ATEC AV370A 37 Inches TFT LCD TV User Manual

ATEC Co., Ltd. 37 Inches TFT LCD TV Users Manual

User Manual 9

Using the LCD TV2-31Configuring the PIP/POP/PBP Functions
Various functions for watching TV can be configured. (Language, Transparency, ISM Method, Timer, Caption, Parental etc.)Selecting the Main Screen LanguagePress the <MENU> button on the remote control.1Press the < > button on the remote control to navigate to the ‘SET UP’ menu.2Press the < > button on the remote control to navigate to the ‘Language’submenu. Press the < > button on the remote control to select the preferredlanguage. When selection is complete, press the <OK> button.(English, Deutsch, Français, Español, Italiano, Korean)3When configuration is complete, press the <MENU> button to close the ‘Menu’ screen.42-32 To Configure the SET UP
Using the LCD TVAdjusting Image TransparencyPress the <MENU> button on the remote control.1Press the < > button on the remote control to navigate to the ‘SET UP’ menu.2Press the < > button on the remote control to navigate to the ‘Transparency’submenu. Press the < > button on the remote control to adjust the ImageTransparency. When adjustment is complete, press the <OK> button (the settingspossible are 0~10).<Before Adjusting Image Transparency: 0> <After Adjusting Image Transparency: 10>3When configuration is complete, press the <MENU> button to close the ‘Menu’ screen.42-33To Configure the SET UP
Using the LCD TVSetting Sleep TimerSet the sleep timer to switch the TV power to the standby mode automatically when aspecified time has elapsed.Press the <MENU> button on the remote control.1Press the < > button on the remote control to navigate to the ‘SET UP’ menu.2Under ‘Clock’, press the < > button and the < > button on the remote control toset the current time. (When setting time, press the < > button on the remote controlto set ‘Hour’, press the < > button to move to’Minutes’, press the < > button toset ‘Minutes’, press the < > button to move to ‘AM/PM’, and press the < >button to select ‘AM/PM’.)4Select Auto to specify the Time Zone.5Press the < > button on the remote control to navigate to the ‘Timer’ submenu, andpress the < > button on the remote control. The ‘Time Selection’ screen will bedisplayed.3When setting is complete, press the < > button on the remote control to navigate to‘Clock’, and press the < > button to navigate to ‘Off Timer’.6N󳀏O󳀏T󳀏E ▶Press the <SLEEP TIMER> button on the remote control to set the sleep timer.2-34 To Configure the SET UP
Using the LCD TVIn ‘Off Timer’, press the < > button and the < > button on the remote control to setthe ‘TV Off’ timer. (When setting time, press the < > button on the remote control toset ‘Hour’, press the < > button to move to ‘Minutes’, press the < > button to set‘Minutes’, press the < > button to move to ‘AM/PM’, and press the < > button toselect ‘AM/PM’.)7When configuration is complete, press the < > button on the remote control to navigateto ‘Off Timer’, and press the < > button on the remote control to navigate to ‘AutoOff’. Press the < > button on the remote control to select ‘On’.8When configuration is complete, press the <MENU> button to close the ‘Menu’ screen.9N󳀏O󳀏T󳀏E ▶To turn the TV off automatically, see the section on ‘Off Timer’ settings for visual settings.The program channel and volume level can also be configured for cases when the LCD TV is turned on.Viewing Closed CaptionsThe LCD TV can decodes and displays the closed caption that are broadcast withcertain TV shows. These captions are usually subtitles for the hearing impaired orforeign-language translations. All VCRs record the closed caption signal fromtelevision program, so home-recorded video tapes also provide closed captions. Mostprerecorded commercial video tapes provide closed captions as well. Check for theclosed caption symbol in television schedule and on the tape’s packing : CCPress the <MENU> button on the remote control.1Press the < > button on the remote control to navigate to the ‘SET UP’ menu.2N󳀏O󳀏T󳀏E ▶The Caption feature does not work with PC signals.2-35To Configure the SET UP
