Airspan Networks H4K700 Base station of LTE fixed cellular sys User Manual AirHarmony 4000 DC Integrated External Duplexers
Airspan Networks Inc Base station of LTE fixed cellular sys AirHarmony 4000 DC Integrated External Duplexers
Users Manual
AirHarmony-4000 DC Installation Guide Integrated External Duplexers Part Number: UGD-D01123 System Release: 15.0 Revision: A Published: August 2016 © Copyright by Airspan Networks Ltd., 2016-2016. All rights reserved worldwide. Legal Notices The information contained within this document is proprietary, privileged and intended only for the recipient. As such, the information is subject to all relevant copyright, patent and other laws protecting intellectual property, as well as any specific agreements protecting Airspan Networks Ltd. rights in the aforesaid information. Neither this document nor the information contained herein may be published, reproduced, transmitted or disclosed to third parties, in whole or in part, without the express, prior, written permission of Airspan Networks Ltd. In addition, any use of this document or the information contained herein for the purposes other than those for which it is disclosed is strictly forbidden. Airspan Networks Ltd. reserves the right, without prior notice or liability, to make changes in equipment design or specifications. Information supplied by Airspan Networks Ltd. is believed in good faith to be accurate and reliable, while every care has been taken in preparing these documents. However, Airspan Networks Ltd. does not make any representations and gives no warranties of whatever nature in respect of these documents, including without limitation, the accuracy or completeness of any information, facts and/or opinions contained therein. No responsibility is assumed by Airspan Networks Ltd. for the use of the documents nor for the rights of third parties which may be effected in any way by the use thereof. The provision of these documents (and the documents themselves) does not constitute professional advice of any kind. Any representation(s) in these documents concerning performance of Airspan Networks Ltd. product(s) are for informational purposes only and are not warranties of future performance, either expressed or implied. Airspan Networks Ltd., its affiliates, directors, employees and agents shall not be held liable for any damages or losses, of any nature whatsoever, arising from any use of and/or reliance on the documents. These documents may contain flaws, omissions or typesetting errors; no warranty is granted nor liability assumed in relation thereto unless specifically undertaken in Airspan Networks Ltd. sales contract or order confirmation. Information contained herein is periodically updated and changes will be incorporated into subsequent editions. If you have encountered an error, please notify Airspan Networks Ltd. Product performance figures quoted within this document are indicative and for information purposes only. UK WEEE Registration number: WEEE/AB0207WZ. For more information, see WEEE Information for Airspan Customers and Recyclers. Acknowledgements © Intel Corporation http://www.intel.com/ © Microsoft Corporation http://www.microsoft.com Table of Contents Document Information ...................................................................................... 1 Abstract ................................................................................................................................. 1 Revision History ..................................................................................................................... 1 Warnings and Cautions ...................................................................................... 2 Human Exposure to Radio Frequencies ................................................................................ 2 Radio Interference ................................................................................................................ 2 Modifications ........................................................................................................................ 2 General .................................................................................................................................. 2 Important Safety Instructions ......................................................................................... 3 Safety..................................................................................................................................... 3 Warning of Hazardous Voltages ............................................................................................ 3 Adherence to European Directive 1999/5/EC....................................................................... 4 Warning Symbols .................................................................................................................. 4 Service Information ............................................................................................................... 4 UL Information ...................................................................................................................... 5 Lightning Protection .............................................................................................................. 5 Outdoor Ethernet Cabling ..................................................................................................... 5 DECLARATION OF CONFORMITY ........................................................................................... 6 GPS Compliance .................................................................................................................... 7 Maximum Output TX Total Power...................................................................... 7 Power Consumption – Supply and Current ........................................................................... 8 Antenna System .................................................................................................................... 9 External Antenna ................................................................................................................... 9 About This Document ...................................................................................... 10 Purpose ............................................................................................................................... 10 Intended Audience .............................................................................................................. 10 Document Conventions....................................................................................................... 