Actiontec Hpe400Avp Quick Start Guide MP 4PH&EA Kit QS2

: Actiontec Actiontec-Hpe400Avp-Quick-Start-Guide actiontec-hpe400avp-quick-start-guide actiontec pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

8

4 Plug the MegaPlug

Step

Step

1 Get the MegaPlug AV

Step

Adapter into a Power Outlet.

200 Mbps Powerline Ethernet
Network Adapter from the box.

Do NOT plug the Adapter into a
power strip or wall outlet that uses
surge protection as the Adapter
may not work.

Plug one end of the
Power Cord into the back of the
MegaPlug 4-Port Switch.

9 Plug the other end into a

Step

2 Get one Ethernet Cable.

Step

5 Plug the other end of the

Step

Broadband
Router

Ethernet Cable into an OPEN
Ethernet Port on your Broadband
Modem or Router.

6 Get the MegaPlug AV

Power Outlet.
Do NOT plug the Switch into a
power strip or wall outlet that uses
surge protection as the Switch
may not work.

Step

3 Plug one end of the

Step

Ethernet Cable into the Ethernet
Port on the bottom of the
MegaPlug Adapter.

200 Mbps 4-Port Switch from the
box. You will connect the 4 Port
Switch to the device(s) that you
want to have Internet access.

10 Get the other

Step

Ethernet Cable.

7 Get the Black Power

Step
Note: An Ethernet port looks similar to a phone port but is slightly larger.

Cord.
Flip this Quick Start Guide over to continue

NEXT

Part No: 0530-0602-000

Questions? Call 1-888-436-0657 (USA)

Questions? Call 1-888-436-0657 (USA)

QS1024/0309

Questions? Call 1-888-436-0657 (USA)

11

Step

Plug one end of the
Ethernet Cable into an Ethernet
Port on the back of the
MegaPlug 4-Port Switch.

12 Plug the other end of

Step

the Ethernet Cable into the
device that you want to connect
to the Internet.
Note: You can repeat Steps 10 thru 12 for each device that needs to be connected
to the Internet.

13

Step

Check the LEDs and
make sure both Link Lights turn
SOLID GREEN.

Model# HPE200AVP,
HPE400AVP

Congratulations!
You have successfully installed the MegaPlug AV Powerline Ethernet
Network Adapter and 4-Port Switch.
These adapters ship with a generic encryption key. If you would
like to change the key, go to www.actiontec.com/howto for
further instructions. If you require additional adapters for additonal
computers/devices, they may be added by following the same
steps in this guide.

Quick Start Guide
This Quick Start Guide will walk you through the easy
steps to install your MegaPlug™ AV Powerline Ethernet Kit.

You will need the following items:

• One MegaPlug™ AV 200 Mbps
Powerline Ethernet Network Adapter

• One MegaPlug™ AV 200 Mbps
4-Port Switch

Note: This Quick Start Guide shows you how to install the 4-Port Switch in a
location apart from your router/gateway (another room for example). If you need
additional Ethernet ports near the router/gateway, you can reverse the installation
order of the Powerline units (i.e., install the 4-Port Switch first, then install the
MegaPlug Adapter in another room).

• Two Ethernet Cables
• One Black Power Cord
NEXT

Questions? Call 1-888-436-0657 (USA)

Questions? Call 1-888-436-0657 (USA)