Advantech Co RSB-4760 Motherboard User Manual x
Advantech Co Ltd Motherboard x
Users Manual revised
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3642588 |
| Application ID | Mf6Q9a36gd74KT55G3kVdg== |
| Document Description | Users Manual revised |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 47.83kB (597912 bits) |
| Date Submitted | 2017-11-17 00:00:00 |
| Date Available | 2018-05-07 00:00:00 |
| Creation Date | 2017-11-07 09:38:29 |
| Producing Software | Gaaiho PDF |
| Document Lastmod | 2017-11-16 15:59:42 |
| Document Title | Microsoft Word - è¦èªž.docx |
| Document Creator | Microsoft Word - è¦èªž.docx |
| Document Author: | Stefanie_Yu |
RSB-4760 Qualcomm ARM® Cortex®-A53 APQ8016 3.5" SBC Features Preliminary Qualcomm ARM® Cortex®-A53 APQ8016 Quad core up to 1.2 GHz Onboard 1GB/2GB LPDDR3 memory and 8GB eMMC 1 HDMI, 1 RS-232/422/485, 1 GbE, 4 USB 2.0, 16 GPIO, 1 I2C, 1 SPI Highly intergrated on-board wireless connectivity - Wi-Fi, BT, and GNSS Connevtivity expansion capability - M.2, mini-PCIe Wide voltage range DC power input Support Android, Linux and Win 10 IoT Core RoHS COMPLIANT 2002/95/EC Introduction RSB-4760 is a RISC 3.5" single board computer (SBC) powered by Qualcomm ARM® Cortex®-A53 APQ8016 processor that supports full HD display and intergrades on board wireless solution – Wi-Fi, BT and GNSS. RSB-4760 also features in mini PCIe, M.2, and SIM card slots for expanding connectivity capability, like 3G, 4G/LTE modules. Equipped with complete Android, Linux and Win10 IoT core BSPs, this SBC enables customers to easily develop unique application on specific OS. Specifications Form Factor Processor System Graphics Ethernet Connectivity CPU Technology Capacity Flash HDMI H/W Video Codec Chipset Speed Wi-Fi Bluetooth GNSS RTC WatchDog Timer Expansion SD socket M.2 mini PCIe SIM SATA SATA Power USB Audio SPDIF Serial Port I/O Power Environment Mechanical Operating System Certifications SPI CAN GPIO I2C System Bus Touch I/R LED Button Power Supply Voltage Power Type Power Consumption Operational Temperature Operating Humidity Dimensions (W x D) 3.5" SBC Quad-core ARM® Cortex® A53 APQ8016 LPDDR3 1066MHz On-board 1GB / 2GB LPDDR3 8GB 1 HDMI, 1920 x 1080 at 60Hz Encode: 30 fps 720p (H.264 Baseline/MPEG-4) 30 fps 1080p (MPEG-4/H.264/VP8/H.263) Decode: 30 fps 1080p (MPEG-4/H.264/H.263/DivX/MPEG2/VC1/Soreson/VP8) Microchip LAN7500 1 10/100/1000 Mbps WCN3620 802.11 b/g/n 2.4GHz WCN3620 Bluetooth 4.1 WGR7640 Yes Yes 1 x SD socket 1 x M.2 2230 Key.E 1 x Full size mini PCIe slot (USB signal only) 1 x mini-SIM slot 2 x USB 2.0 Type A / 2 x USB 2.0 pin header / 1 micro USB client 1 x line-out, 1 x mic-in via pin header 1 x 4 wires RS-232/422/485 via D-SUB 9 1 x 4 wires console via pin header (Configurable for general purpose UART or M.2 UART signal) 8 x GPIO via D-SUB 9 / 8 x GPIO via pin header (3.3V TTL level) 1 x Power LED, 1 x Wi-Fi&BT LED 1 x Power Button, 1 x Reset Button 9-36V DC-in TBD 0 ~ 60° C 5% ~ 95% 102 x 146 mm Android / Yocto Linux / Windows 10 IoT Core CE/FCC Class B Industrial Motherboards & Systems All product specifications are subject to change without notice Last updated: 25-Jan-2017 RSB-4760 Block Diagram LPDDR3 WCN3620 802.11 b/g/n 2.4GHz Bluetooth 4.1 WiFi I/Q + DATA/CLK WGR7640 SSBI + I/Q BT CTRL GNSS SDIO SD Socket I2C 0 Watchdog Timer MIPI-DSI ADI ADV7535 HDMI Conn. UART 0 RS-232/422/485 transceiver DB9(M) Conn. RTC Pin header IC1 Pin header GPIO x 8 Pin header SPI Pin header Audio In/Out Pin header USB 4 & 5 APQ8016 GPIO x 8 DB9(F) Conn. Switch USB USB Client UART 1 JUMPER Pin header eMMC M.2 Conn. PDM Data/Clk Codec PM8916 I2C 2 Microchip USB2517 USB0 Microchip LAN7500 RJ45 USB1 & 2 USB Conn. USB 6 USB3 miniPCIE conn. Ordering Information HDMI LAN 1GB 8GB 2GB 8GB Description RSB-4760 3.5" SBC Exrernal I/O 102 98.70 98 18 3.2 Description Adapter 100-240 36W 12V 3A 9NA0362308 Power cord 3P Europe (WS-010+WS-083) 183 cm Power cord 3P UK 2.5A/3A 250 V 1.83 M Power cord 3P UL 10A 125 V 180 cm Debug cable Debug adapter board RSB-4760 metal chassis 4-Ø .4 Ø6 GPIO 0 ~ 60 °C 0 ~ 60 °C Unit: mm 98.05 92.70 49.69 27.20 20.50 15.50 138.20 142.70 146 3.30 6.50 13 18 27.25 35.85 DC-in 120.30 Port Number 96PSA-A36W12R1 170203183C 170203180A 1700001524 1700026931-01 ROM-ED20-00A1E TBD Operating Temperature Dimensions 4- Optional Accessories SD 97.22 104.25 Part Number RSB-4760 1 x 4 wires RS-232/422/485 1 x 4 wires UART (Console) 1 x 4 wires RS-232/422/485 1 x 4 wires UART (Console) USB Host 142.70 Packing List Serial Port 73.13 RSB-4760CQ-WNA1E Qualcomm APQ8016 Quad Core 1.2GHz Qualcomm APQ8016 Quad Core 1.2GHz Flash 57.84 RSB-4760CQ-QNA1E Memory 60.10 CPU 35.90 Part Number RS-232/422/485 HDMI USB Client Ethernet USB Online Download www.advantech.com/products FCC Federal Communications Commission (FCC) Statement 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter module is authorized only for use in devices where the antenna may be installed such that 20 centimeter may be maintained between the antenna and users. The final end product must be labeled in visible area with the following: “Contains FCC ID: M82-RSB-4760” This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappar eils radio exempts de licence.L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage adioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RF Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This radio transmitter (IC NO.: 9404A-RSB4760) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna Type Frequency Dipole Type external antenna 2.4GHz Peak Antenna Gain (dBi) 2.89 Dipole Type external antenna 2.4GHz 3.50 Dipole Type external antenna Dipole Type external antenna 2.4GHz 2.4GHz 2.89 2.93 This transmitter module is authorized only for use in devices where the antenna may be installed such that 20 centimeter may be maintained between the antenna and users. The final end product must be labeled in visible area with the following: “Contains IC: 9404A-RSB4760”
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Stefanie_Yu Create Date : 2017:11:07 09:38:29+08:00 Modify Date : 2017:11:16 15:59:42+08:00 XMP Toolkit : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08 Producer : Gaaiho PDF Creator Tool : Microsoft Word - 警語.docx Metadata Date : 2017:11:16 15:59:42+08:00 Format : application/pdf Title : Microsoft Word - 警語.docx Creator : Stefanie_Yu Document ID : uuid:25cc70d4-dfe2-4ffa-a936-7c064ac89883 Instance ID : uuid:8a553198-e0d6-43a0-8e58-c628b9bc5ddc Page Mode : UseNone Page Count : 4EXIF Metadata provided by EXIF.tools