Aerohive Networks AP1130 Access Point User Manual AP1130 Installation Guide

Aerohive Networks, Inc. Access Point AP1130 Installation Guide

Revised Installation Manual (10/28/2015)

Download: Aerohive Networks AP1130 Access Point User Manual AP1130 Installation Guide
Mirror Download [FCC.gov]Aerohive Networks AP1130 Access Point User Manual AP1130 Installation Guide
Document ID2796143
Application ID4wmLiqkQEffq8M9Fmk0k+A==
Document DescriptionRevised Installation Manual (10/28/2015)
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize240.47kB (3005831 bits)
Date Submitted2015-10-28 00:00:00
Date Available2014-11-25 00:00:00
Creation Date2017-09-07 00:03:19
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-09-07 00:03:19
Document TitleAP1130 Installation Guide
Document CreatorFrameMaker 11.0
Document Author: Aerohive Technical Publications

®
AP1130 Insta lla tio n G uid e
The AP1130 is a multi-c ha nne l wire le ss a c c e ss p o int with a wa te rtig ht c ha ssis tha t c a n b e
d e p lo ye d in virtua lly a ny o utd o o r se tting , inc lud ing e xtre me e nviro nme nts.
This g uid e e xp la ins ho w to insta ll the AP1130 o n a p o le o r fla t surfa c e in virtua lly a ny
o utd o o r se tting , a nd c o nne c t it to Ae ro hive Hive Ma na g e r Ne two rk Ma na g e me nt o ve r the
ne two rk. To re g iste r, g e t the la te st p ro d uc t d o c ume nta tio n, se e c o mp lia nc e info rma tio n,
a nd d o wnlo a d so ftwa re up d a te s, visit www.a e ro hive .c o m/ sup p o rt. Fo r d e ta ile d ha rd wa re
info rma tio n a b o ut this d e vic e , visit www.a e ro hive .c o m/ q uic k.
FC C a nd IC sta te me nts c a n b e fo und o n p a g e 12.
Kit C o nte nts, Re q uire d Ac c e sso rie s, a nd To o ls
The AP1130 kit inc lud e s the ite ms sho wn b e lo w.
Hose clamp
Bracket (1)
Waterproof
Ethernet housing
AP1130
chassis
Four pan head wall
mount screws in the bag
labeled “WALL MOUNT”
Five pan head machine
screws with washers for
pole mount and ground in
bag labelled “POLE MOUNT &
GROUNDING”
Ground cable (1)
To insta ll yo ur AP1130, yo u will ne e d the fo llo wing a c c e sso rie s (o rd e re d se p a ra te ly) a nd to o ls:
•
Two 2.4 G Hz a nte nna s
•
Two 5 G Hz a nte nna s
•
A switc h tha t p ro vid e s Po E p o we r, o r a Po E p ro visio ning d e vic e , a DC b a c kup b a tte ry (re q uire s the
DC p o we r c a b le a c c e sso ry, p a rt numb e r AH-AC C -1130-C BL-DC ), o r so la r p a ne l
•
A shie ld e d c a t5 Ethe rne t c a b le ra te d fo r o utd o o r use ; le ng th no t to e xc e e d 328 fe e t (100 m)
•
Po E Inje c to r (o p tio na l).
•
C ro sshe a d sc re wd rive r fo r p a n he a d sc re ws a nd Re se t b utto n c o ve r
•
Fla t b la d e sc re wd rive r to tig hte n the ho se c la mp
•
Se c urity To rx (p in-in-To rx) sc re wd rive r fo r the c a p tive sc re ws in the mo unting b ra c ke t
P/ N 330205, Re v. A
Ae ro hive Ne two rks
Ha rd wa re C o mp o ne nts
The fo llo wing illustra tio n sho ws the AP1130 ha rd wa re c o mp o ne nts. Fo r d e ta ile d d e sc rip tio ns o f the se
c o mp o ne nts a nd a d d itio na l sp e c ific a tio ns, se e the o nline He lp fo r the AP1130 a t www.a e ro hive .c o m/ q uic k.
Right Panel
Top Panel
5GHz (0)
5GHz (1)
5 GHz
connector
Pressure
vent
2.4 GHz
connector
Reset button
5 GHz
connector
Left Panel
Bottom Panel
Status
2.4GHz (0)
Eth0/PoE+
2.4 GHz Eth0/PoE
connector
12VDC (2.0A)
5 GHz
connector
Reset
2.4 GHz (1)
5 GHz antenna
connector
2.4 GHz
connector
Signal 5GHz 2.4 GHz Ethernet
LED
LED
strength LED LED
12VDC Status 2.4 GHz
(2.0A)
LED
connector
Back Panel
Bracket
mounting hole
Bracket
mounting hole
Bracket
mounting hole
Bracket
mounting hole
Hole for ground
Sa fe ty Instruc tio ns a nd Site Ha za rd Wa rning s
Re a d a nd fo llo w the se sa fe ty instruc tio ns a nd ha za rd wa rning s b e fo re insta lling a n AP1130. Ke e p the se
instruc tio ns fo r future re fe re nc e .
The fo llo wing ic o ns a re use d to id e ntify the typ e o f c a utio n o r wa rning in this d o c ume nt:
This ic o n ind ic a te s a g e ne ra l c a utio n. Fa ilure to c o mp ly with a c a utio n no tific a tio n c a n re sult in d a ma g e to e q uip me nt.
This ic o n ind ic a te s a n e le c tric a l c a utio n. Fa ilure to c o mp ly with a n e le c tric a l no tific a tio n c a n re sult in se rio us injury o r d e a th, a nd
e xte nsive d a ma g e to e q uip me nt.
Re fe r to the fo llo wing c a utio ns a nd wa rning s whe n insta lling yo ur AP1130.
Ae ro hive Ne two rks
Ae ro hive d e vic e s must b e insta lle d b y a p ro fe ssio na l insta lle r who is c e rtifie d to insta ll the se typ e s o f d e vic e s a nd to e nsure tha t the y a re
p ro p e rly g ro und e d a nd me e t a p p lic a b le lo c a l a nd na tio na l e le c tric a l c o d e s. In the Unite d Sta te s o f Ame ric a , wire le ss d e vic e s with N-typ e
c o nne c to rs must b e insta lle d b y a p ro fe ssio na l insta lle r to sa tisfy the FC C a nte nna re q uire me nt fo r a uniq ue c o nne c tio n me tho d .
Do no t insta ll the d e vic e in a n e nviro nme nt whe re the o p e ra ting a mb ie nt te mp e ra ture mig ht e xc e e d the re c o mme nd e d ra ng e s.
To c o mp ly with ra d io fre q ue nc y e xp o sure limits, d o no t p la c e this a nte nna within 26.5" (67 c m) o f a ny p e o p le o r a nima ls.
C ha ng e s o r mo d ific a tio ns ma d e to this d e vic e tha t a re no t e xp re ssly a p p ro ve d b y the p a rty re sp o nsib le fo r c o mp lia nc e c o uld vo id the use r's
a utho rity to o p e ra te the e q uip me nt.
Fo r re lia b le c o nne c tio ns in a ll c o nd itio ns, e sp e c ia lly in we t a nd wind y lo c a tio ns, yo u must use the Ethe rne t c a b le ho using .
