Advanced Card Systems ACR1283L Contactless Smart Card Reader and Writer User Manual ACR1283L

Advanced Card Systems Limited Contactless Smart Card Reader and Writer ACR1283L

Users Manual

Subject to change without prior notice info@acs.com.hkwww.acs.com.hk Prepared by: Reviewed by: Approved by: Document Name: ACR1283L User Manual.doc ACR1283L User Manual V1.00.00
Document Title Here Document Title Here Document Title Here ACR1283L Design Specification Version 1.00.00 Page 2 of 10info@acs.com.hkwww.acs.com.hkVersion History Date By Changes Version2012-1-4 Vincent Zhong Lampard Ou Kit Au • First Release 1.00.00 • • • • •
Document Title Here Document Title Here Document Title Here ACR1283L Design Specification Version 1.00.00 Page 3 of 10info@acs.com.hkwww.acs.com.hkTable of Contents 1.0. Introduction ...............................................................................................................4 2.0. Features .....................................................................................................................5 3.0. Architecture...............................................................................................................6 4.0. Connection with computer.......................................................................................7 4.1. plug the ACR1283 to a computer USB port, it is just providing the power for ACR1283......7 4.2. No driver is required ..............................................................................................................8 4.3. When you put a contactless card on the reader, the green LED will be on. .........................8
Document Title Here Document Title Here Document Title Here ACR1283L Design Specification Version 1.00.00 Page 4 of 10info@acs.com.hkwww.acs.com.hk1.0. Introduction ACR1283L is a PC-linked reader with 1 contactless interface, 4 SAM interface
Document Title Here Document Title Here Document Title Here ACR1283L Design Specification Version 1.00.00 Page 5 of 10info@acs.com.hkwww.acs.com.hk2.0. Features • Plug and play USB with 12Mbps； • Complies with PCSC/CCID standard ； • Complies with ISO 7816 part 1 to 4 for all SAM slots； • Supports the following Tag Types: o MIFARE Classic. E.g. MIFARE 1K, 4K, MINI and Ultralight ； o ISO14443-4 Type A； o ISO14443-4 Type B； • Upgrade firmware through USB interface； • Programmable by end user； • User-controllable peripherals, e.g. LED, Buzzer • Reading range for contactless tag is about 4 -5 cm, depend on card type and environment ； • Support encryption algorithms, e.g. DES、3DES、AES;
Document Title Here Document Title Here Document Title Here ACR1283L Design Specification Version 1.00.00 Page 6 of 10info@acs.com.hkwww.acs.com.hk3.0. Architecture SCM32 is for main processor for communication with PC, and control the contactless chip, communication with AT90 with connect with SAM card and peripherals. RC531 act as a contactless chip to perform the communication between contactless tags and SCM32
Document Title Here Document Title Here Document Title Here ACR1283L Design Specification Version 1.00.00 Page 7 of 10info@acs.com.hkwww.acs.com.hk4.0. Connection with computer 4.1. Plug the ACR1283L to a computer USB port, it is just providing the power for ACR1283L
Document Title Here Document Title Here Document Title Here ACR1283L Design Specification Version 1.00.00 Page 8 of 10info@acs.com.hkwww.acs.com.hk4.2. No driver is required, When you put a contactless card on the reader, the green LED at the “Ready” logo will flash
Document Title Here Document Title Here Document Title Here ACR1283L Design Specification Version 1.00.00 Page 9 of 10info@acs.com.hkwww.acs.com.hk4.3. When you put a mifare card on it, you will hear a beep sound and the green LED will be highlighted, the UID will be shown on APDU program
Document Title Here Document Title Here Document Title Here ACR1283L Design Specification Version 1.00.00 Page 10 of 10info@acs.com.hkwww.acs.com.hk Warning： Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.

Navigation menu