Advance Security TR21 Car Alarm Transceiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	752046
Application ID	F2ohz/VQBJR1yrrwLe4YAQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	35.02kB (437809 bits)
Date Submitted	2007-01-29 00:00:00
Date Available	2007-01-29 00:00:00
Creation Date	2007-01-08 14:31:06
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2007-01-24 19:30:08
Document Title	untitled

TRX970
OPERATION MANUAL
REMOTE TRANSCEIVER (TX)
A. OLED DISPLAY
Name of Transmitter
Timer
Door Lock
In – Range Indicator
Door Unlock
Alarm Status
Temperature
Car Jacking
Bypass Shock
Sensor (Zone 4)
Battery Level
Engine Running
Melody Mode
Count Down Timer
Parking Timer
Vibration Mode
Alert Alarm
Timer Start
Antenna
switch
button
OLED Display
switch
Engine Running
Button
Button 1
Button
Button 2
Button
Button 3
Button
Button 4
Reset Hole
I n case the remote transceiver malfunction,
errors or freeze of display, it is recommended
to reset your remote transceiver.
B. CHARGE THE BATTERY
Power by built-in 3.7V lithium polymer battery, if the OLED screen
display low battery or
is flash, charge your remote
transceiver. While the battery of the Remote Transceiver is under
the battery charging, you can push the ” ” button to check
charging condition.
AC Power Supply
The remote transceiver equipped AC POWER SUPPLY /
AC ADAPTOR (Output Voltage: 4.2VDC – 5.5VDC and
with same USB plug), then you can charge the battery
indoors.
While the battery of
the Remote
Transceiver is under
charging.
Push the
button; the
screen will display
Battery charging.
C. SELECT THE TRANSCEIVER’S BUTTON CONFIGURATION:
Switch to select the transceiver button configuration you need and the OLED screen
1. Spin up the
will display the transceiver button configuration you select.
2. Within 5 seconds press the button 1, 2, 3 or 4 to remote control “button configuration” you selected.
button, the transceiver button configuration mode
Note: If 5 seconds of inactivity expired, or push the
will exit.
Spin up the
switch
to the page 1
Spin up the
to the page 5
Spin up the
switch
Spin up the
to the page 2
switch
Spin up the
switch
to the page 6
Spin up the
switch
to the page 4
to the page 3
switch
Spin up the
switch
resume to main page.
D. SELECT THE TRANSCEIVER FEATURES:
1. Spin down the Switch to select the transceiver feature you need and the OLED screen will display
the features you select.
2. Press the button 1, 2, 3 or 4 once within 3 seconds after finished selection and the OLED screen will
change the display alternatively.
button, the transceiver features program mode will
Note: If 5 seconds of inactivity expire, or push the
exit.
Spin down the
switch
to the page 1
Spin down the
switch
Spin down the
to the page 2
Spin down the
switch
to the page 5
Spin down the
switch
to the page 3
switch
Spin down the
Spin down the
switch
to the page 4
switch
resume to main page.
to the page 6
E- P1- 1. “BUTTON BI” SETTING: Example: Set the “Button Bi Disable”.
It has a short “bi” sound while pressing the button of the remote transceiver
Spin down the
switch
to the page 1
E- P1- 2. “BUTTON LOCK” SETTING:
Spin down the
switch
to the page 1
Press the button 2 to
change the setting
Press the button 1 and it
will display previously
setting
Example: Set the “Button Lock Enable”.
Press the button 1 to
change the setting
Press the button 2 and it
will display previously
setting
E- P1- 3. “MELODY / VIBRATION MODE” SETTING:
Spin down the
to the page 1
switch
Press the
button and
the setting is done.
Example: set the Vibration mode.
Press the button 2 to
change the setting
Press the button 3 and it
will display previously
setting
Press the
button and
the setting is done.
