Advance Bright BTS301 Portable Bluetooth Speaker User Manual BTS301 IM OP
Advance Bright Limited Portable Bluetooth Speaker BTS301 IM OP
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3353869 |
| Application ID | Z08loqZmLqaiegKkKdcgwA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 71.9kB (898756 bits) |
| Date Submitted | 2017-04-11 00:00:00 |
| Date Available | 2017-04-11 00:00:00 |
| Creation Date | 2016-08-16 15:38:39 |
| Producing Software | Adobe PDF library 9.90 |
| Document Lastmod | 2017-04-11 17:51:25 |
| Document Title | BTS301 IM OP |
| Document Creator | Adobe Illustrator CS5.1 |
220mm (H) x 270mm (W) 4. On your Bluetooth music device, turn on Bluetooth and scan for devices in its Bluetooth menu. 5. When the “Ye!! – BTS301” appears on the device list of your device, select “Ye!! – BTS301”. The status indicator turns solid blue after paired. LED Indicators Indicator Status RED Charging GREEN Fully Charged BLUE Paired FLASHING BLUE Pairing Mode Example: iPad / iPhone / iPod Touch Press Settings > General > Bluetooth > Bluetooth ON > Ye!! – BTS301 > Pair How to Charge Stellar 1. Plug the Stellar into your computer or USB compatible wall charger via the included Micro USB Cable. 2. When the Stellar is fully charged, disconnect the cable. Note: Approximately 3 - 4 hours required for full charge. Battery will last up to 6 hours when connected wirelessly and up to 8 hours when connected through Line-in. USB Compatible Wall charger (not included) or Stellar | BTS301 Computer (not included) Portable Bluetooth Speaker with Lighting User Manual Mood Light CM Using Stellar MY CY CMY Included In This Package • • • • • Stellar Micro USB Cable 3.5mm AUX Cable Wrist Strap User Manual Overview Power & Pairing Button Volume & Play Button Flashlight & Mood Light Button 1. Twist Stellar to the end of the right hand side and the lantern will turn on. 2. Twist Stellar back to the middle and it will turn off all the light. 3. Click on the flashlight button to turn on/off the flashlight 4. Long press the flashlight and mood light button to turn on/off the mood light. 5. While in mood light mode, click the flashlight and mood light button to hold/cancel your desired color. Getting Connected Power & Pairing Button LED Indicator Micro USB Power Input Stellar allows you to play your music in two different ways. Bluetooth Pairing Front View Twist-to-Use Lantern (With brightness control) Back View Line-in 1. Long press the power & pairing button. 2. The speaker is discoverable and ready for pairing. 3. The status indicator blinks blue. 220mm (H) x 270mm (W) Example: Android 4.3 Jelly Bean Smartphone Press Settings > Bluetooth ON > Scan > Ye!! – BTS301 > Settings > Check the Media audio box Reconnecting Bluetooth Device • Keep in mind that the Bluetooth Speaker has a 10 meter range in open field. If you move out of range or turn off the Bluetooth feature on your Bluetooth device, the Bluetooth Speaker will disconnect from your device. To reconnect, simply follow the instruction in the “Getting Connected” section. • Changing Connected Bluetooth Device 1. Disable the Bluetooth function of your Bluetooth device. 2. The Bluetooth Speaker can now be connected to the different Bluetooth device. 3. Following the instructions in the “Getting Connected” section Play Audio from Non-Bluetooth Device Safety Information Read all information and warning before the use of this product. Improper use of this product may lead to product damage. You (the buyer) other than the dealer will be held liable for such as overheat, toxic fume, fire or explosion. • • • • 1. Connect the Bluetooth Speaker and your non-Bluetooth audio device via the 3.5 mm cable. The speaker is ready to play music. Specifications MY CY CMY • • • • CM Model No. BTS301 Output Power 3W Flashlight Distance 20 meters Input Voltage DC 5V / 1A Input Wireless Bluetooth & 3.5mm wired auxiliary Playback Time Up to 6 hours on Bluetooth Bluetooth Version Bluetooth 2.1 with EDR Operating Distance Up to 33 feet (10 metres) Dimensions 180 x D72 mm Weight 371 grams Make sure the 3.5 mm is correctly and firmly connected to the Bluetooth Speaker and non-Bluetooth device. Make sure the non-Bluetooth device is set to a comfortable listening level. • Do not attempt to charge the speaker by using any other method other than USB Power Adapter or computer. To reduce the risk of fire or electric shock, do not expose the speaker to rain or moisture while charging. The speaker should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on