Using the LCD TVPress the < > button on the remote control to navigate to the ‘Caption’submenu.3Press the < > buttons on the remote control.4N󳀏O󳀏T󳀏E 󳀏S▶In Caption mode, captions appear at the bottom of the screen, and they usually cover only a small portionof the picture.▶In TEXT mode, information is not related to the program, such as news or weather, is displayed. Textoften covers a large portion of the screen.Press the < > buttons to move to ‘Analog Caption’. And the press the <VOL / VOL>buttons to select ‘CC1~4’ or ‘TEXT1~4’.5The options available for Digital Caption are Option, Font Setup and Font Style.62-36 To Configure the SET UP
Using the LCD TVWhen you have finished, press the <MENU> button to close the ‘Menu’ screen.6N󳀏O󳀏T󳀏E ▶Different Channel and Field display different information :Field 2 carries additional information that supplements the information in Field 1.(for example, Channel 1may have subtitles in English, while Channel 2 has subtitles in Spanish.)Using the ParentalThe Parental feature automatically locks out programming that is deemed inappropriatefor children. The user must enter a PIN(Personal ID Number) before any of the Parentalrestriction can be changed.N󳀏O󳀏T󳀏E ▶The Parental feature does not work with PC signals.Setting Up Your PIN (Personal ID Number)1Press the <MENU> button on the remote control.2Press the < > button on the remote control to navigate to the ‘SET UP’ menu.3Press the < > button on the remote control to navigate to the ‘Parental’ submenu.2-37To Configure the SET UP
6After entering a valid PIN number, the ‘Parental’ menu screen will appear.Press the < > buttons to select ‘Set Password’.7When you have finished, press the <MENU> button to colse the ‘Menu’ screen.Using the LCD TVN󳀏O󳀏T󳀏E ▶The default PIN number for a new set is ‘1-1-1-1’.5Enter 4-digit PIN number.4Press the < > button. The ‘Enter the Password : ’ screen is displayed.2-38 To Configure the SET UP
Using the LCD TVHow to On/Off the Parental1Press the <MENU> button on the remote control.2Press the < > button on the remote control to navigate to the ‘SET UP’ menu.3Press the < > button on the remote control to navigate to the ‘Parental’ submenu.4Press the < > button. The ‘Enter the Password : ’ screen is displayed.5Enter 4-digit PIN number.6After entering a valid PIN number, the Parental menu is displayed and the ParentalLock will be highlighted.To turn On or Off the Parental feature, press the < > buttons to select ParentalLock On/Off.2-39To Configure the SET UP
Using the LCD TV4Press the < > button. The ‘Enter the Password : ’ screen is displayed.5Enter 4-digit PIN number.6After entering a valid PIN number, the Parental sub menu screen will appear. Press the < > buttons to move to ‘MPAA’ submenu. 7When you have finished, press the <MENU> button to close the ‘Menu’ screen.How to Setup Restriction Using the MPAA1Press the <MENU> button on the remote control.2Press the < > button on the remote control to navigate to the ‘SET UP’ menu.3Press the < > button on the remote control to navigate to the ‘Parental’ submenu.2-40 To Configure the SET UP