Press the
button and
the setting is done also
the
icon will display
on the OLED screen
E- P1- 4. “DEMO MODE”:
Spin down the
switch
Demo movie playing
Press the button 4 to
exit.
start Demo movie
to the page 1
Press the any Button to
E- P2- 1. “POWER SAVE” SETTING: Example set the “Power Save Enable”.
While the power save mode, the LCD remote transceiver uses “0” current to save the battery power.
Spin down the
switch
to the page 2
Press the button 1 to
change the setting.
Press the button 1 and it
will display previously
setting.
Press the
button and
the setting is done.
E- P2- 2. “PARKING METER” SETTING: Example set the “Parking Meter 30 min..
Note: When “parking meter” trigger presses any button to stop the beeper.
Spin down the
switch
Press the button 1 three
times to set the parking
timer to 30 minutes.
Press the button 2
to the page 2
D- P2- 3. “PARKING AREA” SETTING:
Spin down the
switch
to the page 2
Press the button 1 and
the “-” flashes for
setting.
Press the
button to
start the parking meter
and the
icon will
flash on the main page.
Example set the “Parking Area.” to “B120
Press the button 3, it will
display previously
parking area
Spin down the
Press the button 2 to
clear the parking area,
and the “-” flashes for
setting.
switch
to set the “1”
Press the button 1 and
the “-” flashes for
setting.
Spin up the
switch to
setting the “B”
Spin down the
switch to set the “2”.
Press the button 1 and
the “-” flashes for
setting.
Spin down the
switch
to set the “0”.
Press the button 3 and
the setting is done.
D- P2- 4. “LIGHTING FOR OLED” TIMER SETTING: Example: set the OLED display from 2 seconds to 3
seconds.
Spin down the
switch
to the page 2
Press the button 4 and it
will display previously
setting
D- P3- 1. “TIMER” SETTING:
Spin down the
switch
to the page 3
Press the button 2 to
set the “minute” digit to
“20”
Press the button 2 to
change the setting
Press the
button and
the setting is done.
Example set the timer to 08:20P
Press the button 2 to set
the ”hours” digit to “08”
Press the button 1 and
the ”hour” digit flashes
for adjusting.
Press the button 1 and
the ”A” digit flashes for
adjusting.
Press the button 2 to
set the “P”
Press the button 1 and
the ”minute” digit flashes
for adjusting.
Press the button 3 and
the setting is done.
D- P3- 2. “ALERT ALARM TIMER” SETTING: Example set alert alarm timer to 06:30A
Note: When alert alarm timer trigger press any button to stop the beeper.
Spin down the
to the page 3
switch
Press the button 2 and
the ”hour” digit flashes
for adjusting.
Press the button 2 to set
the ”hour” digit to “06”.
Press the button 1 and
the ”minute” digit flashes
for adjusting.
Press the button 2 to
set the ”minute” digit to
“30”.
Press the button 3 to
set the alert alarm timer
and the
icon will
flash on the main page.
Push the
button
Press the button 2 to
set off the alert alarm
timer or press any
button to stop alarm
while alert alarm timer
trigger
While the icon is
flashing or When alert
alarm timer trigger, the
screen will display alert
alarm timer
C- P3- 3. “COUNT DOWN TIMER” SETTING: Example set the count down timer to 2:30
Note: When count down timer is trigger, press any button to stop the beeper.
Spin down the
switch
to the page 3
Press the button 2 to
set the ”minute” digit to
“30”.
Press the button 3 to
start the count down
switch
to the page 3
Press the button 2 to
set the ”minute” digit to
“00”
Press the button 1 and
the ”minute” digit flashes
for adjusting.
Press the button 2 to
set off the count down
time.
While the
icon is
flashing push the ” ”
button to display the
count down timer
timer and the
icon
will flash on the main
page.
C- P3- 4. “DAILY START TIMER” SETTING:
Spin down the
Press the button 2 to set
the ”hour” digit to “02”
Press the button 3 and
the ”hour” digit flashes
for adjusting.
Example set the Daily Start Timer to 05:00A
Press the button 4 and
the ”hours” digit flashes
for adjusting.
