Advance Security TR18 Car Alarm Transceiver User Manual CARLINK IVU MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	674078
Application ID	CuDntaY7FGOQrVHMeJc6Hg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.42kB (30238 bits)
Date Submitted	2006-06-27 00:00:00
Date Available	2006-06-27 00:00:00
Creation Date	2006-06-27 16:59:56
Producing Software	Acrobat PDFWriter 5.0Windows NT ª©
Document Lastmod	0000-00-00 00:00:00
Document Title	CARLINK IVU MANUAL.doc
Document Creator	CARLINK IVU MANUAL - Microsoft Word
Document Author:	wendy

CARLINK IVU
OPERATION MANUAL
HHU CPU: 28pin 2K ROM SIZE. HT48R30A SSOP
IVU CPU: 14pin 1K ROM SIZE. PIC16F630 SOP
1. Transmitter programming: It only retain 4 transmitter programmed. If the memory is
exceeded, the system will start to delete transmitters from memory in chronological order.
2-WAY 46-BIT (HOPPING CODE.)
Hold SW in IVU until LED flashing (0.25” ON,0.25”OFF), you are in the transmitter
programming mode. Within 5", press BTN in TX1, LED on 1”; press BTN in TX2,LED on
2”..indicating the signal have been stored into memory.
Transmitter
System Function
Remark
Button
Lock Doors & Arm System
Unlock Doors & Disarm System
Trunk Release
Press and Hold for 1.5
seconds.
(1.5-second)
Car Locator
Panic Function
Press and Hold for 3 seconds.
Activate or Turn Off The Remote Start Operate as manual
NOTE: a. 2 code must be the same, then yo u can use.
b. Example:2-WAY 46 bit, when you use. Compare with hopping code is
necessary.
c. RF DECODE :
1. Decode as following:
1) Each Bit must shorter than 3000us.
2) 0000, FFFF without decode
3)Compare Code with EEprom.
d. exit: leave it for 5” .
2.HHU reaction
2.1 LOCK: 1 CHIRP, LOCK ICON ON
2.2 UNLOCK: 2 CHIRP, UNLOCK ICON ON
2.3 TRUNK: MELODY, TRUNK ICON ON
2.4 REMOTE START: 1 CHIRP, START ICON FLASH
2.5 REMOTE STOP: 3 CHIRP, START ICON OFF
2.6 CAR LOCATOR: MELODY, CALRLOCATOR ICON ON
2.7 PANIC: MELODY, PANIC ICON ON
3.HHU after 2”,LCD OFF, it is SLEEP MODE, it doesn’t accept any commend.
REMOTE START as well.
4.Relationship between TRUNK & Remote Start :
4.1 It will send code twice while open TRUNK & REMOTE START, CODE(A) -> LOW 2” ->
CODE(B)
4.2 While Remote Start, press STRAT BTN, it will Turn Off The Remote Start
5. (IVU TO X-LINK )
Digital Commands
DBI
FE44
FE90
Commands
1111 1110 0100 0100 LOCK
1111 1110 1001 0000 UNLOCK
1111 1110 1011 1000
FEB8
(A)
FE30 1111 1110 0011 0000
(B)
1111 1110 0100 0100
FE44
(A)
FE14 1111 1110 0001 0100
(B)
1111 1110 1110 0100
FEE4
TRUNK
REMOTE
START
Alarm Functions
FUNCTION LOCK FROM
REMOTE
FUNCTION UNLOCK
FROM REMOTE
FUNCTION TRUNK
FROM REMOTE
FUNCTION REMOTE
START FROM REMOTE
REMOTE STOP FUNCTION REMOTE
STOP FROM REMOTE
1111 1110 1101 1000 CAR LOCATOR FUNCTION CAR
FED8
LOCATOR FROM
REMOTE
1111 1110 1101 0100 PANIC
FUNCTION PANIC FROM
FED4
REMOTE
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions.
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may
cause undesired operation.
Per FCC 15.21, you are cautioned that changes or modifications not expressly approved
by the part responsible for compliance could void the user’s authority to operate the
equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 3
Creator                         : CARLINK IVU MANUAL - Microsoft Word
Create Date                     : 2006:06:27 16:59:56
Title                           : CARLINK IVU MANUAL.doc
Author                          : wendy
Producer                        : Acrobat PDFWriter 5.0Windows NT ª©

EXIF Metadata provided by EXIF.tools