ATrack Technology ATVT1302 CDMA OBD VEHICLE TRACKER User Manual
ATrack Technology Inc. CDMA OBD VEHICLE TRACKER
User Manual
AX7 User Manual Revision: 03 Revision Date: 2012/06/25 ATrack Technology Inc. Tel: +886-2-27975852 3F., No. 88, Sec. 1, Neihu Rd., Neihu Dist., Fax: +886-2-27974030 Taipei City 11493, Taiwan (R.O.C.) http://www.atrack.com.tw Confidential Document Contents 1. Notification .............................................................................................................................. 3 1.1. Disclaimer .................................................................................................................................... 3 1.2. Copyright ...................................................................................................................................... 3 1.3. Warning ........................................................................................................................................ 3 2. Introduction............................................................................................................................. 4 2.1. Package Content ......................................................................................................................... 4 2.2. AX7 OBD-II Compliant ................................................................................................................. 4 3. Hardware Features ................................................................................................................. 5 3.1. 3.2. 3.3. 3.4. 3.5. 3.6. 4. OBD-II Protocol ............................................................................................................................ 5 Micro USB Connection................................................................................................................. 5 Buzzer Operation ......................................................................................................................... 5 Power Supply ............................................................................................................................... 5 Wireless Relay ............................................................................................................................. 6 LED Indication .............................................................................................................................. 6 Configration ............................................................................................................................ 7 4.1. USB Driver Installation ................................................................................................................. 7 4.2. Configure the AX7 device .......................................................................................................... 10 4.3. Firmware Upgrade ..................................................................................................................... 14 5. Installation ............................................................................................................................. 16 5.1. 5.2. 5.3. 5.4. 6. What is the OBD-II DLC Connector ........................................................................................... 16 Using Low Profile OBD-II Extension Cable................................................................................ 17 GPS Performance for Installation .............................................................................................. 18 Simple Verification for Installation .............................................................................................. 19 Appendix................................................................................................................................ 20 6.1. Hardware Specification .............................................................................................................. 20 6.2. FCC Regulations:....................................................................................................................... 21 © ATrack Technology Inc. All Rights Reserved. Page 2 of 21 Confidential Document 1. Notification 1.1. Disclaimer This document, and all other related products, such as device, firmware, and software, is developed by ATrack Technology Inc. thoroughly. At the time of release, it is most compatible with specified firmware version. Due to the functionalities of the devices are being developed and improved from time to time, the change in the protocol, specification, and firmware functions are subjects to change without notice. ATrack Technology Inc. is obligated to modify all the documentation without the limitation of time frame. A change notice shall be released to ATrack Technology Inc. customers upon the completion of document modification. ATrack Technology Inc. products are not intended to be used as life support or rescue equipments. ATrack Technology Inc. is not liable for any loss or injury caused by using or referencing to any products. Any possible means of using or integrating ATrack Technology Inc. products shall be avoided. 