Fo r p ro d uc ts a va ila b le in the USA/C a na d a ma rke t, fo r the 2.4 G Hz b a nd , o nly c ha nne ls 1-11 c a n b e o p e ra te d . Se le c tio n o f o the r c ha nne ls is
no t p o ssib le .
Use o nly a tta c hme nts a nd a c c e sso rie s sp e c ifie d b y Ae ro hive .
The se d e vic e s a re no t d e sig ne d o r a p p ro ve d fo r use with p o we r line s o the r tha n 110-120 V o r 220-240 vo lts, 50/60 Hz, sing le p ha se
(d e p e nd ing o n the c o untry in whic h the y a re b e ing use d ). Atte mp ting to use the se d e vic e s o n no n-a p p ro ve d p o we r line s ma y ha ve
ha za rd o us c o nse q ue nc e s.
Do no t p lug the se d e vic e s into a filte re d p o we r strip o r AC line filte r.
The se d e vic e s a re no t inte nd e d fo r use b y p e rso ns (inc lud ing c hild re n) with re d uc e d p hysic a l, se nso ry, o r me nta l c a p a b ilitie s, o r with la c k o f
e xp e rie nc e o f kno wle d g e unle ss the y a re g ive n sup e rvisio n o r instruc tio n c o nc e rning use o f the d e vic e s b y a p e rso n who is re sp o nsib le fo r
the ir sa fe ty. C hild re n sho uld b e sup e rvise d to e nsure tha t the y d o no t p la y with the d e vic e s.
Ele c tro sta tic d isc ha rg e (ESD) c a n d a ma g e e q uip me nt a nd imp a ir e le c tric a l c irc uitry. ESD d a ma g e o c c urs whe n e le c tro nic c o mp o ne nts a re
imp ro p e rly ha nd le d a nd c a n re sult in c o mp le te o r inte rmitte nt fa ilure s. Be sure to fo llo w ESD-p re ve ntio n p ro c e d ure s whe n ha nd ling
e le c tro nic c o mp o ne nts.
Disc o nne c t a ll p o we r b y turning o ff the p o we r switc h a nd unp lug g ing the p o we r c o rd b e fo re insta lling o r re mo ving a d e vic e , o r wo rking
ne a r p o we r sup p lie s.
Re lia b le g ro und ing o f e q uip me nt sho uld b e ma inta ine d . Pa rtic ula r a tte ntio n sho uld b e g ive n to sup p ly c o nne c tio ns o the r tha n d ire c t
c o nne c tio ns to the b ra nc h c irc uit (e .g . use o f p o we r strip s.)
To p ro te c t the AP1130 fro m lig htning , d o no t p la c e it a t the hig he st p o int o f a b uild ing o r struc ture .
During o p e ra tio n, the surfa c e s o f the AP1130 c a n b e c o me ho t. Use c a utio n whe n ha nd ling .
Ma ke sure tha t the AP1130 is c o nne c te d to a suita b ly insta lle d g ro und c o nd uc to r. C o nta c t the a p p ro p ria te e le c tric a l insp e c tio n a utho rity if
yo u a re unc e rta in tha t suita b le g ro und ing is a va ila b le .
Do no t lo c a te the AP1130 e nc lo sure ne a r o ve rhe a d p o we r line s o r o the r e le c tric lig ht o r p o we r c irc uits, o r whe re it c a n c o me into c o nta c t
with suc h c irc uits. During insta lla tio n, e xe rc ise e xtre me c a re no t to c o me into c o nta c t with the se c irc uits, whic h c a n c a use se rio us injury o r
d e a th. Fo r p ro p e r insta lla tio n a nd g ro und ing o f the p ro d uc t, re fe r to na tio na l a nd lo c a l e le c tric a l c o d e s: NFPA (Na tio na l Fire Pro te c tio n
Asso c ia tio n) 70, Na tio na l Ele c tric a l C o d e Artic le 810 (U.S.); C a na d ia n Ele c tric a l C o d e , Pa rt I, C SA 22.1 a nd Se c tio n 54 (C a na d a ); a nd if lo c a l
o r na tio na l e le c tric a l c o d e s a re no t a va ila b le , re fe r to IEC (Inte rna tio na l Ele c tro te c hnic a l C o mmissio n) 364, Pa rt 1 thro ug h 7 (o the r c o untrie s).
Do no t c o nne c t o r d isc o nne c t a nte nna s o r c a b le s fro m the AP1130 d uring p e rio d s o f lig htning a c tivity.
Insta lling the AP1130
Yo u c a n mo unt the AP1130 o utd o o rs o n a ho rizo nta l o r ve rtic a l p o le , o r o n a n ind o o r o r o utd o o r wa ll. Yo u
c a n a d just the o rie nta tio n o f the AP1130 fo r o p timum ra d io tra nsmissio n. Fo r e xa mp le , yo u c a n mo unt the
AP1130 o n a no n-p e ne tra ting ro o f sta nd o r to a Wine g a rd b ra c ke t, o fte n use d fo r mo unting sa te llite d ishe s.
Pe r FC C re q uire me nts, do no t p la c e this a nte nna within 26.5" (70 c m) o f a ny p e o p le o r a nima ls.
To p ro vid e uno b struc te d RF c o ve ra g e , mo unt the AP1130 in a re la tive ly o p e n a re a o n a p o le , ma st, o f fla t
surfa c e so tha t the a nte nna s ha ve a t le a st a thre e -fo o t c le a ra nc e fro m a ny ne a rb y o b struc tio ns.
Ae ro hive Ne two rks
Yo u mu
IMPO RTANT WATERPRO O F C AUTIO NS: It is e xtre me ly imp o rta nt tha t yo u ha ve e ithe r A) the a nte nna s tig htly
insta lle d, o r B) a nte nna c o nne c to r c a p s tig htly insta lle d o n the a nte nna c o nne c to rs whe n a nte nna s a re no t
b e ing use d to e nsure the unit is wa te rp ro o f. Yo u c a n o rde r a nte nna c o nne c to r c a p s fro m Ae ro hive
(AH-AC C -1130-C VR-RF).
Yo u must insta ll the wa te rp ro o f ho using o n the RJ45 c o nne c to r to e nsure a wa te rp ro o f c o nne c tio n. If yo u
a re no t using Ethe rne t c a b le , a lwa ys ke e p the c o ve r o n the RJ45 c o nne c to r to e nsure the de vic e is
wa te rp ro o f.
The DC c o nne c to r c a p must b e insta lle d whe n the c o nne c to r is no t in use to e nsure the de vic e is
wa te rp ro o f.
The re a re no se rvic e a b le p a rts inside the AP1130. Do no t o pe n the c hassis fo r any re aso n. O p e ning the
c ha ssis will c o mp ro mise the wa te rp ro o f se a l a nd vo id the wa rra nty.
Ma ke sure tha t yo u ha ve a ll the ma te ria ls a nd to o ls ne c e ssa ry, a nd fa milia rize yo urse lf with the sa fe ty a nd
site ha za rd wa rning s b e fo re yo u insta ll the d e vic e . The fo llo wing fig ure sho ws a typ ic a l ro o fto p insta lla tio n.
Fo r b e st p e rfo rma nc e , de p lo y AP1130 de vic e s a t le a st 100 fe e t (30.5 m) a p a rt fro m e a c h o the r.