Press the button 2 to set
the ”hours” digit to “05”.
Press the button 3 and the
setting is done. The
icon will flash on the main
page.
Press the button 1 and
the ”minute” digit flashes
for adjusting.
While the
icon is
flashing push the ” ”
button to check the daily
start timer
D- P4- 1. “NAME OF TX ” SETTING:
Spin down the
switch to the
page 4
Press the button 1
and the “-” flashes
for setting.
Example Set Name of Transceiver 1 to MIKE
Press the button1
and the “-” flashes
for setting.
Spin down the
switch to set the
“M”.
Press the button 1
and the “-” flashes
for setting.
Spin up the ”
switch to set
the ”I”.
Spin down the
Press the button 1
and the “-” flashes
for setting.
Spin up the
switch to set
the ”E”.
Press the button 3
and the setting is
done.
switch to set
the ”K”.
D- P5- 1. “NAME OF CHANNEL ” SETTING:
Spin down the
switch to the page
Example Set Name of channel 4 to GARAGE DOOR
Press the button 1
and the “-” flashes
for setting.
Spin up the
switch to set
the ”G”.
Press the button 1
and the “-” flashes
for setting.
Press the button 1
and the “-” flashes
for setting.
Spin down the
switch to set
the ”R”
Press the button 3
and the setting is
done.
Following the
above step to
setting
Alphabetical to
GARAGE
DOOR
D- P6- 1. LANGUAGE SETTING:
Spin down the
to the page 6
switch
Example set the Language to English
Press the button 1 to set the
Language to ”ENGLISH”.
Press the
button and
the setting is done.
Spin down the
switch to setting
the ”A”.
D- P6- 4. SET TO DEFAULTS:
Spin down the
switch
Press the button 1 & 2
at same time to set the
defaults.
Press the button 4.
to the page 6
OPERATION:
A. REMOTE TRANSMITTER OPERATION:
Transmitter Button
(3-second)
(2-second)
(2-second)
II
System Function
Lock Doors & Arm System / Button 1
Arm and Bypass The Zone 4.
Arm System and Hidden Alarm Function
Car Locator
Panic function
Silent Arming / Disarming
Active Anti Car-Jacking Mode
Remark
Press twice within 3 seconds
Press within 3 seconds
Upon armed
Press and Hold for 3 seconds.
Ignition in "off" position.
Ignition in "on" position press and
hold for 2 seconds
Unlock Doors & Disarm System / Button 2
Two Steps Door Unlock & Disarm System
Trunk Release
Trunk Release (Channel 3)
Passive Arming By-pass
Turn Off The Remote Start / Button 4
Activate The Remote Start
Channel # 4 Timer Output
Channel # 5 Timer Output
Channel # 6 Timer Output
Press and Hold for 2 seconds
While the system Disarmed.
Press twice within 3 seconds.
Switching code For 2nd Car Operation.
For regular remote transmitter
Button Function Selection
Confirm Button / Back to Main Page
For Two way Remote transceiver
For Two way Remote transceiver
Feature Selection
For Two way Remote transceiver
Press twice within 3 seconds.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions.
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
Per FCC 15.21, you are cautioned that changes or modifications not expressly approved by the part responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2007:01:24 19:30:08+08:00
Create Date                     : 2007:01:08 14:31:06+08:00
Page Count                      : 9
Has XFA                         : No
About                           : uuid:8df2fa5c-8028-45ed-a23d-b29a1a302aca
Producer                        : Acrobat Distiller 6.0 (Windows)
Mod Date                        : 2007:01:24 19:30:08+08:00
Creation Date                   : 2007:01:08 14:31:06+08:00
Metadata Date                   : 2007:01:24 19:30:08+08:00
Document ID                     : uuid:44d8e9e4-7cff-42ff-a992-5f52a3602d23
Format                          : application/pdf
Title                           : untitled

EXIF Metadata provided by EXIF.tools