7Press the < > buttons to select particular MPAA category.The < > buttons will cycle through the MPAA categories.Using the LCD TV8When you have finished, press the <MENU> button to colse the ‘Menu’ screen.N󳀏O󳀏T󳀏E ▶The Parental will automatically block any category that is ‘More restrictive’. For example, if you block thePG-13 & Above category, then R & Above, NC-17 & Above, and X will be automatically blocked also.G & Above General audience (no restrictions).MPAAPG & Above Parental guidance suggested.PG-13 & Above Parents strongly cautioned.R & Above Restricted. Children under 17 should be accompanied by an adult.NC-17 & Above No Children under age 17.XAdults onlyUnblocked Not rated2-41To Configure the SET UP
Using the LCD TV6After entering a valid PIN number, the Parental sub menu screen will appear.Press the < > button to move to ‘Age Block’.Age BlockGeneral TV-G & Above General audienceChildren TV-Y Young ChildrenTV-Y7 Children 7 and overUnblocked Not ratedTV-PG & Above Parental guidanceTV-14 & Above Viewers 14 and overTV-MA Mature audienceUnbloCked Not rated4Press the < > button. The ‘Enter the Password : ’ screen is displayed.How to Setup Restriction Using the TV Guidelines1Press the <MENU> button on the remote control.2Press the < > button on the remote control to navigate to the ‘SET UP’ menu.3Press the < > button on the remote control to navigate to the ‘Parental’ submenu.5Enter 4-digit PIN number.2-42 To Configure the SET UP
To set the ‘Content Block’.Using the LCD TV9When you have finished, press the <MENU> button to colse the ‘Menu’ screen.107Press the < > buttons to move to one of the six age-based categories in columnand press the < > buttons will cycle through the MPAA categories.For example, if you block TV-Y category, then TV-Y7 will be automatically blocked.Similarly, if you block TV-G & Above category, then all the categories in the ‘young adult’will be blocked (TV-G & Above, TV-PG & Above, TV-14 & Above and TV-MA).8Press the < > button to select ‘content Block’ and press the < > button. The ‘content Block’ submenu screen will appear.Content BlockTV-PG & AboveDialogue (Sexual Suggestive Dialog)TV-PG & AboveLanguage (Adult Language)TV-14 & AboveUnblockedTV-14 & AboveTV-MAUnblockedTV-PG & AboveSex (Sexual Situation) TV-14 & AboveTV-MAUnblockedTV-PG & AboveViolence TV-14 & AboveTV-MAUnblockedTV-Y7F.Violence (Fantasy Violence)Unblocked2-43To Configure the SET UP
Connect the RS-232C input jack to an external control device (such as a computer or an A/Vcontrol system) and control the Monitor’s functions externally.1Connect the serial port of the control device to the RS-232C jack on the Monitor back panel.2RS-232C connection cables are not supplied with the Monitor.3N󳀏O󳀏T󳀏E ▶▶Type of Connector : D-Sub 9-pin MaleNo. Pin Name123456789No ConnectionRXD (Receive data)TXD (Transmit data)DTR (DTE side ready)GNDDSR (DCE side ready)RTS (Ready to send)CTS (Clear to send)No Connection2-44 External Control Device Setup
Using the LCD TVN󳀏O󳀏T󳀏E ▶▶RS-232C Configurations7-Wire Configuration(Standard RS-232C cable)3-Wire Configuration(Not standard)Press the <MENU> button and then use the ▲/▼button to select the SPECIAL menu.1Press the ▶button and then use ▲/▼button to select Set ID.2Press the ▶button and then use ◀/▶button to adjust Set ID to choose the desiredmonitor ID number.• The adjustment range of Set ID is 0 ~ 99.3Set ID- Use this function to specify a monitor ID number.- Refer to ‘Real Data Mapping 1’.Communication Parameters- Baud rate : 9600 bps (UART)- Data length : 8 bits- Parity : None- Stop bit : 1 bit- Communication code : ASCII code2-45External Control Device Setup
