User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3657333 |
| Application ID | yllJiqsT4qTWum77N8Z0pw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 127.48kB (1593501 bits) |
| Date Submitted | 2017-11-29 00:00:00 |
| Date Available | 2017-11-29 00:00:00 |
| Creation Date | 2017-09-06 10:19:20 |
| Producing Software | Microsoft® Word 2016 |
| Document Lastmod | 2017-11-29 10:11:27 |
| Document Title | AT388 User guide |
| Document Creator | Microsoft® Word 2016 |
| Document Author: | Moon-Cheol Song |
ATID CO., LTD UHF Reader AT388 User guide AT388 Product User guide Moon-Cheol Song 2017-09-04 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 Revision History Version Revised Date Revised Revised Contents Writer Issue Draft MoonCheol Song Reason V0.1 2017-09-04 AT388 User guide Draft Page 2 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 Contents Contents .......................................................................................................................................................................................... 3 Before Beginning, .............................................................................................................................................................. 5 Product Overview .............................................................................................................................................................. 5 Strength of Product .......................................................................................................................................................... 6 H/W Specification .............................................................................................................................................................. 7 Product Composition ....................................................................................................................................................... 9 5.1 Product Composition ....................................................................................................................................... 9 5.2 Composition of Each Product`s Part ...................................................................................................... 10 5.3 Function of Each Button .............................................................................................................................. 14 5.4 Configuration and operation of the Lamp ......................................................................................... 15 5.5 Screen Composition....................................................................................................................................... 16 5.5.1 State Display Section ..................................................................................................................................... 16 5.5.2 Message Output Section ............................................................................................................................. 17 Basic Function of Device ............................................................................................................................................. 17 6.1 Basic Function of Device ............................................................................................................................. 17 6.1.1 Scan Mode ......................................................................................................................................................... 17 6.1.2 Scan configuration Menu ............................................................................................................................ 17 6.1.3 System Configuration .................................................................................................................................... 18 6.2 Power ON and OFF ........................................................................................................................................ 18 6.2.1 Power ON ........................................................................................................................................................... 18 6.2.2 Power OFF .......................................................................................................................................................... 19 6.3 Barcode Data Reading(Barcode Scan) ................................................................................................... 19 6.4 RFID Tag Data Reading(RFID Scan) ........................................................................................................ 20 6.5 Scan Configuration ......................................................................................................................................... 20 6.6 System Configuration .................................................................................................................................... 21 Settings & Changes....................................................................................................................................................... 22 7.1 Scan Configuration ......................................................................................................................................... 22 7.1.1 “1. View data” ................................................................................................................................................... 22 7.1.2 “2. Upload data” .............................................................................................................................................. 22 7.1.3 “3. Erase data” .................................................................................................................................................. 