ATrack Technology ATVT1302 CDMA OBD VEHICLE TRACKER User Manual

ATrack Technology Inc. CDMA OBD VEHICLE TRACKER

User Manual

AX7 User Manual Revision: 03 Revision Date: 2012/06/25 ATrack Technology Inc. 3F., No. 88, Sec. 1, Neihu Rd., Neihu Dist., Taipei City 11493, Taiwan (R.O.C.) Tel: +886-2-27975852 Fax: +886-2-27974030 http://www.atrack.com.tw
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 2 of 21 Contents 1.Notification .............................................................................................................................. 31.1.Disclaimer .................................................................................................................................... 31.2.Copyright ...................................................................................................................................... 31.3.Warning ........................................................................................................................................ 32.Introduction ............................................................................................................................. 42.1.Package Content ......................................................................................................................... 42.2.AX7 OBD-II Compliant ................................................................................................................. 43.Hardware Features ................................................................................................................. 53.1.OBD-II Protocol ............................................................................................................................ 53.2.Micro USB Connection ................................................................................................................. 53.3.Buzzer Operation ......................................................................................................................... 53.4.Power Supply ............................................................................................................................... 53.5.Wireless Relay ............................................................................................................................. 63.6.LED Indication .............................................................................................................................. 64.Configration ............................................................................................................................ 74.1.USB Driver Installation ................................................................................................................. 74.2.Configure the AX7 device .......................................................................................................... 104.3.Firmware Upgrade ..................................................................................................................... 145.Installation ............................................................................................................................. 165.1.What is the OBD-II DLC Connector ........................................................................................... 165.2.Using Low Profile OBD-II Extension Cable ................................................................................ 175.3.GPS Performance for Installation .............................................................................................. 185.4.Simple Verification for Installation .............................................................................................. 196.Appendix ................................................................................................................................ 206.1.Hardware Specification .............................................................................................................. 206.2.FCC Regulations: ....................................................................................................................... 21
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 3 of 21 11.. NNoottiiffiiccaattiioonn 11..11.. DDiissccllaaiimmeerr This document, and all other related products, such as device, firmware, and software, is developed by ATrack Technology Inc. thoroughly. At the time of release, it is most compatible with specified firmware version. Due to the functionalities of the devices are being developed and improved from time to time, the change in the protocol, specification, and firmware functions are subjects to change without notice. ATrack Technology Inc. is obligated to modify all the documentation without the limitation of time frame. A change notice shall be released to ATrack Technology Inc. customers upon the completion of document modification. ATrack Technology Inc. products are not intended to be used as life support or rescue equipments. ATrack Technology Inc. is not liable for any loss or injury caused by using or referencing to any products. Any possible means of using or integrating ATrack Technology Inc. products shall be avoided. 11..22.. CCooppyyrriigghhtt ATrack Technology Inc. holds all parts of intellectual rights applicable in the copyright laws in all the countries. Any or all parts of this document shall not be exposed to non-authorized party without any form of approval from ATrack Technology Inc. Any forms, including but not limited to oral, copy, or internet sharing, of releasing or exposing information to an unauthorized party shall be prohibited. ATrack Technology Inc. reserves the rights of litigation in the violation of such copyright laws. 11..33.. WWaarrnniinngg Connecting the wire inputs can be hazardous to both the installer and your vehicle’s electrical system if not done by an experienced installer. This document assumes you are aware of the inherent dangers of working in and around a vehicle and have a working understanding of electricity.
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 4 of 21 22.. IInnttrroodduuccttiioonn AX7 GPS Tracking Device is the most advanced and economical diagnostic device for communicating vehicle information to the CDMA networks. With integrated high sensitive GPS receiver, the AX7 provides the fundamental functions with optional advance features for tracing light trucks and passenger vehicles in need of monitoring location, speed, and many other codes available on the OBD port of vehicles. 22..11.. PPaacckkaaggee CCoonntteenntt Each package contains the following standard device/accessories:  AX7 Device * 1  USB Cable * 1 Optional accessories:  Low Profile OBD-II Extension Cable  Wireless Relay 22..22.. AAXX77 OOBBDD--IIII CCoommpplliiaanntt OBD-II is a standard that issued by SAE (Society of Automotive Engineers) in the early 1990s. But some vehicles are not following this standard. Therefore ATrack cannot guarantee the OBD-II performance of the AX7 with every vehicle. For more information about AX7 OBD-II compliance, please refer to “ATrack AX7 OBD-II Compliant Guide” document.
