Advance Security R51 Car Alarm Receiver User Manual CPL 100 manual

Advance Security Inc Car Alarm Receiver CPL 100 manual

Manual

Download: Advance Security R51 Car Alarm Receiver User Manual CPL 100 manual
Mirror Download [FCC.gov]Advance Security R51 Car Alarm Receiver User Manual CPL 100 manual
Document ID781287
Application ID+/cH3gG1VRyl9UIAF/gbsg==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize7.25kB (90598 bits)
Date Submitted2007-04-17 00:00:00
Date Available2007-04-17 00:00:00
Creation Date2007-04-11 14:16:06
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2007-04-11 14:33:25
Document TitleCPL-100 manual.xls
Document CreatorAcrobat PDFMaker 7.0.7 for Excel
Document Author: USER

CPL100 MANUAL
PROGRAMMING SPECIFICATIONS
Transmitter Programming
1. Ignition ON
2. Press and Hold Override Button for 10"
3. Parking Lights will flash and horn will honk 3 times
Selectable Feature Programming
1. Ignition ON
2. Press and Hold Override Button for 10"
3. Parking Lights will flash and horn will honk 3 times
4. Press and release programming button
5. Parking lights will flash and horn will honk 4 times to acknowledge feature programming
Selectable Feature Chart
Security Function
Passive Locks
2 stage unlock
Passive Arming
Entry Delay
Siren/ Horn
Door trigger delay
Chirps
Extended Locks
Ignition Lock
Tan wire Output
Unlock Sense Input
Horn output timing
ITS Functionality
LED flash 1
ON
On
2 stage
on
on
siren
instant
On
0.9
On
Trunk
NEG
16ms
off
LED flash 2
off
Off
1 stage
off
off
horn
30 second
Off
Off
2nd Unlock
POS
30ms
On
LED flash 3
double pulse U/L
illuminated Entry
45ms
Changing Selectable Feature Programing
Once you have entered selectable feature programming (4 chirps)
Press override button to scroll through options, each press of the override button advances you to the
next option. The system will honk the horn and flash the lights for each feature. For example when the
user is in Feature 3 the system will horn 3 times and parking lights will flash 3 times. The LED will
flash the setting that the system is currently set to.
To change a desired feature press the button located on the module. The LED will change its number
of flashes to represent the setting.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions.
1)•This device may not cause harmful interference, and
2)•This device must accept any interference received, including interference that may cause undesired operation.
Per FCC 15.21, you are cautioned that changes or modifications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.
Defaulting Selectable Features
1. Ignition ON
2. Press and Hold Override Button for 10"
3. Parking Lights will flash and horn will honk 3 times
4. Press button on Module
5. System will default all setting and honk 4 times which will place the user at the selectable
feature programming bank
Adjusting the Shock Sensor
1. Turn the adjustment screw clockwise (increasing sensitivity)
2. Turn the adjustment screw counter clockwise (decreasing sensitivity)
Testing the Shock Sensor
Arm the alarm. Wait for 6" for the zone to stabilize, and then firmly strike the vehicle's bumper.
LOT MODE PROGRAMMING SPECIFICATIONS:
Transmitter Programming
1. Ignition ON
2. Press and Hold Override Button for 10"
3. Parking Lights will flash and horn will honk 3 times
4. Punch in Vehicle ID from ACM Keypad and press LOCK
5. System will chirp 3 times to acknowledge LOT MODE
Selectable Feature Programming
1. Ignition ON
2. Press and Hold Override Button for 10"
3. Parking Lights will flash and horn will honk 3 times
4. Press and release programming button
5. Parking lights will flash and horn will honk 4 times to acknowledge feature programming
LOT MODE defaults feature Chart
LED flash 1
Security Function
ON
Passive Locks
On
2 stage unlock
2 stage
Passive Arming
on
Entry Delay
on
Siren/ Horn
siren
Door trigger delay
instant
Chirps
On
Extended Locks
0.9
Ignition Lock
On
Tan wire Output
Trunk
Unlock Sense Input
NEG
Horn output timing
16ms
ITS Functionality
off
LED flash 2
off
Off
1 stage
off
off
horn
30 second
Off
Off
2nd Unlock
POS
30ms
On
LED flash 3
double pulse U/L
illuminated Entry
45ms

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2007:04:11 14:16:06+08:00
Modify Date                     : 2007:04:11 14:33:25+08:00
Tagged PDF                      : Yes
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creation Date                   : 2007:04:11 14:16:06+08:00
Mod Date                        : 2007:04:11 14:33:25+08:00
Author                          : USER
Creator Tool                    : Acrobat PDFMaker 7.0.7 for Excel
Metadata Date                   : 2007:04:11 14:33:25+08:00
Document ID                     : uuid:a3b4937d-277b-462b-9803-dc06ae120ebc
Instance ID                     : uuid:c2fbede5-f40b-4734-9928-26a85f2d446e
Format                          : application/pdf
Title                           : CPL-100 manual.xls
Creator                         : USER
Page Count                      : 2
Page Layout                     : SinglePage
Has XFA                         : No
EXIF Metadata provided by EXIF.tools
FCC ID Filing: H5OR51

Navigation menu