Advance Security R52 Car Alarm Receiver User Manual AX901 owners revA

Advance Security Inc Car Alarm Receiver AX901 owners revA

Contents

User manual 2 of 2

1IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual isapplicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETYPRECAUTIONS may not apply. Please see your installing dealer for more information.PROPLMOwner's Manual Keyless Entry UpgradeSecurity System
2Table of ContentsFeatures and Benefits............................................................... 3System Functions ...................................................................... 4Arming the systemPre-arm modeDisarming the systemUsing valet modeWhen Your Security System is Triggered ............................... 4When Your Security System is Triggered, Continued ............ 5Attempted Intrusion identificationEmergency Disarm Procedure................................................. 5Basic Troubleshooting .............................................................. 5Warranty .................................................................................... 6
3Features and Benefits Two Easy-to-Use Weather-Resistant Remote ControlsThe upgrade security system utilizes your factory keyless entry remote controls and adds a completevehicle security system while retaining factory functions. All Entrances ProtectedOpening any door or entrance protected by the security system triggers the vehicle’s horn and flashes theparking lights. Starter DisableThe PROPLM Security System protects your vehicle from theft by disabling the starter when the system isarmed. Interior Theft SensorThis sensor guards against vehicle body damage, theft of vehicle equipment (such as air bags), andpersonal belongings inside the vehicle. Interior Status IndicatorThe LED warning light is an effective visual deterrent to a would-be thief.IMPORTANT NOTE: The operation of the PROPLM Security System as described in this manual is applicable to mostvehicles. However, due to the engine type and configuration of some vehicles, some functions AND/OR SAFETYPRECAUTIONS may not apply. Please see your installing dealer for more information.
4System Functions Arming the Security SystemTo arm the system, exit the vehicle, close all doors, then press the LOCK button on your keyless entryremote control. The system will flash the parking lights 2 times, indicating the system is armed, andactivated the starter disable feature. The status indicator (LED warning light) will blink steadily, once persecond. Pre-arm ModeIf the system sounds 1 time and the parking lights flash only 1 time, this indicates that the vehicle’sinterior light is on or an entrance is left open. Check to see that all doors hood and trunk are closedproperly. Once all entrances are secured (and the interior light is off), this system will sound/flashagain. The system is now fully armed. (If the entrance is not secured within 4 minutes, the system willarm and ignore the unsecured entrance until it is closed.) Disarming the Security SystemTo disarm the system press the UNLOCK button. The system will flash the parking lights 1 time. Using Valet ModeTo engage valet mode:1. Turn the ignition key ON/OFF, ON/OFF, ON/OFF.2. The LED will flash 2 times quickly then pause indicating that the system is invalet mode.When valet mode is activated all security functions will be disabled.To disengage valet mode:1. Turn the ignition key ON/OFF, ON/OFF, ON/OFF.2. The LED will turn off indicating that the system has exited valet mode.When Your Security System is TriggeredThe PROPLM Security System will trigger if one of the following events occurs while the system is armed:•Any protected entrance is opened.•The vehicle ignition is turned on.•The vehicle is jolted hard enough to signal the impact sensor.Once the alarm is triggered, the horn will sound and the vehicles parking lights will flash for 30 seconds.The system will then re-arm, awaiting the next intrusion attempt.
5When Your Security System is Triggered, Continued Attempted Intrusion IdentificationPressing UNLOCK after a full 30 second trigger cycle has completed, the horn will honk 4 times and theLED will flash a number of times to indicate which input triggered the alarm. Turning on the ignition orpressing the valet/override button will reset the LED flashes, pressing the valet/override button will alsohonk the horn to match the LED flashes before it resets.Number of flashes:1 - Interior Theft Sensor (Shock Sensor)2 - Door Input3 - Hood Input4 - Trunk Input5 - IgnitionEmergency Disarm ProcedureIf your remote control is lost or fails to function, use this procedure to disarm the MM1 Security Systemand start your vehicle.1 - Use the keys to enter the vehicle. The alarm will sound once the door is opened.2 - Insert the key into the ignition and turn to the ON position.3 - Locate and press the emergency override button. The alarm will turn off and then you will be able to start the vehicle.Your Emergency Override Button is Located:_________________________________________Basic Trouble ShootingSymptom Problem SolutionRemote does not work: Weak or dead battery. Change battery.System will not arm: Door or entrance is open. Close entrance.Courtesy light is on. Turn courtesy light off.System is in Valet mode. Exit Valet mode.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions. 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Per FCC 15.21, you are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.

Navigation menu