22 AT388 User guide Page 3 AT388 User guide AT388 Product User guide Doc User guide Name 10 Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 7.1.4 “4. Data space” ................................................................................................................................................. 22 7.1.5 “5. Comm & Mode” ....................................................................................................................................... 23 7.1.6 “6. Poweroff Time” .......................................................................................................................................... 23 7.1.7 “7.Network Setup”........................................................................................................................................... 24 7.1.7.1 “1. Show Info” ................................................................................................................................................. 24 7.1.7.2 “2. Host Pairing” ............................................................................................................................................. 24 7.1.7.3 “3. DHCP Mode” ............................................................................................................................................ 25 7.1.7.4 “4. Paired Mode”............................................................................................................................................ 25 7.1.7.5 “5. Manual Setup” ......................................................................................................................................... 26 7.2 System Configuration .................................................................................................................................... 26 7.2.1 “1. Symbol Setup” ........................................................................................................................................... 26 7.2.2 “2. OP Mode” .................................................................................................................................................... 26 7.2.3 “3. Comm & Mode” ....................................................................................................................................... 28 7.2.4 “4. Data Format” .............................................................................................................................................. 29 7.2.5 “5. System Setup” ............................................................................................................................................ 31 7.2.6 “6. Factory Reset” ............................................................................................................................................ 33 7.2.7 “7. Exit” ................................................................................................................................................................. 33 Bluetooth Connection setting ............................................................................................................................... 34 9.1 Windows 7 Environment ............................................................................................................................. 34 9.2 Windows 8 or Windows 10 Environment ............................................................................................ 39 Firmware Update ....................................................................................................................................................... 42 10.1 Preparation for Firmware ............................................................................................................................. 42 10.2 Firmware Update Start ................................................................................................................................. 42 Warranty and Technical Supports ........................................................................................................................... 46 AT388 User guide Page 4 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 1 Before Beginning, The objective of user guide is to pass the basic contents related with AT388`s maintenance and smooth uses. User guide inclusive of text, images, logos, product name may not be distributed, modified, displayed, reproduced (in whole or in part) without the prior written permission of ATID CO.LTD Furthermore, the described contents in this document are subject to change without notice for improving or maintaining the product and we inform the user that some material can be different with the described contents due to the firmware changes of product. Ownership of text, images, logos, product name in user guide is included in writer and some parts of text, images, logos, product name in the user guide were borrowed for user`s understanding at random. if there is a legal restriction such as a copyright law, it will be re-distributed after adjustment 2 Product Overview AT388 is both subminiature barcode and RFID reader which can grasp with just one hand. As the device that meets the basic function for industrial product such as IP65 in water & dust test and 1.2 m drop specification, it can take an active as data collector in the various kinds of part in medicine, stock and product management and logistics shipping/tracking, access control. 