The AP1130 mounted
on a grounded vertical pole.
A shielded Ethernet cable
provides both the network
connection and power
through PoE.
The AP1130 ground
wire is connected to
the grounded pole.
N-type outdoor antennas
Shielded Ethernet cable
Ground wire connected to
grounded pole
Access through roof to
internal connection point.
Po we r C o nne c tio ns
In mo st c a se s, yo u c a n c o nne c t a n Ethe rne t c a b le d ire c tly fro m yo ur AP1130 to a Po E-e na b le d switc h, o r to a
Po E inje c to r insid e the b uild ing . Yo u c a n a lso c o nne c t yo ur AP1130 to a DC p o we r so urc e , suc h a s a b a tte ry
b a c kup o r so la r p a ne l. If yo u a re no t using a Po E-e na b le d switc h, yo u must c o nne c t to a n inte rme d ia ry Po E
inje c to r, the n to yo ur switc h. In c a se s whe re yo ur AP1130 is lo c a te d a sig nific a nt d ista nc e fro m the b uild ing ,
yo u c a n insta ll a n o utd o o r wa te rp ro o f Po E inje c to r, a va ila b le a s a n a c c e sso ry. Fo r mo re info rma tio n a b o ut
Ae ro hive a c c e sso rie s, c o nta c t yo ur Ae ro hive sa le s re p re se nta tive .
Ae ro hive Ne two rks
Ve rtic a l o r Ho rizo nta l Po le Mo unt
The fo llo wing ste p s e xp la in ho w to mo unt the AP1130 o n a ve rtic a l o r ho rizo nta l p o le . The p o le c a n b e fro m
1.0 - 2.75 inc he s (25 to 70 mm) d ia me te r. Yo u c a n a lso o rd e r a ho se stra p tha t will fit p o le s with a 3" to 15" (76
to 381 mm) d ia me te r (AH-AC C -1130-STRP-3-15).
1.
Atta c h the b ra c ke t to the b a c k o f the unit fo r e ithe r a ve rtic a l o r ho rizo nta l mo unt using the fo ur
mo unting b o lts with a tta c he d wa she rs. Tig hte n the b o lts with a c ro sshe a d sc re wd rive r. Be sure to use the
b o lts with wa she rs fro m the p la stic b a g la b e le d “ Po le Mo unt a nd G ro und ing ” a s the y se c ure the b ra c ke t
tig htly to the b a c k o f the d e vic e fo r p o le mo unts.
The e mb o sse d a rro ws o n the b ra c ke t sho uld b e p o inting up fo r b o th a ve rtic a l p o le mo unt, a nd a
ve rtic a l surfa c e (wa ll) mo unt.
Bracket installed for a vertical pole mount
Slip large ends of
bracket keyholes over
mounting screws.
Bracket installed for a horizontal pole mount
Slide bracket up until
screws are in the narrow
portion of the keyhole.
Tighten the locking screws to
secure the bracket.
Locking
screw
2.
Thre a d the o p e n e nd o f the ho se stra p thro ug h the two ta b s o n the mo unting b ra c ke t.
Ae ro hive Ne two rks
3.
Fit the ho se stra p a ro und the p o le a nd tig hte n the c la mp with a 1/ 4” (2 c m) slo tte d sc re wd rive r o r a
5/ 16” (8 mm) d rive so c ke t (o r nut) d rive r.
Thread the strap
through the slots in
the mounting bracket
(a vertical pole
mount is shown).
Tighten the
clamp around
the pole.
Pole
4.
Inse rt the fifth b o lt with wa she r thro ug h the te rmina l o n o ne e nd o f the g ro und c a b le . Thre a d the b o lt
into the g ro und ho le o n the b a c k o f the unit a nd tig hte n it until the g ro und te rmina l is se c ure .
5.
C o nne c t the o the r e nd o f the c a b le to a n a p p ro p ria te g ro und .
Cable terminal
Pole
Grounding nut
Grounding lug
C o rre c t Alig nme nt o f De vic e to Ea rth
Fo r b o th ve rtic a l a nd ho rizo nta l insta lla tio ns (suc h a s the a rm o f a stre e t lig ht), ma ke sure tha t the fa c e o f the
d e vic e is p e rp e nd ic ula r to Ea rth fo r o p tima l RF c o ve ra g e a nd to c o mp ly with FC C re g ula tio ns.
Vertical mount
Earth
Horizontal mount
Ae ro hive Ne two rks
Fla t Surfa c e Insta lla tio n
The fo llo wing ste p s e xp la in ho w to mo unt the AP1130 o n a fla t surfa c e o r wa ll. Yo u will ne e d the mo unting
b ra c ke t a nd the fo ur b o lts witho ut wa she rs in the p la stic b a g la b e le d “ Wa ll Mo unt” . Yo u will a lso ne e d fo ur
mo unting sc re ws a nd wa ll mo unt a nc ho rs (no t inc lud e d ) tha t a re a p p ro p ria te fo r the wa ll typ e whe re yo u
a re insta lling the unit.
1.
Use the b ra c ke t a s a te mp la te to ma rk the lo c a tio n o f the mo unting ho le s o n the wa ll.
Use the bracket as
a template to
mark where to
drill the holes in
the wall.
Wall
2.
Drill a ho le into the wa ll a t e a c h ma rk. Atta c h the b ra c ke t to the wa ll using the a p p ro p ria te mo unting
sc re ws a nd a nc ho rs fo r the wa ll typ e .
If yo u a re no t insta lling the de vic e o n a c o nc re te wa ll, yo u c a n use thre a de d sc re ws a nd p la stic wa ll
a nc ho rs (no t sup p lie d) to mo unt the de vic e .
3.
Inse rt the b o lts witho ut wa she rs fro m the p la stic b a g la b e le d “ Wa ll Mo unt” into the fo ur mo unting ho le s
o n the b a c k o f the d e vic e .
4.
Inse rt the he a d s o f the b o lts o n the d e vic e into the la rg e e nd o f the b ra c ke t ke yho le s a nd slid e the
d e vic e d o wn until the b o lts re st in the na rro w e nd o f the ke yho le s.
5.
Tig hte n the lo c king sc re ws to se c ure the d e vic e to the wa ll mo unt b ra c ke t.
6.
C o nne c t the te rmina l o n o ne e nd o f the g ro und ing c a b le to the g ro und ing lug o n the d e vic e a nd
c o nne c t the o the r e nd o f the c a b le to a n a p p ro p ria te g ro und , a s sho wn in Ste p 5 o n p a g e 6.
Atta c hing Exte rna l Ante nna s
O nc e yo u ha ve g ro und e d yo ur AP1130, yo u a re re a d y to c o nne c t the a nte nna s.
It is e xtre me ly imp o rta nt to p ro p e rly g ro und yo ur d e vic e to c o mp le te yo ur insta lla tio n.
Use a nte nna s tha t fit the N-typ e a nte nna c o nne c to rs o n the to p a nd b o tto m o f the AP1130. The two
c o nne c to rs o n the b o tto m o f the unit a re fo r 2.4 G Hz a nte nna s, a nd the two o n the to p o f the unit a re fo r 5
G Hz a nte nna s (d e vic e a nd a nte nna s a re la b e le d ).