10 UGD-D01080 Airspan Commercial and Internal Use AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Document Organization ...................................................................................................... 12 Related Reading .................................................................................................................. 12 Customer Care Help Desk ................................................................................ 13 Airspan Encourages Comments .......................................................................................... 13 1 Introduction ................................................................................................. 14 1.1 AirHarmony-4000 ........................................................................................................ 14 1.2 Deployment ................................................................................................................. 14 1.3 Related AirHarmony 4000 DC INT EXT Variants .......................................................... 16 2 Getting Started ............................................................................................ 17 2.1 Workflow of Installation .............................................................................................. 17 2.2 AirHarmony-4000 DC INT EXT Installation Checklist ................................................... 18 3 Verifying Prerequisites ................................................................................. 18 3.1 Verifying Site Requirements ........................................................................................ 18 3.2 Verify Installation Requirements ................................................................................. 18 3.2.1 Verify the Tools ........................................................................................................... 18 3.2.2 Verify the Parts and Kits .............................................................................................. 19 3.2.3 Power Supply and Current .......................................................................................... 20 3.2.4 Panels .......................................................................................................................... 22 3.2.5 Physical Dimensions .................................................................................................... 23 3.2.6 Environmental ............................................................................................................. 23 4 Installing AirHarmony-4000 DC INT EXT ....................................................... 25 4.1 Connecting the GPS Antenna ...................................................................................... 25 4.2 Pole/Wall Mount Assembly ......................................................................................... 25 4.2.1 Mounting on a Wooden Pole ...................................................................................... 26 4.2.2 Mounting on a Non-Wooden Pole .............................................................................. 28 4.2.3 Mounting on a Wall ..................................................................................................... 29 4.3 Securing AirHarmony-4000 to the Mounting Plate ..................................................... 31 5 AirHarmony-4000 DC INT EXT Connections.................................................. 35 5.1 Grounding .................................................................................................................... 35 UGD-D01123 Airspan Commercial and Internal Use ii AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide 5.2 Remote Antenna Assembly ......................................................................................... 35 5.2.1 Connecting RF Jumper Cables to External Antenna .................................................... 35 5.2.2 Weather-proofing the Antenna Connections ............................................................. 36 5.3 Cable Connections ....................................................................................................... 36 5.3.1 Copper Ethernet Cable Assembly ................................................................................ 36 Hardware Requirements ........................................................................................................ 36 Assembly Instructions............................................................................................................. 36 5.4 Fiber Ethernet (SFP) Cable Installation ........................................................................ 37 5.4.1 SFP Cable Connection.................................................................................................. 38 5.5 Connecting the DC Power Cable to AirHarmony-4000 DC INT EXT ............................. 39 5.5.1 Connecting the DC Power Cable to AirHarmony ......................................................... 40 5.5.2 AC/DC Power Converter – Optional ............................................................................ 41 A Job Sheet ..................................................................................................... 42 B Abbreviations............................................................................................... 43 Figures Figure 1: AirHarmony-4000 DC INT EXT with Integrated External Duplexers......................................... 9 Figure 2: AirHarmony-4000 DC INT EXT ................................................................................................ 15 Figure 3: Workflow................................................................................................................................ 17 Figure 4: AirHarmony-4000 DC INT EXT Unit, Bottom panel ................................................................ 22 Figure 5: AirHarmony-4000 DC INT EXT Unit, Top panel ...................................................................... 23 Figure 6: Attaching GPS antenna to unit............................................................................................... 25 Figure 7: Pole/Wall mounting plate ...................................................................................................... 26 Figure 8: Mounting plate on pole ......................................................................................................... 27 Figure 9: Through-bolt & Mounting plate............................................................................................. 28 Figure 10: Pole/Wall mounting plate (w/o bolt) ................................................................................... 28 Figure 11: Mounting plate mounted..................................................................................................... 