Advance Bright BTS301 Portable Bluetooth Speaker User Manual BTS301 IM OP
Advance Bright Limited Portable Bluetooth Speaker BTS301 IM OP
User Manual
220mm (H) x 270mm (W)
Power & Pairing Button
Volume & Play Button Flashlight & Mood
Light Button
Micro USB
Power Input
Line-in
Twist-to-Use Lantern
(With brightness control)
LED Indicator
• Make sure the 3.5 mm is correctly and rmly connected to the
Bluetooth Speaker and non-Bluetooth device.
• Make sure the non-Bluetooth device is set to a comfortable
listening level.
Safety Information
Read all information and warning before the use of this product.
Improper use of this product may lead to product damage. You (the
buyer) other than the dealer will be held liable for such as overheat,
toxic fume, re or explosion.
• Do not attempt to charge the speaker by using any other method
other than USB Power Adapter or computer.
• To reduce the risk of re or electric shock, do not expose the
speaker to rain or moisture while charging.
• The speaker should not be exposed to dripping or splashing, and
objects lled with liquids, such as vases, should not be placed on or
near it while being charged or charging other devices. As with any
electronic products, use care not to spill liquids into any part of the
product. Liquids can cause a failure and/or a re hazard.
• Do not place any ame sources, such as lighted candles, on or near
the speaker.
• Do not expose the speaker to excessive heat, including direct
sunlight or re or the like.
• Make no modications to the product or accessories.
• If the battery begins to leak, do not allow the liquid to come in
contact with your skin or eyes. If contact has been made, wash the
affected area with plenty of water and seek medical
attention immediately.
• Do not step on, throw, or drop the speaker, or expose it to
a strong shock.
• Do not attempt to service the speaker yourself. Opening or
removing covers may expose you to dangerous voltages or other
hazards and will void the manufacturer’s warranty. To prevent risk
of re or electric shock, avoid overloading wall outlets, extension
cords, or integral convenience receptacles.
Precautions
1. The radio waves emitted by the Bluetooth Speaker and Bluetooth
device can affect operation of nearby electronics including
medical devices.
2. Keep the unit in a cool, dry place.
For more information, please visit www.yelltowin.com
Designed by Ye!! in Hong Kong
Made in China
RED
GREEN Fully Charged
Indicator Status
BLUE
FLASHING BLUE
Charging
Paired
Pairing Mode
Stellar | BTS301
Portable Bluetooth Speaker with Lighting
User Manual
Included In This Package
• Stellar
• Micro USB Cable
• 3.5mm AUX Cable
• Wrist Strap
• User Manual
Overview
LED Indicators
How to Charge Stellar
1. Plug the Stellar into your computer or USB compatible wall
charger via the included Micro USB Cable.
2. When the Stellar is fully charged, disconnect the cable.
Note: Approximately 3 - 4 hours required for full charge. Battery
will last up to 6 hours when connected wirelessly and up to 8
hours when connected through Line-in.
Using Stellar
1. Twist Stellar to the end of the right hand side and
the lantern will turn on.
2. Twist Stellar back to the middle and it will turn off all the light.
3. Click on the ashlight button to turn on/off the ashlight
4. Long press the ashlight and mood light button to turn on/off
the mood light.
5. While in mood light mode, click the ashlight and mood light
button to hold/cancel your desired color.
Getting Connected
Bluetooth Pairing
1. Long press the power & pairing button.
2. The speaker is discoverable and ready for pairing.
3. The status indicator blinks blue.
Power & Pairing Button
4. On your Bluetooth music device, turn on Bluetooth and
scan for devices in its Bluetooth menu.
5. When the “Ye!! – BTS301” appears on the device list of your device,
select “Ye!! – BTS301”. The status indicator turns solid blue after paired.
Example: iPad / iPhone / iPod Touch
Press Settings > General > Bluetooth > Bluetooth ON >
Ye!! – BTS301 > Pair
Example: Android 4.3 Jelly Bean Smartphone
Press Settings > Bluetooth ON > Scan > Ye!! – BTS301 > Settings >
Check the Media audio box
Reconnecting Bluetooth Device
Keep in mind that the Bluetooth Speaker has a 10 meter range in open
eld. If you move out of range or turn off the Bluetooth feature on your
Bluetooth device, the Bluetooth Speaker will disconnect from your
device. To reconnect, simply follow the instruction in the “Getting
Connected” section.
Changing Connected Bluetooth Device
1. Disable the Bluetooth function of your Bluetooth device.
2. The Bluetooth Speaker can now be connected to
the different Bluetooth device.
3. Following the instructions in the “Getting Connected” section
Play Audio from Non-Bluetooth Device
Specications
Troubleshooting
No connection between Bluetooth Speaker and your Bluetooth device.
• Make sure the Bluetooth Speaker is fully charged
• Make sure the BT mode is switched on.
• Make sure your Bluetooth device is available and supports
Bluetooth Advance Audio Distribution prole.
• Make sure the Bluetooth Speaker is within range of your
Bluetooth device.
Audio is not coming out from the Bluetooth Speaker after Bluetooth
device successfully paired.
• Make sure the Bluetooth device volume is set to
a comfortable listening level.
Audio is not coming out from the Bluetooth Speaker after the
non-Bluetooth device connected with the aux in cable.
Back View
Front View
Computer
(not included)
USB Compatible
Wall charger
(not included)
or
Mood
Light
Stellar allows you to play
your music in two
different ways.
C
M
Y
CM
MY
CY
CMY
K
220mm (H) x 270mm (W)
Model No.
