ASUSTeK Computer WL600G ALL-IN1 WIRELESS ADSL2/2+ HOME GATEWAY User Manual A5468060352
ASUSTeK Computer Inc ALL-IN1 WIRELESS ADSL2/2+ HOME GATEWAY A5468060352
USERS MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 692646 |
| Application ID | +IDpTeFM/6BP7dWVpsrTbA== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 115.98kB (1449693 bits) |
| Date Submitted | 2006-08-11 00:00:00 |
| Date Available | 2006-09-25 00:00:00 |
| Creation Date | 2006-08-04 00:50:27 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2006-08-10 16:56:24 |
| Document Title | A5468060352.pdf |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | emma |
ÂŽ All-in-1 Wireless ADSL2/2+ Home Gateway WL-600g User Manual E2458 / June 2006 Manufacturer Contact Information $6867H.&20387(5,1& $VLD3DFLĂF Company address: 15 Li-Te Road, Beitou, Taipei 11259 General (tel): +886-2-2894-3447 Web site address: www.asus.com.tw General (fax): +886-2-2894-7798 General email: info@asus.com.tw $686&20387(5,17(51$7,21$/ $PHULFD Company address: 44370 Nobel Drive, Fremont, CA 94538, USA General (fax): +1-510-608-4555 Web site address: usa.asus.com Technical support General support: +1-502-995-0883 Support (fax): +1-502-933-8713 Online support: http://vip.asus.com/eservice/techserv.aspx $686&20387(5*PE+ *HUPDQ\ $XVWULD Company address: Harkort Str. 25, D-40880 Ratingen, Germany General (tel): +49-2102-95990 Web site address: www.asus.com.de General (fax): +49-2102-959911 Online contact: www.asus.com.de/sales Technical support Components: +49-2102-95990 Online support: www.asus.com.de/support Notebook: +49-2102-959910 Support (fax): +49-2102-959911 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Table of contents Package contents...........................................................................3 Setup Process Overview ...............................................................4 Hardware overview.........................................................................5 Front panel....................................................................................... 5 Rear panel ....................................................................................... 6 Product features............................................................................... 6 Hardware connections ..................................................................... 7 Connecting to the Internet.............................................................8 Before you start................................................................................ 8 Preparing your WAN ........................................................................ 8 Preparing your LAN ......................................................................... 8 /RJLQWRWKH:HEFRQĂJXUDWLRQLQWHUIDFH ......................................... 9 Quick setup .................................................................................... 10 Manual Setup................................................................................. 12 EZSetup ......................................................................................... 16 Connecting WL-600g with ASUS WLAN Card ............................... 20 Wireless settings ..........................................................................22 Setting up SSID ............................................................................. 22 Setting up wireless security ........................................................... 22 0$&ĂOWHU ....................................................................................... 27 Wireless bridge .............................................................................. 27 Wireless advanced settings ........................................................... 31 Network security...........................................................................32 Setting up access right to WL-600g ............................................... 32 Setting up port triggering................................................................ 33 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Setting up virtual server ................................................................. 34 Setting up DMZ host ...................................................................... 35 Allowing SIP request through NAT................................................. 35 )LUHZDOO2XWJRLQJ,3ĂOWHU............................................................. 35 )LUHZDOO,QFRPLQJ,3ĂOWHU.............................................................. 36 Access time restriction ................................................................... 37 Advanced settings........................................................................38 WAN............................................................................................... 38 LAN ............................................................................................... 38 Setting up DNS server ................................................................... 39 Setting up dynamic DNS ............................................................... 39 Setting up default gateway............................................................. 42 Setting up static route .................................................................... 42 Setting up routing protocol - RIP.................................................... 43 USB applications ..........................................................................44 FTP server function........................................................................ 44 Sharing USB printer ....................................................................... 46 Game Blaster ................................................................................49 Gaming Blaster on WL-600g ......................................................... 49 Setting up priorities for IP phone & other A/V apps........................ 49 Management..................................................................................50 &RQĂJXUDWLRQEDFNXS ..................................................................... 50 5HVWRUHVHWWLQJVIURPDEDFNXSĂOH................................................ 