29 Figure 12: Mounting Plate on Wall ....................................................................................................... 30 Figure 13: Lift unit and fit the slotted holes unto studs on top of mounting plate .............................. 31 Figure 14: Align Pins .............................................................................................................................. 31 Figure 15: AirHarmony mounted on Wooden Pole .............................................................................. 32 Figure 16: AirHarmony mounted on Concrete Pole ............................................................................. 33 Figure 17: AirHarmony being mounted on a Wall ................................................................................ 34 Figure 18: Grounding ............................................................................................................................ 35 Figure 19: Gland connector - copper .................................................................................................... 36 Figure 20: Ethernet Cable through connector ...................................................................................... 37 Figure 21: LC duplex cable assembly .................................................................................................... 38 UGD-D01123 Airspan Commercial and Internal Use iii AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Figure 22: Cable connector hook up to the board connector .............................................................. 38 Figure 23: Slide on inner housing.......................................................................................................... 39 Figure 24: Slide over and click............................................................................................................... 39 Figure 35: attaching power cable to AirHarmony ................................................................................. 40 Figure 36: Optional AC/DC Converter ................................................................................................... 41 Tables Table 1: AirHarmony--4000 DC INT EXT FCC Maximum Output TX Total Power .................................... 7 Table 2: AirHarmony-4000 DC INT EXT ETSI Maximum Output TX Total Power .................................... 7 Table 3: Power Consumption .................................................................................................................. 8 Table 4: Typographic Conventions ........................................................................................................ 10 Table 5. AirHarmony 4000 DC Integrated External Duplexers Variants ............................................... 16 Table 6. Minimum Hardware Requirements ........................................................................................ 18 Table 7. Parts & Kits .............................................................................................................................. 19 Table 8. Amperage Draw....................................................................................................................... 21 Table 9: AirHarmony-4000 Physical Dimensions .................................................................................. 23 Table 10: AirHarmony-4000 Environment Compliance ........................................................................ 24 Table 11: Cable Hardware ..................................................................................................................... 36 Table 12: AC/DO Converter Specifications ........................................................................................... 41 Table 13: Job Sheet ............................................................................................................................... 42 UGD-D01123 Airspan Commercial and Internal Use iv AirHarmony-4000 (Integrated External Duplexers) Installation Guide Document Information Abstract This document details procedures for installing the Ai spa ’s Ai Ha o -4000 DC INT EXT, a Macroclass eNodeB variant and its place in the Airspan product suite. This document is intended for qualified personnel with a working knowledge of LTE. Revision History Revision Details Date Rev 0.1 - 0.4 August 2016 Initial document – draft comments Rev A TBD 2016 Published Summary of Changes This document is available at: AirHarmony 4000 DC INT EXT Installation Guide UGD-D01123 Airspan Commercial and Internal Use AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Warnings and Cautions Human Exposure to Radio Frequencies The AirHarmony-4000 DC INT EXT antennas should be operated from a minimum safe distance of 3.90 m Radio Interference The AirHarmony-4000 DC INT EXT generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the technician is encouraged to try to correct the interference by performing one or more of the following measures: Re-orientate or relocate the unit Increase separation between the units and/or End Devices Connect the equipment to an outlet on a circuit different from that to which the power source is connected Modifications Any changes and modifications to this device that are not expressly approved by Airspan Networks may void the user's authority to operate the equipment. General Only qualified personnel should be allowed to install, replace, and service the equipment. The device cannot be sold retail, to the general public or by mail order. It must be sold to operators. Installation must be controlled. Installation must be performed by licensed professionals. Installation requires special training. The AirHarmony-4000 DC INT EXT should be installed ONLY by experienced installation professionals who are familiar with local building and safety codes and, wherever applicable, are licensed by the appropriate government regulatory authorities. Failure to do so may void Airspan's product warranty and may expose the end user or the service provider to legal and financial liabilities. Airspan and its resellers or distributors are not liable for injury, damage or violation of regulations associated with the installation of outdoor units or antennas. The device is to be installed in a Restricted Access Location. Power provided by PoE output cannot be considered limited power source (LPS) per IEC/UL 60950-1 clause 2.5. Connection to the PoE port is permitted only by certified electrician according to NEC requirements. Connect PoE terminal only to e uip e t hi h does ΠOT e ui e ΚP“ o l feedi g. Surge Arrestors and Transient Voltage Surge Suppressors installed external to the ITE are required to comply with the appropriate CEC/NEC requirements. Equipment connected to the PoE port must have its own fire enclosure. UGD-D01123 Airspan Commercial and Internal Use AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Important Safety Instructions Read and Save these instructions This Installation Guide contains instructions and warnings that should be followed during installation, and operation. Failure to follow these instructions could cause bodily injury and/or product failure Safety 1. Read this guide and follow all operating and safety instructions. 