1D Barcode, UHF/HF RFID Tag information can be collected by just one AT388 and collected data can transfer to the HOST PC or Smart Phone by using Bluetooth or Wireless LAN through Remote process / real time process / batch process mode. This device is designed to handle the data by the equipment which has the Windows, Android as an operating system. AT388 User guide Page 5 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 3 Strength of Product AT388 is the smallest product among the existing RFID Barcode Scanner-Reader product Its device as durable industrial PDA meets IP65 standard for the dust & water proof and 1.2m drop to concrete. Apply Honeywell N3680 Barcode module, fast and accurate support for Barcode data collection. UHF RFID Tag can be read and written quickly since Impinj R2000 module is installed in the product In case of that HF RFID module is installed, Various HF RFID tag can be read and written. Mode of Remote Process and Batch Process and Real Time Process can work for device It device can be connected with PC and charged up itself through USB Cable. It can be charged up without exclusive adapter through normal smartphone charger Read data through LCD Display can be directly checked. Battery changes is easily available and its device can change the battery in case of battery shortage while using it. Exclusive charging package for only battery charging will be offered (Option: To be Offered in the near future) AT388 User guide Page 6 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 4 H/W Specification Performance Characteristics Processor ARM7 Core Support Operating System Windows(WLAN/BT), Android(BT) Memory 1Mbit (512Kbyte able to use) Display 1.3inch LCD & LED Indicator Weight 270g(without Battery 210g) Operation Temperature -20~40℃ Storage Temperature -30~70℃ Humidity 95% non-condensing Drop specification 1.2M Drop to concrete Dust & Water Proof IP65 Physical Characteristics Audio Buzzer Standard I/O Port Bluetooth 4.0 Notification LED, Buzzer, LCD, vibrator Dimensions(L x W x H) 164 x 50 x 35(54)mm Battery Supply Main Battery 3,200mAH Li-Ion Rechargeable Battery Power Adapter Battery Charger(Option) & DC5V, 2000mA Network Characteristics Wireless LAN 802.11 b/g/n Wireless LAN, Key Emulator Bluetooth Bluetooth 4.1 HID/SPP Barcode Data Processing Device Barcode Engine AT388 User guide 1D Laser Scanner Page 7 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 UHF 900MHz RFID Reader/Writer (Option) Chips set Impinj R2000 Frequency refer to the test report (Support Global Frequency) Reading Range 0M~3M(According to Tag & Environment) Writing Range 0M~1.5M(According to Tag & Environment) Max. RF output Protocol EPC Gen2, ISO/IEC 18000-6C Special Function Anti-Collision AT388 User guide Page 8 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 5 Product Composition 5.1 Product Composition The basic package for AT388 is shown as below < Device Body > AT388 User guide < User Guide >Page 9 AT388 User guide AT388 Product User guide Doc Name 5.2 User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 Composition of Each Product`s Part i. Front Side RFID ANT Communication SCAN Lamp Status Lamp Power Lamp LAMP 충전 램 LCD Display Scan Button (Barcode/RFID) Arrow Button (Left) Arrow Button (Right) Reset Button Power/Selection Button Communication port Change Button Cancel Button SCAN Lamp: blue lamp will be lit in case of reading the barcode and RFID Tag information Communication State Display Lamp: Show the connection state of Bluetooth, Wireless LAN Power Lamp: Show the state-of-charge (Charging : Red, Full Charge : Green) LCD Display: Show the collected data and current state of device Arrow Button(Left/Right): Movement of Operation Menu or Setting Menu Scan Button: Use its button in case of selecting the barcode and RFID Tag AT388 User guide Page 10 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 reading operation Reset Button: Restart the device by force. Communication port change Button: Change and selection the Bluetooth, WLAN Communication port Cancel Button: Exit the Barcode or RFID Scan operation or Movement of previous Menu AT388 User guide Power/Selection Button: Power On/Off or Selection of Menu operation Page 11 AT388 User guide AT388 Product User guide Doc Name User guide i. Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 Right and Left Side of Device RFID Antenna Battery Cover Strap Hole < Left Side > < Right Side > Strap Hole Barcode USB Connector Module RFID Antenna < Top Side > < Bottom Side > RFID Antenna: HF or UHF RFID Antenna are built in the device and, the radio is emitted through RFID Antenna when reading the Tag Battery Cover: Battery can be changed after getting rid of cover Strap Hole: Fix the Neck strap or Hand strap enclosed with the product AT388 User guide Page 12 AT388 User guide AT388 Product User guide Doc Name User guide ii. Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 Top and Bottom Side of Device RFID Antenna: HF or UHF RFID Antenna are built in the device and, the radio is emitted through RFID Antenna when reading the Tag Barcode Module: Barcode scanner is built in the device and 1D barcode module will be selectively applied. Please note that it should be careful to use since it is one of the most important part to read the barcode USB Connector & Waterproof Cover: If the Waterproof Cover opens up, Micro USB connector is located in it. User can charge the device through Cable Please do lock the cover in case of keeping or using the device. Strap Hole: The portability of device can be improved by connecting the Hand Strap or Neck strap with strap hole iii. Back Side of Device RFID ANT Battery Lock Battery Cover Product Label < Back Side > Battery cover: Remove the cover and attach the battery. Battery Lock: Move the battery lock to the UNLOCK position and the battery AT388 User guide Page 13 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 cover will open. Product Label: This product is labeled with the input voltage and other device information and the serial number of the product. 