Output Power
Flashlight Distance
Input Voltage
Input
Playback Time
Bluetooth Version
Operating Distance
Dimensions
BTS301
3W
20 meters
DC 5V / 1A
Wireless Bluetooth & 3.5mm wired auxiliary
Up to 6 hours on Bluetooth
Bluetooth 2.1 with EDR
Up to 33 feet (10 metres)
180 x D72 mm
Weight 371 grams
• Make sure the 3.5 mm is correctly and rmly connected to the
Bluetooth Speaker and non-Bluetooth device.
• Make sure the non-Bluetooth device is set to a comfortable
listening level.
Safety Information
Read all information and warning before the use of this product.
Improper use of this product may lead to product damage. You (the
buyer) other than the dealer will be held liable for such as overheat,
toxic fume, re or explosion.
• Do not attempt to charge the speaker by using any other method
other than USB Power Adapter or computer.
• To reduce the risk of re or electric shock, do not expose the
speaker to rain or moisture while charging.
• The speaker should not be exposed to dripping or splashing, and
objects lled with liquids, such as vases, should not be placed on or
near it while being charged or charging other devices. As with any
electronic products, use care not to spill liquids into any part of the
product. Liquids can cause a failure and/or a re hazard.
• Do not place any ame sources, such as lighted candles, on or near
the speaker.
• Do not expose the speaker to excessive heat, including direct
sunlight or re or the like.
• Make no modications to the product or accessories.
• If the battery begins to leak, do not allow the liquid to come in
contact with your skin or eyes. If contact has been made, wash the
affected area with plenty of water and seek medical
attention immediately.
• Do not step on, throw, or drop the speaker, or expose it to
a strong shock.
• Do not attempt to service the speaker yourself. Opening or
removing covers may expose you to dangerous voltages or other
hazards and will void the manufacturer’s warranty. To prevent risk
of re or electric shock, avoid overloading wall outlets, extension
cords, or integral convenience receptacles.
Precautions
1. The radio waves emitted by the Bluetooth Speaker and Bluetooth
device can affect operation of nearby electronics including
medical devices.
2. Keep the unit in a cool, dry place.
For more information, please visit www.yelltowin.com
Designed by Ye!! in Hong Kong
Made in China
Included In This Package
• Stellar
• Micro USB Cable
• 3.5mm AUX Cable
• Wrist Strap
• User Manual
Overview
LED Indicators
How to Charge Stellar
1. Plug the Stellar into your computer or USB compatible wall
charger via the included Micro USB Cable.
2. When the Stellar is fully charged, disconnect the cable.
Note: Approximately 3 - 4 hours required for full charge. Battery
will last up to 6 hours when connected wirelessly and up to 8
hours when connected through Line-in.
Using Stellar
1. Twist Stellar to the end of the right hand side and
the lantern will turn on.
2. Twist Stellar back to the middle and it will turn off all the light.
3. Click on the ashlight button to turn on/off the ashlight
4. Long press the ashlight and mood light button to turn on/off
the mood light.
5. While in mood light mode, click the ashlight and mood light
button to hold/cancel your desired color.
Getting Connected
Bluetooth Pairing
1. Long press the power & pairing button.
2. The speaker is discoverable and ready for pairing.
3. The status indicator blinks blue.
4. On your Bluetooth music device, turn on Bluetooth and
scan for devices in its Bluetooth menu.
5. When the “Ye!! – BTS301” appears on the device list of your device,
select “Ye!! – BTS301”. The status indicator turns solid blue after paired.
Example: iPad / iPhone / iPod Touch
Press Settings > General > Bluetooth > Bluetooth ON >
Ye!! – BTS301 > Pair
Example: Android 4.3 Jelly Bean Smartphone
Press Settings > Bluetooth ON > Scan > Ye!! – BTS301 > Settings >
Check the Media audio box
Reconnecting Bluetooth Device
Keep in mind that the Bluetooth Speaker has a 10 meter range in open
eld. If you move out of range or turn off the Bluetooth feature on your
Bluetooth device, the Bluetooth Speaker will disconnect from your
device. To reconnect, simply follow the instruction in the “Getting
Connected” section.
Changing Connected Bluetooth Device
1. Disable the Bluetooth function of your Bluetooth device.
2. The Bluetooth Speaker can now be connected to
the different Bluetooth device.
3. Following the instructions in the “Getting Connected” section
Play Audio from Non-Bluetooth Device
Specications
Troubleshooting
No connection between Bluetooth Speaker and your Bluetooth device.
• Make sure the Bluetooth Speaker is fully charged
• Make sure the BT mode is switched on.
• Make sure your Bluetooth device is available and supports
Bluetooth Advance Audio Distribution prole.
• Make sure the Bluetooth Speaker is within range of your
Bluetooth device.
Audio is not coming out from the Bluetooth Speaker after Bluetooth
device successfully paired.
• Make sure the Bluetooth device volume is set to
a comfortable listening level.
Audio is not coming out from the Bluetooth Speaker after the
non-Bluetooth device connected with the aux in cable.
1. Connect the Bluetooth Speaker
and your non-Bluetooth audio
device via the 3.5 mm cable.
The speaker is ready
to play music.
C
M
Y
CM
MY
CY
CMY
K
FCC NOTE：
This device complies with Part 15 of the FCC
Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
THE MANUFACTURER IS NOT
RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS OR
CHANGE TO THIS EQUIPMENT. SUCH
MODIFICATIONS OR CHANGE COULD
VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct
the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the
equipment and receiver.
-- Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced
radio/TV technician for help.
To maintain compliance with FCC’s RF
exposure guidelines, this equipment should
be installed and operated with a minimum
distance of 20cm between the radiator and
your body.