50 Reset to factory default .................................................................. 51 Setting up time server .................................................................... 51 Firmware update ............................................................................ 51 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Package contents ⢠WL-600g Wireless ADSL2/2+ Home Gateway ⢠AC power adapter (type varies by region) ⢠Category 5 (Cat. 5) Ethernet cable ⢠Telephone cable ⢠Splitter (type varies by region) ⢠Support CD (with electronic user manual included) ⢠Quick Start Guide WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Setup Process Overview Hardware setup Refer to the hardware diagram on page 7. Check OK. Login to 192.168.1.1 to FRQĂJXUH\RXU:/J Quick Setup ADSL connection Connection not auto-detection detected OR connection type shown is not correct. Connection detected and connection type is correct. $'6/VHWXSĂQLVKHG Quick SetupWireless setup Change wireless settings. Quick SetupSummary page Check OK Quick Setup ĂQLVKHG WL-600g is ready to use. Check not OK. Manual setup Change ADSL settings. WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Hardware overview Front panel The WL-600g Wireless ADSL2/2+ Home Gateway front panel contains LED indicators which shows the status of WL-600g. PWR ADSL IP USB AIR LAN Label Activity Description PWR (Power) ON Power ON OFF No power Blink Restoring to factory default ON (Green) ADSL link up Blink (Green) ADSL training ON (Red) ADSL link down OFF ADSL is down ON (Green) ADSL is up and the link is PPP ON (Red) ADSL is up, but the link is not PPP OFF ADSL is down ON USB device detected OFF No USB device detected ON Wireless LAN ready Blink Transmiting or receiving data through wireless OFF No power or wireless LAN not ready ON Physically connected to an Ethernet device Blink Transmitting or receiving data through Ethernet cable OFF No power or no physical connection ADSL IP USB 2.0 AIR LAN 1-4 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Rear panel ADSL PWR LAN USB 2.0 Antenna Power switch EZSetup Reset Viewed from left to right, the rear panel of WL-600g contains the following elements: ⢠ADSL port ⢠Power connector ⢠Power switch ⢠Four Local Area Network (LAN) ports ⢠USB 2.0 ports ⢠EZSetup button ⢠Reset button ⢠SMA antenna connector Product features The WL-600g Wireless ADSL 2/ 2+ Home Gateway provides the following features: ⢠Built-in ADSL modem ⢠Built-in firewall ⢠IEEE802.11g standard-based wireless network, backward compatible with 802.11b devices ⢠Easy-to-use Web-based configuration interface: Quick Setup for ADSL connection, wireless, and security configuration ⢠Extensive routing protocol support: RIP v1, v2 ⢠Content-based filter ⢠EZSetup⢠utility for ADSL connection, wireless network and security quick setup WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Hardware connections ADSL connection Use the ADSL splitter supplied in the package to split ADSL signal and telephone service. First connect the splitter to the wall telephone outlet either by just plugging your splitter onto the outlet or by inserting the line connector into the outlet. Then connect your ASUS WL-600g to the ADSL or mode port of the splitter with the telephone cable supplied in the package. Use another telephone cable to connect your telephone to the phone port of the ADSL splitter. The format of the connector on the supplied splitter (line or plug) may differ by region. Ethernet connection Use Category 5 (CAT5) Ethernet cable to build up your wired LAN connections. The ASUS WL-600g Wireless ADSL2/ 2+ Home Gateway is a Fast Ethernet device that provides 100Mbps network connection. To ensure the connection quality, use CAT5 Ethernet cable to connect your network devices, such as desktop computers and network printers. Splitter *: The name or the location of the ports on the supplied splitter may vary by region. Wireless connection To access Internet via wireless connection, you need to install an IEEE802.11b/g wireless adapter on your computer, such as ASUS WL-167g, WL-100gE, WL-100gD, WL-169gE, and WL-106gM. WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Connecting to the Internet Before you start Before you start, you need to: ⢠make sure the cable connections are correct and WL-600g is powered ON; ⢠acquire an active Internet service, such as an ADSL account. :HUHFRPPHQGXVLQJZLUHGFRQQHFWLRQIRULQLWLDOFRQĂJXUDWLRQZKLFKPD\ help avoid possible setup problems due to wireless uncertainty. Use a CAT5 cable to connect an Ethernet-enabled computer to a LAN port of WL-600g. Preparing your WAN Depending on your ISP's requirements, you may need to acquire some of the information listed below to set up Internet connection on WL-600g. ⢠⢠⢠⢠⢠⢠⢠Vitual Path Identifier (VPI) Virtual Channel Identifier (VCI) Host name Domain name ISP login user name and password ISP Domain Name System (DNS) server address Static IP address (For static IP users) Preparing your LAN To use the WL-600g Wireless ADSL2/2+ Home Gateway on your network, you need to install a network interface card (NIC) or an IEEE802.11b/g wireless network card to your computer. /$1FRQĂJXUDWLRQUHTXLUHPHQW )RULQLWLDOFRQĂJXUDWLRQZHUHFRPPHQG\RXWRFRQQHFWDFRPSXWHUWRRQHRIWKH/$1 SRUW RI :/J DQG FRQĂJXUH WKH7&3,3 VHWWLQJV RI \RXU FRPSXWHU7KH GHIDXOW ,3 settings of WL-600g are: IP address: 192.168.1.1 Subnet mask: 255.255.255.0 DHCP server: enabled To access WL-600g, you must set your computer in the same subnet with the ADSL router. You can make the computer accept a dynamic IP address assigned by the DHCP server of WL-600g, or manually set up IP address for your computer. WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Getting dynamic IP address Open Control Panel -> Local Area Network Connection, double-click Local Connection icon, then double-click ,QWHUQHW3URWRFRO 7&3,3 Select Obtain an IP address automatically and Obtain DNS server address automatically, then click OK. Assigning IP address manually Open Control Panel -> Local Area Network Connection, double-click Local Connection icon, then double-click Internet Protocol (TCP/ ,3 . Follow the descriptions below to setup the TCP/IP on your computer. ⢠IP address: 192.168.1.xxx (xxx can be any number between 2 and 254, make sure the IP address is not used by other device) ⢠Subnet Mask: 255.255.255.0 ⢠Gateway: 192.168.1.1 ⢠DNS: 192.168.1.1 /RJLQWRWKH:HEFRQĂJXUDWLRQLQWHUIDFH 7RFKDQJHWKH$'6/DQGZLUHOHVVVHWWLQJV\RXQHHGWRORJLQWRWKH:HEFRQĂJXUDWLRQ interface. 