2. Keep all product information for future reference. 3. Static sensitive components inside - do not remove the lid or base: No user serviceable parts inside. 4. Position the power cord to avoid possible damage, do not overload circuits. 5. Do not place this product on or near a direct heat source, and avoid placing objects on the terminal. 6. To avoid electrical shock do not install this device during adverse conditions such as rain or inclement weather. 7. Use only a damp cloth for cleaning. Do not use liquid or aerosol cleaners. Disconnect the power before cleaning. 8. The units should not be located too near power lines or other electrical power circuits, where it can come into contact with such power lines or circuits. 9. The radio transceiver must be properly grounded to protect against power surges and a u ulated stati ele t i it . It is the use ’s espo si ilit to i stall this de i e i accordance with the local electrical codes. 10. Installation of the AirHarmony-4000 DC INT EXT must be contracted to a professional installer. 11. The circuit breaker should be easily accessible in case you have to disconnect the device. 12. When installed in the final configuration, the product must comply with the applicable Safety Standards and regulatory requirements of the country in which it is installed. If necessary, consult with the appropriate regulatory agencies and inspection authorities to ensure compliance. Warning of Hazardous Voltages On AC installations, hazardous voltages exist. Use caution when verifying or working with AC power. Remove metal jewelry that could come into contact with AC power. On DC sections, short-circuiting the low voltage, low impedance circuits can cause severe arcing that may result in burns or eye damage. Remove rings, watches etc. to avoid shorting DC circuits. Note: Airspan products do not contain hazardous substances (as defined in UK Control of Substances Hazardous to Health Regulations 1989 and the Dangerous Substances Regulations 1990). At the end of any Airspan products life cycle, the customer should consult with Airspan to ensure that the product is disposed of in conformance with the relevant regulatory requirements. UGD-D01123 Airspan Commercial and Internal Use AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Adherence to European Directive 1999/5/EC European Council Recommendation 1999/5/EC details basic restrictions and reference levels on human exposure to electromagnetic fields as advised by the ICNIRP. Adherence to these recommended restrictions and reference levels should provide a high level of protection as regards the established health effects that may result from exposure to electromagnetic fields Airspan equipment is compliant with CE and R&TTE regulations and can be operated in all EU (European Union) locations listed below: Country Code BE EL LT PT BG ES LU RO CZ FR HU SI DK HR MT SK DE IT NL FI EE CY AT SE IE LV PL UK Warning Symbols The following symbols may be encountered during installation or troubleshooting. These warning symbols mean danger. Bodily injury may result if you are not aware of the safety hazards involved in working with electrical equipment and radio transmitters. Familiarize yourself with standard safety practices before continuing. Caution, hot surface Caution Electro-Magnetic Radiation High Voltage Service Information Refer all repairs to qualified service personnel. Do not modify any part of this device, as this will void the warranty. Disconnect the power to this product and return it for service if the following conditions apply: a. The terminal does not function after following the operating instructions outlined in this manual. b. The product has been dropped or the housing is damaged. Locate the serial number of the terminal and record this on your registration card for future reference. Also record the MAC address, located on the product sticker. UGD-D01123 Airspan Commercial and Internal Use AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide UL Information - The equipment must be properly grounded according with NEC and other local safety code requirements. - Reminder to all the BWA system installers: Attention to Section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as is practical. - AirHarmony-4000 DC is designed to operate in environmental conditions complying with IP66 and relevant standards. Lightning Protection WARNING: The following notes are general recommendations for the system. The wireless equipment should be installed by a qualified professional installer and must follow local and national codes for electrical grounding and safety. Failure to meet safety requirements and/or use of nonstandard practices and procedures could result in personal injury and damage to equipment. A direct lightning strike may cause serious damage even if these guidelines are followed. All outdoor wireless equipment is susceptible to lightning damage from a direct hit or induced current from a near strike. Lightning protection and grounding practices in local and national electrical codes serve to minimize equipment damage, service outages, and serious injury. Reasons for lightning damage are summarized as: - Poorly grounded tower/antenna sites that can conduct high lightning strike energy into equipment. - Lack of properly installed lightning protection equipment that can cause equipment failures from lightning induced currents. A lighting protection system provides a means by which the energy may enter earth without passing through and damaging parts of a structure. A lightning protection system does not prevent lightning from striking; it provides a means for controlling it and preventing damage by providing a low resistance path for the discharge of energy to travel safely to ground. Improperly grounded connections are also a source of noise that can cause sensitive equipment to malfunction. A good tower grounding system disperses most of the surge energy from a tower strike away from the building and equipment. To limit the equipment damage due to a lightning strike, the following practices are recommended for the wireless system: - Provide direct grounding from the antenna