Abocom Systems BSM202 Bluetooth Audio Adapter User Manual bsm202 transmitter indd

Download:
Mirror Download [FCC.gov]
Document ID	542704
Application ID	eFuGGQYIc95sY3Fu838FKQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	36.22kB (452748 bits)
Date Submitted	2005-05-17 00:00:00
Date Available	2005-05-17 00:00:00
Creation Date	2005-04-22 10:55:56
Producing Software	Adobe PDF Library 6.0
Document Lastmod	2005-05-16 11:19:20
Document Title	bsm202-transmitter.indd
Document Creator	Adobe InDesign CS (3.0.1)

1—Check the package contents
3—Turn on the power
Unpack the Bluetooth A/V Transmitter and
check that the following items are included:
To turn on the power, press and hold the
power button until the power LED lights blue.
To turn off the power, press and hold the
power button until the power LED turns off.
Power/link LED
Bluetooth A/V Transmitter
Power button
DC jack
USB Cable
Quick Guide
Audio Cable
Power Adapter
2—Charge the battery
The battery lasts eight hours and is recharged using the power adapter or the
USB cable.
To recharge:
Plug the USB cable into the DC jack on
the Bluetooth A/V Transmitter and connect
the other end to your PC.
or
Plug the power adapter into the DC jack
on the Bluetooth A/V Transmitter and connect the other end to an electrical outlet.
Recharging takes 90 minutes.
Audio in
Charge
status LED
Blue LED power is on
Blue flashing LED connected to device
Red LED battery is charging, turns off
when charged
Red flashing LED battery is low, recharge
before LED turns off
4—Pair (make connection) with receiver
The Bluetooth A/V Transmitter can be used
with a bluetooth headset or receiver. On first
use, the devices must be paired.
To pair the devices.
1. Connect the audio cable to the audio in
jack on the Bluetooth A/V Transmitter.
2. Connect the other end to the audio out
jack on your MP3 player.
5—Connecting with a receiver (cont.)
3. Turn on the power on your headset.
7—Using other devices
The Bluetooth A/V Transmitter can be used
with the following devices:
•
Headsets
•
Receivers/speakers
Troubleshooting
If the Bluetooth A/V Transmitter does not
work, try the following:
- Ensure connecting devices are charged
- Turn off all devices and then turn them on
in the order shown in this guide
- Ensure devices are within the 10-meter
range
4. Turn on the power on the Bluetooth A/V
Transmitter.
8—Specifications
6—Wait for devices to connect
The devices connect (pair) after 90 seconds.
90 seconds
Standards
Bluetooth specification V1.2 compliant.
Bluetooth A2DP profile (AV Profile)
Frequency Band
2402 ~ 2480 MHz
Tx Power
0.25 ~ 2.5mW (Bluetooth Power Class II)
Rx Sensitivity
< -80dBm (BER 0.1%)
Distance
> 10m (open space)
Audio Connector
Audio Stereo jack 3.5 mm
Audio Streaming Format
SBC 48.000 kHz
Audio Frequency Range
20Hz ~ 22 kHz
Audio S/N
> 85dB
Audio THD
< -83dB
Audio Output Power
> 20mWrms
Battery Life 500mA
Music play : > 8 hrs.
Power supply
Supply by integrated Polymer rechargeable battery Operation >8hrs.
Physical Specification:
75 mm (H) x 26 mm (W) x 14.5 mm (D)
Environmental Range:
Operating temperature:-10 ~ +50 degrees centigrade
Humidity: Relative humidity 0 ~ 95%
Serial number & Firmware version:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2005:04:22 10:55:56Z
Creator                         : Adobe InDesign CS (3.0.1)
Modify Date                     : 2005:05:16 11:19:20+08:00
About                           : uuid:460bcbb1-b695-4593-8577-8552b40f6e8f
Producer                        : Adobe PDF Library 6.0
Trapped                         : False
Creation Date                   : 2005:04:22 10:55:56Z
Mod Date                        : 2005:05:16 11:19:20+08:00
Metadata Date                   : 2005:05:16 11:19:20+08:00
Creator Tool                    : Adobe InDesign CS (3.0.1)
Rendition Class                 : proof:pdf
Document ID                     : adobe:docid:indd:bc11325b-b2d9-11d9-a394-ffa3098e626b
Instance ID                     : uuid:858c166e-7697-47d9-a3b5-be64bb81493b
Derived From Instance ID        : bc11325a-b2d9-11d9-a394-ffa3098e626b
Derived From Document ID        : adobe:docid:indd:bc113259-b2d9-11d9-a394-ffa3098e626b
Format                          : application/pdf
Title                           : bsm202-transmitter.indd
Page Count                      : 3

EXIF Metadata provided by EXIF.tools