1. Type 192.168.1.1 (default IP address of WL-600g) into the address box of the Web browser and press Enter. 2. A login window appears. The default username is admin, password is admin (in lower case). 3. When logged in, you can see the home page of WL-600g Web configuration interface. To setup the router, refer to Quick Setup in the next section. To setup the advanced functions, refer to the following chapters for detailed information. WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Quick setup /RJLQWRWKH:/JFRQĂJXUDWLRQSDJH 1. Input 192.168.1.1 into the address box of your Web browser and press Enter. 2. A login window appears for user name and password. The default username is admin, password is admin (in lower case). $IWHUORJJLQJLQ\RXFDQVHHWKH:/JFRQĂJXUDWLRQSDJH ADSL setup :LWK4XLFNVHWXS\RXQHHGWRVHWXSWKH$'6/OLQNĂUVWWKHQWKHZLUHOHVVVHWXS 1. By default, the Quick Setup page pops up. The Quick Setup Wizard automatically detects your ADSL connection type. 2. If ADSL connection is detected, the next page shows your ISP connection type (PPPoE, PPPoA or MER). If your ADSL connection is not detected, click Manual Setting to manually set up WL-600g. Refer to Page 11-13 for manual setting instructions. -- If it shows your connection type is PPPoE or PPPoA For dynamic IP users, input your user name and password then click Next. For static IP users, check Use Static IP Address, input your IP address, then click Next. Click Next to save the ADSL information to WL-600g. If your actual connection is not PPPoE or PPPoA, click Manual Setting to manually set up WL-600g. Refer to Page 11-13 for manual setting instructions. 10 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual ,ILWVKRZV\RXUFRQQHFWLRQW\SHLV0(5 '+&3 Click Next if your connection type is MER (DHCP). If your actual connection is not MER(DHCP), click Manual Setting to manually set up WL-600g. Refer to Page 11-13 for manual setting instructions. Wireless setup 1. Choose a Security Level. For detailed security information, refer to Page 21-22. 2. Input a key in the KeyĂHOG7KHQXPEHURIGLJLWIRUWKHNH\GHSHQGVRQWKHVHFXULW\ level you choose. 3. The summary page then shows up. If the information displayed is correct, click Save/RebootWRĂQLVKWKHVHWXS2WKHUZLVHFOLFNBack to modify the settings. 4. Setup complete! Wait for about 60 seconds to reboot. The Web page will refresh to show device information after reboot. 11 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Manual Setup ,I\RXHQFRXQWHUDQ\GLIĂFXOW\FRQĂJXULQJ\RXU$'6/FRQQHFWLRQZLWK4XLFN6HWXSFOLFN Manual Setting to manually set up your WL-600g. ADSL Setup 1. Select your Country and ISP and click Next. 2. If your country and ISP are not on the list, select Not list, key in your VPI and VCI values and click Next. You may ask your ISP for VPI/VCI values. 12 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual 3. Select your connection type and click Next. You can get the connection type from your ISP. -- If your connection type is PPPoA or PPPoE For dynamic IP users, input your PPP user name, password, and service name then click Next. For static IP users, check Use Static IP Address then key in your IP address, then click Next. 13 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual -- If your connection type is MER For dynamic IP users, check Obtain an IP address automatically, Obtain default gateway automatically, and Obtain DNS server address automatically, then click Next. For static IP users, check Use the following IP Address, Use the following default gateway, and Use the following DNS server address, then input the DGGUHVVHVLQFRUUHVSRQGHQWĂHOGV -- If your connection type is IPoA Static IP user only. Input the WAN IP address assigned by your ISP, then click Next. 14 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Wireless Setup 1. Designate an SSID (network name) for WL-600g. Choose the security level then input a key. The number of digit of your key depends on the security level you FKRRVH5HIHUWRWKHQRWHRQWKHZHESDJH:KHQĂQLVKHGFOLFNNext. 7KLVSDJHSURYLGHVDVXPPDU\RI:/J:$1DQGZLUHOVVFRQĂJXUDWLRQ&OLFN Save/Reboot WRVDYHDQGDFWLYDWH\RXUFRQĂJXUDWLRQ 3. Setup complete! WL-600g reboots in about 50 seconds. The green bar shows the current rebooting status. After reboot, the web page will automatically refresh to display the settings. 15 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual EZSetup ASUS WL-600g Wireless ADSL2/2+ Home Gateway provides an easy-to-use setup utility -- EZSetup. With this utility, you can wirelessly setup your Internet connection, wireless LAN with just several clicks. Installing ASUS utility 7RXVH$686(=6HWXSIRU:/JFRQĂJXUDWLRQ\RXPXVWLQVWDOOWKH$686XWLOLWLHV from the support CD included in your package. Insert the CD into your optical drive and autorun the installation program. If autorun is disabled on your computer, double-click SETUP.EXE in the root directory of the CD. Setup WL-600g using EZSetup 1. Before using this utility, make sure that your hardware connections are all set. Click Start -> Program -> ASUS Utility -> WL-600g Wireless Router -> EZSetup Wizard to start EZSetup. Click Next. 2. Click EZSetup. 16 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual 3. Push the red EZSetup button on the rear panel of WL-600g for over 3 seconds until the PWR LED is blinking. EZSetup 4. Click EZSetup button. 5. The system generates the SSID and Network key automatically. The network key is a 128-bit WEP key by default. You can accept the settings, or assign SSID and keys to your own need. Click Next to save the wireless settings. 17 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual 6. Next, EZSetup will guide you to complete the Internet connection settings. Check &RQĂJXUH,63VHWWLQJV then click Next to continue. 7. The system detects your Internet connection type. The progress may take several seconds. If your ADSL connection is successfully detected by WL-600g, skip to Step 8. If your ADSL connection can not be detected, you need follow Step 8 and manually set up your ADSL connection. 