mounting bracket, the radio and antenna and the lightning/surge protectors to the same ground point at the base of the tower or a ground bus on the building. Use the grounding screws on the antenna bracket and the radio and antenna for terminating the ground wires. - The circuit ground must be connected to the same grounding system as the eNodeB. Outdoor Ethernet Cabling - Ethernet cable connected to should be outdoor grade with UV protection. - Use shielded out CAT5e (minimum) cabled terminated with metallic RJ45 connectors. UGD-D01123 Airspan Commercial and Internal Use AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide - In order to protect the indoor unit, install surge protection circuits on all copper cables on their entrance to the building. - Surge protection circuit must use a minimum 16AWG grounding cable. DECLARATION OF CONFORMITY European Community, Switzerland, Norway, Iceland, and Liechtenstein Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Deutsch: Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprecheneden Vorgaben der Richtlinie 1999/5/EU. Dansk: Dette udstyr er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i Directiv 1999/5/EF. Español: Este equipo cumple con los requisitos esenciales asi como con otras disposiciones de la Directive 1999/5/EC. Greek: Η ΑΙ Ι Α Ι Α Ai spa Η Ω Ι Ι Ι ΙΑ Α Ι Η Ι Η ΙΑ 1 Ω /5/ ΑΙ Ι ΙΩ Ι Α ΑΙ Η Ι Français: Cet appareil est conforme aux exigencies essentialles et aux autres dispositions pertinantes de la Directive 1999/5/EC. Íslenska: Þessi búnaður samrýmist lögboðnum kröfum og öðrum ákvæðum tilskipunar 1999/5/ESB. Italiano: Questo apparato é conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/EC. Nederlands: Deze apparatuur voldoet aan de belangrijkste eisen en andere voorzieningen van richtlijn 1999/5/EC. Norsk: Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-directiv 1999/5/EC. Português: Este equipamento satisfaz os requisitos essenciais e outras provisões da Directiva 1999/5/EC. Suomalainen: Tämä laite täyttää direktiivin 1999/5/EY oleelliset vaatimukset ja on siinä asetettujen muidenkin ehtojen mukainen. UGD-D01123 Airspan Commercial and Internal Use AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Svenska: Denna utrustning är i överensstämmelse med de väsentliga kraven och andra relevanta bestämmelser i Direktiv 1999/5/EC. Român: Acest echipament este în conformitate cu e i ţele ese ţiale şi alte p e ede i ele a te ale Di e ti ei 1999/5/CE. The Declaration of Conformity related to this product can be obtained from PLM@Airspan.com. GPS Compliance The GPS is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC." The GPS complies with the following EMC Common Regulatory Testing standards: EN55022: Radiated and Conducted Emissions CISPR 22: Class B EN 50081-1: Generic Emissions Class B EN 50082-1: Generic Immunity Class B EN 61000-4-2: Electrostatic Discharge Immunity EN 61000-4-3: Radiated RF EM Field Immunity Test EN 61000-4-4: Electrical Fast Transient/Burst Test EN 61000-4-6: Conducted Immunity EN 61000-4-8: Magnetic Field Immunity Note: A GPS is recommended for synchronizing between LTE sectors. Note: An optional GPS Lightning/Surge protector is available from Airspan when installing the GPS antenna in a remote location for lightning prone deployments. Maximum Output TX Total Power Table 1: AirHarmony--4000 DC INT EXT FCC Maximum Output TX Total Power Frequency Band (MHz) 728-746 FCC TX (dBm) EIRP (dBm) Antenna Gain (dBi) 59.56 13.5 46.06 Table 2: AirHarmony-4000 DC INT EXT ETSI Maximum Output TX Total Power Frequency Band (MHz) 729-746 TX (dBm) 46 ETSI EIRP (dBm) Antenna Gain (dBi) 59.5 13.5 Caution: Do not set maximum output TX power to higher than local regulations. UGD-D01123 Airspan Commercial and Internal Use AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Power Consumption – Supply and Current AirHarmony-4000 DC INT EXT supports direct connection to DC power source. DC Power Source requirements are: Operational Voltage Range: -40.5 to -57 VDC Max, 8A Max Safety approved (certified) according to IEC/EN/UL 60950-1 Transient Voltage: +150V (ETR283) The use of other power sources may impair safety AC power feed is also available, using an AC/DC power converter offered by Airspan. Warning: Power provided by PoE outputs (RJ45 ETH1, ETH2) cannot be considered limited power source (LPS) per IEC/UL 60950-1 clause 2.5 Table 3: Power Consumption Band Power Source Nominal Power Consumption (W) MAX Power Consumption with PoE (Instantaneous) (W) MAX Current with PoE (Instantaneous) (A) PoE Maximum Power Consumption (W) Power Supply Requirements (W) 2 x 43 B12 DC TBD TBD 60 400 2 x 43 B17 DC TBD TBD 60 400 Duplex Tx Power at RF Port (dBm) FDD FDD UGD-D01123 Airspan Commercial and Internal Use AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Antenna System AirHarmony-4000 DC INT EXT comes in a range of frequency variants that can be mounted with different antenna options and formats. A typical installation will have a cross-polar sector or dual slant antenna connected to the appropriate Integrated External Duplexers of the AirHarmony-4000 DC INT EXT variant unit. Various antennas are designed specifically for AirHarmony-4000 DC INT EXT deployments; specifications are available from Airspan separately. External Antenna The externally mounted antenna should be a dual slant or cross polarized fixed antenna which is connected via DIN connectors located on the Integrated Duplexers. The antenna should be mounted to its appropriate mounting facility. Figure 1: AirHarmony-4000 DC INT EXT with Integrated External Duplexers UGD-D01123 Airspan Commercial and Internal Use AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide About This Document Purpose This guide provides the workflow and step-by-step procedures for installing the Ai spa ’s AirHarmony-4000 DC INT EXT Macro-class eNodeB variant. These procedures include: Verify prerequisites Mount GPS Install Mounting bracket Install the AirHarmony-4000 DC INT EXT Mount Antenna (external antenna) Mount iRelay (if applicable) Connect to External Antenna (if applicable) Connect and manage cables Intended Audience This guide is intended for persons who are responsible for installing the AirHarmony-4000 DC INT EXT. These persons should have a working knowledge of the equipment. Ai Ha o a e tightl i teg ated ith Ai spa ’s iB idge a d iRela transport solutions. AirHarmony-4000 DC INT EXT supports an integrated PoE interface which powers and connects either iBridge, iRelay, or a third party WiFi Access Point. This configuration creates a single piece installation that supports full end to end IPv6 plug and play deployment by just adding power. For more details please refer to the iBridge and iRelay product