Advance Security R51 Car Alarm Receiver User Manual CPL 100 manual

Advance Security Inc Car Alarm Receiver CPL 100 manual

Manual

CPL100 MANUALPROGRAMMING SPECIFICATIONSTransmitter Programming1. Ignition ON2. Press and Hold Override Button for 10"3. Parking Lights will flash and horn will honk 3 timesSelectable Feature Programming1. Ignition ON2. Press and Hold Override Button for 10"3. Parking Lights will flash and horn will honk 3 times4. Press and release programming button5. Parking lights will flash and horn will honk 4 times to acknowledge feature programmingSelectable Feature Chart LED flash 1 LED flash 2 LED flash 3Security Function ON offPassive Locks On Off2 stage unlock 2 stage 1 stagePassive Arming on offEntry Delay on offSiren/ Horn siren hornDoor trigger delay instant 30 secondChirps On OffExtended Locks 0.9 3 double pulse U/LIgnition Lock On OffTan wire Output Trunk 2nd Unlock illuminated EntryUnlock Sense Input NEG POSHorn output timing 16ms 30ms 45msITS Functionality off OnChanging Selectable Feature ProgramingOnce you have entered selectable feature programming (4 chirps)Press override button to scroll through options, each press of the override button advances you to thenext option. The system will honk the horn and flash the lights for each feature. For example when theuser is in Feature 3 the system will horn 3 times and parking lights will flash 3 times. The LED willflash the setting that the system is currently set to.To change a desired feature press the button located on the module. The LED will change its numberof flashes to represent the setting.This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions.1)•This device may not cause harmful interference, and2)•This device must accept any interference received, including interference that may cause undesired operation.Per FCC 15.21, you are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
Defaulting Selectable Features1. Ignition ON2. Press and Hold Override Button for 10"3. Parking Lights will flash and horn will honk 3 times4. Press button on Module5. System will default all setting and honk 4 times which will place the user at the selectablefeature programming bankAdjusting the Shock Sensor1. Turn the adjustment screw clockwise (increasing sensitivity)2. Turn the adjustment screw counter clockwise (decreasing sensitivity)Testing the Shock SensorArm the alarm. Wait for 6" for the zone to stabilize, and then firmly strike the vehicle's bumper.LOT MODE PROGRAMMING SPECIFICATIONS:Transmitter Programming1. Ignition ON2. Press and Hold Override Button for 10"3. Parking Lights will flash and horn will honk 3 times4. Punch in Vehicle ID from ACM Keypad and press LOCK5. System will chirp 3 times to acknowledge LOT MODESelectable Feature Programming1. Ignition ON2. Press and Hold Override Button for 10"3. Parking Lights will flash and horn will honk 3 times4. Press and release programming button5. Parking lights will flash and horn will honk 4 times to acknowledge feature programmingLOT MODE defaults feature ChartLED flash 1 LED flash 2 LED flash 3Security Function ON offPassive Locks On Off2 stage unlock 2 stage 1 stagePassive Arming on offEntry Delay on offSiren/ Horn siren hornDoor trigger delay instant 30 secondChirps On OffExtended Locks 0.9 3 double pulse U/LIgnition Lock On OffTan wire Output Trunk 2nd Unlock illuminated EntryUnlock Sense Input NEG POSHorn output timing 16ms 30ms 45msITS Functionality off On

Navigation menu