ASUSTeK Computer X00BD ASUS Phone User Manual

ASUSTeK Computer Inc ASUS Phone Users Manual

Users Manual

Download: ASUSTeK Computer X00BD ASUS Phone User Manual
Mirror Download [FCC.gov]ASUSTeK Computer X00BD ASUS Phone User Manual
Document ID3135690
Application IDG2ypImQgk6Cb/J3zmSh7Mw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize94.33kB (1179175 bits)
Date Submitted2016-09-15 00:00:00
Date Available2017-03-14 00:00:00
Creation Date2017-12-14 18:30:10
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-12-14 18:30:10
Document TitleUsers Manual
Document CreatorAdobe InDesign CS6 (Windows)

User Guide
E11709
15060-82600000
E11709_ZB500KG_UM_Booklet_EU.indd 1
2016-09-12 09:58:56
First Edition/ September 2016
Model: ASUS_X00BD (ZB500KG)
Before you start, ensure that you have read all the
safety information and operating instructions in this
User Guide to prevent injury or damage to your
device.
NOTE: For the latest updates and more detailed
information, please visit www.asus.com.
Front features
Receiver
Front camera
E11709_ZB500KG_UM_Booklet_EU.indd 2
LED Indicator
Sensor
Touch screen
display
Touch keys
2016-09-12 09:58:57
Side features
Power key
Audio jack
Groove
Micro USB port
NOTE: Pry open the rear cover from the groove.
E11709_ZB500KG_UM_Booklet_EU.indd 3
2016-09-12 09:58:57
Rear features
Camera lash
Rear camera
Volume key
Rear cover
•
•
Speaker
•
•
NOTES:
•
Remove the rear cover to display the dual
micro SIM and microSD card slots.
•
The micro SIM card slots support WCDMA
and GSM/EDGE network bands.
The microSD card slot supports microSD and
microSDHC card formats.
•
E11709_ZB500KG_UM_Booklet_EU.indd 4
•
•
•
2016-09-12 09:58:57
Charging your ASUS Phone
To charge your ASUS Phone:
1.
Connect the USB connector into the power
adapter’s USB port.
2.
Connect the other end of the micro USB cable
to your ASUS Phone.
3.
Plug the power adapter into a wall socket.
IMPORTANT!
•
Your ASUS Phone comes partially charged but you
must charge it fully before using it for the irst time.
Read the important notices and cautions before
charging your device.
•
When using your ASUS Phone while it is plugged to
a power outlet, the grounded power outlet must be
near to the unit and easily accessible.
•
When charging your ASUS Phone through your
computer, ensure that you plug the micro USB
cable to your computer’s USB 2.0 / USB 3.0 port.
Avoid charging your ASUS Phone in an
environment with ambient temperature of above
35oC (95oF).
•
NOTES:
•
Use only the power adapter that came with your
device. Using a different power adapter may
damage your device.
•
Using the bundled power adapter and ASUS Phone
signal cable to connect your ASUS Phone to a
power outlet is the best way to charge your ASUS
Phone.
The input voltage range between the wall outlet and
this adapter is AC 100V - 240V. The output voltage
of the micro USB cable is DC 5.2V, 1A.
•
E11709_ZB500KG_UM_Booklet_EU.indd 5
2016-09-12 09:58:57
Installing a micro SIM card
To install a micro SIM card:
1.
Locate the groove on
the bottom-right corner
of your ASUS Phone.
2.
Pry the cover loose
and then pull the rear
cover off.
•
•
•
3.
Remove the battery.
E11709_ZB500KG_UM_Booklet_EU.indd 6
•
•
2016-09-12 09:58:58
4.
Insert the micro SIM card into one of the slots.
Micro SIM card 1
Micro SIM card
2 / microSD card
combo card slot
NOTES:
•
•
The micro SIM card slot 2 is at the lower part of the
micro SIM / micro SD combo card slot.
Both Micro SIM card slots support 2G/3G WCDMA
network bands. But only one micro SIM card can
connect to 3G WCDMA service at a time.
CAUTION!
•
Do not use sharp tools or solvent on your device to
avoid scratches on it.
•
Use only a standard micro SIM card on your ASUS
Phone. A nano to micro SIM adapter or a trimmed
SIM card may not properly it into and may not be
detected by your ASUS Phone.
DO NOT install an empty nano to micro SIM
adapter into the micro SIM card slot to avoid
irreversible damage.
•
E11709_ZB500KG_UM_Booklet_EU.indd 7
2016-09-12 09:58:58
Installing a microSD card
To install a microSD card:
1.
Locate the groove on
the bottom-right corner
of your ASUS Phone.
2.
Pry the cover loose
and then pull the rear
cover off.
3.
Remove the battery.
4.
Insert the microSD card into the microSD card
slot.
E11709_ZB500KG_UM_Booklet_EU.indd 8
2016-09-12 09:58:59
FCC Regulations:
This mobile phone complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
This mobile phone has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiated radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help.
Caution: Changes or modiications not expressly
approved by the party responsible for compliance
could void the user‘s authority to operate the
equipment.
E11709_ZB500KG_UM_Booklet_EU.indd 9
2016-09-12 09:58:59
RF Exposure Information (SAR)
This phone is designed and manufactured not
to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal
Communications Commission of the United States.
During SAR testing, this device was set to
transmit at its highest certiied power level in all
tested frequency bands, and placed in positions
that simulate RF exposure in usage against the
head with no separation, and near the body with
the separation of 10 mm. Although the SAR is
determined at the highest certiied power level, the
actual SAR level of the device while operating can
be well below the maximum value. This is because
the phone is designed to operate at multiple power
levels so as to use only the power required to reach
the network. In general, the closer you are to a
wireless base station antenna, the lower the power
output.
The exposure standard for wireless devices
employing a unit of measurement is known as the
Speciic Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg.
This device is complied with SAR for general
population /uncontrolled exposure limits in
ANSI/IEEE C95.1-1992 and had been tested in
accordance with the measurement methods and
procedures speciied in IEEE1528.
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this model
phone is on ile with the FCC and can be found
under the Display Grant section of www.fcc.gov/oet/
ea/fccid after searching on FCC ID: MSQX00BD.
For this device, the highest reported SAR value for
usage against the head is 0.78 W/kg, for usage near
the body is 1.15 W/kg.
E11709_ZB500KG_UM_Booklet_EU.indd 10
2016-09-12 09:58:59
While there may be differences between the SAR
levels of various phones and at various positions,
they all meet the government requirements.
SAR compliance for body-worn operation is based
on a separation distance of 10 mm between the
unit and the human body. Carry this device at
least 10 mm away from your body to ensure RF
exposure level compliant or lower to the reported
level. To support body-worn operation, choose the
belt clips or holsters, which do not contain metallic
components, to maintain a separation of 10 mm
between this device and your body.
RF exposure compliance with any body-worn
accessory, which contains metal, was not tested
and certiied, and use such body-worn accessory
should be avoided.
Hearing Aid Compatibility (HAC)
regulations for Mobile phones
In 2003, the FCC adopted rules to make digital
wireless telephones compatible with hearing aids
and cochlear implants. Although analog wireless
phones do not usually cause interference with
hearing aids or cochlear implants, digital wireless
phones sometimes do because of electromagnetic
energy emitted by the phone’s antenna, backlight,
or other components. Your phone is compliant with
FCC HAC regulations (ANSI C63.19- 2011). While
some wireless phones are used near some hearing
devices (hearing aids and cochlear implants), users
may detect a buzzing, humming, or whining noise.
Some hearing devices are more immune than others
to this interference noise and phones also vary
in the amount of interference they generate. The
wireless telephone industry has developed a rating
system for wireless phones to assist hearing device
users in inding phones that may be compatible with
their hearing devices. Not all phones have been
rated. Phones that are rated have the rating on
E11709_ZB500KG_UM_Booklet_EU.indd 11
2016-09-12 09:58:59
their box or a label located on the box. The ratings
are not guarantees. Results will vary depending
on the user’s hearing device and hearing loss. If
your hearing device happens to be vulnerable to
interference, you may not be able to use a rated
phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your
personal needs.
This phone has been tested and rated for use with
hearing aids for some of the wireless technologies
that it uses. However, there may be some newer
wireless technologies used in this phone that have
not been tested yet for use with hearing aids. It is
important to try the different features of this phone
thoroughly and in different locations, using your
hearing aid or cochlear implant, to determine if you
hear any interfering noise. Consult your service
provider or the manufacturer of this phone for
information on hearing aid compatibility. If you have
questions about return or exchange policies, consult
your service provider or phone retailer.
M-Ratings: Phones rated M3 or M4 meet FCC
requirements and are likely to generate less
interference to hearing devices than phones that
are not labeled. M4 is the better/higher of the two
ratings.
T-Ratings: Phones rated T3 or T4 meet FCC
requirements and are likely to be more usable with
a hearing device’s telecoil (“T Switch” or “Telephone
Switch”) than unrated phones. T4 is the better/
higher of the two ratings. (Note that not all hearing
devices have telecoils in them.)
Your phone meets the M3/T3 level rating.
Hearing devices may also be rated. Your hearing
device manufacturer or hearing health professional
may help you ind this rating. For more information
about FCC Hearing Aid Compatibility, please go to
http://www.fcc.gov/cgb/dro.
E11709_ZB500KG_UM_Booklet_EU.indd 12
2016-09-12 09:58:59
CE RF Exposure Compliance
This device meets the EU requirements (1999/519/
EC) on the limitation of exposure of the general
public to electromagnetic ields by way of health
protection.
For body-worn operation, this device has been
tested and meets the ICNIRP guidelines and the
European Standard EN 62209-2, for use with
dedicated accessories. SAR is measured with
this device at a separation of 0.5 cm to the body,
while transmitting at the highest certiied output
power level in all frequency bands of this device.
Use of other accessories which contain metals
may not ensure compliance with ICNIRP exposure
guidelines.
CE Mark Warning
CE marking for devices with wireless
LAN/ Bluetooth
This equipment complies with the requirements of
Directive 1999/5/EC of the European Parliament
and Commission from 9 March, 1999 governing
Radio and Telecommunications Equipment and
mutual recognition of conformity. The highest CE
SAR values for the device are as follows:
•
0.511 W/Kg (Head)
•
0.796 W/Kg (Body)
E11709_ZB500KG_UM_Booklet_EU.indd 13
2016-09-12 09:58:59
Using GPS (Global Positioning
System) on your ASUS Phone
To use the GPS positioning feature on your ASUS
Phone:
•
Ensure that your device is connected to the
Internet before using Google Map or any GPSenabled apps.
•
For irst-time use of a GPS-enabled app on
your device, ensure that you are outdoors to
get the best positioning data.
•
When using a GPS-enabled app on your
device inside a vehicle, the metallic component
of the car window and other electronic devices
might affect the GPS performance.
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen at
high volume levels for long periods.
For France, headphones/earphones for this
device are compliant with the sound pressure level
requirement laid down in the applicable EN 503321:2013 and/or EN50332-2:2013 standard required
by French Article L.5232-1.
E11709_ZB500KG_UM_Booklet_EU.indd 14
2016-09-12 09:58:59
Safety information
ASUS Phone care
•
Use your ASUS Phone in an environment with
ambient temperatures between 0°C (32 °F) and
35 °C (95 °F).
The battery
Your ASUS Phone is equipped with a high
performance detachable Li-Ion battery. Observe the
maintenance guidelines for a longer battery life.
•
Avoid charging in extremely high or low
temperature. The battery performs optimally in
an ambient temperature of +5 °C to +35 °C.
•
Use only ASUS battery. Using a different
battery may cause physical harm/injury and
may damage your device.
•
Do not remove and soak the battery in water or
any other liquid.
•
Never try to open the battery as it contains
substances that might be harmful if swallowed
or allowed to come into contact with
unprotected skin.
•
Do not remove and short-circuit the battery, as
it may overheat and cause a ire. Keep it away
from jewelry or metal objects.
•
Do not remove and dispose of the battery
in ire. It could explode and release harmful
substances into the environment.
•
Do not remove and dispose of the battery with
your regular household waste. Take it to a
hazardous material collection point.
•
Do not touch the battery terminals.
•
To avoid ire or burns, do not disassemble,
bend, crush, or puncture the battery.
E11709_ZB500KG_UM_Booklet_EU.indd 15
2016-09-12 09:58:59
NOTES:
•
•
Risk of explosion if battery is replaced by an
incorrect type.
Dispose of used battery according to the
instructions.
The charger
•
Use only the charger supplied with your ASUS
Phone.
•
Never pull the charger cord to disconnect it
from the power socket. Pull the charger itself.
Caution
Your ASUS Phone is a high quality piece of
equipment. Before operating, read all instructions
and cautionary markings on the (1) AC Adapter.
•
Do not use the ASUS Phone in an extreme
environment where high temperature or high
humidity exists. The ASUS Phone performs
optimally in an ambient temperature between 0
°C (32°F) and 35 °C (95 °F).
•
Do not disassemble the ASUS Phone or its
accessories. If service or repair is required,
return the unit to an authorized service center.
If the unit is disassembled, a risk of electric
shock or ire may result.
•
Do not short-circuit the battery terminals with
metal items.
Operator access with a tool
If a TOOL is necessary to gain access to an
OPERATOR ACCESS AREA, either all other
compartments within that area containing a hazard
shall be inaccessible to the OPERATOR by the use
of the same TOOL, or such compartments shall be
marked to discourage OPERATOR access.
E11709_ZB500KG_UM_Booklet_EU.indd 16
to th
or ot
2016-09-12 09:59:00
ASUS Recycling/Takeback
Services
ASUS recycling and takeback programs come
from our commitment to the highest standards for
protecting our environment. We believe in providing
solutions for you to be able to responsibly recycle
our products, batteries, other components as well
as the packaging materials. Please go to http://
csr.asus.com/english/Takeback.htm for detailed
recycling information in different regions.
Proper disposal
Risk of explosion if battery is replaced
by an incorrect type. Dispose of used
batteries according to the instructions.
DO NOT throw the battery in municipal
waste. The symbol of the crossed out
wheeled bin indicates that the battery
should not be placed in municipal waste.
DO NOT throw this product in municipal
waste. This product has been designed
to enable proper reuse of parts and
recycling. The symbol of the crossed out
wheeled bin indicates that the product
(electrical, electronic equipment and
mercury-containing button cell battery)
should not be placed in municipal waste.
Check local regulations for disposal of
electronic products.
DO NOT throw this product in ire. DO
NOT short circuit the contacts. DO NOT
disassemble this product.
WARNING! This product may contain chemicals known
to the State of California to cause cancer, birth defects,
or other reproductive harm. Wash hands after handling.
E11709_ZB500KG_UM_Booklet_EU.indd 17
2016-09-12 09:59:00
EU Declaration of Conformity
We, the undersigned,
Manufacturer:
ASUSTeK COMPUTER INC.
Address:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Authorized representative in Europe:
ASUS COMPUTER GmbH
Address, City:
HARKORT STR. 21-23, 40880 RATINGEN
Country:
GERMANY
declare the following apparatus:
Product name :
ASUS Phone
Model name :
ASUS_X00BD
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
EMC – Directive 2004/108/EC (until April 19th, 2016) and Directive 2014/30/EU (from April 20th, 2016)
EN 55022:2010+AC:2011
EN 55032:2012+AC:2013
EN 55024:2010
EN 61000-3-3:2013
EN 61000-3-2:2014
R&TTE – Directive 1999/5/EC
EN 300 328 V1.9.1(2015-02)
EN 300 330-1 V1.8.1(2015-03)
EN 300 330-2 V1.6.1(2015-03)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V12.1.1(2015-06)
EN 301 908-1 V7.1.1(2015-03)
EN 301 908-2 V7.1.1(2015-12)
EN 301 908-13 V7.1.1(2015-12)
EN 301 893 V1.8.1(2015-03)
EN 62479:2010
EN 62311:2008
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-08)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-10)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 50360:2001/A1:2012
EN 50566:2013/AC:2014
EN 62209-1:2006
EN 62209-2:2010
LVD – Directive 2006/95/EC (until April 19th, 2016) and Directive 2014/35/EU (from April 20th, 2016)
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60065:2002 / A12: 2011
Ecodesign – Directive 2009/125/EC
Regulation (EC) No. 1275/2008
Regulation (EC) No. 642/2009
Regulation (EC) No. 278/2009
Regulation (EU) No. 617/2013
RoHS – Directive 2011/65/EU
CE marking
Equipment Class 1
Ver. 160217
(EU conformity marking)
Taipei, Taiwan
Place of issue
Signature
Jerry Shen
9/9/2016
Printed Name
Date of issue
CEO
2016
Position
Year CE marking was first affixed
EU Konformitätserklärung
Hiermit erklären wir,
Hersteller:
ASUSTeK COMPUTER INC.
Anschrift:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Bevollmächtigter:
ASUS COMPUTER GmbH
Anschrift des Bevollmächtigten:
HARKORT STR. 21-23, 40880 RATINGEN
Land:
GERMANY
dass nachstehend bezeichnete Produkte
Produktbezeichnung
ASUS Phone
Modellbezeichnung:
ASUS_X00BD
mit den nachstehend angegebenen, für das Produkt geltenden Richtlinien/Bestimmungen übereinstimmen:
EMV – Richtlinie 2004/108/EG (bis 19. April 2016) und Richtlinie 2014/30/EU (ab 20. April 2016)
EN 55022:2010+AC:2011
EN 55032:2012+AC:2013
EN 55024:2010
EN 61000-3-3:2013
EN 61000-3-2:2014
R&TTE – Richtlinie 1999/5/EG
EN 300 328 V1.9.1(2015-02)
EN 300 330-1 V1.8.1(2015-03)
EN 300 330-2 V1.6.1(2015-03)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V12.1.1(2015-06)
EN 301 908-1 V7.1.1(2015-03)
EN 301 908-2 V7.1.1(2015-12)
EN 301 908-13 V7.1.1(2015-12)
EN 301 893 V1.8.1(2015-03)
EN 62479:2010
EN 62311:2008
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-08)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-10)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 50360:2001/A1:2012
EN 50566:2013/AC:2014
EN 62209-1:2006
EN 62209-2:2010
LVD – Richtlinie 2006/95/EG (bis 19. April 2016) und Richtlinie 2014/35/EU (ab 20. April 2016)
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60065:2002 / A12: 2011
Ökodesign – Richtlinie 2009/125/EG
Verordnung (EG) No. 1275/2008
Verordnung (EG) No. 642/2009
Verordnung (EG) No. 278/2009
Verordnung (EU) No. 617/2013
RoHS – Richtlinie 2011/65/EU
CE Kennzeichen
Geräteklasse 1
Ver. 160217
(EU Konformitätszeichen)
Unterschrift
Jerry Shen
Name
Taipei, Taiwan
Ort
9/9/2016
Datum
CEO
2016
Position
Jahr der Kennzeichenvergabe
E11709_ZB500KG_UM_Booklet_EU.indd 18
2016-09-12 09:59:00
UE Declaración de Conformidad
Nosotros, los abajo firmantes,
Fabricante:
ASUSTeK COMPUTER INC.
Dirección:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Representante autorizado en Europa:
ASUS COMPUTER GmbH
Dirección, Ciudad:
HARKORT STR. 21-23, 40880 RATINGEN
País:
GERMANY
Declaramos el siguiente producto:
Nombre del aparato :
ASUS Phone
Nombre del modelo :
ASUS_X00BD
El objeto de la declaración descrita anteriormente es conforme con la legislación de armonización pertinente de la Unión:
EMC Directiva 2004/108/CE (hasta el 19 de abril, 2016) y Directiva 2014/30/UE (desde el 20 de abril, 2016)
EN 55022:2010+AC:2011
EN 55032:2012+AC:2013
EN 55024:2010
EN 61000-3-3:2013
EN 61000-3-2:2014
R&TTE – Directiva 1999/5/CE
EN 300 328 V1.9.1(2015-02)
EN 300 330-1 V1.8.1(2015-03)
EN 300 330-2 V1.6.1(2015-03)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V12.1.1(2015-06)
EN 301 908-1 V7.1.1(2015-03)
EN 301 908-2 V7.1.1(2015-12)
EN 301 908-13 V7.1.1(2015-12)
EN 301 893 V1.8.1(2015-03)
EN 62479:2010
EN 62311:2008
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-08)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-10)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 50360:2001/A1:2012
EN 50566:2013/AC:2014
EN 62209-1:2006
EN 62209-2:2010
LVD Directiva 2006/95/CE (hasta el 19 de abril, 2016) y Directiva 2014/35/UE (desde el 20 de abril, 2016)
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60065:2002 / A12: 2011
Diseño Ecológico – Directiva 2009/125/CE
Regulation (EC) No. 1275/2008
Regulation (EC) No. 642/2009
Regulation (EC) No. 278/2009
Regulation (EU) No. 617/2013
RoHS – Directiva 2011/65/UE
Marcado CE
Clase de equipo 1
Ver. 160217
(marcado CE de conformidad)
Taipei, Taiwan
Lugar de emisión
Firma
Jerry Shen
9/9/2016
Nombre impreso
Fecha de emisión
CEO
2016
Posición
Año en que se colocó
el marcado CE por primera vez
DECLARATION UE DE CONFORMITE
Nous, soussignés
Fabricant:
ASUSTeK COMPUTER INC.
