ATI Electronics SP417 Bluetooth Speaker User Manual

ATI Electronics (Shenzhen) Co. Ltd Bluetooth Speaker

User Manual

What is NOT Covered
Damages or malfuncons not resulng from defects in material or workmanship and damages or
malfuncons from other than normal use, including but limited to, repair by unauthorized pares,
tampering, modificaon or accidents.
Service and Returns
When returning a defecve product (postage pre-paid) for service, the package should include:
1. Copy of original bill of sale.
2. A detailed wrien descripon of the problem.
3. Your return address and telephone number (Dayme).
Where to send defecve products
United States United Kingdom / Europe Australia
Sakar Internaonal Sakar Internaonal Return faulty device to the
Aenon: Service Department Aenon: Service Department Refund Counter at the store
195 Carter Drive 2D, Siskin Parkway East where the product was
Edison, NJ 08817 4020 Middlemarch Business Park purchased.
Coventry, CV3 4SU
Technical Support
For technical support issues, visit our website at www.vivitar.com. Manuals, soware and FAQ’s are
available on line. If you can’t find what you are looking for, e-mail us at support@vivitar.com where
one of our technical support team members will help you. US phone: 1-800-592-9541; UK phone:
0800 917 4831; Australia phone: 1800-006-614. Telephone numbers from other countries can be
found at: www.vivitar.com.
Warranty Informaon
This warranty is non-transferable and is limited only to the original purchaser. The condions of this
warranty and supplier's responsibilies under this warranty are as follows:
• You must be able to prove the date of original purchase of the unit with a dated receipt.
• The warranty is not applicable if the product has been subject to physical abuse, improper
installaon, modificaon or repair by an unauthorized third party.
• Supplier's responsibility shall be limited to the repair or replacement of the product at its sole
discreon.
• Specifically exempt from any warranty are limited-life consumable components subject to normal
wear and tear such as baeries, decorates and other accessories.
• Supplier is not responsible, for failure resulng from accident, abuse, misuse, or any unauthorized
repair, or modificaon.
• Modificaon and repair of the unit should be done by an authorized and qualified service center or
returned to the manufacturer.
• This warranty gives you specific legal rights, and you may also have other rights, which vary under
local laws.
What is Covered
This warranty covers for the original consumer purchaser only and is not transferable. Products that
fail to funcon properly UNDER NORMAL USAGE, due to defects in material or workmanship will be
repaired at no charge for parts or labor for a period of one year from the me of purchase.
External Audio Input
The VL60011BT has an AUX-IN port which can be used to
connect an addional audio source using the 3.5mm Auxiliary
Cable. When an audio source is plugged in using the 3.5mm
Auxiliary Cable, any music playing on your speaker will pause
and music playing from the plugged in audio source will play
instead.
Note: The VL60011BT supports the A2DP profile which allows stereo music to
stream from a Bluetooth phone. The music will pause automacally if a call is incoming, and
resume when the call has ended.
Using Your Speaker during a Phone Call
Last number re-dialing
Double press the Answer buon, the last
number you dialed will be redialed.
Answering a call
Press the Answer buon to answer an
incoming call.
Reject an Incoming Call
Press and hold the Answer buon for two
seconds to reject an incoming call.
Ending a call
Press the Answer buon to end a call.
Turning OFF Your Speaker
Slide the ON/OFF Switch to the OFF posion to power down
your device.
Pairing Your Speaker to a Bluetooth Phone
Before you use your speaker the first me, you must pair it
with a Bluetooth® enabled mobile phone. Pairing is a one
me process and required only for the first connecon with
the Bluetooth® enabled mobile phone.
1. Keep the VL60011BT within one meter range of a Bluetooth® enabled mobile phone.
2. Slide the ON/OFF Switch to the ON posion. The LED indicator light on your speaker will
illuminate, flashing red and blue alternately. The device is now in pairing mode.
3. Find the Bluetooth® seng of your mobile phone and start the search for Bluetooth® devices.
(For further details, please read the operang instrucons of your mobile phone).
4. From the list of devices found, select your speaker "Vivitar 60011".
5. If required, enter the PIN code "0000" and confirm the entry. Once the pairing process was
successful, the VL60011BT will connect to your mobile phone automacally then switch to
standby mode.
Listening to Music on Your Speaker
Play/Pause
Press the Play/Pause buon to get music from your audio source
to play or pause.
Disconnect the VL60011BT from the power supply as soon as the baery is fully charged,
overcharging would reduce the service life of the baery. A charged baery will lose its capacity if
it is not used on a regular basis.
Important: Ensure that the baery is fully charged if you do not use the device for a long period of
