Ademco 8DLLSD500 Lyric Smart Sensor - Heat and Smoke Detector User Manual
Honeywell International Inc. Lyric Smart Sensor - Heat and Smoke Detector Users Manual
Ademco >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2948277 |
| Application ID | G4PzyjdJ7HDEozAMEo9W5A== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 115.14kB (1439264 bits) |
| Date Submitted | 2016-03-31 00:00:00 |
| Date Available | 2016-09-27 00:00:00 |
| Creation Date | 2015-08-05 12:51:26 |
| Producing Software | Adobe PDF Library 11.0 |
| Document Lastmod | 2016-02-29 14:42:08 |
| Document Title | Users Manual |
| Document Creator | Acrobat PDFMaker 11 for Word |
| Document Author: | E727032 |
AGENCY STATEMENTS ARE AT THE BOTTOM OF PAGE 2 This wireless heat / smoke detector is intended for use with Honeywell controls that support SiX™ series devices. FC: This wireless heat / smoke detector is intended for use with Honeywell controls that support SiX™ series devices. SP: This wireless heat / smoke detector is intended for use with Honeywell controls that support SiX™ series devices. PA: This wireless heat / smoke detector is intended for use with Honeywell controls that support SiX™ series devices. Smoke Detector / OPEN Open OPEN / OPEN NOTE: All smoke detectors programmed in the panel to operate in one-go-all-go mode will sound on alarm. FC: For programming Smoke or Heat alarms and Tamper, see the Controller’s instructions. NOTE: If programmed in the panel to operate in one-go-all-go mode, all smoke detectors in the system will sound on alarm FC: NOTE: Once enrolled, the device cannot be used with another system until it is removed from the current controller. See the controller’s instructions, SP For programming Smoke or Heat alarms and Tamper, see the Controller’s instructions. NOTE: If programmed in the panel to operate in one-go-all-go mode, all smoke detectors in the system will sound on alarm PA: For programming Smoke or Heat alarms and Tamper, see the Controller’s instructions. SP: NOTE: Once enrolled, the device cannot be used with another system until it is removed from the current controller. See the controller’s instructions, To silence the detector: Mount / Mount / Mount / Mount For programming Smoke or Heat alarms and Tamper, see the Controller’s instructions. NOTE: Once enrolled, the device cannot be used with another system until it is removed from the current controller. See the controller’s instructions, PA: NOTE: Once enrolled, the device cannot be used with another system until it is removed from the current controller. See the controller’s instructions. NOTE: After enrolling and before mounting permanently, conduct Go/No Go tests (see controller’s instructions) to verify adequate signal strength. Adjust the device location and orientation as necessary. FC: NOTE: After enrolling and before mounting permanently, conduct Go/No Go tests (see controller’s instructions) to verify adequate signal strength. Adjust the device location and orientation as necessary. SP: NOTE: After enrolling and before mounting permanently, conduct Go/No Go tests (see controller’s instructions) to verify adequate signal strength. Adjust the device location and orientation as necessary. PA: NOTE: After enrolling and before mounting permanently, conduct Go/No Go tests (see controller’s instructions) to verify adequate signal strength. Adjust the device location and orientation as necessary. NOTE: If programmed in the panel to operate in one-go-all-go mode, all smoke detectors in the system will sound on alarm Test / Test Test / Test Enroll / Enroll / Enroll / Enroll Press the test switch or disarm the system at the controller. If the alarm condition continues, the detector is only quiet for 5 minutes. When programmed in one-goall-go mode, the test switch will not silence the detector. *Use UL/ANSI Approved canned smoke. / Use UL/ANSI Approved canned smoke. / Use UL/ANSI Approved canned smoke. / Use UL/ANSI Approved canned smoke. LEDS and 85dB SOUNDER / LEDS and 85dB SOUNDER / LEDS and 85dB SOUNDER / LEDS and 85dB SOUNDER Sounder Status Power Up – Enrollment / Power Up – Enrollment / Power Up – Enrollment / Power Up – Enrollment Power Up – Device enrolled / Power Up – Device enrolled / Power Up – Device enrolled/ Power Up – Device enrolled Normal mode or Communicating with the panel/ Normal mode or Communicating with the panel / Normal mode or Communicating with the panel / Normal mode or Communicating with the panel Maintenance1 / Maintenance1 / Maintenance1 / Maintenance1 Test Alarm / Test Alarm / Test Alarm2 / Test Alarm2 Heat Alarm3 / Heat Alarm3 / Heat Alarm3 / Heat Alarm3 Smoke Alarm / Smoke Alarm / Smoke Alarm / Smoke Alarm Low Battery / Low Battery / Low Battery / Low Battery Tamper Activated / Tamper Activated / Tamper Activated / Tamper Activated