ATEC AV370A 37 Inches TFT LCD TV User Manual

ATEC Co., Ltd. 37 Inches TFT LCD TV Users Manual

User Manual 4

LCD TV Overview and Installation1-11LCD Display Overview
Before Using the Remote Control Inserting the batteries in the Remote ControlYou must insert or replace the batteries in the remote control.❶Open the cover.❷Insert batteries with the correct polarity(+, -).❸Close the cover.N󳀏O󳀏T󳀏E 󳀏S ▶Always use recommended batteries only; use of other batteries may result in battery leakage orcorrosion.▶Do not insert the batteries with the wrong polarity.▶Do not put spent batteries in a fire.▶Do not leave completely-used batteries in the remote control. Leaving them in place for a long time maycause corrosion of the electrodes in the remote control.▶Replace the batteries with new ones, if the remote control does not work well.1-12 Remote Control
LCD TV Overview and InstallationInformation on the Use of the Remote Control●When using the remote control, point it towards the Power Indication Lamp ofthe LCD Display.●The operating distance should be within 23 feet.●The receiving angle should be within 30 degrees.N󳀏O󳀏T󳀏E 󳀏S ▶Do not subject the remote control to shock. It may get damaged.▶Be caregul not to let water get into the remote control. It may cause damage.▶Do not disassemble the remote control.▶Do not expose the remote control to direct sunlight or other strong light. The remote control may notwork normally.▶Do not keep in cold or humid places. It may cause defects.1-13Remote Control
LCD TV Overview and InstallationRemote Control Button FunctionsPOWER ButtonTurns the display On or Off.1NUMBER ButtonsDirect channel select. Direct page selection during Teletext display.2146789101213115182220211914161517231-14 Remote Control
LCD TV Overview and InstallationN󳀏O󳀏T󳀏E ▶PC Mode(CSM) : Warm, Normal, Cool, User<16:9> <Zoom 1><14:9>SSM (Sound Status Memory) ButtonRecalls your preferred sound setting. (Flat, Music, Movie, Speech, User)5‘ ’ ButtonSet a channel on the digital TV.3MENU ButtonDisplays OSD Menu.6PSM (Picture Status Memory) ButtonRecalls your preferred picture setting. (Dynamic, Standard, Game, Mild, User)4VOL ◀/▶(-/+) ButtonsIncreases or decreases the volume. Also used to select the OSD main menu, to select thesub-menu or to change the values in sub-menus.7TV/AV ButtonIt converts to TV input mode and, if you press and hold the button, input mode will beswitched.8SLEEP ButtonSets the sleep timer. The TV is automatically turned off.9ARC (Aspect Ratio Control) ButtonYou can watch the LCD Display in various picture formats ; 16:9, 14:9, Zoom 1, Zoom 2, 4:3.Repeatedly press the ARC button to select your chosen picture format.101-15Remote Control
LCD TV Overview and InstallationSWAP ButtonSwaps the main screen for a sub-screen (only in PIP, POP, PBP mode).15Q.VIEW ButtonIt goes from the channel you are currently viewing back to the channel you were previouslywatching. (Quick Search View Function)16CAPTION ButtonControls the caption decoder.13P.POSITION ButtonChanges the PIP sub-window to 4 different corner locations. PIP Position Change (PIP Mode only).14OK ButtonSelect sub-menu or fix user setting.17P.INPUT ButtonChanges the PIP input source.11PIP ButtonChanges the screen size. PIP(Small), PIP(Large), POP, PBP1, PBP2 screen change.PIP(Small) PIP(Large) POP PBP1 PBP2121-16 Remote Control<Zoom 2> <4:3>
LCD TV Overview and InstallationMUTE ButtonPress to temporarily cut off the sound.19CH ▼/▲ButtonsPress CH ▼or CH ▲to change channels. Also used to select in the OSD menu orselect the channel providing teletext service.18MTS ButtonPress to choose stereo, mono or Separate Audio Program (SAP broadcast).20EPG(Electronic Program Guide) ButtonView a program guide for the digital TV.21SOURCE ButtonSelects the external input source. (TV, AV1, AV2, AV3, COMPONENT, RGB, DVI)221-17Remote Control
Connecting the Aerial or Cable Television NetworkTo view television channels correctly, a signal must be received by the set from oneof following sources:●An outdoor aerial●An indoor aerial (not recommended)●A cable television networkVHF Outdoor AntennaUHF Outdoor AntennaVHF/UHF MixerElectronic Amplifier75ΩCoaxial Cable (Optional)or300ΩFeeder Cable (Optional) Antenna Converter(Optional)When connecting an outdoor antenna Antenna connection is the most important factor for obtaining clean and sharp videoquality. Whenever possible, use an external antenna in areas with weak signals.1In the first three cases, connect the aerial or network input cable to the 75Ωcoaxialsocket on the rear of the TFT LCD display.2Press the TV button on the remote control.Use only when necessary. (Optional)1-18 Connecting the LCD TV and Peripheral Devices
LCD TV Overview and InstallationWhen connecting an indoor antenna (cable TV)Check the antenna connector on the wall and then connect the antenna cable.N󳀏O󳀏T󳀏E 󳀏S▶▶Connecting 300ΩΩfeeder cable to the antenna converter▶If the video is not clear because of weak signals, install a signal amplifier to obtain clearer video. (Anamplifier is often necessary when using an indoor antenna.)❶Remove the insulation fromthe 300Ωfeeder cable.❷Use the 󳁴driver toloosen the screw.❸Connect the 300Ωfeedercable, and secure it byretightening the screw withthe screwdriver.1-19Connecting the LCD TV and Peripheral Devices
LCD TV Overview and InstallationConnecting VCRWhen connecting to the composite connector Different jacks on the rear panel are used for different external devices.VCRComposite Audio/Video cable (Optional)N󳀏O󳀏T󳀏E ▶S-video and composite video signals share the audio signals.Method 1Method 2VCRComposite Audio/Video cable (Optional)1-20 Connecting the LCD TV and Peripheral Devices

Navigation menu