Advance Bright BTS301 Portable Bluetooth Speaker User Manual BTS301 IM OP

Advance Bright Limited Portable Bluetooth Speaker BTS301 IM OP

User Manual

220mm (H) x 270mm (W)Power & Pairing ButtonVolume & Play Button Flashlight & Mood Light ButtonMicro USBPower InputLine-inTwist-to-Use Lantern(With brightness control)LED Indicator• Make sure the 3.5 mm is correctly and rmly connected to the Bluetooth Speaker and non-Bluetooth device.• Make sure the non-Bluetooth device is set to a comfortable listening level.Safety InformationRead all information and warning before the use of this product. Improper use of this product may lead to product damage. You (the buyer) other than the dealer will be held liable for such as overheat, toxic fume, re or explosion.• Do not attempt to charge the speaker by using any other method other than USB Power Adapter or computer.• To reduce the risk of re or electric shock, do not expose the speaker to rain or moisture while charging.• The speaker should not be exposed to dripping or splashing, and objects lled with liquids, such as vases, should not be placed on or near it while being charged or charging other devices. As with any electronic products, use care not to spill liquids into any part of the product. Liquids can cause a failure and/or a re hazard.• Do not place any ame sources, such as lighted candles, on or near the speaker.• Do not expose the speaker to excessive heat, including direct sunlight or re or the like.• Make no modications to the product or accessories.• If the battery begins to leak, do not allow the liquid to come in contact with your skin or eyes. If contact has been made, wash the affected area with plenty of water and seek medical attention immediately.• Do not step on, throw, or drop the speaker, or expose it to a strong shock.• Do not attempt to service the speaker yourself. Opening or removing covers may expose you to dangerous voltages or other hazards and will void the manufacturer’s warranty. To prevent risk of re or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles.Precautions1. The radio waves emitted by the Bluetooth Speaker and Bluetooth device can affect operation of nearby electronics including medical devices.2. Keep the unit in a cool, dry place.For more information, please visit www.yelltowin.comDesigned by Ye!! in Hong KongMade in ChinaREDGREEN Fully ChargedIndicator StatusBLUEFLASHING BLUEChargingPairedPairing ModeStellar | BTS301Portable Bluetooth Speaker with LightingUser ManualIncluded In This Package• Stellar• Micro USB Cable• 3.5mm AUX Cable• Wrist Strap• User ManualOverviewLED IndicatorsHow to Charge Stellar1. Plug the Stellar into your computer or USB compatible wall charger via the included Micro USB Cable.2. When the Stellar is fully charged, disconnect the cable.Note: Approximately 3 - 4 hours required for full charge. Battery will last up to 6 hours when connected wirelessly and up to 8 hours when connected through Line-in.Using Stellar1. Twist Stellar to the end of the right hand side and the lantern will turn on.2. Twist Stellar back to the middle and it will turn off all the light.3. Click on the ashlight button to turn on/off the ashlight4. Long press the ashlight and mood light button to turn on/off the mood light.5. While in mood light mode, click the ashlight and mood light button to hold/cancel your desired color.Getting ConnectedBluetooth Pairing1. Long press the power & pairing button. 2. The speaker is discoverable and ready for pairing. 3. The status indicator blinks blue.Power & Pairing Button4. On your Bluetooth music device, turn on Bluetooth and scan for devices in its Bluetooth menu.5. When the “Ye!! – BTS301” appears on the device list of your device, select “Ye!! – BTS301”. The status indicator turns solid blue after paired.Example: iPad / iPhone / iPod TouchPress Settings > General > Bluetooth > Bluetooth ON > Ye!! – BTS301 > PairExample: Android 4.3 Jelly Bean SmartphonePress Settings > Bluetooth ON > Scan > Ye!! – BTS301 > Settings > Check the Media audio boxReconnecting Bluetooth DeviceKeep in mind that the Bluetooth Speaker has a 10 meter range in open eld. If you move out of range or turn off the Bluetooth feature on your Bluetooth device, the Bluetooth Speaker will disconnect from your device. To reconnect, simply follow the instruction in the “Getting Connected” section.Changing Connected Bluetooth Device1. Disable the Bluetooth function of your Bluetooth device.2. The Bluetooth Speaker can now be connected to the different Bluetooth device.3. Following the instructions in the “Getting Connected” sectionPlay Audio from Non-Bluetooth DeviceSpecicationsTroubleshootingNo connection between Bluetooth Speaker and your Bluetooth device.• Make sure the Bluetooth Speaker is fully charged• Make sure the BT mode is switched on.• Make sure your Bluetooth device is available and supports Bluetooth Advance Audio Distribution prole.• Make sure the Bluetooth Speaker is within range of your Bluetooth device.Audio is not coming out from the Bluetooth Speaker after Bluetooth device successfully paired.• Make sure the Bluetooth device volume is set to a comfortable listening level.Audio is not coming out from the Bluetooth Speaker after the non-Bluetooth device connected with the aux in cable.Back ViewFront ViewComputer(not included)USB CompatibleWall charger(not included)orMoodLightStellar allows you to play your music in two different ways.CMYCMMYCYCMYK