5.3 Function of Each Button Barcode Scan Button RFID Scan Button ◀ Button ▶ Button Reset Button OK/Power Button Communication Change Button < Operating Button > Cancel Button Barcode scan button: Scans the barcode data. RFID Scan Button: Scan RFID data. ◀ Button: Scroll the screen upward or select the previous item. If user press and hold, the setting menu is displayed. ▶ Button: Scroll the screen downward or select the next item. Reset Button: Restart the device. Communication change Button( ): Switch the communication function of Bluetooth, WLAN whenever you press it. Cancel Button( ): In the Settings menu, cancel the current selection and return to the previous step. OK/Power Button( ): Select a specific item or press and hold for more than two second to turn the power on and off. AT388 User guide Page 14 AT388 User guide AT388 Product User guide Doc Name 5.4 User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 Configuration and operation of the Lamp Communication SCAN Lamp Status Lamp Charging Lamp LCD Display < Display screen and Lamp > Communication Status Lamp: Displays the communication method currently in use. Each time the communication switch button is pressed, the three modes of Bluetooth ( ) and WiFi ( ) are switched, and the lamp of each position lights up. Fast blinking: Indicates that it is waiting for connection with host device. Slow blinking: Indicates that the host device is connected to the current communication mode. SCAN Lamp: According to the setting, the blue lamp lights up when recognizing the barcode or RFID information, and when the data is recognized, the blue lamp also lights up to indicate that normal data has been read. AT388 User guide Charging lamp: The red lamp lights up when the unit starts charging. Page 15 AT388 User guide AT388 Product User guide Doc Name Company User guide Moon-Cheol Writer Date Song 2017-09-04 Atid Co., Ltd. Ver. v0.1 Conversely, when the battery is low and needs to be recharged, it blinks. When charging is completed, the blue lamp lights up. 5.5 Screen Composition AT388 shows the various kinds of item through compact LCD such as the current state of device and read data The screen is separated as state display section and message display section Status Display Section 1:00P Message Output 1. View Mode Section 2. Upload Data 3. Erase Data 4. Data Space 5. Comm & Mode 5.5.1 State Display Section Its section shows the present time, battery remains and operating set-up state. Indication of connection mode: Show the Bluetooth connection mode ( ), Wireless Lan connection mode( ). ?, H, S, T : Show the connection state with the Host. Disconnection State(?), HID Mode(H), Serial Mode(S), WLAN (T) : Show the Scanner Mode and show the activated state of Barcode )and RFID ( )through the ICON. ( Bright Condition: ON, Dark Condition: OFF) 10:00P: Show the set time. (There is a possibility to be different with the present time) It can be reset up at the system configuration menu. AT388 User guide Battery State: Show the battery remains as a four level Page 16 AT388 User guide AT388 Product User guide Doc Name User guide Company Moon-Cheol Writer Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 5.5.2 Message Output Section Its section shows the read barcode and RFID Tag information. 6 Basic Function of Device AT388 supports the reading function for basic barcode and RFID without host after turning on the device. Please acquire the basic function in accordance with the below step. 6.1 Basic Function of Device AT388 is basically worked as three kinds of different mode 6.1.1 Scan Mode This is the screen shown at the first when turning on the device and It acts a role in collecting the barcode and RFID data 10:00P Scan Ready 6.1.2 Scan configuration Menu User can adjust the basic setting of device through this menu such as confirmation of read data, memory management, communication mode and setting the time to turn off the device AT388 User guide 1:00P Page 17 AT388 User guide AT388 Product User guide Doc User guide Name Company Moon-Cheol Writer Date Song 2017-09-04 Atid Co., Ltd. Ver. v0.1 1. View Mode 2. Upload Data 3. Erase Data 4. Data Space 6.1.3 System Configuration User can adjust the relation settings with whole function of device, barcode symbol settings, Barcode/RFID operation and communication 1:00P 1. Symbol Setup 2. OP Mode 3. Comm & Mode 4. Data Format 5. System Setup 6.2 Power ON and OFF 6.2.1 Power ON ① Press the Power/Section button for 2 seconds. ② After “Booting…” message is come out at the screen, please move the hand from scan in case of that “Wait…” message is come out. ③ If the “Scan Ready” message is come out as below, device can read the Barcode or RFID Tag data. AT388 User guide 1:00P Page 18 AT388 User guide AT388 Product User guide Doc User guide Name Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 Scan Ready 6.2.2 Power OFF ① Press the Power/Selection button for 2 seconds in the Scan Ready ② Select the “Yes” through either ◀button or ▶button and then, turn off the power by pressing the Power/Selection button ③ If “No” is selected, user can return back to the scan mode Power off continue? Yes 6.3 1:00P No Barcode Data Reading(Barcode Scan) ① Press the Barcode scan button in the Scan Ready ② User can read the barcode after “Scan Ready” message. AT388 User guide 1:00P Page 19 AT388 User guide AT388 Product User guide Doc Company User guide Name Moon-Cheol Writer Song Scan Ready Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 1:00P 183972 < Scan Ready > 6.4 < After Barcode reading > RFID Tag Data Reading(RFID Scan) ① Press the RFID scan button in the Scan Ready ② User can read the RFID tag after “Scan Ready” message. 