Abocom Systems BSM202 Bluetooth Audio Adapter User Manual bsm202 transmitter indd

Abocom Systems Inc Bluetooth Audio Adapter bsm202 transmitter indd

Users Manual

1—Check the package contents2—Charge the battery3—Turn on the power4—Pair (make connection) with receiverUnpack the Bluetooth A/V Transmitter and check that the following items are included:The battery lasts eight hours and is re-charged using the power adapter or the USB cable. To recharge:Plug the USB cable into the DC jack on the Bluetooth A/V Transmitter and connect the other end to your PC.orPlug the power adapter into the DC jack on the Bluetooth A/V Transmitter and con-nect the other end to an electrical outlet.To turn on the power, press and hold the power button until the power LED lights blue.To turn off the power, press and hold the power button until the power LED turns off.The Bluetooth A/V Transmitter can be used with a bluetooth headset or receiver. On fi rst use, the devices must be paired. To pair the devices.1. Connect the audio cable to the audio in jack on the Bluetooth A/V Transmitter.2. Connect the other end to the audio out jack on your MP3 player.Blue LED power is onBlue fl ashing LED connected to device Red LED battery is charging, turns off when chargedRed fl ashing LED battery is low, recharge before LED turns offPower buttonPower buttonCharge status LEDPower/link LEDDC jack Audio inRecharging takes 90 minutes.Bluetooth A/V TransmitterUSB CableAudio CableQuick GuidePower Adapter
5—Connecting with a receiver (cont.)6—Wait for devices to connect90 seconds7—Using other devices8—Specifi cations3. Turn on the power on your headset.4. Turn on the power on the Bluetooth A/V Transmitter. The devices connect (pair) after 90 seconds.The Bluetooth A/V Transmitter can be used with the following devices:HeadsetsReceivers/speakersTroubleshootingIf the Bluetooth A/V Transmitter does not work, try the following:- Ensure connecting devices are charged- Turn off all devices and then turn them on in the order shown in this guide- Ensure devices are within the 10-meter range••Serial number & Firmware version:StandardsBluetooth specifi cation V1.2 compliant.Bluetooth A2DP profi le (AV Profi le)Frequency Band2402 ~ 2480 MHzTx Power0.25 ~ 2.5mW (Bluetooth Power Class II)Rx Sensitivity< -80dBm (BER 0.1%)Distance> 10m (open space)Audio ConnectorAudio Stereo jack 3.5 mmAudio Streaming FormatSBC 48.000 kHzAudio Frequency Range20Hz ~ 22 kHzAudio S/N> 85dBAudio THD< -83dBAudio Output Power> 20mWrmsBattery Life 500mAMusic play : > 8 hrs.Power supplySupply by integrated Polymer rechargeable battery Operation >8hrs.Physical Specifi cation:75 mm (H) x 26 mm (W) x 14.5 mm (D)Environmental Range:Operating temperature:-10 ~ +50 degrees centigradeHumidity: Relative humidity 0 ~ 95%?
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu