Bluetooth Utility.
Bluetooth Profile
A specification that guarantees the connection to the service function of a remote Blueto
device.
For a Bluetooth device to send and receive information to and from another device, both
devices must support shared profiles designated for each function, such as dial -up
networking, faxing, printing and human interface devices.
DHCP
Abbreviation of Dynamic Host Configuration Protocol
DHCP is a function that automatically sets up IP addresses. This function will allow you
avoid having to set up IP addresses on each computer.
DUN Profile
A Bluetooth profile for Dial -up Networking.
This profile enables you to establish a dial -up Bluetooth connection with a wireless mo
station, mobile telephone, or similar device.
FAX Profile
A Bluetooth profile that enables you to establish a Bluetooth connection with a wireless
modem station, mobile telephone, or similar device to send or receive a fax.
FTP
Abbreviation of File Transfer Profile.
A Bluetooth profile that enables you to browse folders on a wireless device and transfer
to and from the local device.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 222 頁，共 224 頁
GAVDP Profile
Abbreviation of Generic Audio -Video Distribution Profile. This is a Bluetooth profile.
HCRP
Abbreviation of Hardcopy Cable Replacement Profile. A Bluetooth profile that establish
connection to a device only when you print, unlike SPP (Serial Port Profile).
HID Profile
Abbreviation of Human Interface Device Profile.
A Bluetooth profile that enables you to connect to a wireless mouse, keyboard or other i
device.
LAP
Abbreviation of LAN Access Profile.
A Bluetooth profile that enables you to establish a Bluetooth connection to a LAN acces
point to access a LAN via PPP.
OPP
Abbreviation of Object Push Profile.
A Bluetooth profile that enables you to exchange business cards with a wireless device.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 223 頁，共 224 頁
Passkey
Also known as a PIN code
This is a password consisting of up to 16 alphanumeric characters that enables a connec
to be established to a wireless device. You need to know the passkey in order to connec
device that requires authentication.
Even when the authentication setting has been disabled in the User Mode Properties of t
Bluetooth Utility, the passkey entry dialog box will appear automatically if authenticatio
required, enabling you to authenticate a device. A link key will be created once you hav
authenticated a device, eliminating the need for a passkey to connect to that device in th
future.
Pairing
A security function. In order for Bluetooth devices to authenticate each other, a passkey
code) is entered in each terminal when they are connected for the first time, and a secret
bit link key is generated. This action is known as "pairing."
SPP
Abbreviation of Serial Port Profile.
A Bluetooth profile that enables communication with a device through a virtual serial po
configured for a Bluetooth connection. This can be used for printers and printer adapters
PDAs, using a method different from HCRP or ActiveSync .
TCP/IP
Abbreviation of Transmission Control Protocol/Internet Protocol.
Standard communications protocol (convention for enabling data communication) used
Internet. Using the same protocol enables computers to exchange data with each other.
vCARD
Common standard for electronic business cards.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Introduction
第 224 頁，共 224 頁
Names, (e)mail addresses, telephone numbers and other information are exchanged in th
form of electronic business cards (in *.vcf format), allowing all parties to easily register
other's data in their address books.
The standard is extensively compatible with Microsoft Outlook, Lotus Organizer and oth
mail/schedule management software.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm
2004/11/30
Quick Start Guide - Introduction
第 1 頁，共 160 頁
Introduction
The Quick Start Guide is intended to those who wish to get started right away using Bluetooth, and
describes basic concepts to be aware of as well as ways to connect to Bluetooth devices.
The Quick Start Guide comprises the following items.
What you need to know about using Bluetooth
Describes the basic concepts you need to be aware of when using Bluetooth devices.
It is recommended that you read this section before starting the set-up process.
Trying out your Bluetooth device
Describes the procedures used for actually configuring and then using your Bluetooth
device. Please read this according to your desired purpose and device.