1:00P Scan Ready < Scan Ready > 6.5 1:00P 3000000000000000000000018 < A f te r R F I D Re a d i n g > Scan Configuration Contents for reading history & operation of Barcode/RFID Tag, Auto Power Off might be changed by the scan configuration Entry for Scan Menu Please refer to the chapter 5. Settings & Changes in regard to detailed information on scan menu. ① Turn on the device AT388 User guide Page 20 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 ② The scan menu will be shown up after pressing the ◀button for a second ③ Select the preferred item by using either ◀button or ▶button and then, press the Scan button to check the detailed information on selected item ④ Press the “Cancel Button” for returning back to Scan mode 6.6 System Configuration It has to be controlled in the system configuration menu for changing the operating direction of device, settings for communication function, settings of barcode symbol and scan mode 6.6.1 Entry for System Configuration ① Turn on the device ② Show the system configuration menu if user press the ◀button and Power button for several seconds. ③ Select the menu by using either ◀button or ▶button and then, enter the configuration menu through scan button ④ User can check the detailed information on selected item through the OK button after selecting the preferred item with either ◀button or ▶ button in the system configuration menu. ⑤ For restarting it to scan mode after completing the whole settings and storing the contents, user has to select the “Save & Exit” after selecting the “8. Exit”. If user selects the “No Save & Exit”, it will be restarted to scan mode without storage of adjusted contents. AT388 User guide Page 21 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 7 Settings & Changes 7.1 Scan Configuration Please refer to the chapter “7. Settings & Changes in regard to detailed information on system configuration menu 7.1.1 “1. View data” View Data shows the stored data located in the internal memory, in case of Batch Process Mode. Check the next or previous item through either ◀button or ▶ button 7.1.2 “2. Upload data” Stored data in the internal memory are transferred to Host`s Bluetooth or WLAN Data of memory will be remained after transferring. 7.1.3 “3. Erase data” Stored data in the internal memory can be wholly deleted If user wants to erase the data, please select “Yes” 7.1.4 “4. Data space” Show the amount of used internal memory 10:00P Data Space 900K bytes(100%) Left 0 records OK AT388 User guide Page 22 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 7.1.5 “5. Comm & Mode” Comm & Mode is set up the communication measures and data transferring way between device and host. “*” is marked at the present settings. 10:00P *Realtime–BTH Realtime–USB Realtime–WLAN Batch–BTH Batch–USB ① Realtime-BTH: Transfer the read data to device connected with Bluetooth in real time. ② Batch-BTH: Transfer the read data to equipment connected with Bluetooth in a lump (Batch Process mode) ③ Remote-BTH: Link with application program. (BTH_SPP only) 7.1.6 “6. Poweroff Time” The time to automatically turn off the device can be selected as 1 minute, 2 minutes, 5 minutes, 10 minutes, 30 minutes, 60 minutes, 120 minutes, None. The device will be automatically turned off itself after designated time. “*” is marked at the present Settings. 10:00P None * 1 minute 2 minutes 5 minutes 10 minutes OK AT388 User guide Page 23 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Date Song 2017-09-04 Atid Co., Ltd. Ver. v0.1 7.1.7 “7.Network Setup” The menus are organized as follows. 7.1.7.1 “1. Show Info” Information (SSID, Password) and MAC Address related to WiFi connection set up in this product are displayed. For detailed WiFi connection information setting, please use the special setting tool provided separately. 7.1.7.2 “2. Host Pairing” When the connection mode is used as Bluetooth or WLAN, it provides a function for pairing with the parent device. ① “1. PIN Code”: Check pin code necessary for pairing. 10:00P PIN code 1234 OK ② “2. WLAN Pairing”: Wa i t i n g fo r p a i r i n g w i t h h o s t d e v i c e ( H O S T ) v i a W i F i , a n d w a i t s fo r c o n n e c t i o n at t h e h o st d e v i c e . 10:00P Wlan Pairing 192.168.0.3 wait for pairing …. OK ③ “3. BT H Pairing”: Wa i t i n g f o r p a i r i n g w i t h h o s t d e v i c e ( H O S T ) via Bluetooth, and waits for connection at the host device. AT388 User guide Page 24 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Date Song 2017-09-04 Atid Co., Ltd. Ver. v0.1 The device identification name required for pairing is d i s p l a y e d to g e t h e r. 10:00P BTH Pairing AT388-67FE wait for pairing …. OK 7.1.7.3 “3. DHCP Mode” 10:00P On Off On: Enable DHCP mode to automatically obtain IP. Off: Disable DHCP Mode and set IP on the device separately. 7.1.7.4 “4. Paired Mode” 10:00P On Off AT388 User guide Page 25 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 On: D o n o t pa i r w i t h a n y d e v i c e o t h e r t h a n t h e l a s t d e v i c e t h a t w a s c u r r e n t l y p a i re d . Off: Allow any device to pair. 7.1.7.5 “5. Manual Setup” Switch to the mode to receive wireless LAN connection information and IP information from the PC's dedicated setting program. Please refer to the separately distributed manual for setting program for PC. 10:00P Manual Setup Wait for Connection… OK 7.2 System Configuration 7.2.1 “1. Symbol Setup” User can choose to read the barcode symbol or not. The item that can be set will be changed in accordance with the type and supportive function of module. The “*” is marked at the Enable item. 7.2.2 “2. OP Mode” Set up the operating mode of RFID and Barcode Reader and basic function of RFID Module AT388 User guide Page 26 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 “1. READER”: Set up the barcode and RFID operating mode 1:00P BARCODE * UHF RFID BARCODE–RFID BARCODE+RFID “BARCODE“: Set up the exclusive barcode mode and, read the only barcode when user pushes the scan button “UHF RFID”: Set up the exclusive RFID mode, read the only UHF RFID Tag when user pushes the scan button. “BARCORDE–RFID”: Set up either barcode mode or RFID mode at the scan ready. “BARCORDE+RFID”: Set up the both barcode mode and RFID mode “2. Report Mode”: Set up the tag Reading Mode of RFID among Multi Tag / Single Tag / Multi Repeat 1:00P * MULTI SINGLE Multi Repeat “MULTI”: Set up Multi Tag Reading mode to read all the nearby tags. “SINGLE”: Set up Single Tag mode to read only one Tag data. “Multi Repeat”: Set up Multi Repeat mode to read all the tags nearby but does not read same tags twice. AT388 User guide Page 27 AT388 User guide AT388 Product User guide Doc Name User guide 7.2.3 Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 “3. Comm & Mode” AT388 can connect with host through Bluetooth and WLAN. Bluetooth supports the different kinds of protocol 1:00P 1. BTH Protocol 2. USB Protocol 3. Com Mode 1. BTH Protocol: Select the communication protocol to be used when connecting with Bluetooth BTH HID: It will connect through Human Interface Device and the data to be transferred will be inputted in accordance with the contents typed through Keyboard at the place where the cursor is located. User has to require more attention for using this mode since between the data where the cursor is located and actual reading data can be differently shown up with the keyboard language settings of host. BTH SPP: It will connect through serial port profile and the data to be transferred will be transferred to serial port (COM port) of host. The host has to make the separate program for utilizing the transferred data. AT388 User guide Page 28 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 3. Com Mode Set up the data transferring mode and communication protocol between AT388 and host. “*” is marked in selected item. 1:00P *Realtime–BTH Realtime–USB Realtime–WLAN Batch–BTH Batch–USB Batch–WLAN Remote–BTH Int Realtime-BTH: The read data will be transferred to the equipment that connects with its device through Bluetooth in real time Batch-BTH: The read data will be transferred to the equipment that connects with its device through Bluetooth (Batch Process mode) 7.2.4 Remote-BTH: Link with application program. (BTH_SPP only) “4. Data Format” The contents of this menu are explained on the basis of a situation that device can read the barcode. The operation can be different when reading the RFID Tag 1:00P 1. Barcode Record 2. Time format 3. Quantity 4. Numbering 5. Terminator 6. UHF Report “1. Barcode Record”: After reading the barcode, user can decide to use the barcode AT388 User guide Page 29 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 type ID or time to be appended when storing or transferring the data “*” is marked in selected item. 1:00P * Barcode Only ID+Barcode Time+Barcode Time+ID+Barcode Barcode Only: The only reads barcode data will be stored or transferred ID+Barcode: ID of barcode and read barcode data will be stored or transferred Time+Barcode: Time data and read barcode will be stored or transferred Time+ID+BarcodeMode: Time data, ID of barcode and read barcode data will be stored or transferred. “2. Time format”: In case of that the time will be stored or transferred with the read barcode, user can set up the time format “*” is marked in selected item 1:00P Year *Month & Date *Hour & Minute Year: Choose to use the year data or not at the time data (YYYY) Month & Date: Choose to use Month & Date or not at the time data(MMDD) AT388 User guide Page 30 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 Hour & Minute: Choose to use Hour & Minute or not at the time data(HHMM) “3. Quantity”: Choose to input tag quantity. Quantity settings can be operated in the only barcode mode and its settings might be possible after reading the barcode tag. User can get AT388 to input quantity from 1 to 9999 and it cannot read another tag before inputting applicable tag quantity. “*” is marked in default settings “4. Numbering”: Store or transfer the data index when reading the barcode and RFID tag. If the memory is vacated, it will be started from 1 “5. Terminator”: Select which letter will be attached at the end of data among LF, CR, CR&LF, Tab, Space, Semicolon when transferring the data via host “6. UHF Report” (UHF Only): Select whether only EPC data is sent or both the EPC data and PC data is sent when transferring the UHF RFID Tag Data 7.2.5 “5. System Setup” Set up to use the time, sound, vibrator, LCD and etc are needed or not 10:00P 1. Clock Setting 2. Poweroff Time 3. Disp.off Time 4. HID Language 5. Notification 10:00P 6. BT HIDMode 7. F/W Version “1. Clock Setting”: Set up the current time. Designated time can be used with RFID tag information and barcode. ★ Please do set up the time in regularly since time error can be occurred “2. Poweroff Time”: Select the time to automatically turn off the power when not in use. User can select the time among 1 minute, 2 minutes, 5 minutes, 10 minutes, AT388 User guide Page 31 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 30 minutes, 60 minutes, 120 minutes and None. The device will be automatically turned off the its power after the designated time from LCD power off. “*” is marked in default settings 10:00P None * 1 minute 2 minutes 5 minutes 10 minutes “3. Disp,off Time”: Set up the time to turn off the LCD for saving battery and LCD will be automatically turned off in accordance with the designated time 10:00P None * 1 minute 3 minutes 5 minutes “4. HID Language”: Set up the language type in case of HID mode. User can select the preferred one among the UNIVER-SAL, FRENCH, UK, US “5. Notification”: Set up the operation when pressing the button or placing the Alert situation 1. Button notify Set up whether beep, vibrate, light is being operated when pressing the button. 