Airspan Networks 41AUETH LTE indoor CPE User Manual SLC 130S41G Sprint manual en v1 0

Airspan Networks Inc LTE indoor CPE SLC 130S41G Sprint manual en v1 0

User Manual

Download: Airspan Networks 41AUETH LTE indoor CPE User Manual SLC 130S41G Sprint manual en v1 0
Mirror Download [FCC.gov]Airspan Networks 41AUETH LTE indoor CPE User Manual SLC 130S41G Sprint manual en v1 0
Document ID3308773
Application IDhueQ54cmR9sF4iuufkjyiQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize49.47kB (618405 bits)
Date Submitted2017-03-08 00:00:00
Date Available2017-09-04 00:00:00
Creation Date2017-02-20 10:25:40
Producing Software3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com)
Document Lastmod2017-02-22 01:57:22
Document TitleSLC-130S41G_Sprint_manual_en_v1.0
Document CreatorAdobe Illustrator CS5

Quick start guide
Package Contents
Part name of Device
WAN
AirEther
Connection Method
LAN
AirEther
LED Indicator
DC Adapter(5V1A)
● AirEther
(LTE Indoor CPE)
Indicator
POWER
● LAN Cable
● DC Adapter(5V1A)
LED indicator
NET
USB connector
Device Label
LAN
LTE RSSI(Received signal
strength indication) status :
Green ON
Logging into the built-in Web
Interface
PC Configuration
Go to WEB “192.168.1.1” then press ENTER to
access the login screen.
Click “Start” > Settings > Select “Control Panel”
> Click “Network and Internet” > Click
“Network Connections” > Mouse right-click
“Local Area Connection” and Select “Properties”
5 Click “OK” button
RSSI
(1~3)
LAN cable
For your computer to support Device,
please verify that the network device are
automatically find in the device panel.
In a Windows environment :
Select “Obtain an IP address automatically”
and “Obtain DNS server address automatically”
WAN is enabled : Green ON
USIM cover
WAN cable
3 Click “Properties” button
Working : Red ON
LTE is enabled : Green blinking
WAN
Select “Internet Protocol Version4 (TCP/IPv4)”
Function
Not connected(LTE, WAN)
● Quick start guide
Color
Trouble Shooting
Refer to the following if you are having trouble
connecting to the Internet :
1. Check the LED status of Device.
• Check if the POWER LED is illuminated.
• Check if the LED of LTE is illuminated.
• For LAN port, check if the lamp of the port
connected to the PC is illuminated.
2. Check the IP address of PC.
• For Windows 7/8/10
• Run [Command Prompt] and enter the
[ipconfig] command to check the [IP address].
3. If IP Address is not normal – Set the IP Address
of the PC manually.
• For Windows 7/8/10
① Start > Control Panel > Network and Internet
> Network Connections > Mouse right-click
> Local Area Connection and Select Properties
② Click Properties of [Internet Protocol Version 4
(TCP/IPv4)] among Components.
③ Click [Use the following IP address].
④ Enter [192.168.1.2] for IP Address, [255.255.255.0] for
Subnet Mask, and [192.168.1.1] for Default Gateway.
Warranty Information
⑤ Click [Use the following DNS Server Address].
⑥ For [Preferred DNS Server], enter the communication
company server of each country.
⑦ Click [OK]. Click [OK] again in the [Local Area Connection
Properties] window.
• For MAC OS X
① From the "Apple" menu, Choose “System Preference..“
② Click on the [Network] icon in the [Internet & Network] category.
③ Click on the [Ethernet] option from the left hand side of the
Network setting window.
④ Select [Manually] option from the [Configure] drop-down menu.
⑤ Enter [192.168.1.2] for IP Address, [255.255.255.0] for
Subnet Mask, and [192.168.1.1] for Default Gateway.
⑥ For [DNS Server], enter the communication company server
of each country.
⑦ Click [Apply].
4. Run [MS-DOS] or [Command Prompt] and then
perform PING Test with [192.168.1.1]
A message [Reply from 192.168.1.1: bytes=32 time=1ms TTL=64]
should appear when running [ping 192.168.1.1] command.
If the result of the Ping test does not arrive properly,
please contact the Customer Support Center.
This product is the result of high-class
craftsmanship based on strict quality control
procedures.
• In case of Product failure or malfunction during
normal usage, your product will be repaired free of
charge within the Limited Warranty period.
• The Consumer shall bear any labor or parts charges
not covered by this Limited Warranty.
• At the request for repair, you must provide the
proof of purchase and the warranty.
• Keep the warranty in a safe location because it is
not reissued.
The Consumers shall have no coverage or benefits
under this Limited Warranty if the Product has been :
• Subjected to inappropriate use, improper storage,
unauthorized repair, unauthorized modifications,
neglect abuse, inadequate installation, misuse,
damage caused by shipping, etc.
• Damaged from fire, flooding, windstorm, lighting,
earthquake, theft, blown fuse, internet viruses,
worms, Trojan Horses, etc.
• Treated with its Product Serial # removed or defaced.
FCC Part 15.105
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation is
subject to the condition that this device does not cause harmful
interference.
FCC Part 15.21
Changes or modifications not expressly approved by the
manufacturer (or party responsible) for compliance could void
the user’s authority to operate the equipment
“This equipment should be installed and operated with
minimum 20 cm between the radiator and your body.”
Purchase date
Quality warranty
period
1(one) year
Seller
Telephone number
Consumer
Name
Address
Telephone number
E-mail
Method of folding Quick Start Guide
300mm
80mm
160mm
60mm

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Create Date                     : 2017:02:20 10:25:40+10:00
Creator                         : Adobe Illustrator CS5
Title                           : SLC-130S41G_Sprint_manual_en_v1.0
Trapped                         : False
Modify Date                     : 2017:02:22 01:57:22Z
Producer                        : 3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com)
Page Count                      : 3
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PID41AUETH

Navigation menu