Advanced Card Systems ACR1283L Contactless Smart Card Reader and Writer User Manual ACR1283L
Advanced Card Systems Limited Contactless Smart Card Reader and Writer ACR1283L
Users Manual
ACR1283L User Manual V1.00.00 Document Name: ACR1283L User Manual.doc Prepared by: Reviewed by: Approved by: info@acs.com.hk Subject to change without prior notice www.acs.com.hk Version History Date By Changes Version Vincent Zhong 2012-1-4 Lampard Ou • First Release 1.00.00 Kit Au • • • • • Page 2 of 10 ACR1283L Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk Table of Contents 1.0. Introduction ............................................................................................................... 4 2.0. Features ..................................................................................................................... 5 3.0. Architecture ............................................................................................................... 6 4.0. Connection with computer ....................................................................................... 7 4.1. 4.2. 4.3. plug the ACR1283 to a computer USB port, it is just providing the power for ACR1283......7 No driver is required ..............................................................................................................8 When you put a contactless card on the reader, the green LED will be on. .........................8 Page 3 of 10 ACR1283L Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk 1.0. Introduction ACR1283L is a PC-linked reader with 1 contactless interface, 4 SAM interface Page 4 of 10 ACR1283L Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk 2.0. Features • • • • • • • • • Plug and play USB with 12Mbps; Complies with PCSC/CCID standard ; Complies with ISO 7816 part 1 to 4 for all SAM slots; Supports the following Tag Types: o MIFARE Classic. E.g. MIFARE 1K, 4K, MINI and Ultralight ; o ISO14443-4 Type A; o ISO14443-4 Type B; Upgrade firmware through USB interface; Programmable by end user; User-controllable peripherals, e.g. LED, Buzzer Reading range for contactless tag is about 4 -5 cm, depend on card type and environment ; Support encryption algorithms, e.g. DES、3DES、AES; Page 5 of 10 ACR1283L Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk 3.0. Architecture SCM32 is for main processor for communication with PC, and control the contactless chip, communication with AT90 with connect with SAM card and peripherals. RC531 act as a contactless chip to perform the communication between contactless tags and SCM32 Page 6 of 10 ACR1283L Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk 4.0. Connection with computer 4.1. Plug the ACR1283L to a computer USB port, it is just providing the power for ACR1283L Page 7 of 10 ACR1283L Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk 4.2. No driver is required, When you put a contactless card on the reader, the green LED at the “Ready” logo will flash Page 8 of 10 ACR1283L Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk 4.3. When you put a mifare card on it, you will hear a beep sound and the green LED will be highlighted, the UID will be shown on APDU program Page 9 of 10 ACR1283L Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Page 10 of 10 ACR1283L Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2012:05:10 20:10:26+08:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2012:05:10 20:10:26+08:00 Format : application/pdf Title : Microsoft Word - ACR1283L User Manual.doc Creator : a Document ID : uuid:4b3d597d-d36b-49bc-82e7-5d74c960fdb8 Instance ID : uuid:34c2b233-7dca-4de5-91dd-c058a824de86 Page Count : 10 Author : aEXIF Metadata provided by EXIF.tools