2. Alert notify Set up whether beep, vibrate, light is being operated when placing the Alert situation such as connection success/failure with remote or booting up. The time to operate can be different in accordance with situation 3. Button mode Select the holding time of Button notify among None, Short, Long. In case of AT388 User guide Page 32 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 None settings, there is no reaction, but in case of Short settings, it will operate for 0.3 seconds. In case of Long settings, it will operate until user detaches the button “6. BT HID Mode”: Set up the Bluetooth HID data speed to High or Low speed. High Speed Set up the Bluetooth HID data speed to High speed. Low Speed Set up the Bluetooth HID data speed to Low speed. “7. F/W Version”: Show the installed firmware version. User cannot change the firmware for changing the basic function and improvement of device. Please make an inquiry on the firmware to manufacturer or distributor. 7.2.6 “6. Factory Reset” Return all settings to default 7.2.7 “7. Exit” Terminate the system configuration and saving operation. AT388 User guide Page 33 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 8 Bluetooth Connection setting To transmit / receive data using this product with Bluetooth, you need a PC with built-in Bluetooth function or a dedicated Bluetooth dongle. ※ Please check with your PC vendor or product installer for details on Bluetooth function. ※ This chapter assumes that the Bluetooth driver is installed normally. ※ Please contact the distributor or the manufacturer who purchased the product for any problems during use or installation. ※ If the Bluetooth driver does not install properly, or if you use a special driver that is supported separately by Windows 7 and 8 or 10 OS, this manual and the contents may not match. 8.1 Windows 7 Environment ① Turn on the AT388 and set it to 7. Network Setup -> 2. Host Paring -> 3. BTH Pairing. ② In Windows, select Start -> Control Panel -> Hardware and Sound -> Devices and Printers -> "Add Bluetooth Device". AT388 User guide Page 34 AT388 User guide AT388 Product User guide Doc Name User guide ③ Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 The Bluetooth device will be detected automatically, select the AT388 you want to connect to, then press N (Next) to proceed with device addition. ④ When the confirmation window for the connection code is displayed, press N to continue. The connection code does not need to be changed specially. AT388 User guide Page 35 AT388 User guide AT388 Product User guide Doc Name User guide ⑤ Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 After a while, Windows7 will automatically detect the driver and proceed with the installation, and the screen will display the message Completion of device addition. ⑥ Double-click on the newly added AT388 in Control Panel -> Devices and Printers to display its properties, then go to the "Services" tab. AT388 User guide Page 36 AT388 User guide AT388 Product User guide Doc Name User guide ⑦ Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 After checking all the two services that appear in the Bluetooth service, click the OK button to finish adding the service and adding the Bluetooth device. AT388 User guide Page 37 AT388 User guide AT388 Product User guide Doc Name User guide ⑧ Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 After that, exit the setting menu of AT388 and set it to the desired operation mode. AT388 User guide Page 38 AT388 User guide AT388 Product User guide Doc User guide Name 8.2 Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 Windows 8 or Windows 10 Environment Windows 8 and Windows 10 are similar to the basic user interface, so the contents are based on Windows 8. ① Turn on the AT388 and set it to 7. Network Setup -> 2. Host Paring -> 3. BTH Pairing. ② In Windows, select Start -> PC Settings -> PC and Devices -> Bluetooth. -> < Select settings at Start> ③ < Select Bluetooth on your PC and device> If Bluetooth is off, if you change Bluetooth to on, the AT388 is automatically detected and displayed. ※ The AT388 name may take a while to appear. ④ AT388 User guide After confirming that the displayed contents of the AT388 matches the Page 39 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 AT388's LCD screen, click the "Connect" button on the corresponding device. ⑤ When the device connection is established for the first time, the password (PIN code) with AT388 will be set automatically, and if confirmation screen is displayed, click "Yes". ※ The password is set automatically, so there is no need to change it. ⑥ ※ The driver will be installed automatically when "Connect" is done. It may take a few minutes to install the driver. ⑦ AT388 User guide After the driver installation is complete, the message "Paired" is Page 40 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 displayed when the device is successfully added. ⑧ After that, exit the setting menu of AT388 and set it to the desired operation mode, then use it. AT388 User guide Page 41 AT388 User guide AT388 Product User guide Doc User guide Name Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 9 Firmware Update Firmware for AT388 can be updated for improvement of its device. If user does not have a proper knowledge on software and hardware, please ask distributor or manufacturer to handle the issue since the recovery of device cannot be possible, in case of that the problem comes up in doing update. 