See Maintenance Section/ See Maintenance Section / See Maintenance Section /See Maintenance Section Test activated by the test switch or from the panel / Test activated by the test switch or from the panel / Test activated by the test switch or from the panel / Test activated by the test switch or from the panel ≥ 135° F / 57° C or Temperature rise of ≥15° F ( 8.33° C) within 1 minute / ≥ 135° F (57° C) or Temperature rise of ≥15° F (8.33° C) within 1 minute / ≥ 135° F(57° C) or Temperature rise of ≥15° F (8.33° C) within 1 minute / Starts chirping after 7 days, continues until the batteries are replaced or die / Starts chirping after 7 days, continues until the batteries are replaced or die / Starts chirping after 7 days, continues until the batteries are replaced or die / Starts chirping after 7 days, continues until the batteries are replaced or die 2014 Honeywell International Inc. Honeywell and is a registered trademark of Honeywell International Inc. All other trademarks are the properties of their respective owners. All rights reserved www.honeywell.com/security BATTERY CAUTION: Risk of fire, explosion and burns. Do not recharge, disassemble, heat above 212° F (100° C) or incinerate. Dispose of used batteries properly. Keep away from children. FC:BATTERY CAUTION: Risk of fire, explosion and burns. Do not recharge, disassemble, heat above 212° F (100° C) or incinerate. Dispose of used batteries promptly. Keep away from children. Replace Battery / Replace Battery / Replace Battery SP: BATTERY CAUTION: Risk of fire, explosion and burns. Do not recharge, disassemble, heat above 212° F (100° C) or incinerate. Dispose of used batteries promptly. Keep away from children. PA: BATTERY CAUTION: Risk of fire, explosion and burns. Do not recharge, disassemble, heat above 212° F (100° C) or incinerate. Dispose of used batteries promptly. Keep away from children. Approval Listings: Specifications: FCC / IC ETL Listed to UL639 cETL Listed to ULC S306-03 RoHS Range: 0’- 25’/ 0 – 7.6m; Selectable RF Frequency: 2.4GHz Battery: 2 x 3V, Lithium; Panasonic CR123A, Duracell DL 123, Duracell DL 123A, Honeywell 466 Tamper: Wall Operating Temperature: 32° – 95° F / 0° – 35° C Relative Humidity: 95% max. (Agency Compliance – 93% max.), non-condensing Dimensions: 3.78” Diameter x 1.14” Thick / 96 mm Diameter x 29mm Thick Product must be tested at least once each year / Le fonctionnement du produit doit être vérifié au moins une fois par année / El producto debe ser probado al menos una vez al año / O produto deve ser testado pelo menos uma vez por ano Support / Support / Support / Support https://mywebtech.honeywell.com/ U.S. warranty / U.S. warranty / U.S. garantie / U.S. garantia www.honeywell.com/security/hsc/resources/wa MyWebTech Warranty FEDERAL COMMUNICATIONS COMMISSION & INDUSTRY CANADA STATEMENTS The user shall not make any changes or modifications to the equipment unless authorized by the Installation Instructions or User's Manual. Unauthorized changes or modifications could void the user's authority to operate the equipment. FCC / IC STATEMENT This device complies with Part 15 of the FCC Rules, and RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à la partie 15 des règles de la FCC & de RSS-210 des Industries Canada. Son fonctionnement est soumis aux conditions suivantes: (1) Cet appareil ne doit pas causer d’interférences nuisibles. (2) Cet appareil doit accepter toute interférence reçue y compris les interférences causant une reception indésirable. RF Exposure Warning – The antenna(s) used for this device must be installed to provide a separation distance of at least 7.8 inches (20 cm) from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Mise en Garde Exposition aux Frequences Radio: L'antenne (s) utilisée pour cet émetteur doit être installée à une distance de séparation d'au moins 7,8 pouces (20 cm) de toutes les personnes. REFER TO THE INSTALLATION INSTRUCTIONS FOR THE CONTROL WITH WHICH THIS DEVICE IS USED, FOR DETAILS REGARDING LIMITATIONS OF THE ENTIRE ALARM SYSTEM. 2 Corporate Center Drive, Suite 100 P.O. Box 9040, Melville, NY 11747 Ê800-15961PŠ 800-15961 11/15 Rev C BETA2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : E727032 Create Date : 2015:08:05 12:51:26-07:00 Modify Date : 2016:02:29 14:42:08-05:00 Subject : Has XFA : No Language : EN-US XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2016:02:29 14:42:08-05:00 Creator Tool : Acrobat PDFMaker 11 for Word Document ID : uuid:bdfedc70-fa11-415f-b264-8183f67ba734 Instance ID : uuid:083a858f-8630-48a8-9096-9c5db368f0a7 Format : application/pdf Title : Description : Creator : E727032 Producer : Adobe PDF Library 11.0 Keywords : Source Modified : D:20150805195119 Company : Honeywell Page Layout : OneColumn Page Count : 2EXIF Metadata provided by EXIF.tools