or near it while being charged or charging other devices. As with any electronic products, use care not to spill liquids into any part of the product. Liquids can cause a failure and/or a fire hazard. Do not place any flame sources, such as lighted candles, on or near the speaker. Do not expose the speaker to excessive heat, including direct sunlight or fire or the like. Make no modifications to the product or accessories. If the battery begins to leak, do not allow the liquid to come in contact with your skin or eyes. If contact has been made, wash the affected area with plenty of water and seek medical attention immediately. Do not step on, throw, or drop the speaker, or expose it to a strong shock. Do not attempt to service the speaker yourself. Opening or removing covers may expose you to dangerous voltages or other hazards and will void the manufacturer’s warranty. To prevent risk of fire or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles. Precautions 1. The radio waves emitted by the Bluetooth Speaker and Bluetooth device can affect operation of nearby electronics including medical devices. 2. Keep the unit in a cool, dry place. For more information, please visit www.yelltowin.com Troubleshooting No connection between Bluetooth Speaker and your Bluetooth device. • Make sure the Bluetooth Speaker is fully charged • Make sure the BT mode is switched on. • Make sure your Bluetooth device is available and supports Bluetooth Advance Audio Distribution profile. • Make sure the Bluetooth Speaker is within range of your Bluetooth device. Audio is not coming out from the Bluetooth Speaker after Bluetooth device successfully paired. • Make sure the Bluetooth device volume is set to a comfortable listening level. Audio is not coming out from the Bluetooth Speaker after the non-Bluetooth device connected with the aux in cable. Designed by Ye!! in Hong Kong Made in China FCC NOTE： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2016:08:16 15:38:39+08:00 Creator : Adobe Illustrator CS5.1 Modify Date : 2017:04:11 17:51:25+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : BTS301 IM OP Metadata Date : 2017:04:11 17:51:25+08:00 Creator Tool : Adobe Illustrator CS5.1 Thumbnail Width : 152 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 15099 bytes, use -b option to extract) Instance ID : uuid:bde7408c-8669-41b0-9a8d-8309af73d810 Document ID : xmp.did:B26F05A77B63E611ABD7F5F3BAB842F8 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:f79a85db-8d93-41e0-91ed-cdce6f7b4494 Derived From Document ID : xmp.did:F77F1174072068118083E0CA342CE55C Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:F77F1174072068118083E0CA342CE55C, xmp.iid:B26F05A77B63E611ABD7F5F3BAB842F8 History When : 2016:04:28 10:09:47+08:00, 2016:08:16 15:38:33+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CS5.1 History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : P:\Art Group\Ye!!\Ye!! Models\BTS301\BTS301 IM\screenshot\2C (200).jpg, P:\Art Group\Ye!!\Ye!! Models\BTS301\BTS301 IM\screenshot\2E .jpg, \\Hkdc01\Public\Art Group\Ye!!\Ye!! Models\BTS301\BTS301 IM\screenshot\2B.jpg, \\Hkdc01\Public\Art Group\Ye!!\Ye!! Models\BTS301\BTS301 IM\screenshot\2A.jpg, P:\Art Group\Ye!!\Ye!! Models\BTS301\BTS301 IM\screenshot\1E.jpg, P:\Art Group\Ye!!\Ye!! Models\BTS301\BTS301 IM\screenshot\1D.jpg, \\Hkdc01\Public\Art Group\Ye!!\Ye!! Models\BTS301\BTS301 IM\screenshot\1C.jpg, \\Hkdc01\Public\Art Group\Ye!!\Ye!! Models\BTS301\BTS301 IM\screenshot\1B.jpg, \\Hkdc01\Public\Art Group\Ye!!\Ye!! Models\BTS301\BTS301 IM\screenshot\1A.jpg, \\Hkdc01\Public\Art Group\Ye!!\Ye!! Models\BTS301\BTS301 IM\BTS301 PRD.psd Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 270.001435 Max Page Size H : 219.999319 Max Page Size Unit : Millimeters Font Name : MyriadPro-Bold, MyriadPro-Semibold, MyriadPro-Regular, HelveticaNeueLT-Black, HelveticaNeue Font Family : Myriad Pro, Myriad Pro, Myriad Pro, HelveticaNeue LT 95 Black, HelveticaNeue Font Face : Bold, Semibold, Regular, Regular Font Type : Open Type, Open Type, Open Type, TrueType, Unknown Font Version : Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 6.1; 2002, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895 Font Composite : False, False, False, False, False Font File Name : MyriadPro-Bold.otf, MyriadPro-Semibold.otf, MyriadPro-Regular.otf, , MyriadPro-Regular.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Hexachrome Cyan C Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 9.90 Page Count : 3EXIF Metadata provided by EXIF.tools