Sc re w the a nte nna s o nto the a nte nna c o nne c to rs, turning the m c lo c kwise a nd tig hte ning with yo ur fing e rs
until the y a re se c ure .
Fing e r-tig hte n the a nte nna s to the c o nne c to rs o nly, d o no t use to o ls o r yo ur wrist. If yo u o ve r-tig hte n the
a nte nna s o n the c o nne c to rs, yo u c a n c o mp ro mise the wa te rp ro o f se a l.
Whe n yo u a re no t using the a nte nna s, a lwa ys c o ve r the a nte nna c o nne c to rs with a nte nna c o nne c to r c a p s
to p ro te c t the c o nne c to rs a nd me e t IP67 c o mp lia nc e re q uire me nts.
In the Unite d Sta te s o f Ame ric a , wire le ss d e vic e s with N-typ e c o nne c to rs must b e insta lle d b y a
p ro fe ssio na l insta lle r to sa tisfy FC C a nte nna re q uire me nts fo r a uniq ue c o nne c tio n me tho d.
Ae ro hive Ne two rks
Se tting the Ante nna Typ e
If yo u a re re -insta lling o mni-d ire c tio na l a nte nna s o n yo ur d e vic e a fte r using d ire c tio na l o r se c to r a nte nna s,
yo u must a lso c ha ng e the a nte nna typ e b a c k to the d e fa ult (o mni). This c a n b e d o ne in Hive Ma na g e r >
Mo nito r > Ac c e ss Po ints > de vic e nam e > Mo dify .
In the Mo d ify d ia lo g b o x, in the se c tio n und e r De vic e C la ssific a tio n whe re yo u a ssig n ra d io p ro file s, fo r a n
AP1130 yo u will se e a fie ld a t the fa r rig ht whe re yo u c a n se le c t the a nte nna typ e . Ma ke sure tha t o mni is
se le c te d fo r b o th b a nd s. Whe n yo u a re finishe d , re me mb e r to c lic k Sa ve .
Yo u c a n a lso ma ke this c ha ng e thro ug h a n SSH se ssio n using the fo llo wing C LI c o mma nd :
#int wifi1 radio antenna type omni
Atta c hing the Ethe rne t C a b le Wa te rp ro o f Ho using
The fo llo wing ste p s e xp la in ho w to e nsure a we a the rp ro o f se a l fo r the Ethe rne t c a b le using the wa te rp ro o f
ho using a sse mb ly sho wn in the illustra tio n.
1.
Disa sse mb le the wa te rp ro o f ho using . The re a re fo ur p ie c e s: a thre a d e d nut, a slo tte d c a b le g rip , a
wa te rp ro o f p lug , a nd a thre a d e d ho using .
2.
Slid e the thre a d e d nut o ve r the Ethe rne t c a b le . Use Ethe rne t c a b le tha t is ra te d fo r o utd o o r use .
3.
Slip the wa te rp ro o f p lug o ve r the c a b le in fro nt o f the thre a d e d nut.
4.
Slip the slo tte d c a b le g rip o nto the Ethe rne t c a b le in fro nt o f the p lug . Ma ke sure the rid g e o n the c a b le
g rip is fa c ing the RJ45 c o nne c to r o n the c a b le . C o rre c t a nd inc o rre c t p o sitio ning a re sho wn b e lo w.
Use o nly sta nda rd (no n-b o o te d) Ethe rne t c a b le s ra te d fo r o utdo o r use . The rub b e r c o nne c to r c o ve rs
(b o o ts) o n b o o te d c a b le s c a n inte rfe re with the c o nne c tio n a nd c o mp ro mise the wa te rp ro o f se a l.
Incorrect
Correct
Slot
Slot
5.
Slid e the thre a d e d ho using o nto the c a b le a nd o ve r the c a b le g rip (the g rip fits insid e the ho using ).
6.
Push the c a b le c o nne c to r into the thre a d e d ho using until yo u c a nno t p ush it a ny fa rthe r a nd it is firmly
se a te d in the ho using .
7.
Push the wa te rp ro o f p lug into the thre a d e d ho using until it fits snug ly b e hind the c a b le g rip .
8.
Sc re w the thre a d e d nut o nto the thre a d e d ho using until it is tig ht.
9.
Inse rt the Ethe rne t c a b le into the fe ma le c o nne c to r o n the c ha ssis. Ro ta te the he a d o f the thre a d e d
ho using c lo c kwise until it lo c ks into p la c e .
10. C o nne c t the o the r e nd o f the Ethe rne t c a b le to a Po E-e na b le d switc h, o r Po E inje c to r.
Ae ro hive Ne two rks
Step 4. slotted cable grip
Step 2. Threaded nut
Step 5. Threaded housing
Step 3.
Waterproof plug
Connector
The slot must be at the
connector end of the grip.
Ac c e ssing the Re se t Butto n
The Re se t b utto n is lo c a te d o n the rig ht sid e p a ne l. To a c c e ss it, re mo ve the sc re w tha t c o ve rs the b utto n.
Use a p a p e r c lip o r simila r to o l to p ush the b utto n in b e twe e n 1 a nd 5 se c o nd s to re b o o t the d e vic e , o r fo r 5
se c o nd s o r mo re to re turn the d e vic e to the fa c to ry d e fa ult se tting s. Whe n yo u a re d o ne , re p la c e the c o ve r
sc re w firmly to c o ve r the a c c e ss p o int a nd re sto re the d e vic e to its we a the rp ro o f sta te .
Reset button
Using the Ante nna Alig nme nt Buzze r
The AP1130 ha s a n a ud ib le b uzze r sig na l to he lp yo u a lig n a nte nna s fo r the b e st c o ve ra g e . By d e fa ult, the
b uzze r is e na b le d a nd will b e e p with c ha ng ing fre q ue nc y b a se d o n the sig na l stre ng ths tha t a re d e te rmine d
d uring the a lig nme nt p ro c e ss. The b e tte r the sig na l stre ng th, the mo re fre q ue nt the b e e p s.
Yo u c a n e na b le , c o nfig ure , a nd d isa b le the b uzze r using the fo llo wing C LI c o mma nd thro ug h a C o nso le
c o nne c tio n to the d e vic e .
C LI Synta x: exec antenna-alignment interface  peer  [count [numbers]]
[interval [numbers]] [text-size [numbers]] [beep [static]|[adaptive]|[disable]]
•
b e e p : Se t the a nte nna b uzze r mo d e , whic h the d e vic e use s to ind ic a te the q ua lity o f a nte nna a lig nme nt
b y inc re a sing the fre q ue nc y o f a ud ib le b e e p s a s the sig na l stre ng th imp ro ve s. The d e fa ult is a d a p tive .
•
sta tic : Se t the a nte nna b uzze r to b e e p whe n the sig na l stre ng th fa lls b e twe e n 0 a nd 80 d B.
•
a da ptive : Se t the a nte nna b uzze r to b e e p b a se d o n the sig na l stre ng ths tha t a re d e te rmine d d uring the
a lig nme nt p ro c e ss.
•
disa b le : Disa b le the a nte nna b uzze r.
AP1130 LEDs
The AP1130 ha s a Sta tus LED o n the b o tto m o f the unit, a nd a Sig na l Stre ng th LED a nd thre e c o nne c tivity LEDs
o n the rig ht p a ne l. The LED c o lo rs a nd wha t the y ind ic a te a re d e sc rib e d b e lo w.