Using the LCD TV•Menu doesn’t display on screen when setting the 4, 12, 13, and 26 ~ 32.COMMAND 1PowerInput SelectVolume MuteVolume ControlContrastBrightnessColorTintSharpnessPIP/POP/PBPPIP PositionTrebleBassBalanceColor TemperatureAV and HD H PositionAV and HD V PositionPIP Input SourcekkkkkkkkkkkkkkkkkkCOMMAND 2abefghijknqrstuvwyDATA(Hexadecimal)0 ~ 10 ~ 70 ~ 10 ~ 640 ~ 640 ~ 640 ~ 640 ~ 640 ~ 640 ~ 40 ~ 30 ~ 140 ~ 140 ~ 640 ~ 30 ~ 640 ~ 640 ~ 7Command Reference List2-46 External Control Device Setup
Using the LCD TVN󳀏O󳀏T󳀏E ▶▶Transmission / Receiving ProtocolTransmission[Command1][Command2][ ][Set ID][ ][Data][Cr][Command 1] : k,[Command 2] : To control LCD set.[Set ID] : You can adjust the Set ID to choose desired monitor ID number in Special menu. Adjustmentrange is 0 ~ 99. When selecting Set ID ‘0’, every connected LCD set is controlled. Set ID is indicated as decimal (0~99) on menu and as Hexadecimal (0x0~0x63) ontransmission/receiving protocol.[DATA] : To transmit command data.Transmit ‘FF’ data to read status of command.[Cr] : Carriage Return ASCII code ‘0x0D’[ ] : ASCII code ‘space (0x20)’▶▶OK Acknowledgement[Command2][ ][Set ID][ ][OK][Data][x]The Monitor transmits ACK (acknowledgement) based on this format when receiving normal data. At thistime, if the data is data read mode, it indicates present status data. If the data is data write mode, it returnsthe data of the PC computer.▶▶Error Acknowledgement[Command2][ ][Set ID][ ][NG][x]The Monitor transmits ACK (acknowledgement) based on this format when receiving abnormal data fromnon-viable functions or communication errors.Data 1 : Illegal Code2 : Not supported function3 : Wait more timePower (Command2 : a)●To control Power On/Off of the Monitor.- Transmission[k][a][ ][Set ID][ ][Data][Cr]Data 0 : Power Off 1 : Power On- Acknowledgement[a][ ][Set ID][ ][OK][Data][x]2-47External Control Device Setup
Using the LCD TV●To show Power On/Off.- Transmission[k][a][ ][Set ID][ ][FF][Cr]Data 0 : Power Off 1 : Power On- Acknowledgement[a][ ][Set ID][ ][OK][Data][x]In a like manner, if other functions transmit ‘FF’ data based on this format,Acknowledgement data feedback presents status about each function.Input Select (Command2 : b) (Main Picture Input)●To select input source for the Monitor. You can also select an input source using theINPUTSELECT button on the Monitor’s remote control.- Transmission[k][b][ ][Set ID][ ][Data][Cr]Data 0 : TV 1 : AV1 2 : AV23 : AV3 4 : COMPONENT6 : RGB 7 : DVI- Acknowledgement[b][ ][Set ID][ ][OK][Data][x]Volume Mute (Command2 : e)●To control volume mute on/off. You can also adjust mute using the MUTE button onremote control.- Transmission[k][e][ ][Set ID][ ][Data][Cr]Data 0 : Volume mute on (Volume off)1 : Volume mute off (Volume on)- Acknowledgement[e][ ][Set ID][ ][OK][Data][x]2-48 External Control Device Setup
Using the LCD TVVolume Control (Command2 : f)●To adjust volume. You can also adjust volume with the volume buttons on remote control.- Transmission[k][f][ ][Set ID][ ][Data][Cr]Data Min : 0 ~ Max : 64Refer to ‘Real data mapping1’ as shown below.- Acknowledgement[f][ ][Set ID][ ][OK][Data][x]Contrast (Command2 : g)●To adjust screen contrast. You can also adjust contrast in the Video menu.- Transmission[k][g][ ][Set ID][ ][Data][Cr]Data Min : 0 ~ Max : 64Refer to ‘Real data mapping1’ as shown below.- Acknowledgement[g][ ][Set ID][ ][OK][Data][x]Real data mapping 1 0 : Step 0⋯A : Step 10 (SET ID 10)⋯F : Step 15 (SET ID 15)10 : Step 16 (SET ID 16)⋯64 : Step 100Brightness (Command2 : h)●To adjust screen brightness. You can also adjust brightness in the Video menu.- Transmission[k][h][ ][Set ID][ ][Data][Cr]Data Min : 0 ~ Max : 64Refer to ‘Real data mapping 1’.- Acknowledgement[h][ ][Set ID][ ][OK][Data][x]2-49External Control Device Setup
