Abocom Systems SDW11G SDIO Wireless LAN Card User Manual SDW11g

Download:
Mirror Download [FCC.gov]
Document ID	694705
Application ID	J/jsVHmyOsEHUIcyXGdYHg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	40.83kB (510415 bits)
Date Submitted	2006-08-17 00:00:00
Date Available	2006-08-17 00:00:00
Creation Date	2006-06-27 13:50:48
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2006-07-11 11:32:59
Document Title	Microsoft Word - SDW11g _吊卡用_
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

INSTALLING THE DRIVER
Installation of the SD WLAN Card Driver to the Pocket PC using
Microsoft Active Sync®
1. Connect your PDA to your computer and make sure Active-Sync® has
established a connection between the two devices.
2. Insert the included CD-ROM to your PC. The main screen will appear,
click Install Driver to start driver installation.
Note: Do not insert the SD WLAN Card into the card slot of your
PDA until the Driver installation has been performed.
3. Click “YES” to continue the installation.
4. Click “OK” to complete the driver installation.
ACCESSING THE WLAN UTILITY
1. Insert the SDIO Wireless LAN Card into the SD slot of your PDA
2. Go to Start > Settings > Connections tab > Wireless Ethernet to access
the Windows CE built-in WLAN utility
CONFIGURING WLAN UTILITY
Select an available AP or router from the list and tap Connect to make a
connection.
Wireless tab
Wireless Network
Network to access
Automatically connect to
non-preferred networks
Select an available network device from
the list and tap Connect.
Select the type of network access from
the pull-down list.
All available: A group of wireless
devices communicating with both
access points and network adapters.
Only access points: A group of
wireless
devices
communicating
directly with only access points.
Only computer-to-computer: A group
of wireless devices communicating
directly with each other without the use
of an access point.
Tap the checkbox to enable this
function, if the Automatically connect
to non-preferred networks is enabled,
your device will detect all the new
networks for you to configure.
5
Network Adapters tab
My network Card connects to
Tap Work or The internet from
the pull-down menu.
Work: Connects to the network in
your office.
The internet: Connects to your
ISP at home.
Tap an adapter to modify
settings
Tap an adapter from the list to
enter its configuration screen.
If SDIO 802.11g Adapter is tapped, the following screen will appear for
you to configure:
7
IP Address tab
To use DHCP, tap User assigned-IP
Address. The Wireless Router will
act as a DHCP server. An IP Address
will be obtained from the Wireless
Router.
Use server-assigned IP address
IP Address: Enter the IP address
(within the range of the wireless
router’s IP address, for instance, if
the IP address of the router which
you
wish
to
connect
is
192.168.1.254, you may enter the IP
address here from 192.168.1.1 to
192.168.1.253 ).
Subnet mask: The Subnet Mask
must be the same as that set on your
Ethernet network.
Default Gateway: Enter the IP
address of your network’s gateway.
The gateway is the device that
enables communication between
your computers and the Internet. In
most cases, your router acts as your
gateway.
Use specific IP address
10
Name Servers tab
DNS
Enter the IP address of your ISP's server, which
translates the names of websites into IP addresses.
Alt DNS
The secondary IP address of your ISP’s server.
WINS
The Windows Internet Naming Service (WINS)
converts NetBIOS names to IP addresses. If using a
WINS server, please enter that server’s IP address.
Otherwise, leave this field blank.
Alt WINS
The secondary IP address of your WIN server.
M73-APO11-270
11
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
12
12

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : 3.1-701
About                           : uuid:02ac784b-6ae3-40b1-b90c-5875e2cb26ca
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2006:06:27 13:50:48+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2006:07:11 11:32:59+08:00
Metadata Date                   : 2006:07:11 11:32:59+08:00
Document ID                     : uuid:42e63592-f5eb-4f00-a6ae-887870fd9ad1
Instance ID                     : uuid:ada346e1-0ab2-4564-a332-90f406096b45
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - SDW11g _吊卡用_
Has XFA                         : No
Page Count                      : 12
Author                          : Administrator

EXIF Metadata provided by EXIF.tools