8. Select your country and ISP then click Next. 18 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual If your country or ISP are not on the list, select Not listed for both country and ,63ĂHOGV7KHQVHOHFWConnection typeDQGĂOOLQ93,DQG9&,All Programs -> ASUS Utility-> WLAN Card -> One Touch Wizard to launch the One Touch Wizard utility. 20 1. Select Connect to an existing wireless /$1 6WDWLRQ radio button and click Next to continue. 2. One Touch Wizard searches and displays the available APs in the Available Networks list. Select WL-600g and press Next to continue. 3. Set the authentication and encryption of your WLAN card the same with those at WL-600g. Click Next to continue. 4. It takes several seconds for the wireless card to associate with WL-600g. Press Next to setup TCP/IP. WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual 5. Setup the IP address of the WLAN Card according to your network condition. After the setup is completed, click Finish to exit the One Touch Wizard. &RQĂJXULQJ:/$1FDUGZLWK:LQGRZVÂŽ WZC service You can also use WindowsÂŽ:LUHOHVV=HUR&RQĂJXUDWLRQVHUYLFHWRVHWXSWKHZLUHOHVV connection with WL-600g. 1. Double-click the wireless network icon on the task bar to view available networks. Select your wireless router and click Connect. 2. Input the key you have set on the WL-600g and click Connect. The connection is completed within several seconds. 21 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Wireless settings 7KLVFKDSWHUGHVFULEHVKRZWRFRQĂJXUHWKHZLUHOHVVIHDWXUHVRI\RXU$686:/J ADSL Wireless Router. Setting up SSID 66,'VWDQGVIRU6HUYLFH6HW,GHQWLĂHUDOVRNQRZQDVWKHQDPHRIDZLUHOHVVQHWZRUN To connect a wireless router, or to form a wireless bridge system, all wireless routers or APs or clients must have the same SSID.To setup SSID: 1. Click Wireless -> BasicLQWKHOHIWVLGHPHQXWRRSHQWKHFRQĂJXUDWLRQSDJH 2. Select Enable Wireless checkbox. 3. You can hide WL-600g from wireless scanning by selecting Hide Access Point, but wireless clients still can connect to WL-600g by specifying correct SSID. 'HĂQHWKH66,'IRU:/J7KHGHIDXOW66,'LVDefault. 5. Press Save/Apply to save and activate the settings. Setting up wireless security To protect your wireless network, you need to setup a security mechanism at both WL-600g and the wireless clients. Network authentication Network authentication uses certain types of mechanism to identify authenticated wireless clients. WL-600g supports the following authentication methods: 22 Open: This option disables authentication protection for your wireless network. Under the Open mode, any IEEE802.11b/g wireless client can connect to your wireless network. Shared: Shared means using the same WEP keys for authentication and encryption. 802.1X: 802.1X uses RADIUS (Remote Access Dial-Up User Service) server to authenticate wireless clients with a username and password. It can authenticate user with different levels of access right. WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual WPA: WPA stands for WiFi-Protected Access. WPA provides two security modes for Home/SOHO user and enterprise network. The former solution adopts Pre-Shared Key for authentication, and the latter uses the existing 802.1X RADIUS server in the enterprise network to process the authentication requests. WPA - PSK: WPA-PSK (Pre-Shared Key) is the solution for home and SOHO users who have no 802.11X authentication server within the LAN. To setup WPA-PSK, you need to input a passphrase and let the system generate the key. Combination of letters, numbers and non-alphanumeric characters is recommended for ensuring security. Encryption Encryption is used to convert plain text data into unreadable codes with certain type of algorithm before capsulation for wireless transmission. WL-600g supports the following encryption methods: WEP: WEP stands for Wired Equivalent Privacy. It uses 64 or 128-bit static keys. You can let the system generate the WEP keys by inputting a Passphrase. TKIP: Temporal Key Integrity Protocol (TKIP) dynamically generates unique keys to encypt every data packet in a wireless session. AES: Advanced Encryption Standard (AES) is a dependable encryption adopted in WPA2 or IEEE802.11i standard. It offers stronger protection and greatly increases the complexity of wireless encryption. TKIP + AES: For a network where WPA clients (using TKIP encryption) and WPA2 clients (using AES encryption) co-exist. Select this option to enable both. How to setup wireless security Open 1. Click Wireless -> SecurityLQWKHOHIWVLGHPHQXWRRSHQWKHFRQĂJXUDWLRQSDJH 2. Select Open in the Network AuthenticationĂHOGWRGLVDEOHDXWKHQWLFDWLRQPHFKDQLVP 23 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual 3. Select Enable in the WEP EncryptionĂHOGWRXVH:(3NH\VIRUGDWDHQFU\SWLRQV Select 64-bit or 128-bit Encryption Strength for key length then click Set Encryption Keys button to setup the keys. If you do not want to encrypt data, select Disable in WEP Encryption and skip to Step 5. 4. After you click the Set Encryption Keys button, you are directed to another page to setup the keys. You can select Enable ASUS Passphrase and input a passphrase LQWKHĂUVWER[EHORZWKHV\VWHPDXWRPDWLFDOO\JHQHUDWHVIRXUQHWZRUNNH\VIRU\RX You can also disable ASUS Passphrase and input four keys manually. Record the passphrase (if any) and keys in your note. 5. Press Save/Apply to save and activate the settings. Shared 1. Click Wireless -> SecurityLQWKHOHIWVLGHPHQXWRRSHQWKHFRQĂJXUDWLRQSDJH 2. Select Shared in the Network AuthenticationĂHOGWRXVH:(3DXWKHQWLFDWLRQ 3. The WEP Encryption is fixed to Enabled because Shared mode use the same WEP keys for both encryption and authentication. 4. Select 64-bit or 128-bit Encryption Strength for key length then click Set Encryption Keys button to setup the keys. Refer to Open mode Step 4 for key FRQĂJXUDWLRQ 5. Press Save/Apply to save and activate the settings. 24 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual 802.1X 1. Click Wireless -> SecurityLQWKHOHIWVLGHPHQXWRRSHQWKHFRQĂJXUDWLRQSDJH 2. Select 802.1X in the Network AuthenticationĂHOGWRHQDEOHDXWKHQWLFDWLRQXVLQJ RADIUS server in your network. 