Adura Technologies LCR10P2 Lighting control for commercial and industrial buildings User Manual p1 antenna

Adura Technologies, Inc. Lighting control for commercial and industrial buildings p1 antenna

Contents

Antenna installation instructions

external antenna
INSTALLATION
INSTRUCTION MANUAL
Several ADURA™ devices have two antenna options to allow for a robust RF connection.
For each ADURA product, the primary antenna is internal to the enclosure and is used by
default. If the installation environment results in a poor RF link quality for the default
antenna, a second external antenna can be used to improve RF link performance. For this
option, the separate external antenna can be connected to the provided MMCX antenna
jack on the ADURA device.
Only ADURA-provided or authorized external antennas may be used with ADURA products.
All antennas must be installed by trained professionals.
The antenna type must be one of the following:
•1/2 wave whip antenna with a maximum gain of +2dBi
•1/4 wave dome antenna with a maximum gain of +0dBi
Installation Instructions:
1. Remove power to the device(s).
2. Connect the external antenna to the MMCX antenna jack on the device(s).
3. ADURA-provided antennas have a 3’ cable to allow mounting of the antenna element
outside of the light xture or other enclosure. Some ADURA antenna models will mount
directly in the 1/2” knockout hole for convenience.
4. Once the antenna is securely mounted, power on the connected device(s).
5. Using the ADURA commissioning tools, congure the appropriate device(s) to use the
additional external antenna. See commissioning documentation for more information.
ADURA TECHNOLOGIES™
San Francisco, CA 94105
Tel: 415.227.0868 • Toll Free 1-888-828-8281
CAUTION
• Disconnect power before installation or service.
• All installation and maintenance work must be performed by qualied personnel.
• The antenna must be installed in accordance with state, local and national
electrical codes and requirements.
TM
Ordering Information:
XA Instructions 08.09
Catalog Number Description
ADURA TECHNOLOGIES™
San Francisco, CA 94105
Tel: 415.227.0868 • Toll Free 1-888-828-8281
w w w . a d u r a t e c h . c o m
TM
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful Interference when the equipment
is operated in a commercial environment. The equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communica-
tions. Operation of the equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his/her own expense.
Class A Digital Devices
WARRANTY INFORMATION
Adura Technologies
™
warranties its products to be free of defects for a period of ve years. Adura Technologies will, at its option,
repair or replace any product that is defective in materials or manufacture that is returned to ADURA within the warranty period.
This warranty is void if this product has been installed improperly or in an improper environment, overloaded, misused, or altered
in any manner, or not installed in accordance with any labels or instructions. Adura Technologies is not liable for incidental, indirect,
special, or consequential damages, including without limitation, damage to, or loss of use of property, revenue or prot. This
warranty does not cover the cost of installation, removal or reinstallation.
To comply with RF exposure compliance requirements, for mobile congurations, a separation distance of at least 20 cm must be
maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with
any other antenna or transmitter.
Optional external antenna
XA
Specications:
Antenna Type:
Radio Frequency: 2405 MHz - 2480 MHz
1/2 wave whip antenna with a maximum gain of +2dBi
1/2 wave dome antenna with a maximum gain of +0dBi
Connector Type:
MMCX Plug
~3' coax cable
Antenna
Rubber Knockout Plug for mounting
ADURA™ Light Controller
Diagram #1 - Light Controller
Diagram #2 - Sensor Interface
MMCX plug (antenna)
MMCX jack (ADURA device)
SI-2C

Navigation menu