specifications. Document Conventions This document uses the following typographic conventions. Table 4: Typographic Conventions Convention Element Blue underlined text Cross-reference links. Bold text Keyboard buttons and GUI elements. Command Command names or phrases. Computer output Text displayed by the computer. Hyperlinks Website and e-mail addresses. Danger Signifies a hazardous situation—if not avoided—will cause death or serious injury. Describes how to avoid it. Warning Signifies a hazardous situation—if not avoided—can cause death or serious personal injury. Describes how to avoid it. UGD-D01123 Airspan Commercial and Internal Use 10 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Convention Element Caution Signifies a hazardous situation—if not avoided—can void the product warranty, and cause property damage. Describes how to avoid it. Important Provides necessary information to explain a task. Note Provides additional information. Tip Provides helpful hints. UGD-D01123 Airspan Commercial and Internal Use 11 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Document Organization Chapter Contents Introduction Provides a comprehensive overview of AirHarmony-4000 DC INT EXT and its installation. Getting Started Provides workflows for initial install and workflow. Verifying Prerequisites Lists the hardware, software, and client requirements for installation. AirHarmony-4000 Installation Describes how to install AirHarmony-4000 DC INT EXT. GPS Installation Describes how to install the GPS antenna. Connect and Manage Cables Describes how to connect the cables. Job Sheet Provides information that aids users in performing the installation. Abbreviations Lists the abbreviations used in this document and their expansions. Related Reading The following documents contain related information: AirHarmony-4000 Hardware Product Specification Airspan LTE Commissioning Manual UGD-D01123 Airspan Commercial and Internal Use 12 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Customer Care Help Desk Ai spa ’s Customer Care Help Desk offers prompt and efficient customer support services. Note: To avail Airspa ’s Customer Care Help Desk support, you must be a registered user and must have a valid support contract. To register, click here and fill the Registration form. To create and update issue logs, send e-mails to Customer Care Help Desk. Once you submit your issue, the system generates a new issue and sends an issue number for your reference. The system uses this issue number to categorize and store e-mails under the appropriate issue. To help Customer Care Help Desk identify your issue, include the issue number and your Customer Care Helpdesk account details in all further communications. Main Operations Worldwide Headquarters Airspan Communications Ltd. Capital Point 33 Bath Road Slough, Berkshire SL1 3UF, United Kingdom Tel: +44-1895-467-100 Airspan Networks Inc. 777, Yamato Road, Suite 105 Boca Raton, FL 3341-4408, USA Tel: +1 561 893 8670 Airspan Encourages Comments Airspan welcomes any feedback and suggestions that help to improve the quality of the documentation. Send your feedback to documentfeedback@airspan.com. UGD-D01123 Airspan Commercial and Internal Use 13 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide 1 Introduction This se tio p o ides a des ipti e o e ie of the Ai spa ’s AirHarmony-4000 with Integrated External Duplexers a Macro-class eNodeB variant and its place in the Airspan product suite. This document is intended for readers with LTE working knowledge. All information in this document is for general information only, and is subject for change without notice. 1.1 AirHarmony-4000 AirHarmony-4000 is part of Ai spa ’s a ie -class LTE Advanced small cell eNodeB family. AirHarmony-4000 is a Macro-class product that supports 3GPP’s Long Term Evolution (LTE) eNodeB specifications, providing high-speed data, mobility, Voice over LTE, and broadcast/multicast services in order to meet the demands of the LTE Mobile Carriers. AirHarmony-4000 is a compact, easy to install Macro-class eNodeB, allowing an operator to deploy LTE broadband services using existing infrastructure or Street Furniture (e.g. street lamps, power poles, uildi g ooftop o sides et … AirHarmony-4000 employs Software Defined Radio (SDR) technology, together with two transmit and receive paths for each sector and a GPS antenna and receiver – all in a highly integrated, physically small and light, All-Outdoor package, targeted to blend seamlessly into the urban environment. This compact outdoor product minimizes physical footprint, power consumption and operator OPEX. AirHarmony-4000 is a 2T2R solution that enables a flexible deployment scenarios, but can achieve higher coverage and throughput by combing multiple eNodeBs enabling the support of 4T4R, 4T8R, and 8T8R. AirHarmony-4000 implements 2 x 20W transmitters (2 x 43 dBm) and fully supports the standard LTE (Uu/S1/X2) interfaces. All Airspan eNodeB products, including AirHarmony-4000, are interoperable with a rich portfolio of 3rd party end user devices, including many handsets, indoor UEs, outdoor UEs and USB dongles from several ODMs, using various chipsets. For an updated of interoperability list, please contact your nearest Airspan Sales Representative. Additionally, Ai Ha o a e tightl i teg ated ith Ai spa ’s iB idge a d iRela transport solutions. AirHarmony-4000 supports an integrated PoE interface which powers and connects either iBridge, iRelay, or a third party Wi-Fi Access Point. This configuration creates a single installation that fully supports end to end IPv6 plug and play deployment by just adding power. For more details please refer to the iBridge and iRelay product specifications. Note: For management please refer to the Airspan LTE Commissioning Manual as well as Netspan. 