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 5 of 21 33.. HHaarrddwwaarree FFeeaattuurreess 33..11.. OOBBDD--IIII PPrroottooccooll There are five signaling protocols that are permitted with the OBD-II interface. Most vehicles have been implemented with only one of the protocols. The AX7 features a superior protocol detection algorithm that ensures the device connects reliably even to vehicles that do not fully conform to the OBDII standards. The AX7 supported all legislated OBD-II protocols below:  J1850 PWM (Ford vehicles)  J1850 VPW (GM vehicles)  ISO9141-2 (Asian, European, Chrysler vehicles)  ISO 14230-4 KWP  ISO 15765-4 CAN (11/29 bit ID,250/500 Kbaud) The AXTool has an “OBD Live Data” viewer for showing OBD data in real time. See Section 4.2 for detail descriptions. 33..22.. MMiiccrroo UUSSBB CCoonnnneeccttiioonn The Micro USB can supply power to the AX7 device for parameters setting or firmware upgrade purpose. When micro USB is connected to your laptop/PC and main power is not applied, the OBD-II and CDMA functions will be turned off temporarily. 33..33.. BBuuzzzzeerr OOppeerraattiioonn The internal buzzer of the AX7 can be configured by any events or triggered by remote CDMA server. Refer to AX7 Protocol Document for details. 33..44.. PPoowweerr SSuuppppllyy The AX7 device connects to the OBD-II SAE J1962 connector of vehicle and draws power from the OBD port. No additional power cabling is required for operation. If the OBD port of vehicle is covered or you need to install AX7 in another place for better GPS reception, the optional low profile OBD-II extension cable is required.
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 6 of 21 33..55.. WWiirreelleessss RReellaayy The optional wireless relay is used for immobilizing vehicle when AX7 device is unplugged. Using the short range RF technology, the Wireless Relay will keep receiving RF data from AX7. Once the Wireless Relay loses connection from AX7 for 30 seconds, the Wireless Relay will be switched off. For safety reasons it is recommended to connect the Wireless Relay to control the starter of vehicle. Do NOT use the Wireless Relay to control fuel pump or power train of vehicle. See the following diagram for the wiring connection of Wireless Relay. 33..66.. LLEEDD IInnddiiccaattiioonn The following table describes the LED operation of AX7: LED Indicators Color LED Status Description OBD Green Solid OFF Fast blinking Blinking every 10 seconds OBD Protocol not found OBD-II data transmission. Deep sleep mode GPS Blue Solid OFF Blinking every 1 second Solid ON GPS power OFF GPS not fix GPS Location Fix CDMA Red Solid OFF Blinking every 1 second Blinking every 2 second CDMA Power OFF CDMA no signal CDMA registered
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 7 of 21 44.. CCoonnffiiggrraattiioonn 44..11.. UUSSBB DDrriivveerr IInnssttaallllaattiioonn These instructions illustrate how to correctly install the USB driver in Windows platform. The procedure will vary for other Windows-based Operating Systems. 1. Connect the Device to the USB port on a Windows-based computer. 2. Install the USB driver.  Connect the device to a USB Port Supported Operating Systems including Windows 2000, Windows XP, Windows 7 and Windows Vista. When you connect the device to the computer, you will be prompted to install the driver. Follow the steps in the next section to install the driver.  Install the USB Driver The AX7 USB Driver can be requested from ATrack support via email or from the Partner Login section of the ATrack website at www.atrack.com.tw. After connecting the device to the computer, follow these steps to complete the installation of the USB driver: There might be multiple steps to installing the USB driver. Once each step is completed, the next step will automatically begin itself. The following screen captures may reflect a different device driver than the one you are installing; however, the steps in the procedure will remain the same. 1. The Windows Operating System will detect the new USB device. 2. You will see the following screen for no driver found:
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 8 of 21 3. To install the driver, click on "Browse my computer for driver software" 4. Click on "Browse" button, and go to the driver provided/downloaded from ATrack.
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 9 of 21 5. Windows might give a warning about the verification fail. Please click on "Install this driver software anyway" to proceed. 6. You should be able to see a progress bar running. 7. Once the installation is completed, you should be able to see the COM port showing. This will be the COM port you use for communicate with the AX7 when USB is plugged in.
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 10 of 21 44..22.. CCoonnffiigguurree tthhee AAXX77 ddeevviiccee The AXTool is a simple configuration tool for the AX7 device. It is useful for user to setting basic parameters into the AX7 device. For advanced users, please refer to the ATrack A-Series Protocol Document for detail descriptions.  General Setting [Device Password]: The device password is used for protecting device configurations. The maximum length is 6 characters. [SIM Card PIN Code]: Enter PIN code of SIM card correctly for register to network property if enabled. [Position Format]: Select position format for all reports. [Power Saving Mode]: Enable/Disable power saving mode. When power saving mode is enabled, the AX7 device will go into deep sleep mode after 1 minute of engine off.
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 11 of 21  Track Setting Setting tracking interval when vehicle engine is ON. When [Time Mode] and [Distance Mode] are both selected, the tracking behavior will operate in AND condition.
