ATI Electronics SP417 Bluetooth Speaker User Manual
ATI Electronics (Shenzhen) Co. Ltd Bluetooth Speaker
User Manual
W320(80×4)×H70mm, 80g书写纸, 单黑双面印刷 Vivitar® VL60011BT Bluetooth® Speaker User Guide Thank you for purchasing the Vivitar® VL60011BT Bluetooth® Speaker. Introduction With this speaker, you will enjoy listening to high quality music wirelessly using Bluetooth® technology. Easily connect to any mobile device for both conversation and music listening. It also pairs with other Bluetooth-enabled devices (Bluetooth V4.1+EDR specification and HSP, HFP, A2DP and AVRCP profiles). Specifications • To avoid damage or malfunction of the speaker do not drop it from high locations and/or on to hard surfaces, do not place heavy objects on it. • Keep speaker away from humidity, water and other liquids. If it does get wet, do not operate as this may cause an electrical shock, explosion and damage to the device or to the user. • Do not place or keep this product near heat sources, such as direct sunlight, radiators, stoves or any other apparatus that produces heat. This may cause an explosion, degrade the performance and/or reduce battery life. • Do not modify, repair or disassemble device (especially the battery). Doing so will void the warranty. The battery in this device may present a risk of fire or chemical burns if misused or tampered with. • Use only supplied and manufacturer-approved chargers and unplug this device when not in use for long periods of time or during lightning storms. FCC Statement Operation is subject to the following two conditions: • Bluetooth Specification: V3.0+EDR • Operation Frequency: 2.402-2.48GHz • Supported Profile: HSP, HFP, A2DP, AVRCP • Operation Range: Up to 33 feet (10 meters) • Talk Time: 5 hours • Play Time: 4 hours • Standby Time: 10 hours • Battery Type: 400mAh, 3.7V, Polymer Lithium Ion Battery • Charge Time: 2 Hours ④ Play / Pause / Answer Note:Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. ⑥ Charging Port 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. • Bluetooth® Speaker • USB Charging Cable • User Manual Safety Precautions • Please read this User Manual carefully and follow all instructions. ① ⑤ Auxiliary Port Charging Your Speaker ⑥ NOTES: ② ② ON/OFF Important: Ensure that the battery is fully charged if you do not use the device for a long period of time. To avoid a complete discharge of the battery, the VL60011BT should be charged at least once every 6 months. ⑤ ① Microphone ③ Indicator LED Disconnect the VL60011BT from the power supply as soon as the battery is fully charged, overcharging would reduce the service life of the battery. A charged battery will lose its capacity if it is not used on a regular basis. The VL60011BT speaker is powered by an internal rechargeable battery. Charge the battery completely before its first use. Read the section titled "Battery information" in this manual before starting the charging process. 1. Connect one end of the included USB Charging Cable to your speaker's charging port. 2. Connect the other end of the USB Charging Cable to a USB port. 3. When your speaker is charging, the red LED indicator light will turn red. The battery will take approximately two hours to fully charge 4. When the battery is fully charged, the LED indicator light will turn off. Disconnect the charging cable from your speaker and the outlet. Your speaker is ready to use. Location of Controls 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EC Declaration of Conformity Operation is subject to the following two conditions: In the Box Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. This product is CE certified according to the provision of the R&TTE Directive (99/5/EC). This declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended for use in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain, Sweden, and United Kingdom and within EFTA in Iceland, Norway and Switzerland. ④ ③ - Give your speaker a full charge before using for the first time. - When the battery power is low, the indicator light will turn red and start to flash. Battery Information The device is equipped with an integrated lithium-polymer battery. The battery cannot be replaced. Do not attempt to remove the battery from the device since it would damage the device. The full performance of a new battery is not achieved until after two or three complete charging-discharging cycles. The battery can be charged and discharged several hundred times, but it loses its capacity over time. Turning ON Your Speaker Warranty Information What is NOT Covered Before you can start using your speaker, you must first charge the rechargeable battery. Once charged, slide the ON/OFF switch to the ON ON/OFF position to power on your speaker. If your speaker completed the pairing process successfully, when the speaker is turned on, it will connect to the phone you last connected to automatically. Please ensure your phone's Bluetooth® function is active. W320(80×4)×H70mm, 80g书写纸, 单黑双面印刷 Turning OFF Your Speaker Slide the ON/OFF Switch to the OFF position to power down your device. Pairing Your Speaker to a Bluetooth Phone ON/OFF Before you use your speaker the first time, you must pair it with a Bluetooth® enabled mobile phone. Pairing is a one time process and required only for the first connection with the Bluetooth® enabled mobile phone. 