Advance Security TR18 Car Alarm Transceiver User Manual CARLINK IVU MANUAL

Advance Security Inc Car Alarm Transceiver CARLINK IVU MANUAL

Users Manual

 1 CARLINK IVU OPERATION MANUAL         HHU CPU: 28pin 2K ROM SIZE. HT48R30A SSOP         IVU CPU: 14pin 1K ROM SIZE. PIC16F630 SOP 1. Transmitter programming: It only retain 4 transmitter programmed. If the memory is exceeded, the system will start to delete transmitters from memory in chronological order. 2-WAY 46-BIT (HOPPING  CODE.)   Hold SW in IVU until LED flashing (0.25” ON,0.25”OFF), you are in the transmitter programming mode. Within 5", press BTN in TX1, LED on 1”; press BTN in TX2,LED on 2”..indicating the signal have been stored into memory. Transmitter Button System Function Remark  Lock Doors & Arm System      Unlock Doors & Disarm System     (1.5-second) Trunk Release Press and Hold for 1.5 seconds.  Car Locator    Panic Function Press and Hold for 3 seconds.  Activate or Turn Off The Remote Start Operate as manual       NOTE: a. 2 code must be the same, then you can use.             b. Example:2-WAY 46 bit, when you use. Compare with hopping code is necessary.             c. RF DECODE :               1. Decode as following: 1) Each Bit must shorter than 3000us. 2) 0000, FFFF without decode               3)Compare Code with EEprom. d. exit: leave it for 5”  .  2.HHU reaction 2.1 LOCK: 1 CHIRP, LOCK ICON ON   2.2 UNLOCK: 2 CHIRP, UNLOCK ICON ON 2.3 TRUNK: MELODY, TRUNK ICON ON 2.4 REMOTE START: 1 CHIRP, START ICON FLASH 2.5 REMOTE STOP: 3 CHIRP, START ICON OFF 2.6 CAR LOCATOR: MELODY, CALRLOCATOR ICON ON 2.7 PANIC: MELODY, PANIC ICON ON  3.HHU after 2”,LCD OFF, it is SLEEP MODE, it doesn’t accept any commend.         REMOTE START as well.
 2 4.Relationship between TRUNK & Remote Start :  4.1 It will send code twice while open TRUNK & REMOTE START, CODE(A) -> LOW 2”  -> CODE(B)  4.2 While Remote Start, press STRAT BTN, it will Turn Off The Remote Start  5.  (IVU TO X-LINK ) DBI Digital Commands Commands Alarm Functions FE44 1111 1110  0100 0100 LOCK FUNCTION LOCK FROM REMOTE FE90 1111 1110  1001 0000 UNLOCK FUNCTION UNLOCK FROM REMOTE FEB8 FE30 1111 1110  1011 1000 (A) 1111 1110  0011 0000 (B) TRUNK FUNCTION TRUNK FROM REMOTE FE44 FE14 1111 1110  0100 0100 (A) 1111 1110  0001 0100 (B) REMOTE START FUNCTION REMOTE START FROM REMOTE FEE4 1111 1110  1110 0100 REMOTE STOP FUNCTION REMOTE STOP FROM REMOTE FED8 1111 1110  1101 1000 CAR LOCATOR FUNCTION CAR LOCATOR FROM REMOTE FED4 1111 1110  1101 0100 PANIC FUNCTION PANIC FROM REMOTE
 3  This device complies with part 15 of the FCC rules.  Operation is subject to the following two conditions. 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation.  Per FCC 15.21, you are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.

Navigation menu