ATID ATUHF900S1 UHF RFID MODULE User Manual User s Manual r1

Download:
Mirror Download [FCC.gov]
Document ID	1858272
Application ID	vcZBhYUdM2h/FB2Pj6i1uA==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.44kB (280515 bits)
Date Submitted	2012-12-13 00:00:00
Date Available	2013-06-11 00:00:00
Creation Date	2012-12-11 16:00:40
Producing Software	Acrobat Distiller 9.2.0 (Windows)
Document Lastmod	2012-12-11 16:00:40
Document Title	Microsoft Word - User's Manual-r1
Document Creator	PScript5.dll Version 5.2.2
Document Author:	C0CCBFF8C1A4

AT-UHF900-S1
USER’S MANUAL
V2.06.21
June 2012
This module is limited to OEM Installation only.
AT-UHF900-S1 User’s Manual

Company
Date
Version
ATID Co.,Ltd
2012-06-21
V2.06.21
Revision history
Version
Revision Date
V1.8.17
2010-08-17
V1.10.18
2011-10-18
V2.06.21
2012-06-21
Revision Page
Revision Description
Draft
Add reset pin of Pin-map
Identification with Radio and Optical
AT-UHF900-S1 User’s Manual
Company
Date
Version
ATID Co.,Ltd
2012-06-21
V2.06.21
Contents
1.
Introduction & System composition diagram ..........................................................4
 Introduction ................................................................................................................................................. 4
 System composition diagram ............................................................................................................ 4
2.
Composition parts ..........................................................................................................5
3.
Reader Description .........................................................................................................6
4.
Reader Specification .......................................................................................................8
 Interface ......................................................................................................................................................... 8
 Physical Dimension .................................................................................................................................. 8
 Mechanical Dimension ........................................................................................................................... 8

Appendix I : FCC Certification Requirements............................................................9
Identification with Radio and Optical
AT-UHF900-S1 User’s Manual
Company
Date
Version
ATID Co.,Ltd
2012-06-21
V2.06.21
1. Introduction & System composition diagram
 Introduction
The AT-UHF900-S1 is a compact size RFID reader module developed
for the embedded reader market, which comprises printers, industrial
PDA, and similar devices.
It provides customers with compact size,
low cost, high performance functions. It supports protocols of
ISO18000-6C(EPC C1G2), ISO18000-6B, and it interfaces with a host
system via UART.
- Target Application
PDA type RFID Reader
RFID Printers / Tag Encoders
USB Readers
Smart-Shelves
 System composition diagram
Identification with Radio and Optical
AT-UHF900-S1 User’s Manual
Company
Date
Version
ATID Co.,Ltd
2012-06-21
V2.06.21
2. Composition parts
RFID Reader module
Interface Cable
ANTENNA
(option)
UART to USB Convertor
(option)
Reader Software &
User Document CD-ROM
Identification with Radio and Optical
AT-UHF900-S1 User’s Manual
Company
Date
Version
ATID Co.,Ltd
2012-06-21
V2.06.21
3. Reader Description
LED Status
DATA LED : The Red LED will twinkle when
POWER LED : The Red LED is turned on
the reader is receiving data from a tag.
when the reader is powered. It can be
removed for prevent battery consume.
ANT Port
ANT Port : Connect RF Cable
to reader module and ANT
Interface connector :
Supply voltage and interface with a host
system(PC, PDA…) via UART.
Identification with Radio and Optical
AT-UHF900-S1 User’s Manual
Company
Date
Version
ATID Co.,Ltd
2012-06-21
V2.06.21
Interface Pin-map
①
⑫
VCC (3.8 ~ 4.2V, typ 4V)
VCC (3.8 ~ 4.2V, typ 4V)
GND
TXD (AT-UHF900-S1 HOST)
RXD (AT-UHF900-S1  HOST)
Not Used
Not Used
Not Used
Not Used
10
Not Used
11
GND
12
RESET
(It is necessary for Firmware update)
Identification with Radio and Optical
AT--UHF900
0-S1 Usser’s Maanual
Company
Date
Version
ATID
Co.,Ltd
2012-06-21
V2.06.21
4. Reade
er Specificatio
on
 Interfacce
Host connector
Part No. : 12505WR--12
Man
nufacturer : Yeonho Eleectronics
ANT Connector
Part No
o. : CMJ-S00
Manufactu
urer : Giga LLane
 Physical Dimenssion
SIZE
33mm × 39mm × 7.5mm
Weight
20g
 Mechan
nical Dim
mension
Identification
n with Radio and Optical
AT-UHF900-S1 User’s Manual
Company
Date
Version
ATID Co.,Ltd
2012-06-21
V2.06.21
Appendix I : FCC Certification Requirements
1. Caution
Any changed or modifications not expressly approved by the party responsible for compliance
could void the user`s authority to operate this equipment.
2. OEM installation guide
I.
OEM integrators must be instructed to ensure that the end-user has no manual
instructions to remove or install the module.
II.
This module is to be installed only in mobile of fixed devices.
▪ Mobile device: The devices is to be generally used in such a way that a separation
distance of at least 20cm is normally maintained between the transmitter`s radiating
structures and the body of the user or nearby persons.
▪ Fixed devices: The device is physically secured at one location and is not able to
be easily moved to another location.
III.
To ensure compliance with all non-transmitter functions the host manufacturer is
responsible for ensuring compliance with the module(s) installed and fully operational.
IV.
To satisfy FCC exterior labeling requirements, the following text must be placed on
exterior of the end product.
V.
An additional permanent label referring to the enclosed module: “Contains Transmitter
Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1” must be used. The
host OEM user manual must also contain clear instructions on how end users can find
and/or access the module and the FCC ID.
3. FCC RF exposure requirements
The antenna used with this module must be installed to provide a separation distance of at
least 20cm from all persons, and must not transmit simultaneously with any other antenna or
transmitter except in accordance with FCC multi-transmitter product procedures.
4. FCC authorization for this module
If this module is installed in portable devices or the different antenna configurations are used,
the FCC authorizations are no longer considered valid and FCCID for module cannot be used
on the final product. And the OEM installer will be responsible for re-evaluating the final
product including this module and obtaining separate FCC authorization.
Identification with Radio and Optical
AT-UHF900-S1 User’s Manual
Company
Date
Version
ATID Co.,Ltd
2012-06-21
V2.06.21
5. Information for importation of radio frequency devices in to the
United States.
To ensure compliance with all non-transmitter functions the host manufacturer is responsible for
ensuring compliance with the module(s) installed and fully operational. For example, if a host
was previously authorized as an unintentional radiator under the Declaration of Conformity
procedure without a transmitter certified module and a module is added, the host manufacturer is
responsible for ensuring that the after the module is installed and operational the host continues
to be compliant with the Part 15B unintentional radiator requirements.
Please see CFR47 Part 2 Subpart J Equipment Authorization Procedures, KDB784748 D01 v07, and
KDB 997198.
6. User Information
This device complies with Part 15 of the FCC`s Rule. Operation is subject to the following
to conditions;
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesirable operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
10
Identification with Radio and Optical

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 
Create Date                     : 2012:12:11 16:00:40+09:00
Modify Date                     : 2012:12:11 16:00:40+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - User's Manual-r1
Creator                         : 
Producer                        : Acrobat Distiller 9.2.0 (Windows)
Document ID                     : uuid:62ede2a7-0263-4caa-b3e4-85f7d0c5d1e3
Instance ID                     : uuid:1612663c-e301-4ae2-a82d-57eb33f9ccd4
Page Count                      : 10

EXIF Metadata provided by EXIF.tools