Advance Security TR12 Car Alarm Transceiver User Manual

Advance Security Inc Car Alarm Transceiver Users Manual

a href="https://usermanual.wiki/Advance-Security" itemprop="url"> Advance Security >

Users Manual

PROGRAMMABLE OPTIONS You can program multiple options in one session if you start with the lowest option and continue on to higher options [if needed] without repeating steps #1-3 below. For example, you can follow the programming steps to change Option #2 to “OFF” by pressing the lock button on the remote, then you can continue pressing the program button additional times to get to a high number option and change the setting without having to repeat Steps 1-5. You can only go from low to higher option numbers in one session. To Engage Option Programming: 1. Open hood (ground the Blue wire if no hood pin switch is installed) 2. Turn Key to the ON position 3. Press program / valet button 5 times, after a few seconds the unit will flash the lights 5 times. 4. Push the valet/program button [again] the number of times that corresponds to the option number desired (1 thru 20). You must get a light flash after each button press. See chart on next page for option list. 5. When you reach the desired programming level, Press button #1, #2, #3 or #4 to change the option. 6. Turn Ignition OFF, Close hood and check for changed features. Change each option individually repeating #1-5.
PROGRAMMABLE OPTION RESET This system provides a reset method to restore all options to FACTORY DEFAULT VALUES as listed in the “Button #2” column of the programmable option chart on pages 18-19. This can be helpful if you have lost track of the option settings on your system, or when you are moving the system from car to car and want a “clean slate”. 1. Open hood (ground the Blue Hood Switch Wire if no hood pin is installed) 2. Turn Key to the ON position 3. Press program / valet button 5 times, after a few seconds the unit will flash the lights 5 times. 4. Push the valet/program button 25 times. Press carefully, do not lose count! You must get a light flash each time you press the button. If the unit didn’t flash the lights, then the system did not register your press. PROGRAMMABLE OPTION TABLE Option # CS-2205 Alarm Function TX Button #1 TX Button #2 TX Button #3 TX Button #4 1 Horn Pulse Door & Hood Trigger Only *All Functions No Warn-A-Way No Arm/Disarm Pulse 2 Auto lock with Ignition OFF *ON = Lock/Unlock Lock Only Unlock Only 3 Passive/Active Arming ON = Passive Arm *OFF = Active Arm 4 Active Re-Arm ON *OFF 5 Passive Locks ON *OFF 6 Parking Lights on w/Disarm OFF *ON 7 Arm with Ignition ON OFF *ON (Sensors off with Ignition On) ON (Sensors on with Ignition ON)
Download:
Mirror Download [FCC.gov]
Document ID529547
Application ID8PXLdu7yC/yFzCnucgrOGg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize2.84kB (35525 bits)
Date Submitted2005-04-07 00:00:00
Date Available2005-04-07 00:00:00
Creation Date2005-04-06 11:27:44
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2005-04-06 11:27:44
Document TitleUsers Manual
FCC ID Filing: H5OTR12

Navigation menu