1.2 Deployment A highly flexible and scalable 4G Base Station, the AirHarmony-4000 DC INT EXT is capable of supporting LTE profiles across multiple frequency bands. UGD-D01123 Airspan Commercial and Internal Use 14 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Note: AirHarmony-4000 must be properly grounded (16AWG minimum) according to NEC and other local safety code requirements. Warning: Required - circuit breaker for AC power source -16A for EU installation and 20A for US installation. Minimum – 10A. Figure 2: AirHarmony-4000 DC INT EXT UGD-D01123 Airspan Commercial and Internal Use 15 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide 1.3 Related AirHarmony 4000 DC INT EXT Variants This document is related to AirHarmony 4000 DC power with integrated external duplexes variants. The following table lists the relevant variants: Table 5. AirHarmony 4000 DC Integrated External Duplexers Variants Band Product Code 12/17 Description DL Freq. UL Freq. Duplex Max Channel Dual Tx/Rx Tx Power (MHz) (MHz) Mode BW (MHz) Carrier Conf. Per Channel (dBm) HAR40-CN- AirHarmony 4000 700 MHz 729-746 699-716 U12-B06DP (B12/B17), Connectorized w FDD 15 No 2x2 43 Int. Ext. Duplexers, 2x Fiber + 2x Copper, PoE, DC 28H HAR40-CN- AirHarmony 4000 738- 793-803 738-748 U28H-B06DP 748 / 793-803MHz (B28), Connectorized w External Duplexers, 2x Fiber + 2x Copper, PoE, DC FDD 10 No 2x2 43 28 HAR40-CN- AirHarmony 4000 703- 758-803 703-748 U28-B06DP 748 / 758-803MHz (B28), Connectorized w External Duplexers, 2x Fiber + 2x Copper, PoE, DC FDD 20 No 2x2 43 UGD-D01123 Airspan Commercial and Internal Use 16 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Getting Started 2.1 Workflow of Installation The Workflow to install the AirHarmony-4000 DC INT EXT is displayed in the following diagram: Figure 3: Workflow Caution: Antennas must be connected and attached before AirHarmony-4000 DC INT EXT is powered on. UGD-D01123 Airspan Commercial and Internal Use 17 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide 2.2 AirHarmony-4000 DC INT EXT Installation Checklist Plan the installation of the AirHarmony-4000 DC INT EXT by using the Installation Checklist, which you can find as a removable job aid in Appendix A for this guide. 3 Verifying Prerequisites Prior to installing the AirHarmony-4000 DC INT EXT, verify the required safety, power, tools, parts and components. This chapter includes the hardware, software, and client requirements for installation. Important: Set up requirements for the installation is detailed in the Job Sheet, see Appendix_A. 3.1 Verifying Site Requirements To set up the AirHarmony-4000 DC INT EXT, an IP connection to a Netspan server is required. 3.2 Verify Installation Requirements 3.2.1 Verify the Tools Table 6. Minimum Hardware Requirements Tool Use #13 wrench for securing the M8 Hex Head bolts on the Pole/wall mount For AC power cable preparation Small flat blade screw driver (insulated shaft recommended) pliers For AC power cable preparation Knife For AC cable preparation Small side cutters For AC power cable preparation Wire strippers For AC power cable preparation / ” Socket Wrench UGD-D01123 For / ” He head (Lag) bolts when wall mounting Airspan Commercial and Internal Use 18 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide 3.2.2 Verify the Parts and Kits Note: Verify your order and requirements to ensure the correct unit type is being installed. Table 7. Parts & Kits Installation Kit / Part AirHarmony 4000 700 MHz (B12/B17), Connectorized Part No. AirHarmony 4000 universal wall & pole mounting kit HAR40-U-PMK1 AC/DC Indoor power converter AC-DC-IDUAir4G-W24 HAR40-CNU12-B06 DP Airspan N0. 998-53-126 Consisting of: 903-03-257 Image AirHarmony 4000 700 MHz (B12/B17), Connectorized w Int. Ext. Duplexers, 2x Fiber + 2x Copper, PoE, DC Pole/wall mount bracket Screws for connecting the unit Optional AC / DC Power Converter – Available from Airspan 133-00-061 AC/DC Power Converter for AirHarmony-4000 DC GPS Antenna GPS Antenna GPS-ANT-3 350-05-009 GPS Antenna with built-in high, interference rejection Or GPS Antenna Kit GPS-HAR-KIT-1 N/A AirHarmony GPS Kit (including antenna, bracket, 80cm cable and surge protection kit) Type-IC DC Power Cable 10m Type-IC DC Power Cable 15m Type-IC DC Power Cable 30m Type-IC DC Power Cable 50m - special order Type-IC DC Power Cable 75m - special order Type-IC DC Power Cable 10m PWR-10-INST-2 N/A Type-IC DC Power Cable PWR-15-INST-2 N/A Type-IC DC Power Cable PWR-30-INST-2 N/A Type-IC DC Power Cable PWR-50-INST-2 N/A Type-IC DC Power Cable PWR-75-INST-2 N/A Type-IC DC Power Cable PWR-10-INST-2 N/A Type-IC DC Power Cable DC Cables UGD-D01123 Airspan Commercial and Internal Use 19 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Installation Kit / Part Part No. Airspan N0. Consisting of: Image Full AXS SM Fiber Cable Full AXS SM Fiber Cable 5m, Outdoor LC/DPX to LC, IP67 Full AXS SM Fiber Cable 7.5m, Outdoor LC/DPX to LC, IP67 Full AXS SM Fiber Cable 15m, Outdoor LC/DPX to LC, IP67 Full AXS SM Fiber Cable 30m, Outdoor LC/DPX to LC, IP67 Full AXS SM Fiber Cable 50m, Outdoor LC/DPX to LC, IP67 Full AXS SM Fiber Cable 75m, Outdoor LC/DPX to LC, IP67 Full AXS SM Fiber Cable 100m, Outdoor LC/DPX to LC, IP67 Full AXS SM Fiber Cable 150m, Outdoor LC/DPX to LC, IP67 Full AXS SM Fiber Cable 200m, Outdoor LC/DPX to LC, IP67 FIB-FA-5-LCSM-1 686-00-016 FIB-FA-7.5-LCSM-1 686-00-017 FIB-FA-15-LCSM-1 686-00-015 FIB-FA-30-LCSM-1 686-00-009 FIB-FA-50-LCSM-1 686-00-010 FIB-FA-75-LCSM-1 686-00-011 FIB-FA-100-LCSM-1 686-00-012 FIB-FA-150-LCSM-1 686-00-013 FIB-FA-200-LCSM-1 686-00-014 3.2.3 Power Supply and Current AirHarmony-4000 DC INT EXT supports direct connection to AC power source: Operational Voltage Range: 100VAC~240VAC, 47Hz~63Hz Warning: Power provided by PoE outputs (RJ45 ETH1, ETH2) cannot be considered limited power source (LPS) per IEC/UL 60950-1 clause 2.5 UGD-D01123 Airspan Commercial and Internal Use 20 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Table 8. Amperage Draw Duplex Tx Power at RF Port (dBm) TDD-FC1 2 x 43 265 FDD 2 x 43 340 UGD-D01123 Maximum Power Consumption (W) Airspan Commercial and Internal Use 21 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide 3.2.4 Panels The following figures display the AirHarmony-4000 DC INT EXT bottom and top panels. The following displays the AirHarmony-4000 DC INT EXT’s otto panel. Figure 4: AirHarmony-4000 DC INT EXT Unit, Bottom panel UGD-D01123 Airspan Commercial and Internal Use 22 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide The following displays the AirHarmony-4000 DC INT EXT’s top panel. Figure 5: AirHarmony-4000 DC INT EXT Unit, Top panel 3.2.5 Physical Dimensions AirHarmony-4000 DC INT EXT is in an all outdoor enclosure. Table 9: AirHarmony-4000 Physical Dimensions Variant Dimensions (H x W x D) AirHarmony-4000 DC 631 x 236 x 267 mm / 24.8 x 9.3 x 10.5 inch Weight Main Unit (with integrated external duplexers) 27 Kg / 59.52 Lbs. Universal mounting bracket 3 Kg / 6.6 Lbs. 3.2.6 Environmental AirHarmony-4000 DC INT EXT meets the following environmental requirements: GR-63 Storage and Transportation UGD-D01123 Airspan Commercial and Internal Use 23 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide ETSI EN 300-019-1-4 Operational (non-weather protected equipment) ETSI EN 300-019-1-1 Storage (weather protected, non-temperature controlled locations) ETSI EN 300-019-1-2 Transportation Table 10: AirHarmony-4000 Environment Compliance Type Details Standard Compliance Operating temperature -40°C to 55°C / -40°F to 131°F ETSI 300 019 1-4 Operating humidity 5% - 100% non-condensing ETSI 300 019 