Sta tus LED
•
Da rk: no p o we r to the d e vic e .
•
Am b e r (ste a d y): the d e vic e ha s no t ma d e a C APWAP c o nne c tio n.
•
Am b e r (fla shing ): the d e vic e is und e rg o ing a firmwa re up g ra d e .
•
White : the d e vic e is o p e ra ting p ro p e rly.
Sig na l Stre ng th LED:
•
Da rk: no sig na l o r no t in use .
•
Am b e r: the sig na l is we a k (no ne ig hb o r ha s b e e n fo und with a sig na l stre ng th g re a te r tha n -60 d Bm).
Ae ro hive Ne two rks
•
White : the sig na l is stro ng (ne ig hb o r o r ne ig hb o rs fo und with sig na l stre ng ths g re a te r tha n -60 d Bm).
5G Hz LED:
•
G re e n (ste a d y): The c o nne c tio n is func tio ning a s b a c kha ul with a ne ig hb o r.
•
G re e n (fla shing ): The c o nne c tio n is func tio ning a s b a c kha ul with no ne ig hb o r.
•
Da rk: the re is no c o nne c tio n.
2.4 G Hz LED:
•
G re e n (ste a d y): The c o nne c tio n is func tio ning a s b a c kha ul with a ne ig hb o r.
•
G re e n (fla shing ): The c o nne c tio n is func tio ning a s b a c kha ul with no ne ig hb o r.
•
Da rk: the re is no c o nne c tio n.
Eth LED:
•
G re e n (ste a d y): The c o nne c tio n is func tio ning a s b a c kha ul with a ne ig hb o r.
•
G re e n (fla shing ): The c o nne c tio n is func tio ning a s b a c kha ul with no ne ig hb o r.
•
Da rk: the re is no c o nne c tio n.
Po E a nd Ethe rne t Pro te c tio n
In mo st c a se s, yo u c a n c o nne c t a n Ethe rne t c a b le d ire c tly fro m the AP1130 to a Po E-e na b le d switc h o r to a
Po E inje c to r insid e the b uild ing . In so me c a se s, yo u mig ht ne e d to insta ll a n o utd o o r, wa te rp ro o f Po E inje c to r.
The AP1130 a nd o utd o o r Po E inje c to rs ha ve b uilt-in surg e p ro te c tio n to g ua rd a g a inst lig htning strike s.
Ho we ve r, the ne two rk whe re the Ethe rne t c a b le e nte rs the b uild ing re q uire s p ro te c tio n a s we ll. To p re ve nt
the ind o o r ne two rk fro m p o we r surg e s c a use d b y lig htning , p la c e a n Ethe rne t p ro te c to r inline b e twe e n the
AP a nd the re st o f the ne two rk. Use the fo llo wing ste p s:
1.
Atta c h the Ethe rne t p ro te c tio n d e vic e to the b uild ing a t the e ntry p o int o f the shie ld e d Ethe rne t c a b le
fro m the AP1130.
2.
Ma ke the fo llo wing c o nne c tio ns, a s sho wn in the illustra tio n:
•
G ro und the d e vic e b y running a wire fro m the g ro und ing stud to a g ro und e d o b je c t, suc h a s a wa te r
p ip e , g a s p ip e , o r g ro und ing ro d .
•
C o nne c t the shie ld e d Ethe rne t c a b le fro m the p o rt la b e le d “ Eq uip me nt Sid e ” to the ne two rk.
To a grounded object
Grounding wire
Ethernet Protector
Shielded Ethernet cable
Ethernet cable
To a switch, PoE switch, or
indoor PoE injector inline
to the network.
To the AP1130 or to an outdoor
PoE injector inline to the AP1130
C o nne c ting to the Ne two rk
The fina l ste p to the insta lla tio n is to c o nne c t the AP to the ne two rk so tha t it c a n fo rm a C APWAP (C o ntro l
a nd Pro visio ning o f Wire le ss Ac c e ss Po ints) c o nne c tio n to Hive Ma na g e r. C APWAP is a p ro to c o l tha t a c c e ss
p o ints use to c o nta c t a nd c o mmunic a te with a ma na g e me nt d e vic e .
Afte r yo u c o nne c t the AP to a n Ethe rne t ne two rk a nd p o we r it o n, it a uto ma tic a lly a tte mp ts to g e t ne two rk
se tting s thro ug h DHC P a nd c o nta c t Hive Ma na g e r. The p ro c e ss typ ic a lly ta ke s a b o ut five minute s to
c o mp le te . Whe n yo u se e the AP liste d in the Hive Ma na g e r G UI, the initia l se tup is c o mp le te a nd yo u c a n
b e g in ma na g ing the AP with Hive Ma na g e r.
If the AP d o e s no t a p p e a r in Hive Ma na g e r a fte r a b o ut te n minute s, re a d the fo llo wing se c tio ns to
und e rsta nd ho w the AP trie s to c o nta c t Hive Ma na g e r a nd ho w yo u c a n he lp e sta b lish the c o nne c tio n.
10
Ae ro hive Ne two rks
C o nne c ting to Hive Ma na g e r
By d e fa ult, a n AP a c ts a s a DHC P c lie nt, a nd g e ts ne two rk se tting s a uto ma tic a lly fro m a DHC P se rve r.
The AP the n a c ts a s a C APWAP c lie nt a nd se nd s C APWAP Disc o ve ry me ssa g e s until Hive Ma na g e r, a c ting a s
the C APWAP se rve r, re sp o nd s.
Whe n a n AP g o e s o n line fo r the first time , a nd the re is no C APWAP se rve r c o nfig ura tio n e nte re d ma nua lly o r
re c e ive d a s a DHC P o p tio n, it p ro g re sse s thro ug h the fo llo wing c yc le o f C APWAP c o nne c tio n a tte mp ts.
1.
The AP trie s to c o nne c t to Hive Ma na g e r using the d e fa ult na me hive ma na g e r.:12222,
whe re  is the d o ma in na me sup p lie d b y a DHC P se rve r, a nd 12222 is the UDP p o rt
numb e r. If the re is a DNS se rve r to re so lve the d o ma in na me to a n IP a d d re ss, the AP a nd Hive Ma na g e r
c a n fo rm a se c ure C APWAP c o nne c tio n o n p o rt 12222. If the AP c a nno t c o nne c t o n p o rt 12222, it trie s to
re a c h Hive Ma na g e r using TC P p o rt 80: hive ma na g e r. :80.
2.
If the DNS se rve r c a nno t re so lve the d o ma in na me to a n IP a d d re ss, the AP b ro a d c a sts C APWAP
Disc o ve ry Re q ue st me ssa g e s o n its lo c a l sub ne t. If Hive Ma na g e r is o n the lo c a l ne two rk a nd re sp o nd s with
a Disc o ve ry Re sp o nse me ssa g e , the y p e rfo rm a DTLS (Da ta g ra m Tra nsp o rt La ye r Se c urity) ha nd sha ke to
e sta b lish a se c ure C APWAP c o nne c tio n.
3.
