AeroScout TAG3200 AeroScout T3s WiFi Tag - TAG-3200-CU User Manual T14 Tag User Guide
AeroScout AeroScout T3s WiFi Tag - TAG-3200-CU T14 Tag User Guide
Users Manual
T3s Staff Tag USER GUIDE REV1.0 Disclaimer The information and know-how included in this document are the exclusive property of STANLEY Healthcare and are intended for the use of the addressee or the user alone. The addressees shall not forward to another their right of using the information, know-how or document forwarded herewith, in whole or in part in all matters relating or stemming from or involved therein, whether for consideration or without consideration, and shall not permit any third party to utilize the information, know -how or the documents forwarded herewith or copies or duplicates thereof, unless at the company’s consent in advance and in writing. Any d istribution, advertisement, copying or duplication in any form whatsoever is absolutely prohibited. The Company reserves the right to sue the addressee, user and/or any one on their behalves, as well as third parties, in respect to breaching its rights pertaining to the intellectual rights in particular and its rights of whatever kind or type in the information, know-how or the documents forwarded by them herewith in general, whether by act or by omission. This document is confidential and proprietary to STANLEY Healthcare and is not to be distributed to any persons other than licensed AeroScout Visibility System users or other persons appointed in writing by STANLEY Healthcare. Trademark Acknowledgements AeroScout is a trademark of Stanley Black & Decker, Inc. or its affiliates. Other brand products and service names are trademarks or registered trademarks of their respective holders. Below is a partial listing of other trademarks or registered trademarks referenced herein: Cisco™ is a trademark of Cisco Systems, Inc. Sun, Sun Microsystems, the Sun Logo, Java, JRE and all other Sun trademarks, logos, product names, service names, program names and slogans that are referred to or displayed in this document are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. This product includes software developed by the Apache Software Foundation (http://www.apache.org/). This product includes code licensed from RSA Data Security Esper is a trademark of EsperTech, Inc. Jboss is a trademark of Red Hat Middleware, LLC. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. MS SQL Server 2005 and MS SQL Server 2008 are registered trademarks of Microsoft Corporation in the United States and/or other countries. JasperSoft, the JasperSoft Logo, JasperReports, the JasperReports logo, JasperIntelligence, JasperDecisions, JasperAnalysis, Scope Center, Scope Designer, and JasperServer are trademarks or registered trademarks of JasperSoft, Inc. in the United States and other countries. Images of PLUM A+™, PLUM A+™ 3, LIFECARE PCA™, and SYMBIQ™ infusion systems are provided with permission of Hospira, Inc. All rights reserved. ©2014 STANLEY Healthcare. All rights reserved. T3s Staff Tag Table of Contents Overview........................................................................................................................ 4 Tag Descriptions ........................................................................................................... 5 T3s Tag Features............................................................................................................ 5 Attachment Options ..................................................................................................... 7 Tag Management .......................................................................................................... 7 LED and Buzzer Indications ........................................................................................ 7 Tag Maintenance........................................................................................................... 8 Tag Battery Life.......................................................................................................... 8 Changing the Battery ................................................................................................ 9 Cleaning the Tag ........................................................................................................ 9 T3s Tag Model............................................................................................................... 