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 12 of 21  OBD Live Data When AX7 has connected to the OBD-II port of the vehicle. The [OBD Live Data] will showing the OBD live data from OBD-II port. This viewer could help to know which OBD data can be acquired by AX7 device.  System Setting The [System] setting will showing current connected AX7 device information. The [Reset/Action] function can be used to reset parameters or clear buffered messages in the AX7 device.
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 13 of 21  Uploading Setting To Device Once all the settings are entered, use the Blue Downward Arrow ( ) to upload the settings to the device. A popup window will show the progress. When it finishes, the popup window will close.
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 14 of 21 44..33.. FFiirrmmwwaarree UUppggrraaddee Open AXTool program and click [System] item of the manu. Select firmware file which is provided by ATrack and click [Start] button. When “Waiting Device Restart…” message is prompted, please do not turn off the device.
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 15 of 21 When “Upgrade Successfully !!” message is prompted, that means the device firmware is upgraded.
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 16 of 21 55.. IInnssttaallllaattiioonn AX7 is a new design for easy installation. Just find the DLC connector of your vehicle and plug AX7 to the port. 55..11.. WWhhaatt iiss tthhee OOBBDD--IIII DDLLCC CCoonnnneeccttoorr The OBD-II DLC connector is a standard connector for all vehicles which OBD-II compliant. The OBD-II DLC connector is shown below: The OBD-II DLC connector shall be located in the passenger or driver’s compartment in the area bounded by the driver's end of the instrument panel to 300 mm beyond the vehicle centerline. See the following figure for DLC location for most of vehicle. Location #1~#3 is under the dashboard of the driver side. Location #4~#5 is on the dashboard instrument/gauge area. Location #6~#7 is near radio and climate controller. Location #8 is near armrest and handbrake area.
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 17 of 21 55..22.. UUssiinngg LLooww PPrrooffiillee OOBBDD--IIII EExxtteennssiioonn CCaabbllee The ODB-II DLC location is different for every kind of vehicles. For example, the DLC is covered by plastic cover like picture below. The AX7 device is too long to hide when AX7 plug into the DLC connector. The low profile OBD-II extension cable can solve this problem. Another advantage of this cable is to re-location of the AX7 device for better GPS performance.
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 18 of 21 55..33.. GGPPSS PPeerrffoorrmmaannccee ffoorr IInnssttaallllaattiioonn The AX7 determines its position by communicating with the Global Positioning Satellites through internal GPS antenna. The location chosen of the AX7 will have a lot to do with the overall performance of the GPS receiver. The AX7 device has internal GPS antenna but it is not a water proof design. Therefore, it shall be interior installed. Please note that the following interior conditions may cause bad GPS reception of AX7:  Your vehicle has metallic window tint  Your vehicle has a windshield mounted radio antenna  Your vehicle has a solar reflective window The AX7 installation direction shall be considered as well. Please see the following figure: The AX7 used the latest GPS autonomous technology which accelerates GPS positioning by capitalizing on the periodic nature of GPS satellite orbits. GPS orbit predictions are directly calculated by the GPS receiver and no external aiding data or connectivity is required. Therefore, more satellites received are benefit for GPS fix under low signal environment for the next 3~4 days. Good for GPS reception Sky Acceptable Bad for GPS reception GPS Antenna DLC Connector
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 19 of 21 55..44.. SSiimmppllee VVeerriiffiiccaattiioonn ffoorr IInnssttaallllaattiioonn When the device is configured and first plugged into the OBD port. The AX7 will have some buzzer indications for basic function test. The user can simply to verify if the AX7 device is installed properly. Buzzer Indication Description Beep 1 time Device Power ON Beep 2 times OBD Protocol Connected Beep 3 times CDMA Connected Beep 4 times GPS Fix
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 20 of 21 66.. AAppppeennddiixx 66..11.. HHaarrddwwaarree SSppeecciiffiiccaattiioonn AX7 CDMA Specification CDMA Module Dual band CDMA 850/1900MHz CDMA Antennas Internal Type GPS Specification GPS Receiver 50 Channels, L1 Band, C/A Code Sensitivity -159dBm Accuracy 2.5m CEP Assisted GPS Supported OBD-II Specification Supported Protocol ISO 15765-4 (CAN) ISO 14230-4 (KWP2000) ISO 9141-2 (Asian, European, Chrysler vehicles) SAE J1850 VPW (GM vehicles) SAE J1850 PWM (Ford vehicles) Electrical Characteristics Power Source 8-35 VDC Power Consumption Operational 140 mA @ 12VDC (Average) Sleep 18 mA @ 12VDC Deep Sleep <2 mA @ 12VDC Mechanical Specification Dimension 50 x 46 x 25 mm OBD Connector SAE J1962 Type A Weight 54g (Include OBD Option) Environmental Characteristics Operation Temperature -25 ~ +70°C Storage Temperature -40 ~ +85°C Humidity 5 ~ 95%
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 21 of 21 66..22.. FFCCCC RReegguullaattiioonnss::  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. RF Exposure Information This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.  This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

Navigation menu