ATI Electronics SP417 Bluetooth Speaker User Manual

ATI Electronics (Shenzhen) Co. Ltd Bluetooth Speaker

User Manual

What is NOT CoveredDamages or malfuncons not resulng from defects in material or workmanship and damages or malfuncons from other than normal use, including but limited to, repair by unauthorized pares, tampering, modificaon or accidents.Service and ReturnsWhen returning a defecve product (postage pre-paid) for service, the package should include:1. Copy of original bill of sale.2. A detailed wrien descripon of the problem.3. Your return address and telephone number (Dayme).Where to send defecve productsUnited States United Kingdom / Europe AustraliaSakar Internaonal Sakar Internaonal Return faulty device to theAenon: Service Department Aenon: Service Department Refund Counter at the store195 Carter Drive 2D, Siskin Parkway East where the product wasEdison, NJ 08817 4020 Middlemarch Business Park purchased. Coventry, CV3 4SUTechnical SupportFor technical support issues, visit our website at www.vivitar.com. Manuals, soware and FAQ’s are available on line. If you can’t find what you are looking for, e-mail us at support@vivitar.com where one of our technical support team members will help you. US phone: 1-800-592-9541; UK phone: 0800 917 4831; Australia phone: 1800-006-614. Telephone numbers from other countries can be found at: www.vivitar.com.Warranty InformaonThis warranty is non-transferable and is limited only to the original purchaser. The condions of this warranty and supplier's responsibilies under this warranty are as follows:• You must be able to prove the date of original purchase of the unit with a dated receipt.• The warranty is not applicable if the product has been subject to physical abuse, improper installaon, modificaon or repair by an unauthorized third party.• Supplier's responsibility shall be limited to the repair or replacement of the product at its sole discreon.• Specifically exempt from any warranty are limited-life consumable components subject to normal wear and tear such as baeries, decorates and other accessories.• Supplier is not responsible, for failure resulng from accident, abuse, misuse, or any unauthorized repair, or modificaon.• Modificaon and repair of the unit should be done by an authorized and qualified service center or returned to the manufacturer.• This warranty gives you specific legal rights, and you may also have other rights, which vary under local laws.What is CoveredThis warranty covers for the original consumer purchaser only and is not transferable. Products that fail to funcon properly UNDER NORMAL USAGE, due to defects in material or workmanship will be repaired at no charge for parts or labor for a period of one year from the me of purchase.External Audio InputThe VL60011BT has an AUX-IN port which can be used to connect an addional audio source using the 3.5mm Auxiliary Cable. When an audio source is plugged in using the 3.5mm Auxiliary Cable, any music playing on your speaker will pause and music playing from the plugged in audio source will play instead.Note: The VL60011BT supports the A2DP profile which allows stereo music to stream from a Bluetooth phone. The music will pause automacally if a call is incoming, and resume when the call has ended.Using Your Speaker during a Phone CallLast number re-dialingDouble press the Answer buon, the last number you dialed will be redialed.Answering a callPress the Answer buon to answer an incoming call.Reject an Incoming CallPress and hold the Answer buon for two seconds to reject an incoming call.Ending a callPress the Answer buon to end a call.Turning OFF Your SpeakerSlide the ON/OFF Switch to the OFF posion to power down your device.Pairing Your Speaker to a Bluetooth PhoneBefore you use your speaker the first me, you must pair it with a Bluetooth® enabled mobile phone. Pairing is a one me process and required only for the first connecon with the Bluetooth® enabled mobile phone. 1. Keep the VL60011BT within one meter range of a Bluetooth® enabled mobile phone.2. Slide the ON/OFF Switch to the ON posion. The LED indicator light on your speaker will illuminate, flashing red and blue alternately. The device is now in pairing mode.3. Find the Bluetooth® seng of your mobile phone and start the search for Bluetooth® devices. (For further details, please read the operang instrucons of your mobile phone).4. From the list of devices found, select your speaker "Vivitar 60011".5. If required, enter the PIN code "0000" and confirm the entry. Once the pairing process was successful, the VL60011BT will connect to your mobile phone automacally then switch to standby mode.Listening to Music on Your SpeakerPlay/PausePress the Play/Pause buon to get music from your audio source to play or pause.Disconnect the VL60011BT from the power supply as soon as the baery is fully charged, overcharging would reduce the service life of the baery. A charged baery will lose its capacity if it is not used on a regular basis.Important: Ensure that the baery is fully charged if you do not use the device for a long period of me. To avoid a complete discharge of the baery, the VL60011BT should be charged at least once every 6 months.Charging Your SpeakerThe VL60011BT speaker is powered by an internal rechargeable baery. Charge the baery completely before its first use. Read the secon tled "Baery informaon" in this manual before starng the charging process.1. Connect one end of the included USB Charging Cable to your speaker's charging port.2. Connect the other end of the USB Charging Cable to a USB port.3. When your speaker is charging, the red LED indicator light will turn red. The baery will take approximately two hours to fully charge4. When the baery is fully charged, the LED indicator light will turn off. Disconnect the charging cable from your speaker and the outlet. Your speaker is ready to use.NOTES:- Give your speaker a full charge before using for the first me.- When the baery power is low, the indicator light will turn red and start to flash.Turning ON Your SpeakerBefore you can start using your speaker, you must first charge the rechargeable baery. Once charged, slide the ON/OFF switch to the ON posion to power on your speaker.If your speaker completed the pairing process successfully, when the speaker is turned on, it will connect to the phone you last connected to automacally. Please ensure your phone's Bluetooth® funcon is acve.Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by unauthorized modificaons to this equipment. Such modificaons could void the user's authority to operate the equipment. This product is CE cerfied according to the provision of the R&TTE Direcve (99/5/EC). This declares that this product is in compliance with the essenal requirements and other relevant provisions of Direcve 1999/5/EC. Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended for use in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain, Sweden, and United Kingdom and within EFTA in Iceland, Norway and Switzerland.Locaon of Controls① Microphone② ON/OFF③ Indicator LED④ Play / Pause / Answer⑤ Auxiliary Port⑥ Charging PortBaery InformaonThe device is equipped with an integrated lithium-polymer baery. The baery cannot be replaced. Do not aempt to remove the baery from the device since it would damage the device. The full performance of a new baery is not achieved unl aer two or three complete charging-discharging cycles. The baery can be charged and discharged several hundred mes, but it loses its capacity over me.• To avoid damage or malfuncon of the speaker do not drop it from high locaons and/or on to hard surfaces, do not place heavy objects on it.• Keep speaker away from humidity, water and other liquids. If it does get wet, do not operate as this may cause an electrical shock, explosion and damage to the device or to the user.• Do not place or keep this product near heat sources, such as direct sunlight, radiators, stoves or any other apparatus that produces heat. This may cause an explosion, degrade the performance and/or reduce baery life.• Do not modify, repair or disassemble device (especially the baery). Doing so will void the warranty. The baery in this device may present a risk of fire or chemical burns if misused or tampered with.• Use only supplied and manufacturer-approved chargers and unplug this device when not in use for long periods of me or during lightning storms.FCC StatementOperaon is subject to the following two condions:1. This device may not cause harmful interference.2. This device must accept any interference received, including interference that may cause undesired operaon.Note:Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.EC Declaraon of ConformityOperaon is subject to the following two condions:1. This device may not cause harmful interference.2. This device must accept any interference received, including interference that may cause undesired operaon.Vivitar® VL60011BT Bluetooth® SpeakerUser GuideThank you for purchasing the Vivitar® VL60011BT Bluetooth® Speaker. IntroduconWith this speaker, you will enjoy listening to high quality music wirelessly using Bluetooth® technology. Easily connect to any mobile device for both conversaon and music listening. It also pairs with other Bluetooth-enabled devices (Bluetooth V4.1+EDR specificaon and HSP, HFP, A2DP and AVRCP profiles).Specificaons• Bluetooth Specificaon: V3.0+EDR• Operaon Frequency: 2.402-2.48GHz• Supported Profile: HSP, HFP, A2DP, AVRCP• Operaon Range: Up to 33 feet (10 meters) • Talk Time: 5 hours• Play Time: 4 hours• Standby Time: 10 hours• Baery Type: 400mAh, 3.7V, Polymer Lithium Ion Baery• Charge Time: 2 HoursIn the Box• Bluetooth® Speaker• USB Charging Cable• User ManualSafety Precauons• Please read this User Manual carefully and follow all instrucons.AnswerAnswerMicrophoneMicrophoneAuxiliary PortAuxiliary PortPlay / PausePlay / PauseON/OFFON/OFFON/OFFON/OFF②④⑤⑥①③③W320(80×4)×H70mm, 80g书写纸, 单黑双面印刷W320(80×4)×H70mm, 80g书写纸, 单黑双面印刷Q4-RD-07A0订单编号工厂型号版 本单 位客 户客户型号客户品牌工程设计 业务审核物料名称规格/材质描述工程审核物料编码批 准 日 期说明书 77-007-00890VL60011BT_En, W320(80×4Pcs)×H70mm, 80g书写纸单黑双面印刷BK32542016-08-15VL60011BTSP417mm(1 : 1)AVivitar®SakarSO201607025石成伟

Navigation menu