me. To avoid a complete discharge of the baery, the VL60011BT should be charged at
least once every 6 months.
Charging Your Speaker
The VL60011BT speaker is powered by an internal rechargeable baery. Charge the baery
completely before its first use. Read the secon tled "Baery informaon" in this manual before
starng the charging process.
1. Connect one end of the included USB Charging Cable to your speaker's charging port.
2. Connect the other end of the USB Charging Cable to a USB port.
3. When your speaker is charging, the red LED indicator light will turn red. The baery will take
approximately two hours to fully charge
4. When the baery is fully charged, the LED indicator light will turn off. Disconnect the charging
cable from your speaker and the outlet. Your speaker is ready to use.
NOTES:
- Give your speaker a full charge before using for the first me.
- When the baery power is low, the indicator light will turn red and start to flash.
Turning ON Your Speaker
Before you can start using your speaker, you must first charge the
rechargeable baery. Once charged, slide the ON/OFF switch to the ON
posion to power on your speaker.
If your speaker completed the pairing process successfully, when the
speaker is turned on, it will connect to the phone you last connected to
automacally. Please ensure your phone's Bluetooth® funcon is acve.
Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV
interference, caused by unauthorized modificaons to this equipment. Such modificaons could
void the user's authority to operate the equipment. This product is CE cerfied according to the
provision of the R&TTE Direcve (99/5/EC). This declares that this product is in compliance with
the essenal requirements and other relevant provisions of Direcve 1999/5/EC. Please note
that this product uses radio frequency bands not harmonized within EU. Within the EU this
product is intended for use in Austria, Belgium, Denmark, Finland, France, Germany, Greece,
Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain, Sweden, and United Kingdom and
within EFTA in Iceland, Norway and Switzerland.
Locaon of Controls
① Microphone
② ON/OFF
③ Indicator LED
④ Play / Pause / Answer
⑤ Auxiliary Port
⑥ Charging Port
Baery Informaon
The device is equipped with an integrated lithium-polymer baery. The baery cannot be replaced. Do
not aempt to remove the baery from the device since it would damage the device. The full
performance of a new baery is not achieved unl aer two or three complete charging-discharging
cycles. The baery can be charged and discharged several hundred mes, but it loses its capacity over
me.
• To avoid damage or malfuncon of the speaker do not drop it from high locaons and/or on to hard
surfaces, do not place heavy objects on it.
• Keep speaker away from humidity, water and other liquids. If it does get wet, do not operate as this
may cause an electrical shock, explosion and damage to the device or to the user.
• Do not place or keep this product near heat sources, such as direct sunlight, radiators, stoves or any
other apparatus that produces heat. This may cause an explosion, degrade the performance and/or
reduce baery life.
• Do not modify, repair or disassemble device (especially the baery). Doing so will void the warranty.
The baery in this device may present a risk of fire or chemical burns if misused or tampered with.
• Use only supplied and manufacturer-approved chargers and unplug this device when not in use for
long periods of me or during lightning storms.
FCC Statement
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operaon.
Note:Any changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
EC Declaraon of Conformity
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operaon.
Vivitar® VL60011BT Bluetooth® Speaker
User Guide
Thank you for purchasing the Vivitar® VL60011BT Bluetooth® Speaker.
Introducon
With this speaker, you will enjoy listening to high quality music wirelessly using Bluetooth®
technology. Easily connect to any mobile device for both conversaon and music listening. It also
pairs with other Bluetooth-enabled devices (Bluetooth V4.1+EDR specificaon and HSP, HFP, A2DP
and AVRCP profiles).
Specificaons
• Bluetooth Specificaon: V3.0+EDR
• Operaon Frequency: 2.402-2.48GHz
• Supported Profile: HSP, HFP, A2DP, AVRCP
• Operaon Range: Up to 33 feet (10 meters)
• Talk Time: 5 hours
• Play Time: 4 hours
• Standby Time: 10 hours
• Baery Type: 400mAh, 3.7V, Polymer Lithium Ion Baery
• Charge Time: 2 Hours
In the Box
• Bluetooth® Speaker
• USB Charging Cable
• User Manual
Safety Precauons
• Please read this User Manual carefully and follow all instrucons.
AnswerAnswer
MicrophoneMicrophone
Auxiliary PortAuxiliary Port
Play / PausePlay / Pause
ON/OFFON/OFF
ON/OFFON/OFF
②
④
⑤
⑥
①③
③
W320(80×4)×H70mm, 80g书写纸, 单黑双面印刷
W320(80×4)×H70mm, 80g书写纸, 单黑双面印刷
Q4-RD-07A0
订单编号
工厂型号
版 本
单 位
客 户
客户型号
客户品牌
工程设计 业务审核
物料名称
规格/材质
描述
工程审核
物料编码
批 准 日 期
说明书 77-007-00890
VL60011BT_En, W320(80×4Pcs)×H70mm, 80g书写纸单黑双面印刷
BK3254
2016-08-15
VL60011BT
SP417
mm(1 : 1)
A
Vivitar®
SakarSO201607025
石成伟

Navigation menu