ASUSTeK Computer T200 3.5G Modular Transmitter User Manual Updated Manual

ASUSTeK Computer Inc 3.5G Modular Transmitter Updated Manual

Updated Manual

Classification Confidential Doc Number Date June 23, 2007 Version Draft v0.2 E-Tool for EMP U360 Operating Manual ASUSTeK Computer Inc. Mobile Communication Business Unit R&D Div.1 Writer：Kevin Hsu & Jim Reviser：Aden Chang
ASUSTeK Strictly Confidential 1 Revision History Date Description Old Version New Version 2007/06/01 Draft created V0.1 2007/06/23 Add “Get Slot ID” and “Switch to TP Mode” Function V0.2
ASUSTeK Strictly Confidential 2 Contents 1 Introduction ................................................................................................................................. 3 2 Set Slot ID ................................................................................................................................... 3 3 Switch to TP Mode.................................................................................錯誤錯誤錯誤錯誤! 尚未定義書籤尚未定義書籤尚未定義書籤尚未定義書籤。。。。 4 Operating Method ....................................................................................................................... 4
ASUSTeK Strictly Confidential 3 1 Introduction This document describes the operating method by using E-Tool for EMP U360. 2 Set Slot ID Step 1 The E-Tool V1.0 dialog box will show when you execute P_E_tool.exe. Step 2 Choose Function->Slot ID, and click it to Set Slot ID automatically. Step 3 It will show the following dialog , click “確定” to continue.
ASUSTeK Strictly Confidential 4 Step 4 It will show the following dialog, turn on inactive DUT ,then click “Abort” to continue. Step 5 If it shows the following dialog , click“確定” and please repeat Step2 through to Step4 . Step 6 If the following dialog appeared , it represents Set Slot ID successfully. 4 Operating Method GSM PART Step 1 The E-Tool V1.0 dialog box will show when you execute P_E_tool.exe.
ASUSTeK Strictly Confidential 5 Step 2 Choose Function->U360->GSM, and click GSM to show GSM_U360_form dialog box. Step 3 Choice com port number to communicate with Mustang.
ASUSTeK Strictly Confidential 6 Step 4 Choice which tp command to send Set GSM Static TX Set GSM Switched TX
ASUSTeK Strictly Confidential 7 Set GSM Static RX Set GSM Switched RX
ASUSTeK Strictly Confidential 8 Reset the GSM Radio Result is showed as below
ASUSTeK Strictly Confidential 9 WCDMA PART Step 1 The E-Tool V1.0 dialog box will show when you execute P_E_tool.exe. Step 2 Choose Finction->U360->WCDMA, and click WCDMA to show WCDMA_U360_form dialog box.
ASUSTeK Strictly Confidential 10Step 3 Choice com port umber to communicate with Mustang.
ASUSTeK Strictly Confidential 11 Step 4 Choice Band MODE to send the tp command Set WCDMA TX
ASUSTeK Strictly Confidential 12Set WCDMA RX
ASUSTeK Strictly Confidential 13POWER Sense ADC Read Result is showed as below
ASUSTeK Strictly Confidential 14
ASUSTeK Strictly Confidential 15Step 5 Reset WCDMA Radio Compliance with FCC rules and regulation: *The maximum antenna gain allowed for use with this device is 0 dBi.
ASUSTeK Strictly Confidential 16*When the module is installed in the host device, the FCC ID label must be visible through a window on the final device or it must be visible when an access panel, door or cover is easily removed. If not, a second label must be placed on the outside of the final device that contains the following text: “Contains FCC ID: MSQT 200”. *RF Exposure Warning:In order to comply with FCC RF Exposure requirements, this device must be installed such that a minimum 20 cm separation distance is maintained between the EUT's antenna(s) and all personsduring normal operation. In addition, the antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter. OEM integrators may not provide instructionsto end-users pertaining to installation or removal of the EUT.

Navigation menu