Troubleshooting
Describes possible causes and countermeasures to be considered when your Bluetooth
device cannot be configured properly, functions abnormally or presents other problems
related to its operation.
Glossary
Explains the technical jargon used in this guide.
Connecting to the Internet using a modem station
[DUN]
You can use a Bluetooth wireless modem to connect to the Internet via a telephone line.
→Setting up the modem station
→Connecting to the Internet
Important
In order to connect to the Internet, you must have already signed up with a provider and
obtained a connection ID and password. Please ensure you have confirmed the ID, password
and telephone number of your provider's access point before you begin the set-up process
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 2 頁，共 160 頁
and telephone number of your provider s access point before you begin the set up process.
Please refer to your instruction manual for information on connecting the modem station to a
telephone line.
A Bluetooth passkey (PIN code) is required for you to connect to the modem station. Please
make a note of your Bluetooth passkey before you start the set-up process.
Setting up the modem station
Procedure
1. Turn on the wireless modem station
2. Right-click the Bluetooth icon in the task tray, and then click on [Add New
Connection]
Note
Alternatively, click [Start]→[All Programs]→[Bluetooth]→[Bluetooth Settings],
and then click on [New Connection] from the active [Bluetooth Settings] window.
The [Add New Connection Wizard (Welcome to the Add New Connection Wizard)]
window will appear.
3. Confirm that [Express Mode] has been selected, and then click on the [Next] button
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 3 頁，共 160 頁
The [Add New Connection Wizard (Searching for Bluetooth devices)] window will
appear.
4. Select the device name of the wireless modem station from [Device List], and then
click on the [Next] button
The [Add New Connection Wizard (Searching for Services)] window will appear.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 4 頁，共 160 頁
Once a service has been detected successfully, connection to the device and COM port
creation will be performed automatically, after which the [Add New Connection Wizard
(Modem Settings)] window will appear.
5. If you are connecting to a wireless modem station for the first time, enter the passkey
for the modem station under [Bluetooth Passkey (PIN code)], and then click on the
[OK] button
Once the program has finished searching for the devices, the [Add New Connection
Wizard (Device Selection)] window will appear.
6. Click on the [Next] button
Certain modems require you to configure initialization commands separately.
Please click on the [Additional initialization Command Settings] button, enter the
initialization commands in the following window, and then click on the [OK] button.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 5 頁，共 160 頁
Note
Please refer to the modem or mobile phone instruction manual for further details
on the initialization commands.
7. Enter the connection name (optional), telephone number (of your provider's access
point), user name and password (as issued by your provider), and then click on the
[Finish] button.
Important
The sample entries shown in the window are provided solely for purpose of
explanation. Please use your own telephone number, ID and password according
to the arrangement with your provider.
The settings will be registered, and an icon will appear in the [Bluetooth Settings]
window.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 6 頁，共 160 頁
Connecting to the Internet
You can connect to the Internet by following the procedure below if the connection destination
registered when you configured the wireless modem has been set as the default connection
destination.
1. Start your browser, e -mail application or other application
Important
Please enter the e-mail settings separately if you are going to use e-mail (the setup method will vary with the application).
2. Enter the URL of the Web page you wish to display and then press the [Enter] key, or
use the e-mail tool to send/receive items or perform other activities.
The [Dial-up Connection] window will appear.
3. Click on the [Connect] button
Important
A connection will be automatically established with the modem station if COM
Auto Connect is available. If COM Auto Connect is not available, please
manually connect to the modem station.
The following message will appear once you have connected to the Internet.
4. End the connection
The window below will appear if you double-click on the
icon in the task bar.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2004:11:30 09:24:19Z
Modify Date                     : 2005:05:26 16:19:44+08:00
Page Count                      : 77
Creation Date                   : 2004:11:30 09:24:19Z
Mod Date                        : 2005:05:26 16:19:44+08:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Metadata Date                   : 2005:05:26 16:19:44+08:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools