ATBS Technology AT63 BLE TPMS User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3116055
Application ID	gep/Oa4pYdZTLOLaxVk7lA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	428.71kB (5358835 bits)
Date Submitted	2016-08-30 00:00:00
Date Available	2016-09-05 00:00:00
Creation Date	2016-08-19 16:40:10
Producing Software	Microsoft® Word 2013
Document Lastmod	2016-08-30 11:57:04
Document Title	全頁相片
Document Creator	Microsoft® Word 2013
Document Author:	Patrick Peng

AT63 sensor User’s guide
3.1.2 Remove original valve cap and screw lock nut (1)
1. Introduction
This AT63 BLE sensor is a type of sensor that
and will become (2). Screw the Sensor onto valve stem
combined TPMS and cellphone. AT63 TPMS external
clockwise (3). Screw (1) lock nut back and use wrench
sensor adapts BLE low energy transmission, let driver
to lock tightly (4). (3)(4) steps could effectively prevents
understand tire situation through cellphone. When the
sensor from removing.
system detects tire pressure or temperature abnormal
situation, it (APP) will directly alarm the driver.
About This Manual：

The information in this manual is subject to change
without notice.

This manual has been created with extra care. In case
that you have any comments or questions regarding
this manual, please contact your local dealer or our
3.1.3 The sensor label already indicates the sensor ID
and its wheel order, please follow the wheel order to
install sensors.
Customer Service Center.

Before operating this set, please fully understand the
EX :
prerequisite such as specifications or constraints of
Sensor Model: AT63
ID:810C619A
the hardware and software. We are not responsible
and have no liability for any loss, damage or injury as a
result of misuse.
2. Check Accessories
Model
Photograph
AT63 sensor
Battery
Lock nut
Note：
(1) Beware of the conductivity between the sensor
and valve stem.
(2) Sensors are supposed to be well locked valve
stem to avoid from leaking.
(3) Please replace original manufacturer’s sensor
battery in case voltage is below 2.7v.
(4)External sensor will transmit data every 58~62
seconds when the vehicle is running, and when
the vehicle stops, the sensor will transmit data
every 148~152 seconds.
Wrench
Userguide
3. System installation
3.1 Install sensor(battery changeable)
3.1.1 Place batteries into the sensor and screw the top
cap off. Please attend to the electrode of the battery.
Copyright (C) ATBS Technology Co. R7
版權所有請勿翻印
4. iTPMS APP Installation:
iTPMS App is for free. Through the iTPMS you can know
tire temperature and pressure, sensor battery voltage,
and each sensor’s ID.
4.2 App Operating
4.2.1 Click below ID, and enter the ID learning page, start
to learn the sensor ID.
4.1 Install APP (Take IOS as example)
4.1.1 Download the APP: iTPMS BLE from Apple Store or
Google Play.
4.1.2 Go to Setting => General => Bluetooth Page.
4.1.3 Turn on the Bluetooth
Note: When the above BLE words light up, then it
represents it detects AT63’s signal already.
4.1.4: Turn on the Bluetooth, and it will scan the devices
automatically.
4.1.5 Install battery properly, and then enter to the sensor
ID setting pages. After setting the ID properly, it will
read the tire data immediately.
Copyright (C) ATBS Technology Co. R7
4.2.2 Place batteries into the sensor properly. When
sensor detects pressure, ID will turn to red to alert the
user.
4.2.3 Enter Setup page, users can set up the unit and limit
of tire pressure and temperature.
版權所有請勿翻印
4.2.4
In the meantime, this TPMS program also afford user to
manual input the ID function and scanning QR function,
please refer to the following steps:
A) Manual key in ID steps:
1)
Click the right upper “Edit”
B) Steps for scanning QR Code:
1) Click middle QR buttom
2) Enter into ID Read page, and click the blank to start
scanning QR code. And then click save.
2) Turn to New page
3) Click the blank and appear keyboard, enter the ID and
3) Click “Yes”
4) Click SAVE and then
click save.
click yes, and it’s done.
4) Click “Yes”
Note:
5)
Click Cancel and back to learn ID page.
Click SAVE and then click yes, and it’s done.
Note: Be sure you already turn on the Bluetooth
5. Specification
5.1 AT63 Sensor
Model
AT63
Operation
-40℃~ 85℃
Temperature
Operation
100%, IP 68
Humidity
Total Outer
22±0. 2mm
meter
Total Height
Copyright (C) ATBS Technology Co. R7
21±0. 2mm
版權所有請勿翻印


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Patrick Peng
Create Date                     : 2016:08:19 16:40:10+08:00
Modify Date                     : 2016:08:30 11:57:04+08:00
Page Count                      : 4
Language                        : zh-TW
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Microsoft® Word 2013
Creator Tool                    : Microsoft® Word 2013
Title                           : 全頁相片
Creator                         : Patrick Peng

EXIF Metadata provided by EXIF.tools