Adresse:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Représentant autorisé en Europe:
ASUS COMPUTER GmbH
Adresse, ville:
HARKORT STR. 21-23, 40880 RATINGEN
Pays:
GERMANY
Déclarons l’appareil suivant:
Nom du produit :
ASUS Phone
Nom du modèle :
ASUS_X00BD
L’objet de la déclaration décrit ci-dessus est conforme avec la législation d’harmonisation de l’Union applicable
Directive CEM 2004/108/CE (jusqu’au 19 avril 2016) et la directive 2014/30/UE (à partir du 20 avril 2016)
EN 55022:2010+AC:2011
EN 55032:2012+AC:2013
EN 55024:2010
EN 61000-3-3:2013
EN 61000-3-2:2014
Directive R&TTE 1999/5/CE
EN 300 328 V1.9.1(2015-02)
EN 300 330-1 V1.8.1(2015-03)
EN 300 330-2 V1.6.1(2015-03)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V12.1.1(2015-06)
EN 301 908-1 V7.1.1(2015-03)
EN 301 908-2 V7.1.1(2015-12)
EN 301 908-13 V7.1.1(2015-12)
EN 301 893 V1.8.1(2015-03)
EN 62479:2010
EN 62311:2008
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-08)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-10)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 50360:2001/A1:2012
EN 50566:2013/AC:2014
EN 62209-1:2006
EN 62209-2:2010
Directive LVD 2006//125/CE (jusqu’au 19 avril 2016) et la directive 2014/34/UE (à partir du 20 avril 2016)
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60065:2002 / A12: 2011
Directive écoconception 2009/125/CE
Regulation (CE) No. 1275/2008
Regulation (CE) No. 642/2009
Regulation (CE) No. 278/2009
Regulation (UE) No. 617/2013
Directive RoHS 2011/65/UE
Marquage CE
Equipement de classe 1
Ver. 160217
(Marquage UE de conformité)
Signature
Taipei, Taiwan
Lieu de délivrance
Jerry Shen
9/9/2016
Nom en caractères d’imprimerie
Date d'Emission
CEO
2016
Position
Année où commence l’apposition
du marquage CE
E11709_ZB500KG_UM_Booklet_EU.indd 19
2016-09-12 09:59:01
Declaração CE de Conformidade
Nós, os abaixo-assinados,
Fabricante:
ASUSTeK COMPUTER INC.
