Agfa NV 5365 Drystar 5300/xxx tabletop printer User Manual 2923 B EN PnP Drystar 5300 A5
Agfa Gevaert N V Drystar 5300/xxx tabletop printer 2923 B EN PnP Drystar 5300 A5
Agfa NV >
Contents
- 1. User manual part 1
- 2. User manual part 2
- 3. User manual part 3
- 4. User manual part 4
User manual part 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 514501 |
| Application ID | eJlbRbkEEXiXs22yVIGtlA== |
| Document Description | User manual part 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 170.38kB (2129765 bits) |
| Date Submitted | 2005-02-11 00:00:00 |
| Date Available | 2005-02-11 00:00:00 |
| Creation Date | 2003-06-23 12:31:42 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2005-02-09 17:20:03 |
| Document Title | 2923 B EN PnP Drystar 5300-A5.fm |
| Document Creator | FrameMaker 6.0 |
Plug & Play Installation manual English edition AGFA Drystar 5300 POWER DECLARATION OF CONFORMITY Drystar 5300 XXXX XX XX XX XX XXXX XXXX XX XX XXXX XX XX XXXX XX XX XXXX XX XX XX XX XX XX XXXX XXXX XXXX XX XX XXXX XX XX XX XX XX XX XXXX XXXX XXXX XX XX XXXX XX XX XX XX XX XX XXXX XXXX XXXX XX XX XXXX XX XX XX XX XX XX XXXX XX XX XX XXXX XX XX XX XXXX XXXX XX XX XX XX XXXX 2923B EN 20031206 User manual Drystar 5300 Reference manual POWER POWER Health Care ❖ The device must only be operated according to its specifications and its intended use. Any operation not corresponding to the specifications or intended use may result in hazards, which in turn may lead to serious injuries or fatal accidents (for example electric shock). AGFA positively will not assume any liability in these cases. ❖ The device must only be installed and put into operation under the specified conditions. For more information about safety, security and use, refer to the Drystar 5300 Reference and User manual. For more information on Agfa products and Agfa HealthCare products, please visit www.agfa.com, your Point of Knowledge. © Agfa-Gevaert N.V. 2003. No parts of this document may be reproduced, copied, adapted or transmitted in any form or by any means without the written permission of Agfa-Gevaert N.V. Agfa-Gevaert N.V. makes no warranties or representation, expressed or implied, with respect to the accuracy, completeness or usefulness of the information contained in this document and specifically disclaims warranties of suitability for any particular purpose. Agfa-Gevaert N.V. shall under no circumstances be liable for any damage arising from the use or inability to use any information, apparatus, method or process disclosed in this document. Agfa-Gevaert N.V. reserves the right to make changes to this document without prior notice. Agfa-Gevaert N.V., Septestraat 27, B-2640 Mortsel, Belgium. Drystar 5300 is a trademark of Agfa-Gevaert N.V., Belgium. Agfa and the Agfa-Rhombus are trademarks of Agfa-Gevaert AG, Germany. 2/16 2923B EN 20031206 1 Contents of the packages Unpacking 1 Contents of the packages. Film pack Set of cables Drystar 5300 Set of tools DECLARATION OF CONFORMITY Drystar 5300 User manual Drystar 5300 Reference manual XXXX XX XX XX XX XXXX XXXX XX XX XXXX XX XX XXXX XX XX XXXX XX XX XX XX XX XX XXXX XXXX XXXX XX XX XXXX XX XX XX XX XX XXXX XXXX XXXX XXXX XX XX XX XX XX XX XX XX XX XXXX XXXX XXXX XXXX XX XX XX XXXX XX XX XXXX XXXX XX XX XXXX XX XX XXXX XXXX XX XX XX XX XX XXXX POWER POWER Health Care Set of documents Set of manuals 2 Required tools (included). Output tray adjustment tool Crosshead screwdriver 2923B EN 20031206 13 mm wrench Wire cutter (NOT included) 3/16 A 2 Remove the packing materials 2 Remove the cardboard box. 3 Remove the foam blocks. 4 Remove the plastic bag. Unpacking 1 Remove the wooden top plate. 4/16 2923B EN 20031206 3 Remove Drystar 5300 from pallet 2 Remove 2 screws. Unpacking 1 Take 13 mm wrench. MOBILE or SEISMIC INSTALLATION ONLY: reuse screws to fix printer at its location. 3 Shift printer to the right [1] and lift it 2923B EN 20031206 4 Put printer on a table. Align with the table edge. from pallet [2]. 5/16 A 4 Unpack the accessories Unpacking 1 Check all accessories. Drystar 5300 User manual Drystar 5300 Reference manu al POWER POWER Health Care DECLARATION OF CONFORMITY XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXXXX XXXX XXX XXX XXXX XXXX XXXXXX XXXXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXX XXXXXX XXXXXX XXX XXXX XXXXXX XXXXXX XXXXXX XXXX XXX XXX XXXX XXXXXX XXXX XXX XXXXXX XXX XXXX XXXXXX XXXXXX XXXX XXXXXX Refer to the Packing slip for a complete list of accessories. 2 Check all documents. DECLARATION OF CONFORMITY Drystar 5300 User manual Drystar 5300 Re ference manual POWER Refer to the Packing slip for a complete list of documents. POWER XXXX XX XX XX XX XXXX XXXX XX XX XXXX XX XX XXXX XX XX XXXX XX XX XX XX XX XX XXXX XXXX XXXX XX XX XXXX XX XX XX XX XX XXXX XXXX XXXX XXXX XX XX XX XX XX XX XX XX XX XXXX XXXX XXXX XX XX XXXX XX XX XX XX XX XX XXXX XX XX XX XXXX XX XX XX XXXX XXXX XX XX XX XX XXXX Health Care 3 Return the packing materials to a recycling service. Wood Paper Plastic Metals 6/16 2923B EN 20031206 1 Environment requirements. 