9 Tag Accessories ........................................................................................................... 10 Specifications .............................................................................................................. 10 Tag Specifications .................................................................................................... 10 Safety, Warnings and Warranty ................................................................................ 12 User Guide T3s Staff Tag REVISION HISTORY Revision Date Comments Author 19 January 2014 New Document K Oberstein 10 March 2014 Update K Oberstein User Guide T3s Staff Tag Overview The T3s Tag is based on STANLEY Healthcare’s market leading T2 Wi-Fi Tag, with its proven usability, dependability and scalability. These battery-powered tags are worn by hospital staff. This enables staff to be accurately located in real-time and in any environment – from indoor locations such as hospital floors to open outdoor spaces such as parking lots. In addition, the same tag can be used for egress point detection, room and bay level location, call-button alerting, motion sensing, hand hygiene monitoring, patient flow and more. Figure 1: T3s Tag User Guide T3s Staff Tag Tag Descriptions The following describes the parts of the T3s Tag: Front View Flange LED Call Button Back View Ultrasound Battery Cover Retractable Reel socket Attachment Plate Figure 2: Tag Descriptions T3s Tag Features Wi-Fi Compatibility T3s Tags use any standard Wi-Fi network infrastructure, keeping costs low and making deployments simple and fast. The tags can be used to determine the location and status of hospital staff. The Tags’ wireless messages are received by Wi-Fi access points. User Guide T3s Staff Tag Long Battery Life The T3s Tag has a single, replaceable battery. The tag is able to report its battery level to MobileView. The T3s Tag also has a motion sensor to conserve battery life when the tag is not in motion. Room-Level Separation and Egress Point Detection The T3s Tag includes embedded Low-Frequency (LF) receiver and an optional Ultrasound receiver. Ultrasound signals do not go through walls and thus ensure accurate room-level resolution when and where required (e.g. determining if a nurse is attending to a patient in a room). T3s Tags also provide instant notification when a tagged staff member passes through a gate, doorway or other tightly-defined area. Call Button A call button provides the capability to define alerts according to button clicks – such as a staff duress situation requiring immediate assistance or attention. Multiple messages can be set up using different button-click patterns. Motion Sensing T3s Tags contain on-board motion sensors. The motion sensor can be configured to trigger alerts (e.g. when a staff member is not in motion for a long period of time). It also enables different transmission intervals for tags when they are stationary or in motion, which reduces unnecessary network traffic and conserves battery life. Rugged Performance The T3s Tag enclosure is designed for durability against significant impacts and is water and dust resistant. Tag Management T3s Tags are easily configured and activated wirelessly via the Tag Manager application and a Tag Activator device. User Guide T3s Staff Tag Attachment Options The T3s Tag has various attachment options. The tag is fitted with a flange enabling it to be clipped on a pocket, using a badge clip, or it can be worn around a staff member’s neck, using a lanyard. Other attachment options include a retractable reel and retractable reel with back clip. Flange for tag attachment Tag Management T3s Tags are easily configured and activated wirelessly via the Tag Manager application and a Tag Activator device. Please refer to the AeroScout Tag Manager User Guide. LED and Buzzer Indications T3s Tags include a blue LED on the front and a buzzer for audio and visual indications, such as low battery. The buzzer is easily configured for certain alerts in Tag Manager. User Guide T3s Staff Tag Blue LED The following table describes the LED indications for the T3s Tag. LED Indication Description Blue Power Tag Maintenance Tag Battery Life Table 1 presents battery life estimates for a new T3s tag battery. The parameters that affect battery life include the tag transmission interval and the number of transmission channels configured for the tag. Note The calculations in the table below are true for an operating temperature of 20ºC. The calculations do not take into consideration additional factors such as Exciter activations of Tag, since these are individual parameters. User Guide T3s Staff Tag Changing the Battery The T3s Tag contains a 3.6V Lithium ½ AA replaceable battery. To Replace the Battery: 1. Remove the battery cover by unscrewing the two (2) cover screws. 