1.2. Copyright ATrack Technology Inc. holds all parts of intellectual rights applicable in the copyright laws in all the countries. Any or all parts of this document shall not be exposed to non-authorized party without any form of approval from ATrack Technology Inc. Any forms, including but not limited to oral, copy, or internet sharing, of releasing or exposing information to an unauthorized party shall be prohibited. ATrack Technology Inc. reserves the rights of litigation in the violation of such copyright laws. 1.3. Warning Connecting the wire inputs can be hazardous to both the installer and your vehicle’s electrical system if not done by an experienced installer. This document assumes you are aware of the inherent dangers of working in and around a vehicle and have a working understanding of electricity. © ATrack Technology Inc. All Rights Reserved. Page 3 of 21 Confidential Document 2. Introduction AX7 GPS Tracking Device is the most advanced and economical diagnostic device for communicating vehicle information to the CDMA networks. With integrated high sensitive GPS receiver, the AX7 provides the fundamental functions with optional advance features for tracing light trucks and passenger vehicles in need of monitoring location, speed, and many other codes available on the OBD port of vehicles. 2.1. Package Content Each package contains the following standard device/accessories: AX7 Device * 1 USB Cable * 1 Optional accessories: Low Profile OBD-II Extension Cable Wireless Relay 2.2. AX7 OBD-II Compliant OBD-II is a standard that issued by SAE (Society of Automotive Engineers) in the early 1990s. But some vehicles are not following this standard. Therefore ATrack cannot guarantee the OBD-II performance of the AX7 with every vehicle. For more information about AX7 OBD-II compliance, please refer to “ATrack AX7 OBD-II Compliant Guide” document. © ATrack Technology Inc. All Rights Reserved. Page 4 of 21 Confidential Document 3. Hardware Features 3.1. OBD-II Protocol There are five signaling protocols that are permitted with the OBD-II interface. Most vehicles have been implemented with only one of the protocols. The AX7 features a superior protocol detection algorithm that ensures the device connects reliably even to vehicles that do not fully conform to the OBDII standards. The AX7 supported all legislated OBD-II protocols below: J1850 PWM (Ford vehicles) J1850 VPW (GM vehicles) ISO9141-2 (Asian, European, Chrysler vehicles) ISO 14230-4 KWP ISO 15765-4 CAN (11/29 bit ID,250/500 Kbaud) The AXTool has an “OBD Live Data” viewer for showing OBD data in real time. See Section 4.2 for detail descriptions. 3.2. Micro USB Connection The Micro USB can supply power to the AX7 device for parameters setting or firmware upgrade purpose. When micro USB is connected to your laptop/PC and main power is not applied, the OBD-II and CDMA functions will be turned off temporarily. 3.3. Buzzer Operation The internal buzzer of the AX7 can be configured by any events or triggered by remote CDMA server. Refer to AX7 Protocol Document for details. 3.4. Power Supply The AX7 device connects to the OBD-II SAE J1962 connector of vehicle and draws power from the OBD port. No additional power cabling is required for operation. If the OBD port of vehicle is covered or you need to install AX7 in another place for better GPS reception, the optional low profile OBD-II extension cable is required. © ATrack Technology Inc. All Rights Reserved. Page 5 of 21 Confidential Document 3.5. Wireless Relay The optional wireless relay is used for immobilizing vehicle when AX7 device is unplugged. Using the short range RF technology, the Wireless Relay will keep receiving RF data from AX7. Once the Wireless Relay loses connection from AX7 for 30 seconds, the Wireless Relay will be switched off. For safety reasons it is recommended to connect the Wireless Relay to control the starter of vehicle. Do NOT use the Wireless Relay to control fuel pump or power train of vehicle. See the following diagram for the wiring connection of Wireless Relay. 