Endereço:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Representante autorizado na Europa:
ASUS COMPUTER GmbH
Endereço, cidade:
HARKORT STR. 21-23, 40880 RATINGEN
País:
GERMANY
declaramos o seguinte aparelho:
Nome do produto:
ASUS Phone
Nome do modelo:
ASUS_X00BD
O objeto da declaração acima descrito está em conformidade com a legislação de harmonização da União aplicável:
EMC Diretiva 2004/108/CE (até 19 de abril de 2016) e Diretiva 2014/30/UE (a partir de 20 de abril de 2016)
EN 55022:2010+AC:2011
EN 55032:2012+AC:2013
EN 55024:2010
EN 61000-3-3:2013
EN 61000-3-2:2014
R&TTE – Diretiva 1999/5/CE
EN 300 328 V1.9.1(2015-02)
EN 300 330-1 V1.8.1(2015-03)
EN 300 330-2 V1.6.1(2015-03)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V12.1.1(2015-06)
EN 301 908-1 V7.1.1(2015-03)
EN 301 908-2 V7.1.1(2015-12)
EN 301 908-13 V7.1.1(2015-12)
EN 301 893 V1.8.1(2015-03)
EN 62479:2010
EN 62311:2008
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-08)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-10)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 50360:2001/A1:2012
EN 50566:2013/AC:2014
EN 62209-1:2006
EN 62209-2:2010
LVD Diretiva 2006/95/CE (até 19 de abril de 2016) and Diretiva 2014/35/UE (a partir de 20 de abril de 2016)
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60065:2002 / A12: 2011
EcoEcodesign – Diretiva 2009/125/CE
Regulation (EC) No. 1275/2008
Regulation (EC) No. 642/2009
Regulation (EC) No. 278/2009
Regulation (EU) No. 617/2013
RoHS – Diretiva 2011/65/UE
Marcação CE
Classe de equipamento 1
Ver. 160217
(Marcação CE de conformidade)
Taipei, Taiwan
Local de emissão
Assinatura
Jerry Shen
9/9/2016
Nome impresso
Subsemnatul,
Data de emissão
CEO
2016
Posição
Ano marcação CE foi aposta por primeira vez
Declaraţie de conformitate UE
Producător :
ASUSTeK COMPUTER INC.
Adresă:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Reprezentant autorizat în Europa:
ASUS COMPUTER GmbH
Adresă, Oraş:
HARKORT STR. 21-23, 40880 RATINGEN
Ţară:
GERMANIA
declară următorul aparat:
Nume Produs :
ASUS Phone
Nume Model :
ASUS_X00BD
Obiectul declarației descris mai sus este în conformitate cu legislația relevantă de armonizare a Uniunii :
CEM – Directiva 2004/108/CE (până în 19 Aprilie 2016) şi Directiva 2014/30/UE (până în 20 Aprilie 2016)
EN 55022:2010+AC:2011
EN 55032:2012+AC:2013
EN 55024:2010
EN 61000-3-3:2013
EN 61000-3-2:2014
R&TTE – Directiva 1999/5/CE
EN 300 328 V1.9.1(2015-02)
EN 300 330-1 V1.8.1(2015-03)
EN 300 330-2 V1.6.1(2015-03)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V12.1.1(2015-06)
EN 301 908-1 V7.1.1(2015-03)
EN 301 908-2 V7.1.1(2015-12)
EN 301 908-13 V7.1.1(2015-12)
EN 301 893 V1.8.1(2015-03)
EN 62479:2010
EN 62311:2008
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-08)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-10)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 50360:2001/A1:2012
EN 50566:2013/AC:2014
EN 62209-1:2006
EN 62209-2:2010
LVD – Directiva 2006/95/CE (până în 19 Aprilie 2016) şi Directiva 2014/35/UE (până în 20 Aprilie 2016)
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60065:2002 / A12: 2011
Ecodesign – Directiva 2009/125/CE
Regulation (EC) No. 1275/2008
Regulation (EC) No. 642/2009
Regulation (EC) No. 278/2009
Regulation (EU) No. 617/2013
RoHS – Directiva 2011/65/UE
Marcajul CE
Echipament Clasa 1
Ver. 160217
(Marcaj de conformitate UE )
Semnătură
Jerry Shen
Nume
Taipei, Taiwan
Locul emiterii
9/9/2016
Data emiterii
CEO
2016
Funcţie
Anul în care Marcajul CE a fost aplicat pentru
prima oară
E11709_ZB500KG_UM_Booklet_EU.indd 20
2016-09-12 09:59:01
EU Uygunluk Beyanı
Biz, bu imza altındakiler
Üretici:
ASUSTeK COMPUTER INC.