220mm (H) x 270mm (W)Model No.Output PowerFlashlight DistanceInput VoltageInputPlayback TimeBluetooth VersionOperating DistanceDimensionsBTS3013W20 metersDC 5V / 1AWireless Bluetooth & 3.5mm wired auxiliaryUp to 6 hours on BluetoothBluetooth 2.1 with EDRUp to 33 feet (10 metres)180 x D72 mmWeight 371 grams• Make sure the 3.5 mm is correctly and rmly connected to the Bluetooth Speaker and non-Bluetooth device.• Make sure the non-Bluetooth device is set to a comfortable listening level.Safety InformationRead all information and warning before the use of this product. Improper use of this product may lead to product damage. You (the buyer) other than the dealer will be held liable for such as overheat, toxic fume, re or explosion.• Do not attempt to charge the speaker by using any other method other than USB Power Adapter or computer.• To reduce the risk of re or electric shock, do not expose the speaker to rain or moisture while charging.• The speaker should not be exposed to dripping or splashing, and objects lled with liquids, such as vases, should not be placed on or near it while being charged or charging other devices. As with any electronic products, use care not to spill liquids into any part of the product. Liquids can cause a failure and/or a re hazard.• Do not place any ame sources, such as lighted candles, on or near the speaker.• Do not expose the speaker to excessive heat, including direct sunlight or re or the like.• Make no modications to the product or accessories.• If the battery begins to leak, do not allow the liquid to come in contact with your skin or eyes. If contact has been made, wash the affected area with plenty of water and seek medical attention immediately.• Do not step on, throw, or drop the speaker, or expose it to a strong shock.• Do not attempt to service the speaker yourself. Opening or removing covers may expose you to dangerous voltages or other hazards and will void the manufacturer’s warranty. To prevent risk of re or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles.Precautions1. The radio waves emitted by the Bluetooth Speaker and Bluetooth device can affect operation of nearby electronics including medical devices.2. Keep the unit in a cool, dry place.For more information, please visit www.yelltowin.comDesigned by Ye!! in Hong KongMade in ChinaIncluded In This Package• Stellar• Micro USB Cable• 3.5mm AUX Cable• Wrist Strap• User ManualOverviewLED IndicatorsHow to Charge Stellar1. Plug the Stellar into your computer or USB compatible wall charger via the included Micro USB Cable.2. When the Stellar is fully charged, disconnect the cable.Note: Approximately 3 - 4 hours required for full charge. Battery will last up to 6 hours when connected wirelessly and up to 8 hours when connected through Line-in.Using Stellar1. Twist Stellar to the end of the right hand side and the lantern will turn on.2. Twist Stellar back to the middle and it will turn off all the light.3. Click on the ashlight button to turn on/off the ashlight4. Long press the ashlight and mood light button to turn on/off the mood light.5. While in mood light mode, click the ashlight and mood light button to hold/cancel your desired color.Getting ConnectedBluetooth Pairing1. Long press the power & pairing button. 2. The speaker is discoverable and ready for pairing. 3. The status indicator blinks blue.4. On your Bluetooth music device, turn on Bluetooth and scan for devices in its Bluetooth menu.5. When the “Ye!! – BTS301” appears on the device list of your device, select “Ye!! – BTS301”. The status indicator turns solid blue after paired.Example: iPad / iPhone / iPod TouchPress Settings > General > Bluetooth > Bluetooth ON > Ye!! – BTS301 > PairExample: Android 4.3 Jelly Bean SmartphonePress Settings > Bluetooth ON > Scan > Ye!! – BTS301 > Settings > Check the Media audio boxReconnecting Bluetooth DeviceKeep in mind that the Bluetooth Speaker has a 10 meter range in open eld. If you move out of range or turn off the Bluetooth feature on your Bluetooth device, the Bluetooth Speaker will disconnect from your device. To reconnect, simply follow the instruction in the “Getting Connected” section.Changing Connected Bluetooth Device1. Disable the Bluetooth function of your Bluetooth device.2. The Bluetooth Speaker can now be connected to the different Bluetooth device.3. Following the instructions in the “Getting Connected” sectionPlay Audio from Non-Bluetooth DeviceSpecicationsTroubleshootingNo connection between Bluetooth Speaker and your Bluetooth device.• Make sure the Bluetooth Speaker is fully charged• Make sure the BT mode is switched on.• Make sure your Bluetooth device is available and supports Bluetooth Advance Audio Distribution prole.• Make sure the Bluetooth Speaker is within range of your Bluetooth device.Audio is not coming out from the Bluetooth Speaker after Bluetooth device successfully paired.• Make sure the Bluetooth device volume is set to a comfortable listening level.Audio is not coming out from the Bluetooth Speaker after the non-Bluetooth device connected with the aux in cable.1. Connect the Bluetooth Speaker and your non-Bluetooth audio device via the 3.5 mm cable. The speaker is ready to play music.CMYCMMYCYCMYK
FCC NOTE： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Navigation menu