3.6. LED Indication The following table describes the LED operation of AX7: LED Indicators Color LED Status Description OBD Green Solid OFF OBD Protocol not found Fast blinking OBD-II data transmission. Blinking every 10 seconds Deep sleep mode Solid OFF GPS power OFF Blinking every 1 second GPS not fix Solid ON GPS Location Fix Solid OFF CDMA Power OFF Blinking every 1 second CDMA no signal Blinking every 2 second CDMA registered GPS CDMA Blue Red © ATrack Technology Inc. All Rights Reserved. Page 6 of 21 Confidential Document 4. Configration 4.1. USB Driver Installation These instructions illustrate how to correctly install the USB driver in Windows platform. The procedure will vary for other Windows-based Operating Systems. 1. Connect the Device to the USB port on a Windows-based computer. 2. Install the USB driver. Connect the device to a USB Port Supported Operating Systems including Windows 2000, Windows XP, Windows 7 and Windows Vista. When you connect the device to the computer, you will be prompted to install the driver. Follow the steps in the next section to install the driver. Install the USB Driver The AX7 USB Driver can be requested from ATrack support via email or from the Partner Login section of the ATrack website at www.atrack.com.tw. After connecting the device to the computer, follow these steps to complete the installation of the USB driver: There might be multiple steps to installing the USB driver. Once each step is completed, the next step will automatically begin itself. The following screen captures may reflect a different device driver than the one you are installing; however, the steps in the procedure will remain the same. 1. The Windows Operating System will detect the new USB device. 2. You will see the following screen for no driver found: © ATrack Technology Inc. All Rights Reserved. Page 7 of 21 Confidential Document 3. To install the driver, click on "Browse my computer for driver software" 4. Click on "Browse" button, and go to the driver provided/downloaded from ATrack. © ATrack Technology Inc. All Rights Reserved. Page 8 of 21 Confidential Document 5. Windows might give a warning about the verification fail. Please click on "Install this driver software anyway" to proceed. 6. You should be able to see a progress bar running. 7. Once the installation is completed, you should be able to see the COM port showing. This will be the COM port you use for communicate with the AX7 when USB is plugged in. © ATrack Technology Inc. All Rights Reserved. Page 9 of 21 Confidential Document 4.2. Configure the AX7 device The AXTool is a simple configuration tool for the AX7 device. It is useful for user to setting basic parameters into the AX7 device. For advanced users, please refer to the ATrack A-Series Protocol Document for detail descriptions. General Setting [Device Password]: The device password is used for protecting device configurations. The maximum length is 6 characters. [SIM Card PIN Code]: Enter PIN code of SIM card correctly for register to network property if enabled. [Position Format]: Select position format for all reports. [Power Saving Mode]: Enable/Disable power saving mode. When power saving mode is enabled, the AX7 device will go into deep sleep mode after 1 minute of engine off. © ATrack Technology Inc. All Rights Reserved. Page 10 of 21 Confidential Document Track Setting Setting tracking interval when vehicle engine is ON. When [Time Mode] and [Distance Mode] are both selected, the tracking behavior will operate in AND condition. © ATrack Technology Inc. All Rights Reserved. Page 11 of 21 Confidential Document OBD Live Data When AX7 has connected to the OBD-II port of the vehicle. The [OBD Live Data] will showing the OBD live data from OBD-II port. This viewer could help to know which OBD data can be acquired by AX7 device. System Setting The [System] setting will showing current connected AX7 device information. The [Reset/Action] function can be used to reset parameters or clear buffered messages in the AX7 device. © ATrack Technology Inc. All Rights Reserved. Page 12 of 21 Confidential Document Uploading Setting To Device Once all the settings are entered, use the Blue Downward Arrow ( ) to upload the settings to the device. A popup window will show the progress. When it finishes, the popup window will close. © ATrack Technology Inc. All Rights Reserved. Page 13 of 21 Confidential Document 4.3. Firmware Upgrade Open AXTool program and click [System] item of the manu. Select firmware file which is provided by ATrack and click [Start] button. When “Waiting Device Restart…” message is prompted, please do not turn off the device. © ATrack Technology Inc. All Rights Reserved. Page 14 of 21 Confidential Document When “Upgrade Successfully !!” message is prompted, that means the device firmware is upgraded. © ATrack