Adres:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Avrupa’daki Yetkili:
ASUS COMPUTER GmbH
Adres, Şehir:
HARKORT STR. 21-23, 40880 RATINGEN
Ülke:
ALMANYA
Aşağıdaki ürünleri beyan ediyoruz :
Ürün adı :
ASUS Phone
Model adı :
ASUS_X00BD
Yukarıda belirtilen beyanın konusu birlik yasalarına göre uygundur:
EMC – Direktif 2004/108/EC 19 Nisan 2016’ya kadar ve Direktif 2014/30/EU 20 Nisan 2016
EN 55022:2010+AC:2011
EN 55032:2012+AC:2013
EN 55024:2010
EN 61000-3-3:2013
EN 61000-3-2:2014
R&TTE – Direktifi 1999/5/EC
EN 300 328 V1.9.1(2015-02)
EN 300 330-1 V1.8.1(2015-03)
EN 300 330-2 V1.6.1(2015-03)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V12.1.1(2015-06)
EN 301 908-1 V7.1.1(2015-03)
EN 301 908-2 V7.1.1(2015-12)
EN 301 908-13 V7.1.1(2015-12)
EN 301 893 V1.8.1(2015-03)
EN 62479:2010
EN 62311:2008
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-08)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-10)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 50360:2001/A1:2012
EN 50566:2013/AC:2014
EN 62209-1:2006
EN 62209-2:2010
LVD – Direktifi 2006/95/19 Nisan 2016’ya kadar ve Direktif 2014/35/EU 20 Nisan 2016
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60065:2002 / A12: 2011
Ecodesign – Direktif 2009/125/EC
Regulation (EC) No. 1275/2008
Regulation (EC) No. 642/2009
Regulation (EC) No. 278/2009
Regulation (EU) No. 617/2013
RoHS – Direktifi 2011/65/EU
CE işareti
Ekipman Sınıfı 1
Ver. 160217
(EU uygunluk işareti)
İmza
Jerry Shen
Basılı Ad
Taipei, Taiwan
Sürüm yeri
9/9/2016
Sürüm tarihi
CEO
2016
Pozisyonu
CE işaretinin ilk eklendiği yıl
E11709_ZB500KG_UM_Booklet_EU.indd 21
2016-09-12 09:59:01
ASUS
Address: 4F, No.150 Li-Te Rd., Peitou, Taipei,
Taiwan
Tel: 886228943447
Fax: 886228907698
Declaration
We declare that the IMEI codes for this product, ASUS
Phone, are unique to each unit and only assigned to
this model. The IMEI of each unit is factory set and
cannot be altered by the user and that it complies
with the relevant IMEI integrity related requirements
expressed in the GSM standards.
Should you have any questions or comments regarding
this matter, please contact us.
Sincerely yours,
ASUSTeK COMPUTER INC.
Tel: 886228943447
Fax: 886228907698
Support: http://vip.asus.com/eservice/techserv.aspx
Copyright © 2016 ASUSTeK COMPUTER INC.
All Rights Reserved.
You acknowledge that all rights of this Manual remain with ASUS.
Any and all rights, including without limitation, in the Manual or
website, and shall remain the exclusive property of ASUS and/or its
licensors. Nothing in this Manual intends to transfer any such rights,
or to vest any such rights to you.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY
OF ANY KIND. SPECIFICATIONS AND INFORMATION
CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE
AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE
CONSTRUED AS A COMMITMENT BY ASUS.
ZenTalk Fans Forum
(http://www.asus.com/zentalk/global_forward.php)
E11709_ZB500KG_UM_Booklet_EU.indd 22
2016-09-12 09:59:01
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Tagged PDF                      : Yes
Page Mode                       : UseThumbs
XMP Toolkit                     : 3.1-701
Create Date                     : 2016:09:12 09:58:56+08:00
Metadata Date                   : 2016:09:12 09:59:15+08:00
Modify Date                     : 2016:09:12 09:59:15+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:19110932-9958-4fbf-a20d-ac2ff4d477bc
Original Document ID            : adobe:docid:indd:6e7de199-93df-11e3-993e-ee19c20c8249
Document ID                     : xmp.id:B3BB3F3F8C78E611AD639969E674ABBF
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:B1BB3F3F8C78E611AD639969E674ABBF
Derived From Document ID        : xmp.did:14CCE2B4F547E61186DCF0AC6A636237
Derived From Original Document ID: adobe:docid:indd:6e7de199-93df-11e3-993e-ee19c20c8249
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2016:09:12 09:58:56+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 22
Page Layout                     : SinglePage
Has XFA                         : No
Creator                         : Adobe InDesign CS6 (Windows)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MSQX00BD

Navigation menu