Airspan Networks 41AUETH LTE indoor CPE User Manual SLC 130S41G Sprint manual en v1 0
Airspan Networks Inc LTE indoor CPE SLC 130S41G Sprint manual en v1 0
UserManual.wiki
>
Airspan Networks
>
41AUETH User Manual
User Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![1(one) yearNameAddressTelephone numberE-mailPurchase dateQuality warranty periodSellerTelephone numberConsumerTrouble ShootingRefer to the following if you are having trouble connecting to the Internet :1. Check the LED status of Device.• Check if the POWER LED is illuminated.• Check if the LED of LTE is illuminated.• For LAN port, check if the lamp of the port connected to the PC is illuminated.2. Check the IP address of PC. • For Windows 7/8/10• Run [Command Prompt] and enter the [ipcong] command to check the [IP address].3. If IP Address is not normal – Set the IP Addressof the PC manually.• For Windows 7/8/10① Start > Control Panel > Network and Internet > Network Connections > Mouse right-click > Local Area Connection and Select Properties② Click Properties of [Internet Protocol Version 4(TCP/IPv4)] among Components.③ Click [Use the following IP address].④ Enter [192.168.1.2] for IP Address, [255.255.255.0] for Subnet Mask, and [192.168.1.1] for Default Gateway.Warranty InformationThis product is the result of high-class craftsmanship based on strict quality control procedures.• In case of Product failure or malfunction during normal usage, your product will be repaired free of charge within the Limited Warranty period.• The Consumer shall bear any labor or parts charges not covered by this Limited Warranty.• At the request for repair, you must provide the proof of purchase and the warranty.• Keep the warranty in a safe location because it is not reissued.The Consumers shall have no coverage or benets under this Limited Warranty if the Product has been :• Subjected to inappropriate use, improper storage, unauthorized repair, unauthorized modications, neglect abuse, inadequate installation, misuse, damage caused by shipping, etc.• Damaged from re, ooding, windstorm, lighting, earthquake, theft, blown fuse, internet viruses, worms, Trojan Horses, etc.• Treated with its Product Serial # removed or defaced.⑤ Click [Use the following DNS Server Address].⑥ For [Preferred DNS Server], enter the communication company server of each country.⑦ Click [OK]. Click [OK] again in the [Local Area Connection Properties] window.• For MAC OS X① From the "Apple" menu, Choose “System Preference..“② Click on the [Network] icon in the [Internet & Network] category.③ Click on the [Ethernet] option from the left hand side of the Network setting window.④ Select [Manually] option from the [Congure] drop-down menu.⑤ Enter [192.168.1.2] for IP Address, [255.255.255.0] for Subnet Mask, and [192.168.1.1] for Default Gateway.⑥ For [DNS Server], enter the communication company server of each country.⑦ Click [Apply].4. Run [MS-DOS] or [Command Prompt] and then perform PING Test with [192.168.1.1] A message [Reply from 192.168.1.1: bytes=32 time=1ms TTL=64] should appear when running [ping 192.168.1.1] command. If the result of the Ping test does not arrive properly, please contact the Customer Support Center.FCC Part 15.105This equipment has been tested and found to comply with thelimits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.FCC Part 15.19This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. FCC Part 15.21Changes or modifications not expressly approved by the manufacturer (or party responsible) for compliance could void the user’s authority to operate the equipment“This equipment should be installed and operated with minimum 20 cm between the radiator and your body.”](https://usermanual.wiki/Airspan-Networks/41AUETH/User-Guide-3308773-Page-2.png)