Technology Inc. All Rights Reserved. Page 15 of 21 Confidential Document 5. Installation AX7 is a new design for easy installation. Just find the DLC connector of your vehicle and plug AX7 to the port. 5.1. What is the OBD-II DLC Connector The OBD-II DLC connector is a standard connector for all vehicles which OBD-II compliant. The OBD-II DLC connector is shown below: The OBD-II DLC connector shall be located in the passenger or driver’s compartment in the area bounded by the driver's end of the instrument panel to 300 mm beyond the vehicle centerline. See the following figure for DLC location for most of vehicle. Location #1~#3 is under the dashboard of the driver side. Location #4~#5 is on the dashboard instrument/gauge area. Location #6~#7 is near radio and climate controller. Location #8 is near armrest and handbrake area. © ATrack Technology Inc. All Rights Reserved. Page 16 of 21 Confidential Document 5.2. Using Low Profile OBD-II Extension Cable The ODB-II DLC location is different for every kind of vehicles. For example, the DLC is covered by plastic cover like picture below. The AX7 device is too long to hide when AX7 plug into the DLC connector. The low profile OBD-II extension cable can solve this problem. Another advantage of this cable is to re-location of the AX7 device for better GPS performance. © ATrack Technology Inc. All Rights Reserved. Page 17 of 21 Confidential Document 5.3. GPS Performance for Installation The AX7 determines its position by communicating with the Global Positioning Satellites through internal GPS antenna. The location chosen of the AX7 will have a lot to do with the overall performance of the GPS receiver. The AX7 device has internal GPS antenna but it is not a water proof design. Therefore, it shall be interior installed. Please note that the following interior conditions may cause bad GPS reception of AX7: Your vehicle has metallic window tint Your vehicle has a windshield mounted radio antenna Your vehicle has a solar reflective window The AX7 installation direction shall be considered as well. Please see the following figure: Sky GPS Antenna Good for GPS reception DLC Connector Acceptable Bad for GPS reception The AX7 used the latest GPS autonomous technology which accelerates GPS positioning by capitalizing on the periodic nature of GPS satellite orbits. GPS orbit predictions are directly calculated by the GPS receiver and no external aiding data or connectivity is required. Therefore, more satellites received are benefit for GPS fix under low signal environment for the next 3~4 days. © ATrack Technology Inc. All Rights Reserved. Page 18 of 21 Confidential Document 5.4. Simple Verification for Installation When the device is configured and first plugged into the OBD port. The AX7 will have some buzzer indications for basic function test. The user can simply to verify if the AX7 device is installed properly. Buzzer Indication Description Beep 1 time Device Power ON Beep 2 times OBD Protocol Connected Beep 3 times CDMA Connected Beep 4 times GPS Fix © ATrack Technology Inc. All Rights Reserved. Page 19 of 21 Confidential Document 6. Appendix 6.1. Hardware Specification AX7 CDMA Specification CDMA Module Dual band CDMA 850/1900MHz CDMA Antennas Internal Type GPS Specification GPS Receiver 50 Channels, L1 Band, C/A Code Sensitivity -159dBm Accuracy 2.5m CEP Assisted GPS Supported OBD-II Specification Supported Protocol ISO 15765-4 (CAN) ISO 14230-4 (KWP2000) ISO 9141-2 (Asian, European, Chrysler vehicles) SAE J1850 VPW (GM vehicles) SAE J1850 PWM (Ford vehicles) Electrical Characteristics Power Source Power Consumption 8-35 VDC Operational 140 mA @ 12VDC (Average) Sleep 18 mA @ 12VDC Deep Sleep <2 mA @ 12VDC Mechanical Specification Dimension 50 x 46 x 25 mm OBD Connector SAE J1962 Type A Weight 54g (Include OBD Option) Environmental Characteristics Operation Temperature -25 ~ +70°C Storage Temperature -40 ~ +85°C Humidity 5 ~ 95% © ATrack Technology Inc. All Rights Reserved. Page 20 of 21 Confidential Document 6.2. FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. RF Exposure Information This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. © ATrack Technology Inc. All Rights Reserved. Page 21 of 21
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : Create Date : 2013:05:31 18:20:48+08:00 Modify Date : 2013:07:04 20:55:19+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2013:07:04 20:55:19+08:00 Producer : Acrobat Distiller 9.0.0 (Windows) Format : application/pdf Creator : Title : Document ID : uuid:213192d4-d250-4ece-ac7d-1f89d25362ce Instance ID : uuid:b0cd394d-4e7d-4afc-b696-f2a9aaeac4d3 Page Count : 21EXIF Metadata provided by EXIF.tools