Action Technology BTSC001AA BLUETOOTH SPEAKER User Manual User Manul en

Download:
Mirror Download [FCC.gov]
Document ID	1773808
Application ID	n23R5N11VHDl0mkfA89aDw==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.38kB (92231 bits)
Date Submitted	2012-08-24 00:00:00
Date Available	2012-08-24 00:00:00
Creation Date	2012-08-20 15:43:03
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2012-08-20 15:43:03
Document Title	Microsoft Word - User Manul_en.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

MAIN UNIT
POWER UP
TROUBLESHOOTING
Switch the Power knob to 'ON' to power on the unit.
Hearing Distortion
When the battery is low, you can hear the "Ting-ting" sound from the speaker, you
A. Lower the volume on the speaker an/or phone/bluetooth device.
must connect the Mini USB cable to the DC in Jack to charge the Built-in battery,
B. Make sure the speaker is charged up.
and the Red LED turn on.
Not Loud Enough
When fully charged, the Red LED turn off.
A. Turn up the volume on your phone/bluetooth device or the speaker.
B. Make sure it's charged up.
Unable To Pair With Bluetooth Device.
A. Confirm that your phone/device is Bluetooth compatible.
BUTTONS
B. Follow "Bluetooth
connection" instructions
Experiencing Signal Loss Or Dropouts Via Blluetooth
A. Move the speaker closer to your phone/device.
Re-connect
Volume Control
B. Make sure the battery is charged up.
Re-connect Button
CONNECTION
Use this button to disconnect the current connection and return to pairing
Audio Input
mode.
Play audio from any device with a headphone jack or audio output, connect to.the
SPECIFICATIONS
Volume Control Buttons
speaker's Line in jack used the Line in cable
Battery Life: Up to 3h (varies by volume level and audio content)
C. Turn off the speaker and your phone/device,then power on and reconnect
Increase and decrease the volume
Power: 2W x 2
LED
Dimensions: 150mm x 57mm x 40mm
Red LED: Charging the built-in battery.
Weight：265g
Blue LED flashing quickly: Unit is in paring mode and ready to connect to
your phone or Bluetooth Device. Go to your phone's Bluetooth setting to
ACCESSERIES
connect.
AC Adaptor: 5V/1A
Blue LED flashing slowly: Bluetooth connected
USB Cable: 1pcs
REAR VIEW
Bluetooth connection
Line in Cable: 1pcs
The speaker can play the wireless steam audio from any Bluetooth device within
10m. Just follow the steps:
CAUTIONS
1. Go to the setting of your Bluetooth device and enable BLUETOOTH, and search
To ensure the proper operation, all the safety and operating instructions should
Bluetooth device.
be read carefully before connection and operation.
2. When " BTS-C001AA" appears, select it.
To prevent fire or shock hazard, DO NOT expose the Speaker to rain or
3. If asked for password, please enter"0000".
moisture.
4. If Bluetooth connected, the Blue LED will flash slowly.
Do not expose the Speaker extreme temperatures, excessive moisture, rain or
sand. Never use this device in high temperature or in high humidity. The best
operating temperature is between 5°C~40°C.
Do not place the appliance on or near a hot gas flame, electric element, and
heaters or in areas subjected to direct sunlight.
Don't block any ventilation openings.
Clean the Speaker only with a dry cloth.
This product is intended to be used only with the power supply provided.
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment This device and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2012:08:20 15:43:03+08:00
Modify Date                     : 2012:08:20 15:43:03+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : Microsoft Word - User Manul_en.doc
Creator                         : Administrator
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:c2bef620-2246-4dca-a604-9b8f31a16b99
Instance ID                     : uuid:2039d8f6-e3d6-449d-94f9-ca01bfd00840
Page Count                      : 2

EXIF Metadata provided by EXIF.tools