ASUSTeK Computer T200 3.5G Modular Transmitter User Manual Updated Manual

Download:
Mirror Download [FCC.gov]
Document ID	918592
Application ID	JKownmnRtMFFyICVMFaauQ==
Document Description	Updated Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	60.54kB (756728 bits)
Date Submitted	2008-03-25 00:00:00
Date Available	2008-03-26 00:00:00
Creation Date	2008-03-20 11:41:25
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2008-03-25 15:23:38
Document Title	Microsoft Word - E-Tool for EMP U360 Operating Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	DaKang_Wong

Classification
Doc Number
Date
Version
Confidential
June 23, 2007
Draft v0.2
E-Tool for EMP U360 Operating Manual
ASUSTeK Computer Inc.
Mobile Communication Business Unit
R&D Div.1
Writer：Kevin Hsu & Jim
Reviser：Aden Chang
E-Tool for EMP U360
Revision History
Date
Description
Old Version
New Version
2007/06/01
Draft created
V0.1
2007/06/23
Add “Get Slot ID” and “Switch to TP Mode”
V0.2
Function
ASUSTeK Strictly Confidential
E-Tool for EMP U360
Contents
1 Introduction ................................................................................................................................. 3
2 Set Slot ID ................................................................................................................................... 3
3 Switch to TP Mode.................................................................................錯誤
錯誤! 尚未定義書籤。
尚未定義書籤。
錯誤
4 Operating Method ....................................................................................................................... 4
ASUSTeK Strictly Confidential
E-Tool for EMP U360
1 Introduction
This document describes the operating method by using E-Tool for EMP U360.
2 Set Slot ID
Step 1
The E-Tool V1.0 dialog box will show when you execute P_E_tool.exe.
Step 2
Choose Function->Slot ID, and click it to Set Slot ID automatically.
Step 3
It will show the following dialog , click “確定” to continue.
ASUSTeK Strictly Confidential
E-Tool for EMP U360
Step 4
It will show the following dialog, turn on inactive DUT ,then click “Abort” to continue.
Step 5
If it shows the following dialog , click“確定” and please repeat Step2 through to Step4 .
Step 6
If the following dialog appeared , it represents Set Slot ID successfully.
4 Operating Method
GSM PART
Step 1
The E-Tool V1.0 dialog box will show when you execute P_E_tool.exe.
ASUSTeK Strictly Confidential
E-Tool for EMP U360
Step 2
Choose Function->U360->GSM, and click GSM to show GSM_U360_form dialog box.
Step 3
Choice com port number to communicate with Mustang.
ASUSTeK Strictly Confidential
E-Tool for EMP U360
Step 4
Choice which tp command to send
Set GSM Static TX
Set GSM Switched TX
ASUSTeK Strictly Confidential
E-Tool for EMP U360
Set GSM Static RX
Set GSM Switched RX
ASUSTeK Strictly Confidential
E-Tool for EMP U360
Reset the GSM Radio
Result is showed as below
ASUSTeK Strictly Confidential
E-Tool for EMP U360
WCDMA PART
Step 1
The E-Tool V1.0 dialog box will show when you execute P_E_tool.exe.
Step 2
Choose Finction->U360->WCDMA, and click WCDMA to show WCDMA_U360_form
dialog box.
ASUSTeK Strictly Confidential
E-Tool for EMP U360
Step 3
Choice com port umber to communicate with Mustang.
10
ASUSTeK Strictly Confidential
E-Tool for EMP U360
Step 4
Choice Band MODE to send the tp command
Set WCDMA TX
11
ASUSTeK Strictly Confidential
E-Tool for EMP U360
Set WCDMA RX
12
ASUSTeK Strictly Confidential
E-Tool for EMP U360
POWER Sense ADC Read
Result is showed as below
13
ASUSTeK Strictly Confidential
E-Tool for EMP U360
14
ASUSTeK Strictly Confidential
E-Tool for EMP U360
Step 5
Reset WCDMA Radio
Compliance with FCC rules and regulation:
*The maximum antenna gain allowed for use with this device is 0 dBi.
15
ASUSTeK Strictly Confidential
E-Tool for EMP U360
*When the module is installed in the host device, the FCC ID label must be visible through a
window on the final device or it must be visible when an access panel, door or cover is easily
removed. If not, a second label must be placed on the outside of the final device that contains the
following text: “Contains FCC ID: MSQT 200”.
*RF Exposure Warning:
In order to comply with FCC RF Exposure requirements, this device must be installed such that
a minimum 20 cm separation distance is maintained between the EUT's antenna(s) and all persons
during normal operation. In addition, the antenna(s) must not be co-located or operated in
conjunction with any other antenna or transmitter. OEM integrators may not provide instructions
to end-users pertaining to installation or removal of the EUT.
16
ASUSTeK Strictly Confidential

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2008:03:20 11:41:25Z
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:03:25 15:23:38+08:00
Metadata Date                   : 2008:03:25 15:23:38+08:00
Format                          : application/pdf
Creator                         : DaKang_Wong
Title                           : Microsoft Word - E-Tool for EMP U360 Operating Manual.doc
Producer                        : GPL Ghostscript 8.15
Document ID                     : uuid:4113a8da-bf39-488e-96e0-c2cbeb681c84
Instance ID                     : uuid:b9731256-fcfc-468c-a763-803a914c6ef1
Page Count                      : 17
Author                          : DaKang_Wong

EXIF Metadata provided by EXIF.tools