3. Input the RADIUS Server IP address, RADIUS port (the default value is 1812), and RADIUS Key. 4. You can choose to enable or disable data encryption. If you want to encrypt data, select Enable in the :(3 (QFU\SWLRQ ĂHOG, select 64-bit or 128-bit Encryption Strength for key length. Click Set Encryption Keys button to setup the keys. 5. Refer to OpenPRGH6WHSIRUNH\FRQĂJXUDWLRQ 6. Press Save/Apply to save and activate the settings. WPA 1. Click Wireless -> SecurityLQWKHOHIWVLGHPHQXWRRSHQWKHFRQĂJXUDWLRQSDJH 2. Select WPA in the Network Authentication field to enable RADIUS server authentication and advanced encryption methods. 25 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual 3. Set the WPA2 Preauthentication to Enabled if you want to use this function. 4. The Network Re-auth Interval is 36000 seconds by default, you can setup this value according to your network environment. 5. Set up RADIUS server inforamtion by inputting WPA Group Rekey Interval, RADIUS server IP address, RADIUS port and RADIUS Key. 6. Set up WPA encryption methods. If there are only WPA2 clients within your network, select AES, if WPA clients only, select TKIP; if both exist, select TKIP+AES. 7. You can also enable WEP client to access your wireless network. To enable WEP clients, set WEP Encryption to Enabled. Select 64-bit or 128-bit Encryption Strength for key length then click Set Encryption Keys button to setup the keys. Refer to OpenPRGH6WHSIRUNH\FRQĂJXUDWLRQ 8. Press Save/Apply to save and activate the settings. WPA-PSK 1. Click Wireless -> SecurityLQWKHOHIWVLGHPHQXWRRSHQWKHFRQĂJXUDWLRQSDJH 2. Select WPA-PSK in the Network AuthenticationĂHOG 3. Input the WPA Pre-Shared Key. The key is masked by the system. To check the key, press Save/Apply and wait until the page refreshes. Then click Click here to display link, you can see the key displayed in a separate window. 4. Setup the WPA Group Rekey Interval. 5. Set up WPA encryption methods. If there are only WPA2 clients within your network, select AES, if WPA clients only, select TKIP; if both exist, select TKIP+AES. 6. You can also enable WEP client to access your wireless network. To enable WEP clients, set WEP Encryption to Enabled. Select 64-bit or 128-bit Encryption Strength for key length then click Set Encryption Keys button to setup the keys. Refer to OpenPRGH6WHSIRUNH\FRQĂJXUDWLRQ 7. Press Save/Apply to save and activate the settings. 26 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual 0$&ĂOWHU MAC FilterLQWKHOHIWVLGHPHQXWRRSHQWKHFRQĂJXUDWLRQSDJH 6HOHFWWKHUHVWULFWLRQPRGHIRUWKHĂOWHU VHOHFWAllow to allow the client and deny the rest; select DenyWRGHQ\WKHFOLHQWDQGDOORZWKHUHVW%\GHIDXOWWKHĂOWHULVVHW to Disable which allows all clients. Click AddWRFUHDWHDĂOWHU 2. Type the MAC address of the wireless client you want to allow or block. 3. Press Save/Apply to save and activate the settings. Wireless bridge You can connect WL-600g to other wireless bridges so as to expand your wireless LAN. This function is also referred to as Wireless Distribution System (WDS). To set up WDS, the wireless routers must meet the following requirements: 1. Using the same encryption. 2. Working on the same channel. 3. The IP addresses of all wireless bridges are within the same subnet. 4. WDS enabled. 5. For bridging wireless routers, the MAC Addresses of the uplink wireless router must be saved to the Remote Bridge List. For uplink wireless router, MAC addresses of all bridging router must be saved. Example: WL-600g (wireless bridge with Internet access), WL-500gP (wireless bridge), and WL-500gD (wireless bridge). Refer to the illustration on the next page. WL-600g WL-500gD WL-500gP SSID ASUS ASUS ASUS DHCP server Enabled Disabled Disabled LAN IP address 192.168.1.1 192.168.1.2 192.168.1.3 Authentication Open Open Open Encryption WEP-128bit WEP-128bit WEP-128bit Remote bridge 00:01:00:01:01:02 00:01:00:01:01:01 00:01:00:01:01:01 00:01:00:01:01:03 MAC address 00:01:00:01:01:01 00:01:00:01:01:02 00:01:00:01:01:03 Channel 11 11 11 27 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual :'6VHWXS :/J 1. Setting up encryption If you want to use encryption function, select a Network Authentication mode; if not, select Disabled. Click Wireless -> SecurityWRRSHQWKHFRQĂJXUDWLRQSDJH In this example, set authentication to Open and encryption to Enabled, select 128bit for Encryption Strength, then click Set Encryption Keys. 28 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual You can check Enable ASUS PassPhrase and input a string in PassphraseĂHOGWROHW the system generate the Network Keys. You can also disable Passphrase and input four NH\VPDQXDOO\:KHQĂQLVKHGFOLFN Save/Apply. 2. Setting up channel Click Wireless -> Advanced. Set Channel to 11 and click Save/Apply. 29 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual 3. Setting IP address Click Advanced Setup -> LAN. Set WL-600g IP address to 192.168.1.1, select Enable DHCP Server and set Start IP address to 192.168.1.4. Click Save/ Reboot. 4. Setting WDS Click Wireless -> Wireless Bridge. Select Wireless Bridge. You can select Enabled 6FDQ to find WL-500gD and WL-500gP. If the stations are on the list, check the checkbox and click Save/Apply. ,I\RXFDQQRWĂQG:/J'E\VFDQQLQJVHWBridge Restrict to Enable and input the 0$&DGGUHVVRI:/J'DQG:/J3PDQXDOO\:KHQĂQLVKHGFOLFNSave/Apply. WL-600g WDS setup is complete! 30 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual :'6VHWXS :/J'DQG:/J3 Set up WL-500gD and WL-500gP according to the table on Page 26. 1. Wireless Setting Set WL-500gD, WL-500gP wireless channel, authentication, encryption and keys the same as WL-600g. 2. Set IP address to 192.168.1.2 (WL-500gD), 192.168.1.3 (WL-500gP) 3. Disable DHCP Server and set default gateway to 192.168.1.1, 4. WDS Setting ⢠Open Wireless -> Bridge, set AP Mode to Hybrid. ⢠Set Channel to 11. ⢠Add the MAC address of WL-600g to Remote Bridge List. 5. Save the settings and reboot. Wireless advanced settings Click Wireless -> AdvancedWRFRQĂJXUHDGYDQFHGIHDWXUHVRIWKHZLUHOHVVURXWHUVXFK as communication channel, data rate and WMM. If you do not know the meaning of these items, use the default setting. 