Using the LCD TVColor (Command2 : i)●To adjust the screen color. You can also adjust color in the Video menu.- Transmission[k][i][ ][Set ID][ ][Data][Cr]Data Min : 0 ~ Max : 64Refer to ‘Real data mapping 1’.- Acknowledgement[i][ ][Set ID][ ][OK][Data][x]Tint (Command2 : j)●To adjust the screen tint. You can also adjust tint in the Video menu.- Transmission[k][j][ ][Set ID][ ][Data][Cr]Data Red : 0 ~ Green : 64Refer to ‘Real data mapping 1’.- Acknowledgement[j][ ][Set ID][ ][OK][Data][x]Sharpness (Command2 : k)●To adjust the screen sharpness. You can also adjust sharpness in the Video menu.- Transmission[k][k][ ][Set ID][ ][Data][Cr]Data Min: 0 ~ Max: 64Refer to ‘Real data mapping 1’.- Acknowledgement[k][ ][Set ID][ ][OK][Data][x]2-50 External Control Device Setup
Using the LCD TVPIP/POP/PBP (Command2 : n)●To control the PIP (Picture-in-Picture) or Twin Picture. You can also control thePIP/Twin picture mode using the PIP or TWIN PICTURE button on the remotecontrol or in the Twin menu.- Transmission[k][n][ ][Set ID][ ][Data][Cr]Data 0 : PIP OFF 1 : PIP2 : POP 3 : PBP1 4 : PBP2- Acknowledgement[n][ ][Set ID][ ][OK][Data][x]PIP Position (Command2 : q)●To select sub picture position for PIP. You can also adjust the sub picture position usingWin.position on the remote control or in the Twin menu.- Transmission[k][q][ ][Set ID][ ][Data][Cr]Data 0: Right down on screen1: Left down on screen2: Left up on screen3: Right up on screen- Acknowledgement[q][ ][Set ID][ ][OK][Data][x]Treble (Command2 : r)●To adjust treble. You can also adjust treble in the Audio menu.- Transmission[k][r][ ][Set ID][ ][Data][Cr]Data Min: 0 ~ Max: 64Refer to ‘Real data mapping 1’.- Acknowledgement[r][ ][Set ID][ ][OK][Data][x](Operates only when SSM is set to USER.)2-51External Control Device Setup
Using the LCD TVBass (Command2 : s)●To adjust bass. You can also adjust bass in the Audio menu.- Transmission[k][s][ ][Set ID][ ][Data][Cr]Data Min: 0 ~ Max: 64Refer to ‘Real data mapping 1’.- Acknowledgement[s][ ][Set ID][ ][OK][Data][x](Operates only when SSM is set to USER.)Balance (Command2 : t)●To adjust balance. You can also adjust balance in the Audio menu.- Transmission[k][t][ ][Set ID][ ][Data][Cr]Data Min: 0 ~ Max: 64Refer to ‘Real data mapping 1’.- Acknowledgement[t][ ][Set ID][ ][OK][Data][x]Color Temperature (Command2 : u)●To adjust color temperature. You can also adjust CSM in the PC menu.- Transmission[k][u][ ][Set ID][ ][Data][Cr]Data 0: Normal 1: Cool 2: Warm 3: User- Acknowledgement[u][ ][Set ID][ ][OK][Data][x]2-52 External Control Device Setup
Using the LCD TVAV and HD H Position (Command2 : v)●To adjust AV and HD mode H Posion- Transmission[k][v][ ][Set ID][ ][Data][Cr]Data 0 ~ 64- Acknowledgement[v][ ][Set ID][ ][OK][Data][x]AV and HD V Position (Command2 : w)●To adjust AV and HD mode V Posion- Transmission[k][w][ ][Set ID][ ][Data][Cr]Data 0 ~ 64- Acknowledgement[w][ ][Set ID][ ][OK][Data][x]PIP Input Select (Command2 : y)●To select input source for sub picture in PIP mode.- Transmission[k][y][ ][Set ID][ ][Data][Cr]Data 0 : TV 1 : AV1 2 : AV23 : AV3 4 : COMPONENT6 : RGB 7 : DVI- Acknowledgement[y][ ][Set ID][ ][OK][Data][x]2-53External Control Device Setup

Navigation menu