If the first two se a rc he s a re no t suc c e ssful, the AP trie s to c o nta c t Hive Ma na g e r O nline a t
re d ire c to r.a e ro hive .c o m:12222. If the re d ire c tio n se rve r ha s a se ria l numb e r fo r the AP in its AC L (a c c e ss
c o ntro l list), it re sp o nd s a nd the y fo rm a se c ure C APWAP c o nne c tio n. If the AP c a nno t ma ke a C APWAP
c o nne c tio n to Hive Ma na g e r O nline o n UDP p o rt 12222, it trie s to re a c h it o n TC P p o rt 80. If tha t is no t
suc c e ssful, the AP re turns to the o rig ina l se a rc h thro ug h a DNS lo o kup a nd re p e a ts the c yc le .
If a n AP fo rms a C APWAP c o nne c tio n with the re d ire c tio n se rve r a nd its se ria l numb e r o r MAC a d d re ss ha s
b e e n a ssig ne d to a p re vio usly c re a te d VHM, a p hysic a l Hive Ma na g e r a p p lia nc e , o r a Hive Ma na g e r Virtua l
Ap p lia nc e , the re d ire c tio n se rve r a uto ma tic a lly re d ire c ts the C APWAP c o nne c tio n to tha t Hive Ma na g e r
insta nc e b y se nd ing the AP1130 the Hive Ma na g e r d o ma in na me o r IP a d d re ss a s its ne w C APWAP se rve r. If
the AP is c urre ntly using HTTP a nd it will b e re d ire c te d to a Hive Ma na g e r O nline VHM, the re d ire c tio n se rve r
a lso se nd s it the c o nfig ura tio n it ne e d s to c o ntinue using HTTP. Simila rly, if the AP is a c c e ssing the ne two rk
thro ug h a n HTTP p ro xy se rve r, the re d ire c tio n se rve r a lso sa ve s tho se se tting s o n the AP so it c a n re a c h the
Hive Ma na g e r O nline VHM using HTTP thro ug h the HTTP p ro xy se rve r.
The AP tries to connect to
HiveManager using
hivemanager.:12222
If there is a DNS server to resolve
the domain name to an IP address,
the AP and HiveManager form a
secure CAPWAP connection on port
12222. If they cannot connect on
port 12222, the AP tries TCP port 80:
hivemanager.:80
HiveManager or
HiveManager Virtual
Appliance
If the DNS server cannot
resolve the domain name to
an IP address, the AP
broadcasts CAPWAP
Discovery messages on its
local subnet. If
HiveManager is on the
local network and
responds, a secure CAPWAP
connection is made.
HiveManager Online
If step 2 does not work, the AP tries
to contact HiveManager Online at
redirector.aerohive.com:12222. If the
redirection server has the serial number
for the AP it responds and a CAPWAP
connection is made. If the AP cannot connect
on UDP port 12222, it tries TCP port 80. If this
is unsuccessful, the AP returns to step 1.
11
Ae ro hive Ne two rks
If the re d ire c tio n se rve r must re d ire c t the AP to a sta nd a lo ne Hive Ma na g e r a p p lia nc e o r Hive Ma na g e r
Virtua l Ap p lia nc e , the n yo u must c o nfig ure the c o nne c tio n se tting s o n the re d ire c tio n se rve r tha t yo u wa nt it
to p ush to the AP to ma ke tha t c o nne c tio n. The AP first use s wha te ve r se tting s a re c o nfig ure d o n it to re a c h
the re d ire c tio n se rve r, whic h c o uld b e o n the o the r sid e o f a n HTTP p ro xy se rve r o r fire wa ll tha t o nly p e rmits
o utb o und HTTP tra ffic . The n the re d ire c tio n se rve r mig ht se nd the AP d iffe re nt se tting s so the it c a n re a c h a
sta nd a lo ne Hive Ma na g e r insta nc e , whic h c o uld b e o n the sa me sid e o f the HTTP p ro xy se rve r o r fire wa ll a s
the AP a nd the re fo re re q uire s d iffe re nt c o nne c tio n p a ra me te rs.
If the AP se ria l numb e r o r MAC a d d re ss is in the re d ire c tio n se rve r b ut the VHM ha s no t ye t b e e n c re a te d , o r
the c o nne c tio n se tting s o f the sta nd a lo ne Hive Ma na g e r ha ve no t ye t b e e n c o nfig ure d o n the re d ire c tio n
se rve r, the n the AP re ma ins in the re d ire c tio n se rve r. The Hive Ma na g e r a d min must ma nua lly re a ssig n it la te r
to the a p p ro p ria te Hive Ma na g e r insta nc e .
Whe re to Find Mo re Info rma tio n
Te c hnic a l Do c um e nta tio n: Ae ro hive p ro vid e s va rio us te c hnic a l d o c ume nts fo r its p ro d uc ts. Fo r info rma tio n
a b o ut C LI c o mma nd s, se e the C LI re fe re nc e g uid e s a va ila b le in HTML fo rma t. Fo r info rma tio n a b o ut
Hive Ma na g e r a nd AP ha rd wa re a nd so ftwa re to p ic s, se e the Hive Ma na g e r He lp syste m, o r visit
www.a e ro hive .c o m/ q uic k. To a c c e ss p ro d uc t d o c ume nta tio n, visit www.a e ro hive .c o m/ te c hd o c s.
Hive Ma na g e r He lp Syste m : The Hive Ma na g e r He lp syste m c o nta ins a we a lth o f info rma tio n a b o ut a ll the
fe a ture s yo u c a n c o nfig ure thro ug h Hive Ma na g e r. To a c c e ss it, c lic k the He lp ic o n in the up p e r rig ht c o rne r
o f the G UI. A He lp to p ic tha t p e rta ins to the c urre ntly a c tive G UI p a g e a p p e a rs. Use the ta b le o f c o nte nts to
b ro wse the He lp syste m o r the se a rc h to o l to find info rma tio n a b o ut a sp e c ific sub je c t.
Suppo rt Site : Ac c e ss te c hnic a l sup p o rt se rvic e s, d o c ume nta tio n, a nd so ftwa re a t
www.a e ro hive .c o m/ sup p o rt/ lo g in.html. Afte r re g iste ring fo r a n a c c o unt, yo u will re c e ive a use r na me a nd
p a sswo rd to e nte r whe n lo g g ing in. Yo u c a n c o nta c t Sup p o rt fo r a ssista nc e thro ug h the we b site o r b y
p ho ne (+1 408.510.6100 o r 866.365.9918).
Tra ining : Ae ro hive o ffe rs c o urse s c o ve ring the Ae ro hive c o o p e ra tive c o ntro l c o nc e p ts, the insta lla tio n a nd
c o nfig ura tio n o f Ae ro hive p ro d uc ts, a nd ho w to tro ub le sho o t issue s a nd o p timize p e rfo rma nc e . Fo r mo re
info rma tio n, visit www.a e ro hive .c o m/ sup p o rt/ tra ining .html.
Ae ro hive a lso o ffe rs C BT (c o mp ute r-b a se d tra ining ) mo d ule s. C BTs a re o nline Fla sh tuto ria ls tha t e xp la in
Ae ro hive c o nc e p ts a nd wa lk yo u thro ug h c o nfig ura tio n p ro c e d ure s ste p b y ste p . Yo u c a n use C BTs to
fa milia rize yo urse lf with the Hive Ma na g e r G UI a nd le a rn ho w to c o nfig ure Hive APs. Ae ro hive C BTs a re
a va ila b le fo r fre e o nline a t www.a e ro hive .c o m/ te c hd o c s.