31 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Network security This chapter shows how to set up security defence for your local area network. Setting up access right to WL-600g To protect your wired and wireless LAN, we recommend setting up access protection VRDVWRSUHYHQW:/JIURPEHLQJYLHZHGRUPRGLĂHGE\XQDXWKHQWLFDWHGXVHUV Service restriction WL-600g provides a Service Control List (SCL) that can enable or disable services ZKLFKDUHXVHGWRDFFHVVWKHURXWHUFRQĂJXUDWLRQLQWHUIDFH Access Control -> IP Addresses to setup the IP address for the authenticated network supervisors. Before setting up the IP address restriction, make sure addresses of authenticated hosts are static. 32 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Password protection WL-600g ADSL also provides three levels of access right: admin, support, and user. Account "admin" has full access to change and view configuration of the router, "support" is for ISP technician to view and keep maintenance to the router, "user" can view the router settings and statistics, as well as to update the software. 1. Click Management -> Access Control -> Passwords in the left side menu to setup passwords for these accounts. 6HOHFWWKHDFFRXQWXVHUQDPHDQGĂOOLQROGSDVVZRUGDQGQHZSDVVZRUG WZLFH Each passwords contains up to 16 characters or digits. 3. Press Save/Apply to save and activate the settings. Setting up port triggering Some applications such as games, video conferencing, and remote access require VSHFLĂHGSRUWVLQWKHĂUHZDOOWREHRSHQHGIRUUHPRWHDFFHVV NAT -> Port Triggering in the left side menu to open the FRQĂJXUDWLRQSDJH&OLFNAdd to create a new rule. 6HOHFWWKHVHUYLFH\RXZDQWWRFRQĂJXUHDQGOHWWKHV\VWHPDXWRPDWLFDOO\ĂOOLQWKH external and internal port number and protocol type. You can also select Custom Server radio button to designate a certain known server. 3. Fill in trigger port (range) and protocol, open port (range) and protocol for the service if you select Custom Server radio button. 4. Press Save/Apply to save and activate the settings. Setting up virtual server 9LUWXDOVHUYHUDOORZVGLUHFWLQJ:$1LQFRPLQJWUDIĂFWRKRVWVRUVHUYHUVXVLQJSULYDWH,3 addresses within a LAN. With virtual server, the router checks the port number of the packets sent to the WAN interface, translates the port numbers into private IP address, and redirects the packets to the corresponding internal hosts and servers. WL-600g supports up to 32 virtual server entries. To set up virtual server: 1. Click Advanced Setup -> NAT -> Virtual Server in the left side menu to open the FRQĂJXUDWLRQSDJH&OLFNAdd to create a new rule. 6HOHFWWKHVHUYLFH\RXZDQWWRFRQĂJXUHDQGOHWWKHV\VWHPDXWRPDWLFDOO\ĂOOLQWKH external and internal port number and protocol type. You can also select Custom Server radio button to designate a certain known server. 3. Fill in external port (range), internal port (range), and protocol for the service if you select Custom Server radio button. 4. Fill the Server IP Address box with the network address of the host or server within your LAN. 5. Press Save/Apply to save and activate the settings. 34 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Setting up DMZ host The function of DMZ is similar to that of virtual server. The difference between virtual server and DMZ is that DMZ opens all ports to WAN while virtual server opens ports DFFRUGLQJWRWKHGHPDQGRIWKHHQDEOHGVHUYLFHV7RFRQĂJXUH'0=KRVW 1. Click Advanced Setup -> NAT -> DMZ Host in the left side menu to open the FRQĂJXUDWLRQSDJH 2. Enter the IP address of the host to be setup as DMZ host. 3. Press Save/Apply to activate the settings. $OORZLQJ6,3UHTXHVWWKURXJK1$7 NAT checks IP header only and translate the information into private IP address. However, for applications that demand many dynamic ports for session control such as Session Initiation Protocol (SIP), traditional NAT cannot translate the address because lack of preset service ports. To enable such services while at the same time do not sacrifice network security, WL-600g introduces Application Layer Gateway (ALG) to DOORZ6,3UHTXHVWJRLQJWKURXJKĂUHZDUHDQG1$7IURP:$17RFRQĂJXUH$/* 1. Click Advanced Setup -> NAT -> ALG in the left side menu to open the FRQĂJXUDWLRQSDJH 2. Select SIP Enabled checkbox to allow SIP request, or uncheck to disable. 3. Press Save/Apply to save and activate the settings. )LUHZDOO2XWJRLQJ,3ĂOWHU %\GHIDXOWDOORXWERXQG,3WUDIĂFLVDOORZHG Security -> IP Filtering -> Outgoing in the left side PHQXWRRSHQWKHFRQĂJXUDWLRQSDJH&OLFNAdd to create a new rule. 35 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual 'HĂQHDFilter NameIRUWKHĂOWHUUXOH6SHFLI\SURWRFROVRXUFH,3DGGUHVVVXEQHW mask and port (range) and destination IP address, subnet mask and port (range). 3. Press Save/Apply to save and activate the settings. )LUHZDOO,QFRPLQJ,3ĂOWHU %\GHIDXOWDOOLQFRPLQJ,3WUDIĂFLVEORFNHG Security -> IP Filtering -> Incoming in the left side PHQXWRRSHQWKHFRQĂJXUDWLRQSDJH&OLFNAdd to create a new rule. 'HĂQHDFilter NameIRUWKHĂOWHUUXOH6SHFLI\SURWRFROVRXUFH,3DGGUHVVVXEQHW mask and port (range) and destination IP address, submask and port (range). 6HOHFWWKH:$1LQWHUIDFHWKURXJKZKLFKWKHSDFNHWVHQWHUWKHĂUHZDOO 4. Press Save/Apply to save and activate the settings. 36 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Access time restriction This function enables to put time restriction on Internet access by setting up blocking WLPHWDEOH7RFRQĂJXUHWKHDFFHVVWLPHUHVWULFWLRQ 1. Click Advanced Setup -> Security -> Parental Control in the left side menu to RSHQWKHFRQĂJXUDWLRQSDJH&OLFNAdd to create a new rule. 2. Fill in the username to whom you want to apply the restriction. )LOOLQWKH0$&DGGUHVVRIWKHUHVWULFWHGKRVW,I\RXDUHDFFHVVLQJWKLVFRQĂJXUDWLRQ at the computer of restricted host, select Browser's MAC Address radio button. The V\VWHPDXWRPDWLFDOO\GHWHFWVWKH0$&DGGUHVVRIWKHFRQĂJXUDWLRQFRQVROH,I\RX ZDQWWRFRQĂJXUHKRVWVRWKHUWKDQWKHFRQVROHFRPSXWHUHQWHUWKH0$&DGGUHVV manually. To get the MAC address of a host, click Start menu on the desktop of the host, select Run, type cmd into the box and press OK, then type command LSFRQĂJDOODQGSUHVVHQWHU WAN in the left side menu to enter the WAN setup page. This page allows you to edit the WAN settings. LAN 1. Click Advanced Setup -> LAN in the left side menu to enter the Local Area Network /$1 