2. Remove the battery. 3. Install a new 3.6V Lithium ½ AA battery in the battery holder. 4. Close and re-screw the panel to the tag casing. WARNING: Used batteries should be disposed of according to facility procedures in your jurisdiction. Cleaning the Tag Cleaning the external surface of the tag’s housings can be done using Alcohol or Chloride based wipers only. T3s Tag Model Tag Model Tag Description SKU:TAG-3200-CU T3s Staff Tag with call button and Ultrasound. User Guide T3s Staff Tag Tag Accessories Accessory Model Retractable reel with back clip SKU: TAC-363 Retractable reel without back clip SKU: TAC-362 Lanyard SKU: TAC-361 Badge Clip SKU: TAC-360 AeroScout Tag Management Suite SKU: BWH-1000-02-TA Specifications Tag Specifications Range Outdoor range: Up to 200m (650 feet) Indoor range: Up to 80m (260 feet) Physical and Mechanical Dimensions (incl. Flange): 80mm x 40.6mm x 20mm (3.14in x 1.60in x 0.8in) Weight (Incl. Retractable reel): 53g (1.86oz) 802.11 radio (2.4 GHz); b/g/n compliant Low frequency receiver for chokepoint detection (125kHz) Transmission power: up to +19dBm (~81mW) Patented clear channel sensing avoids interference with wireless networks Radio Ultrasound Receiver Frequency 40KHZ Environmental Specifications Temperature: 0°C to +50°C (32°F to 122°F) Humidity: 0% to 95% RH non-condensing User Guide 10 T3s Staff Tag Ingress Protection Rating: IP-65 Battery: 3.6V Lithium ½ AA battery (replaceable) Battery life: up to 1 year Programmability Tag configurations Transmission channels IP Settings Certification Radio: FCC Part 15, sub-part C class B, sub-part B EN 300-328, EN 300-330, EN 301-489, RSS 210 (Canada) Safety: CE, cTUVus (EN60950) EN 60601-1-Rev3 User Guide 11 T3s Staff Tag Safety, Warnings and Warranty FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: a) Reorient or relocate the receiving antenna. b) Increase the separation between the equipment and receiver. c) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. d) Consult the dealer or an experienced radio/TV technician. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: a) This device may not cause harmful interference b) This device must accept any interference received, including interference that may cause undesired operation. FCC Warning Modifications not expressly approved by the manufacturer could void the user authority to operate the equipment under FCC Rules. WARNING: This device complies with Part 15 of the FCC Rules and RSS-210 of Industry and Science Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. User Guide 12 T3s Staff Tag Stanley Healthcare (“Stanley”) Standard Warranty and Disclaimer For Stanley Healthcare AeroScout® Products (“Products”) Limited Warranty and Disclaimer. Stanley warrants that commencing from the date of delivery to Customer and continuing for a period of one (1) year thereafter (the “Warranty Period”), the hardware components of Stanley Healthcare AeroScout® Products (the “Hardware”) will be free from defects in material and workmanship under normal use subject to the terms hereof. The date of shipment of the Hardware by Stanley is set forth on the packaging material in which the Hardware is shipped. This limited warranty extends only to the original user of the Hardware. Customer's sole and exclusive remedy and the entire liability of Stanley and its suppliers under this limited warranty will be, at Stanley’s or its service center's option, shipment of replacement Hardware components within the Warranty Period or a refund of the purchase price if the Hardware is returned to the party supplying it to Customer, if different than Stanley, freight and insurance prepaid. Stanley replacement parts used in Hardware repair may be new or equivalent to new, and Stanley reserves the right to provide replacement Hardware components of similar form and function, as long as the functionality is equal or better than Customer’s original Hardware components. Stanley’s obligations hereunder are conditioned upon the return of affected Hardware in accordance with Stanley’s