Fe de ra l C o m m unic a tio n C o m m issio n Inte rfe re nc e Sta te m e nt
This e q uip me nt ha s b e e n te ste d a nd fo und to c o mp ly with the limits fo r a C la ss B d ig ita l d e vic e , p ursua nt to Pa rt 15 o f the FC C Rule s. The se limits a re
d e sig ne d to p ro vid e re a so na b le p ro te c tio n a g a inst ha rmful inte rfe re nc e in a re sid e ntia l insta lla tio n. This e q uip me nt g e ne ra te s, use s a nd c a n ra d ia te
ra d io fre q ue nc y e ne rg y a nd , if no t insta lle d a nd use d in a c c o rd a nc e with the instruc tio ns, ma y c a use ha rmful inte rfe re nc e to ra d io c o mmunic a tio ns.
Ho we ve r, the re is no g ua ra nte e tha t inte rfe re nc e will no t o c c ur in a p a rtic ula r insta lla tio n. If this e q uip me nt d o e s c a use ha rmful inte rfe re nc e to ra d io o r
te le visio n re c e p tio n, whic h c a n b e d e te rmine d b y turning the e q uip me nt o ff a nd o n, the use r is e nc o ura g e d to try to c o rre c t the inte rfe re nc e b y o ne o f
the fo llo wing me a sure s:
•
Re o rie nt o r re lo c a te the re c e iving a nte nna .
•
Inc re a se the se p a ra tio n b e twe e n the e q uip m e nt a nd re c e ive r.
•
C o nne c t the e q uip me nt into a n o utle t o n a c irc uit d iffe re nt fro m tha t to whic h the re c e ive r is c o nne c te d .
•
Consult the dealer or an experienced radio/TV technician for help.
FC C C autio n: Any c ha ng e s o r mo d ific a tio ns no t e xp re ssly a p p ro ve d b y the p a rty re sp o nsib le fo r c o mp lia nc e c o uld vo id the use r’ s a utho rity to o p e ra te
this e q uip me nt.
This d e vic e c o mp lie s with Pa rt 15 o f the FC C Rule s. O p e ra tio n is sub je c t to the fo llo wing two c o nd itio ns: (1) This d e vic e ma y no t c a use ha rmful
inte rfe re nc e , a nd (2) this d e vic e must a c c e p t a ny inte rfe re nc e re c e ive d , inc lud ing inte rfe re nc e tha t ma y c a use und e sire d o p e ra tio n.
Fo r p ro d uc ts a va ila b le in the USA a nd C a na d a , o nly c ha nne ls 1~11 c a n b e o p e ra te d . Se le c tio n o f o the r c ha nne ls is no t p o ssib le .
This d e vic e a nd its a nte nna s must no t b e c o -lo c a te d o r o p e ra ting in c o njunc tio n with a ny o the r a nte nna o r tra nsmitte r e xc e p t in a c c o rd a nc e with FC C
multi-tra nsmitte r p ro d uc t p ro c e d ure s.
IMPO RTANT NO TE: FC C Ra dia tio n Expo sure Sta te m e nt:
This e q uip me nt c o mp lie s with FC C ra d ia tio n e xp o sure limits se t fo rth fo r a n unc o ntro lle d e nviro nme nt. This e q uip me nt sho uld b e insta lle d a nd o p e ra te d
with a minimum d ista nc e 15.75" (40 c m) b e twe e n the ra d ia to r a nd yo ur b o d y.
FC C NO TIC E: To c o mp ly with FC C p a rt 15 rule s in the Unite d Sta te s, the syste m must b e p ro fe ssio na lly insta lle d to e nsure c o mp lia nc e with the Pa rt 15
c e rtific a tio n. It is the re sp o nsib ility o f the o p e ra to r a nd p ro fe ssio na l insta lle r to e nsure tha t o nly c e rtifie d syste ms a re d e p lo ye d in the Unite d Sta te s. The
use o f the syste m in a ny o the r c o mb ina tio n (suc h a s c o -lo c a te d a nte nna s tra nsmitting the sa me info rma tio n) is e xp re ssly fo rb id de n.
12
Ae ro hive Ne two rks
Industry C a na da (IC ) Sta te m e nt
This d e vic e c o mp lie s with Ind ustry C a na d a lic e nse -e xe mp t RSS sta nd a rd (s). O p e ra tio n is sub je c t to the fo llo wing two c o nd itio ns: (1) this d e vic e ma y no t
c a use inte rfe re nc e , a nd (2) this d e vic e must a c c e p t a ny inte rfe re nc e , inc lud ing inte rfe re nc e tha t ma y c a use und e sire d o p e ra tio n o f the d e vic e .
Le p ré se nt a p p a re il e st c o nfo rme a ux C NR d 'Ind ustrie C a na d a a p p lic a b le s a ux a p p a re ils ra d io e xe mp ts d e lic e nc e . L'e xp lo ita tio n e st a uto risé e a ux
d e ux c o nd itio ns suiva nte s: (1) l'a p p a re il ne d o it p a s p ro d uire d e b ro uilla g e , e t (2) l'utilisa te ur d e l'a p p a re il d o it a c c e p te r to ut b ro uilla g e ra d io é le c triq ue
sub i, mê me si le b ro uilla g e e st susc e p tib le d 'e n c o mp ro me ttre le fo nc tio nne me nt.
Fo r p ro d uc ts a va ila b le in the USA a nd C a na d a , o nly c ha nne l 1~11 c a n b e o p e ra te d . Se le c tio n o f o the r c ha nne ls is no t p o ssib le .
Po ur le s p ro d uits d isp o nib le s a ux Éta ts-Unis / C a na d a d u ma rc hé , se ul le c a na l 1 à 11 p e uve nt ê tre e xp lo ité s. Sé le c tio n d 'a utre s c a na ux n'e st p a s
p o ssib le .
This d e vic e a nd its a nte nna s must no t b e c o -lo c a te d o r o p e ra ting in c o njunc tio n with a ny o the r a nte nna o r tra nsmitte r e xc e p t in a c c o rd a nc e with IC
multi-tra nsmitte r p ro d uc t p ro c e d ure s.
C e t a p p a re il e t so n a nte nne (s) ne d o it p a s ê tre c o -lo c a lisé s o u fo nc tio nne me nt e n a sso c ia tio n a ve c une a utre a nte nne o u tra nsme tte ur.
Dyna mic Fre q ue nc y Se le c tio n (DFS) fo r d e vic e s o p e ra ting in the b a nd s 5250- 5350 MHz,5470-5600 MHz a nd 5650-5725 MHz
Sé le c tio n d yna miq ue d e fré q ue nc e s (DFS) p o ur le s d isp o sitifs fo nc tio nna nt d a ns le s b a nd e s 5250-5350 MHz, 5470-5600 MHz e t 5650-5725 MHz.
The ma ximum a nte nna g a in p e rmitte d (fo r d e vic e s in the b a nd s 5250-5350 MHz a nd 5470-5725 MHz) to c o mp ly with the e .i.r.p . limit.
le g a in ma xima l d ’ a nte nne p e rmis p o ur le s d isp o sitifs utilisa nt le s b a nd e s 5250-5350 MHz e t 5470-5725 MHz d o it se c o nfo rme r à la limite d e p .i.r.e .