9.1 Preparation for Firmware Computer with over Windows 7 OS 1 piece of USB 2.0 Port AT388 product Micro USB Cable (with Device sold) Firmware File( .bin) Firmware Updater Application (SetupUpdater.msi, it will be supplied from manufacturer or distributor) 9.2 Firmware Update Start AT388 User guide ① Install the SetupUpdater.msi into the PC (With Double-click) ② Save the Firmware File to specific folder ③ Execute the Firmware Update Program(fwupdate.exe) Page 42 AT388 User guide AT388 Product User guide Doc Name User guide ④ Company Writer Moon-Cheol Date Song 2017-09-04 Atid Co., Ltd. Ver. v0.1 Click the “Load Binary File” button and then, select the stored Firmware File in the specific folder ⑤ Connect AT388 with PC through USB cable ⑥ Enter the the Firmware Download Mode in AT388`s configuration menu. 5. 7. 8. AT388 User guide 10:00P System Setup Factory Reset Exit Download FW Page 43 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Date Song 2017-09-04 Atid Co., Ltd. Ver. v0.1 10:00P Download ap wait for Connection . . . OK ⑦ Click “select comport” in the Updater and select the assigned COM port ⑧ “Online” will be appeared when clicking “off line” and Firmware version will be displayed as well. AT388 User guide Page 44 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 ⑨ Start the download for Firmware by clicking the download button ⑩ After completion of download, new firmware will be automatically restarted AT388 User guide Page 45 AT388 User guide AT388 Product User guide Doc Name User guide Company Writer Moon-Cheol Song Date 2017-09-04 Atid Co., Ltd. Ver. v0.1 10 Warranty and Technical Supports All of ATID products have one-year warranty from date of manufacture However, there is a principle in ATID that the customer will be charged for the repairs, in case of the damage caused by customer even if it is under warranty period We recommend requesting the warranty and technical support for AT388 through distributor. ATID Co., Ltd. #1211 Byuksan/Gyungin Digitial Valley II, #481-10 Gasan-Dong Gumchon-Gu, Seoul, Korea TEL: +82-2-544-1436 FAX: +82-2-2113-0040 Homepage: http://www.atid1.com E-mail: atid@atid1.com , webmaster@atid1.com English: +82-70-8677-8589 Chinese: +82-70-8677-8669 Japanese: +82-70-8677-8594 Korean: +82-70-8677-8594 AT388 User guide Page 46 Caution: Use the Product in the environment with the temperature Between -20℃ and 40℃; Otherwise, it may damage your product. It can be Operating under 2000m。 For the following equipment: Product Name: UHF Reader Model: AT388 Brand Name: ATID ATID CO., LTD E-mail: djlee@atid1.com hereby declares that this [Name: UHF Reader, Model: AT388] is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The product shall only be connected to a USB interface of version USB2.0 or higher, and that the connection to a power USB is allowed. Adapter shall be installed near the equipment and shall be easily accessible. Only can use deceive with Output: 5.0V 2A which comply with CE for charging The RF distance between body and Mobile Phone is 0mm This product is intended for sale and application in a business environment. RED Article 10 Manufacturers shall ensure that radio equipment shall be so constructed that it can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum. -This product can be used across EU member states 10 In cases of restrictions on putting into service or of requirements for authorisation of use, information available on the packaging shall allow the identification of the Member States or the geographical area within a Member State where restrictions on putting into service or requirements for authorisation of use exist. Such information shall be completed in the instructions accompanying the radio equipment. The Commission may adopt implementing acts specifying how to present that information. Those implementing acts shall be adopted in accordance with the advisory procedure referred to in Article 45(2). -The product is class 1 product, No restrictions Technical Characteristics of EUT Bluetooth Version: Bluetooth V4.1 (Only EDR) Frequency Range: 2402-2480MHz RF Output Power: 9.42dBm (EIRP) Type of Modulation: GFSK, Pi/4 DQPSK, 8DPSK Data Rate: 1Mbps, 2Mbps, 3Mbps Quantity of Channels: 79 Channel Separation: 1MHz Type of Antenna: Integral Antenna Antenna Gain: 0dBi Wi-Fi Support Standards: 802.11b, 802.11g, 802.11n-HT20 Frequency Range: 2412-2472MHz for 802.11b/g/n(HT20) Max.RF Output Power: 9.81dBm (EIRP) Type of Modulation: CCK, OFDM, QPSK, BPSK, 16QAM, 64QAM Data Rate: 1-11Mbps, 6-54Mbps, up to 150Mbps Quantity of Channels 13 for 802.11b/g/n(HT20) Channel Separation: 5MHz Type of Antenna: Integral Antenna Antenna Gain: 2.2dBi RFID Frequency Range: 865.7-867.5MHz RF Output Power: 26.47dBm (ERP) Modulation: ASK Quantity of Channels: Channel Separation: 600kHz Antenna Type: Integral Antenna Antenna Gain: 1dBi FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This device has also been tested against this SAR limit. SAR information on this and other pad can be viewed on‐line at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested simulation typical 0mm wear on hand. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Author : Moon-Cheol Song Create Date : 2017:09:06 10:19:20+09:00 Modify Date : 2017:11:29 10:11:27+08:00 Subject : AT388 Product User guide Language : ko-KR Tagged PDF : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Microsoft® Word 2016 Format : application/pdf Title : AT388 User guide Creator : Moon-Cheol Song Description : AT388 Product User guide Creator Tool : Microsoft® Word 2016 Metadata Date : 2017:11:29 10:11:27+08:00 Document ID : uuid:2AB91168-26D1-486A-ABB9-36AADE4A95D6 Instance ID : uuid:dec1eb7e-374b-4df5-b68e-26a6c9d79632 Page Count : 49EXIF Metadata provided by EXIF.tools