2 Power requirements. ◆ Ventilated room, ◆ away from direct sunlight, ◆ away from sources of dust, humidity, heat and cold, room temperature between 10°C (50°F) and 30°C (86°F), ◆ ◆ Environment specifications The AC outlet must have either of following specifications: ◆ 100-120 V, 60 Hz, 16/15 A, Installation or ◆ 200-240 V, 50 Hz, 16/15 A. relative humidity between 10% and 80% non-condensing. m" 0 4 0 2 6 – 600 –24 mm 3 Space requirements. –0m 4 m Space required for servicing and installation 2923B EN 20031206 60 –2 mm 4" m" 0 2 0 3 8 – Space required for normal use 7/16 Installation B 6 8/16 Remove transport protections (1 of 2) 1 Open top cover. 2 Take wire cutter. 3 Cut 4 red straps. 4 Open hold-down bracket. 5 Remove foam sheet. 6 Close hold-down bracket. 2923B EN 20031206 Remove transport protections (2 of 2) 7 Close top cover. 8 Open input tray. XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXX XXXXXX XXXXXX 9 Remove foam block from input tray. 10 Close input tray. XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXX XXXXXX XXXXXX 11 Take crosshead screwdriver. 2923B EN 20031206 Installation XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXX XXXXXX XXXXXX 12 Remove drum screw. 9/16 Installation B 8 Adjust Input block module - 11x14” (1 of 2) 1 Take output tray adjustment tool. 2 Push tool down into output tray holes [1]. Push bracket until it clicks [2]. Click! 10/16 3 Take crosshead screwdriver. 4 Remove 3 screws. 5 Lower film positioner unit. 6 Loosen cable. 2923B EN 20031206 Adjust Input block module - 11x14” (2 of 2) 7 Push cable into printer housing. 8 Put and hold film positioner unit into place. Installation 9 Remount 3 screws. 2923B EN 20031206 11/16 Installation B 10 12/16 Connect the cables 1 Select the power cable. 2 Locate the mains connector. 3 Connect the power cable. 4 Locate the network connector and connect the network cable. 2923B EN 20031206 C Load film in the input tray (1 of 2) 1 Open input tray. Loading films 11 2 Open film box. XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXX XXXXXX XXXXXX 3 Take film pack and slide it into the input tray. XXXX XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXXXX XXXX 4 Remove sticker. XXXXXX XXXXXX XXXX XXXXXX XXXXXX 5 Slide film pack further inside. 6 Remove plastic film bag. XXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX 2923B EN 20031206 XXXXXX XXXXXX XXXX XXXX XXXXXX XXXXXX 13/16 Loading films C 12 Load film in the input tray (2 of 2) 7 Pull plastic tape from around films. XX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXXXX XXXXXX XXXX XXXX 8 Place film type sticker. XXXXX XXXXXX XX XXXX XXXX XX XX XXXX XXXX XXX X X X XXXXX XX XX XXX XXX XX XXXX XXXX XX XXXX XX XX XX XXXX XXXX XX XXXX XX XXXX XX XXXX XXXX XX XXXX XXXX XXXX XXX XXX XXX XX XX XXX XX XXXX XXXX XXXX XX XXXX 9 Close input tray. XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXX XXXXXX XXXXXX 10 Place film type sticker. XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXX XXXXXX XXXXXX XXXX XXXXXX XXXX XXXXXX XXXXXX XXXXXX XXXX XXXXXX XXXXXX 14/16 2923B EN 20031206 13 Startup Drystar 5300 Startup 1 Remove the display protection foil. The film delivered with the printer is intended for test purposes only. 2 Press the POWER button. 3 Wait until READY. Please WAIT Self test proceeding READY 62% 2923B EN 20031206 15/16 E 14 Configure network settings 1 Select and initiate the printer Network installation wizard. 1x Ask your network manager the following information: 8x 1x Printer IP address: 1. 2. 3. 4. 5. 6. Press the Key-operator key. Press the Down key eight times. Press the Confirm key. Press the Down key. Press the Confirm key. Follow the instructions (see Reference manual). Netmask: Router IP address: 1x Printer AE_Title: Service Host IP address: 2 Select and initiate film calibration. 1x 5x 1. 2. 3. 4. 1x 1 Installation from CF card 2 Printer installation IN 3 Your Drystar 5300 is ready for use! Press the Key-operator key. Press the Down key five times. Press the Confirm key twice. Follow the instructions (see Reference manual). 2x POWE SELECT CA CALIBRATION 1 Film calibration 2 Therm. Head clean. 16/16 2923B EN 20031206
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 16 Page Mode : UseOutlines XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:de4d0659-00bc-4f43-bfed-80e737bd4405 Producer : Acrobat Distiller 5.0 (Windows) Create Date : 2003:06:23 12:31:42Z Modify Date : 2005:02:09 17:20:03+01:00 Metadata Date : 2005:02:09 17:20:03+01:00 Creator Tool : FrameMaker 6.0 Document ID : uuid:28a03495-3587-4cb8-b960-1cda276dca77 Format : application/pdf Title : 2923 B EN PnP Drystar 5300-A5.fm Creator : FrameMaker 6.0EXIF Metadata provided by EXIF.tools