then-current Return Material Authorization (RMA) procedures. Notwithstanding the foregoing, the warranty for TAG Hardware and EXCITER Hardware shall be for a period of three (3) years from the date of delivery. Exclusions: The warranty set forth above will not apply if the Hardware or the Product (i) has been altered, except by Stanley, (ii) has not been installed, operated, repaired, or maintained in accordance with instructions supplied by Stanley, (iii) has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident; or (iv) is provided for beta, evaluation, testing, or demonstration purposes for which Stanley does not receive a payment of purchase price or license fee. In addition, this warranty shall not cover the following: Batteries (other than DOA -Dead On Arrival). Plastics (including defects in appearance, cosmetics, decorative or structural items including framing and non-operative parts). Tag Calibration. Expenses related to removing or reinstalling the Products. Defects or damage that result from the use of Non-Stanley certified Products, Accessories, Software or other peripheral equipment. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Stanley, or its authorized service partners. All software contained in or otherwise part of Stanley Healthcare AeroScout® Products, which is covered by Stanley’s separate software warranty contained in the separate software license agreement with respect to such Products. The warranty set forth above shall not be enlarged and no obligation or liability shall arise out of Stanley’s rendering of technical advice, facilities or service in connection with Customer's purchase of the Stanley Healthcare AeroScout® Products. Except for the foregoing warranties, which shall be the exclusive warranties with respect to any Products, STANLEY MAKES NO WARRANTY OR REPRESENTATION OF ANY KIND, EXPRESS OR IMPLIED, WRITTEN OR ORAL, REGARDING INFORMATION GIVEN OR THE PRODUCTS OR SERVICES SUPPLIED AND EXPRESSLY DISCLAIMS ALL EXPRESS AND IMPLIED User Guide 13 T3s Staff Tag WARRANTIES, REPRESENTATIONS AND CONDITIONS, INCLUDING WITHOUT LIMITATION ALL WARRANTIES AND CONDITIONS OF QUALITY, NON-INFRINGEMENT, MERCHANTABILITY AND SUITABILITY OR FITNESS FOR A PARTICULAR PURPOSE TO THE EXTENT PERMITTED BY LAW. STANLEY WILL NOT BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL, INDIRECT OR PUNITIVE DAMAGES FOR ANY CAUSE OF ACTION, WHETHER IN CONTRACT, TORT OR OTHERWISE. Consequential, incidental and indirect damages include, but are not limited to, lost profits, lost revenue and loss of business opportunity, whether or not Stanley was aware or should have been aware of the possibility of these damages. User Guide 14 About STANLEY Healthcare STANLEY Healthcare provides over 5,000 acute care hospitals and 12,000 long-term care organizations with enterprise solutions that transform safety, security and operational efficiency. The STANLEY Healthcare solution set enables customers to achieve organizational excellence and superior care in five critical areas: Patient Safety, Security & Protection, Environmental Monitoring, Clinical Operations & Workflow and Supply Chain & Asset Management. These solutions are complemented by consulting, training, implementation and integration services. STANLEY Healthcare is proud to be part of Stanley Black & Decker, Inc. For more information, visit www.stanleyhealthcare.com. STANLEY Healthcare 130 Turner Street, Building Building 3 Waltham, MA 02453 Tel: +1-888-622-6992 E-mail: stanleyhealthcare@sbdinc.com Europe, Middle East, Africa Office Tel : +32 2 709 29 49 Fax : +32 15 30 80 99 E-mail: emea@aeroscout.com Japan Office Tel: +81 3 3556 9003 Fax: + 81 3 5875 3723 E-mail: info@aeroscout.co.jp Latin America Office Tel : +52 55 5001 5769 E-mail: latam@aeroscout.com Asia-Pacific Sales Tel : +1 650 596 2994 E-mail: apac@aeroscout.com Australia and New Zealand Sales Tel : +61 3 9038 8690 E-mail: anz@aeroscout.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2014:03:19 14:40:22+02:00 Creator Tool : Microsoft® Word 2010 Modify Date : 2014:03:20 09:53:07+02:00 Metadata Date : 2014:03:20 09:53:07+02:00 Format : application/pdf Creator : Kevin Lee Oberstein Title : T14 Tag User Guide Producer : Microsoft® Word 2010 Document ID : uuid:684956e8-385e-40fc-ae02-1505c938077c Instance ID : uuid:f8366b4c-91c2-4b53-9ae6-76dabfe250fc Page Count : 16 Language : en-US Author : Kevin Lee ObersteinEXIF Metadata provided by EXIF.tools