6HWXSpage. This page allows to change the IP address and subnet mask of the router, enables or disables UPnP, IGMP snooping and DHCP server. The default settings are: ⢠IP Address: 192.168.1.1 ⢠Subnet mask: 255.255.255.0 ⢠Enable UPnP: Yes ⢠Enable IGMP Snooping: No ⢠Enable DHCP Server: Yes Start IP Address: 192.168.1.2 End IP Address: 192.168.1.254 Lease Time (hour): 24 '+&3VHUYHULVHQDEOHGE\GHIDXOW DNS -> DNS ServerWRRSHQWKH'16VHUYHUFRQĂJXUDWLRQ page. By default, the DNS server is set to automatically accept the DNS server assigned E\,63,I\RXU,63VSHFLĂHVFHUWDLQ'16VHUYHUDGGUHVVHVXQFKHFNEnable Automatic Assigned DNS checkbox and type the DNS addresses into the Primary DNS server box and Secondary DNS server box (if any). Click Save to save the settings. Setting up dynamic DNS Hosts using dynamic IP addresses can associate with a domain name via Dynamic DNS (DDNS). To use DDNS function, you need to first register at a dynamic DNS service provider, such as DDNS, to get a valid account. ''16DFRXQWUHTXHVWSURFHGXUHV 1. Type www.DynDNS. org to the address box of your Web browser and press Enter. Read the policy and select "I have read...". 2. E n t e r y o u r u s e r name, e-mail address, password, then click Create Account. 39 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual 3. A message prompts out asking you to check your mailbox for the activation letter. Open your mailbox and read the mail. DNS -> Dynamic DNSWRHQWHUWKHFRQĂJXUDWLRQSDJH 3UHVV$GGWRFRQĂJXUH'\QDPLF'16 2. Choose your DDNS provider and fill in the hostname. The supported DDNS provider are DynDNS.org and TZO. DynDNS.org settings require username and password of your DDNS account. TZO requires registered Email address and Key. 3. Press Save/Apply to save and activate the settings. 4. To verify whether DDNS is working, click Start menu and select Run....Type cmd and click OK to open the CLI console. 5. Type ping account.dyndns.org (your DDNS domain name). If you can see the reply like what is shown in the picture, DDNS is working correctly. 41 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Setting up default gateway This section allows to manually setup default gateway of Internet connection. 1. Click Advanced Setup -> Routing -> Default GatewayWRRSHQWKHFRQĂJXUDWLRQSDJH 2. By default, automatic assigned default gateway is enabled, that is, the router accepts the first received gateway assignment from ISP. If your ISP specifies a gateway, uncheck Enable Automatic Assigned Default Gateway and enter the gateway address. 3. Press Save/Apply to save and activate the settings. Setting up static route For simple networks that have only one router, you do not need to set up static route. For more complicated network such as an enterprise network where several routers and GLIIHUHQWVXEQHWVH[LVW\RXQHHGWRFRQĂJXUHVWDWLFURXWHVVRDVWRGLUHFWWKHQHWZRUN WUDIĂFFRUUHFWO\ 1. Click Advanced Setup -> Routing -> Static Route WRRSHQWKHFRQĂJXUDWLRQSDJH and view the current static route settings. Press Add to create a new static route. 7KHFRQĂJXUDEOHVHWWLQJVLQFOXGH ⢠Destination Network: input the IP address of destination; ⢠Subnet Mask: input the subnet mask of destination; ⢠Use Gateway IP Address: input the gateway network address (optional); ⢠User Interface: select the interface of your router to which the static route applies. 3. Press Save/Apply to save and activate the settings. 42 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Setting up routing protocol - RIP RIP stands for Rounting Information Protocol. WL-600g supports RIPv1 and RIPv2. 1. Click Advanced Setup -> Routing -> RIPWRRSHQWKHFRQĂJXUDWLRQSDJH 2. To activate RIP, select Enabled radio button for global RIP mode. 7RFRQĂJXUHDQLQGLYLGXDOLQWHUIDFHVHOHFWWKHGHVLUHG5,3YHUVLRQDQGRSHUDWLRQ and check the Enabled checkbox for the interface. 4. Press Save/Apply to save and activate the settings. 43 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual USB applications WL-600g offers two USB2.0 ports for setting up FTP server and sharing USB printer. FTP server function Before setup, you need to prepare a USB disk for FTP storage. If the format of your external hard disk is NTFS, the FTP server can only be UHDGDEOH8SORDGLQJĂOHVRQWKH)73VHUYHULVQRWDOORZHG%HVLGHVRQO\ Anonymous User can login. Super User can not login under NTFS FTP server. Setting up FTP server To setup FTP server: 1. Plug your USB storage into the USB2.0 port on the WL-600g rear panel. Then click USB Application -> FTP ServerLQWKHOHIWVLGHPHQXWRRSHQWKHFRQĂJXUDWLRQSDJH 2. Set Enable FTP Server to Yes. 3. Allow Anonymous User to Login: If you want to allow anonymous user to access your FTP site, select Yes; if you want to protect your data from unauthenticated user, select No. 4. Allow Super User to Login: Select Yes to allow super user to access the FTP server. 5. FTP Port: Set up the port number of the FTP server. For example, if the port number is set to 1111, you can access the FTP server by typing ftp://192.168.1.1:1111 into the address box of your Web browser (192.168.1.1 is the default IP address of WL-600g). 6. Maximum User Allowed to Login: set up the maximum login user according to your working environment. 7. Login Timeout in Seconds: When login times out, the login trail is terminated. 8. Stay Timeout in Seconds: Timeout value for inactive connection. 9. Press Save/Apply to save and activate the settings. 44 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual If you use web access for Super User Login (as the red circle marks), please set Maximum Users Allowed to Log in to more than 1 or the message "server is busy" will pop up. Setting up FTP account You can set up 12 accounts for your FTP site. 1. Click USB Application -> FTP Server -> User List in the left side menu to open the FRQĂJXUDWLRQSDJH&OLFNAdd to create new FTP account. 'HĂQHWKHUsername, Password for the new account. Setup the Max. Login to UHVWULFWWKHDFFHVVUHTXHVW'HĂQHWKHDFFHVVULJKWWRWKHDFFRXQW 3. Click Apply to save the new account. 4. Click Save to save and activate the settings. Setting up FTP security You can deny access request from certain IP address by setting up Banned IP List. 1. Click USB Application -> FTP Server -> Banned IP List in the left side menu to RSHQWKHFRQĂJXUDWLRQSDJH&OLFNAdd to create a new rule. 2. Input the IP address of the banned host and click Apply to save the banned IP. Make sure the banned IP is static. 