Use rs sho uld a lso b e a d vise d tha t hig h-p o we r ra d a rs a re a llo c a te d a s p rima ry use rs (i.e . p rio rity use rs) o f the b a nd s 5250-5350 MHz a nd 5650-5850 MHz
a nd tha t the se ra d a rs c o uld c a use inte rfe re nc e a nd /o r d a ma g e to LE-LAN d e vic e s.
De p lus, le s utilisa te urs d e vra ie nt a ussi ê tre a visé s q ue le s utilisa te urs d e ra d a rs d e ha ute p uissa nc e so nt d é sig né s utilisa te urs p rinc ip a ux (c .-à -d ., q u’ ils
o nt la p rio rité ) p o ur le s b a nd e s 5250-5350 MHz e t 5650-5850 MHz e t q ue c e s ra d a rs p o urra ie nt c a use r d u b ro uilla g e e t/o u d e s d o mma g e s a ux d isp o sitifs
LAN-EL.
IMPO RTANT NO TE: IC Ra dia tio n Expo sure Sta te m e nt:
This e q uip me nt c o mp lie s with IC RSS-102 ra d ia tio n e xp o sure limits se t fo rth fo r a n unc o ntro lle d e nviro nme nt. This e q uip me nt sho uld b e insta lle d a nd
o p e ra te d with minimum d ista nc e 67 c m (27.5") b e twe e n the ra d ia to r a nd yo ur b o d y.
C e t é q uip e me nt e st c o nfo rme a ux limite s d 'e xp o sitio n a ux ra yo nne me nts IC é ta b lie s p o ur un e nviro nne me nt no n c o ntrô lé . C e t é q uip e me nt d o it ê tre
insta llé e t utilisé a ve c un minimum d e 70 c m d e d ista nc e e ntre la so urc e d e ra yo nne me nt e t vo tre c o rp s.
This ra d io tra nsmitte r (AP1130) ha s b e e n a p p ro ve d b y Ind ustry C a na d a to o p e ra te with the a nte nna typ e s liste d b e lo w with the ma ximum p e rmissib le
g a in a nd re q uire d a nte nna imp e d a nc e fo r e a c h a nte nna typ e ind ic a te d . Ante nna typ e s no t inc lud e d in this list, ha ving a g a in g re a te r tha n the
ma ximum g a in ind ic a te d fo r tha t typ e , a re stric tly p ro hib ite d fo r use with this d e vic e .
Le p ré se nt é me tte ur ra d io (AP1130) a é té a p p ro uvé p a r Ind ustrie C a na d a p o ur fo nc tio nne r a ve c le s typ e s d 'a nte nne é numé ré s c i-d e sso us e t a ya nt un
g a in a d missib le ma xima l e t l'imp é d a nc e re q uise p o ur c ha q ue typ e d 'a nte nne . Le s typ e s d 'a nte nne no n inc lus d a ns c e tte liste , o u d o nt le g a in e st
sup é rie ur a u g a in ma xima l ind iq ué , so nt stric te me nt inte rd its p o ur l'e xp lo ita tio n d e l'é me tte ur.
Und e r Ind ustry C a na d a re g ula tio ns, this ra d io tra nsmitte r ma y o nly o p e ra te using a n a nte nna o f a typ e a nd ma ximum (o r le sse r) g a in a p p ro ve d fo r the
tra nsmitte r b y Ind ustry C a na d a . To re d uc e p o te ntia l ra d io inte rfe re nc e to o the r use rs, the a nte nna typ e a nd its g a in sho uld b e so c ho se n tha t the
e q uiva le nt iso tro p ic a lly ra d ia te d p o we r (e .i.r.p .) is no t mo re tha n tha t ne c e ssa ry fo r suc c e ssful c o mmunic a tio n.
C o nfo rmé me nt à la ré g le me nta tio n d ’ Ind ustrie C a na d a , le p ré se nt é me tte ur ra d io p e ut fo nc tio nne r a ve c une a nte nna d ’ un typ e e t d ’ un g a in
ma xima l (o u infé rie ur) a p p ro uvé p o ur l’ é me tte ur p a r Ind ustrie C a na d a . Da ns le b ut d e ré d uire le s risq ue s d e b ro uilla g e ra d io é le c triq ue à l’ inte ntio n d e s
a utre s utlisa te urs, il fa ut c ho isir le typ e d ’ a nte nne e t so n g a in d e so rte q ue la p uissa nc e iso tro p e ra yo né e é q uiva le nte (p .i.r.e ) ne d é p a sse p a s l’ inte nsité
ne c e ssa ire à l’ é sta b lisse me nt d ’ une c o mmunc a tio n sa tisfa isa nte .
Ant
Bra nd
Mo de l
Ante nna Type
C o nne c to r
Ante nna G a in
(dBi)
C a b le Lo ss
True G a in
(dBi)
(dBi)
2.4G Hz
5G Hz
2.4G Hz
5G Hz
2.4G Hz
5G Hz
WNC
Ve a b n01
Dip o le a nte nna
N Typ e
4.38
WNC
Ve a b n01
Dip o le a nte nna
N Typ e
5.5
ARE
ARE14220340
Dua l b a nd
se c to r a nte nna
N Typ e
5.0
6.0
C o nfo rmé me nt à la ré g le me nta tio n d 'Ind ustrie C a na d a , le p ré se nt é me tte ur ra d io p e ut fo nc tio nne r a ve c une a nte nne d 'un typ e
e t d 'un g a in ma xima l (o u infé rie ur) a p p ro uvé p o ur l'é me tte ur p a r Ind ustrie C a na d a . Da ns le b ut d e ré d uire le s risq ue s d e b ro uilla g e
ra d io é le c triq ue à l'inte ntio n d e s a utre s utilisa te urs, il fa ut c ho isir le typ e d 'a nte nne e t so n g a in d e so rte q ue la p uissa nc e iso tro p e
ra yo nné e é q uiva le nte (p .i.r.e .) ne d é p a sse p a s l'inte nsité né c e ssa ire à l'é ta b lisse me nt d 'une c o mmunic a tio n sa tisfa isa nte .
13
Ae ro hive Ne two rks
© 2015 Ae ro hive Ne two rks, Inc .
Ae ro hive is a U.S. re g iste re d tra d e ma rk o f Ae ro hive Ne tw o rks, Inc .
P/ N 330120-02 Re v. A
14

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Aerohive Technical Publications
Create Date                     : 2006:11:14 19:01:13Z
Modify Date                     : 2015:10:19 10:23:55+08:00
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Creator                         : Aerohive Technical Publications
Title                           : AP1130 Installation Guide
Creator Tool                    : FrameMaker 11.0
Metadata Date                   : 2015:10:19 10:23:55+08:00
Producer                        : Acrobat Distiller 15.0 (Windows)
Document ID                     : uuid:8e9360f3-7b12-4cd3-926e-0c7104ed3dc9
Instance ID                     : uuid:437d1102-4d4d-4cf7-b4a0-d490b0981924
Page Mode                       : UseOutlines
Page Count                      : 14
EXIF Metadata provided by EXIF.tools
FCC ID Filing: WBV-AP1130

Navigation menu