Acroprint Time Recorder 1012 ENTRY CONTROL BADGE READER User Manual Micro computer Electronic Time Clock

Acroprint Time Recorder Company ENTRY CONTROL BADGE READER Micro computer Electronic Time Clock

USERS MANUAL 2

 c)  Proximity Readers Two Proximity Readers are available on the DC7000.    The first Proximity Reader uses 125kHz, Read Only, ISO Proximity Card, 64 Bit Encoding (Manchester). Serial Output Data String contains a 9 Bit Header, 40 Bits of Data, 14 Parity Bits and 1 Stop Bit. The second reader is a HID Reader that uses HID Badges:     125kHz, Read Only, H10301 (Std. 26 Bit), Facility Code 101. Note: the reader is not restricted to 26 Bit badges 4. Ports and Connections Ethernet Port The Ethernet port is located on the lower left corner of the terminal. It is a 10 position 8-pin female port, which will accept a male 10/100BASE-T (RJ-45) modular connector. The terminal has the capability to communicate across an intranet, a WAN or the Internet.              Indicator Lights Green Wireless RF Activity LEDFront Green LED: Ethernet Link Rear Green LED:   Ethernet Receive Ethernet Port RS232 Port  12
 Wireless WiFi Connection The Wireless Ethernet connection   is established via Wireless 802.11b.          RS-232 Serial port The RS-232 serial port is located on the lower left corner of the terminal. It is a six position 4-pin female port, which will accept a male RJ-11 modular connector.   The DC7000 Terminal can use RS-232 serial communication to connect directly to a host computer. A connection for an IBM® PC or IBM-PC compatible computer is shown on the following page.          13

Navigation menu