1. Keep the VL60011BT within one meter range of a Bluetooth® enabled mobile phone. 2. Slide the ON/OFF Switch to the ON position. The LED indicator light on your speaker will illuminate, flashing red and blue alternately. The device is now in pairing mode. 3. Find the Bluetooth® setting of your mobile phone and start the search for Bluetooth® devices. (For further details, please read the operating instructions of your mobile phone). 4. From the list of devices found, select your speaker "Vivitar 60011". 5. If required, enter the PIN code "0000" and confirm the entry. Once the pairing process was successful, the VL60011BT will connect to your mobile phone automatically then switch to standby mode. Listening to Music on Your Speaker Play/Pause Press the Play/Pause button to get music from your audio source to play or pause. External Audio Input The VL60011BT has an AUX-IN port which can be used to connect an additional audio source using the 3.5mm Auxiliary Cable. When an audio source is plugged in using the 3.5mm Auxiliary Cable, any music playing on your speaker will pause and music playing from the plugged in audio source will play instead. Auxiliary Port Note: The VL60011BT supports the A2DP profile which allows stereo music to stream from a Bluetooth phone. The music will pause automatically if a call is incoming, and resume when the call has ended. Using Your Speaker during a Phone Call Last number re-dialing Double press the Answer button, the last number you dialed will be redialed. Answering a call Press the Answer button to answer an incoming call. Microphone Answer Reject an Incoming Call Press and hold the Answer button for two seconds to reject an incoming call. Play / Pause This warranty is non-transferable and is limited only to the original purchaser. The conditions of this warranty and supplier's responsibilities under this warranty are as follows: • You must be able to prove the date of original purchase of the unit with a dated receipt. • The warranty is not applicable if the product has been subject to physical abuse, improper installation, modification or repair by an unauthorized third party. • Supplier's responsibility shall be limited to the repair or replacement of the product at its sole discretion. • Specifically exempt from any warranty are limited-life consumable components subject to normal wear and tear such as batteries, decorates and other accessories. • Supplier is not responsible, for failure resulting from accident, abuse, misuse, or any unauthorized repair, or modification. • Modification and repair of the unit should be done by an authorized and qualified service center or returned to the manufacturer. • This warranty gives you specific legal rights, and you may also have other rights, which vary under local laws. What is Covered This warranty covers for the original consumer purchaser only and is not transferable. Products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship will be repaired at no charge for parts or labor for a period of one year from the time of purchase. Ending a call Press the Answer button to end a call. 订单编号 SO201607025 客 工厂型号 SP417 客户品牌 Vivitar® 版 本 客户型号 VL60011BT 单 位 mm(1 : 1) 工程设计 石成伟 户 Sakar 说明书 物料名称 规格/材质 描述 业务审核 工程审核 Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modification or accidents. Service and Returns When returning a defective product (postage pre-paid) for service, the package should include: 1. Copy of original bill of sale. 2. A detailed written description of the problem. 3. Your return address and telephone number (Daytime). Where to send defective products United States Sakar International Attention: Service Department 195 Carter Drive Edison, NJ 08817 United Kingdom / Europe Australia Sakar International Return faulty device to the Attention: Service Department Refund Counter at the store 2D, Siskin Parkway East where the product was 4020 Middlemarch Business Park purchased. Coventry, CV3 4SU Technical Support For technical support issues, visit our website at www.vivitar.com. Manuals, software and FAQ’s are available on line. If you can’t find what you are looking for, e-mail us at support@vivitar.com where one of our technical support team members will help you. US phone: 1-800-592-9541; UK phone: 0800 917 4831; Australia phone: 1800-006-614. Telephone numbers from other countries can be found at: www.vivitar.com. 物料编码 77-007-00890 VL60011BT_En, W320(80×4Pcs)×H70mm, 80g书写纸单黑双面印刷 BK3254 批 准 日 期 2016-08-15 Q4-RD-07A0
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2016:08:18 14:33:52+08:00 Creator : Adobe Illustrator CC 2015 (Windows) Modify Date : 2016:08:18 14:34:06+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2016:08:18 14:34:06+08:00 Creator Tool : Adobe Illustrator CC 2015 (Windows) Format : application/pdf Title : 说明书_VL60011BT(SP417)_77-007-00890_SO201607025 Document ID : uuid:984bf5a3-c819-42e3-806b-cac68b59dafc Instance ID : uuid:1fb9dfbe-1bb0-4223-ad35-4dad476a0157 Producer : Adobe PDF library 15.00 Page Count : 1EXIF Metadata provided by EXIF.tools