3. Click Save to save and activate the settings. Your FTP site is ready. Type IWS SRUWQXPEHU into the address box of your Web browser and press Enter. When prompted for login, input the username and password you have set up for FTP account and login. 45 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Sharing USB printer You can plug your USB printer to the USB2.0 port of WL-600g to share it within your LAN. After you plug a printer to the USB port, you can see the status of printer by clicking USB Application -> Printer Status. Setting up printer client under Windows XP Follow the steps below to install network printer on your clients. 46 1. Run Add Printer Wizard from Start -> Printers and Faxes -> Add a printer. 2. Select Local printer attached to this computer and click Next. 3. Select Create a new port and set Type of port to Standard TCP/IP Port, then click Next. 4. Click Next to setup TCP/IP port for accessing the network printer. WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual 5. Input the IP address of WL-600g in the Printer Name of IP Address ĂHOGDQGFOLFNNext. 6. Select Custom and click Settings. 7. Set Protocol to LPR and type LPRServer in Queue Name field. Click Next to continue. 8. Press NextWRĂQLVKVWDQGDUG7&3 IP port setting. 9. Press Finish to complete the settings and return to Add Printer Wizard. 10. Install printer driver from the vendormodel list. If your printer is not in the list, click Have Disk to manually assign the location of driver. 47 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual 11. Click Next to accept the default name for the printer. 12. Select Yes to print a test page. Click Next to print. 13. The installation is complete. Click Finish to quit the Add Printer Wizard. If you have already installed the printer locally on your computer, right click the printer icon and select Property -> Port tab to add a standard TCP/IP port. Click Add Port then select Standard TCP/IP Port and click New Port button. Refer to Step 5-8 for setting procedures. If you use WindowsÂŽ 98 or ME which does not support Standard TCP/IP port, you need to use Remote Port which is supported by WL-600g. 48 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Gaming Blaster $686 :/J¡V ´*DPLQJ %ODVWHUÂľ LV GHVLJQHG WR HQKDQFH \RXU RQOLQH JDPLQJ experience. This technology provides the uninterrupted and latency-free gaming experience that online gamers expect. It intelligently optimizes network resources and automatically prioritizes network traffic to better execute time-sensitive applications including IP phone and multimedia applications. âGaming Blasterâ on WL-600g By default:/JLVVHWRQ´*DPLQJ%ODVWHUÂľPRGHDQG\RXFDQWKHQH[SHULHQFHWKH enhanced gaming power. Just click on the Gaming Blaster icon and you can enable or disable this function on WL-600g. From the bar chart at the bottom of the web page, you can see that the gaming application, by default, takes most of the WL-600g's network resource. 8VHU6SHFLĂHG6HUYLFH Setting up online gaming priority by indicating ports and IP addresses. SettingsWRRSHQWKHFRQĂJXUDWLRQSDJHDQGFOLFNWKHBackup Settings button. Click SaveDQGGHĂQHWKHGHVWLQDWLRQIROGHU7KHGHIDXOWQDPHIRU EDFNXSĂOHLVbackupsettings.conf. 5HVWRUHVHWWLQJVIURPDEDFNXSĂOH Settings -> UpdateWRRSHQWKHFRQĂJXUDWLRQ page. Click Browse WRORFDWHWKHEDFNXSĂOHRQ\RXUFRPSXWHUWKHQFOLFNUpdate Settings button to proceed. When the restoring process is completed, the wireless router reboots. The whole process takes about 80 seconds. 50 WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual Reset to factory default To clear all settings and return to the factory default settings, you can press the Reset button on the rear panel of the wireless router for 10 seconds; or click Management -> Settings -> Restore Default WRRSHQWKHFRQĂJXUDWLRQSDJHDQGFOLFNWKHRestore Default Settings button. Setting up time server Time settings and check Automatically synchronize with International servers. Select a time server from the drop-down list DQGVHW\RXUWLPH]RQH:KHQĂQLVKHGFOLFNSave/Apply. Firmware update 7RXSGDWHĂUPZDUHFOLFN0anagement -> Update Software. Click Browse to locate WKH ĂUPZDUH ĂOH WKHQ FOLFN Update Software EXWWRQ WR VWDUW XSORDGLQJ WKH ĂUPZDUH The update process takes about two minutes. 51 APPENDIX FCC Warning Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ďźReorient or relocate the receiving antenna. ďźIncrease the separation between the equipment and receiver. ďźConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. ďźConsult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the userâs authority to operate the equipment. Prohibition of Co-location This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter Safety Information To maintain compliance with FCCâs RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use on the supplied antenna. Use on the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. 52 APPENDIX Declaration of Conformity for R&TTE directive 1999/5/EC Essential requirements â Article 3 Protection requirements for health and safety â Article 3.1a Testing for electric safety according to EN 60950-1 has been conducted. These are considered relevant and sufficient. Protection requirements for electromagnetic compatibility â Article 3.1b Testing for electromagnetic compatibility according to EN 301 489-1 and EN 301 489-17 has been conducted. These are considered relevant and sufficient. Effective use of the radio spectrum â Article 3.2 Testing for radio test suites according to EN 300 328 has been conducted. These are considered relevant and sufficient. CE Mark Warning This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. 53
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2006:08:04 00:50:27Z Modify Date : 2006:08:10 16:56:24+08:00 Page Count : 55 Creation Date : 2006:08:04 00:50:27Z Mod Date : 2006:08:10 16:56:24+08:00 Producer : Acrobat Distiller 5.0.5 (Windows) Author : emma Metadata Date : 2006:08:10 16:56:24+08:00 Creator : emma Title : A5468060352.pdf Has XFA : NoEXIF Metadata provided by EXIF.tools