1-4 Storage temperature -40°C to 70°C N/A Storage humidity 5% - 100% non-condensing ETSI 300 019 1-4 Rain and dust ingress protection IP66 N/A 70-106 kPa as well as: Operational altitude From -60m to 1800m @ 40C ETSI 300 019 1-4 From 1800m to 4000m @ 30C Solar radiation UGD-D01123 1120 W/m2 Airspan Commercial and Internal Use ETSI 300 019 1-4 24 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide 4 Installing AirHarmony-4000 DC INT EXT Install the AirHarmony-4000 DC INT EXT eNodeB by pole/wall mount. AirHarmony-4000 DC INT EXT is mounted on a pole or wall in close proximity to its external antenna (connectorized variant). Remove the AirHarmony-4000 from its packaging in preparation for mounting. Caution: Proper local rigging and hoisting practices should be followed when installing the AirHarmony-4000 on pole or wall. 4.1 Connecting the GPS Antenna Prior to installation of the AirHarmony the GPS antenna should be connected and after it is recommended that the connection should be weather-proofed. The following describes the connection of the GPS antenna which is installed directly to the top of the unit. 1. Remove the protective dust cap from the GPS antenna jack prior to mounting on the AirHarmony-4000 DC INT EXT. 2. Align the GPS jack with the plug on the top panel on the AirHarmony-4000 DC INT EXT. 3. Attach the GPS antenna to the TNC connector on the unit. Figure 6: Attaching GPS antenna to unit Caution: Take care not to over tighten so as not to damage the threads. Note: It is good practice to weather-proof all the antenna connections. This is done with a layer of self-amalgamating tape followed by an over layer of PVC tape. The weatherproofing the GPS connection is best done at this stage to give easier access to the connections. 4.2 Pole/Wall Mount Assembly Install the AirHarmony-4000 DC INT EXT eNodeB by pole/wall mount. AirHarmony-4000 DC INT EXT is mounted on a pole or wall in close proximity to its external antenna (connectorized variant). UGD-D01123 Airspan Commercial and Internal Use 25 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Caution: Proper local rigging and hoisting practices should be followed when installing the AirHarmony-4000. 4.2.1 Mounting on a Wooden Pole The following images show the pole mount assembly on a wooden pole. Caution: Take care to install the Pole/Wall mounting plate in the correct orientation. Verify that the mounting pins are facing upwards as shown below. Figure 7: Pole/Wall mounting plate 1. Select the location on the pole to mount the AirHarmony-4000. You can attach the AirHarmony-4000 to any pole from 1-7/8 to 16 inches (47.6 to 406.4 mm) in diameter. 2. Determine where to position the mounting plate on the pole and mark where to drill for insertion of the 3/8-16 through-bolt. Note: Threaded rod and necessary hardware are not supplied by Airspan and are the responsibility of the installer. UGD-D01123 Airspan Commercial and Internal Use 26 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide 3. Drill a minimum 7/16 hole to accept the 3/8-16 threaded rod. 4. Thread the 3/8-16 threaded rod into the provided clinch-nut attached on the Pole/Wall mounting plate. 5. Holding the mounting plate (with the attached threaded rod) pass the 3/8-16 threaded rod through the drilled hole in the pole. 6. Install on the exposed thread that protrudes from pole a flat washer, split washer, and the a 3/ -16 hex nut and tighten. 7. Insert the clamp bands by passing them through the slots in the mounting plate, in three (3) places. Note: The clamp bands are not supplied by Airspan and are the responsibility of the installer. Clamp bands should not be wider than 15.5 mm in order to fit in the slots on the mounting plate. 8. Tighten the clamp bands with large flat screwdriver. Figure 8: Mounting plate on pole UGD-D01123 Airspan Commercial and Internal Use 27 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Figure 9: Through-bolt & Mounting plate Mounting plate is installed and ready for AirHarmony-4000 mounting. 4.2.2 Mounting on a Non-Wooden Pole The following images show the pole mount assembly on a non-wooden pole. Caution: Take care to install the Pole/Wall mounting plate in the correct orientation. Verify that the mounting pins are facing upwards as shown below. Figure 10: Pole/Wall mounting plate (w/o bolt) UGD-D01123 Airspan Commercial and Internal Use 28 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide 1. Select the location on the pole to mount the AirHarmony-4000. You can attach the AirHarmony-4000 to any pole from 1-7/8 to 16 inches (47.6 to 406.4 mm) in diameter. 2. Insert the clamp straps through the slots in the mounting plate passing them through the pole clamps. 3. Insert the clamp bands by passing them through the slots in the mounting plate, in four (4) places. Note: The clamp bands are not supplied by Airspan and are the responsibility of the installer. Clamp bands should not be wider than 15.5 mm in order to fit in the slots on the mounting plate. 4. Tighten the clamp bands with large flat screwdriver. Figure 11: Mounting plate mounted 4.2.3 Mounting on a Wall The following images show the wall mount assembly. Caution: Take care to install the Pole/Wall mounting plate in the correct orientation. Verify that the mounting pins are facing upwards as shown below. 1. Position mounting plate against the wall with mounting pins facing up. Be sure to position the wall mounting plate straight with level mounting to ensure the unit sits evenly. 2. Mark the wall through the holes on the wall mount at the required height. UGD-D01123 Airspan Commercial and Internal Use 29 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide 3. Attach the mounting plate to the wall using Lag bolts (x8 recommended). Note: Lag bolts (x8) and necessary hardware are not supplied by Airspan and are the respo si ilit of the i staller. Re o e ded i i u ” dia. 8 with appropriate plugs according to field conditions. Figure 12: Mounting Plate on Wall UGD-D01123 Airspan Commercial and Internal Use 30 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide 4.3 Securing AirHarmony-4000 to the Mounting Plate Caution: Proper local rigging and hoisting practices should be followed when installing the AirHarmony-4000 on pole or wall. To mount AirHarmony-4000 to the mounting plate, perform the following: 1. Lift up the AirHarmony-4000 unit and hook the slotted holes onto the mounting pins (studs) on the top of the mounting plate. Figure 13: Lift unit and fit the slotted holes unto studs on top of mounting plate The following displays a close up of the Pin (stud) alignment. Figure 14: Align Pins UGD-D01123 Airspan Commercial and Internal Use 31 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide 2. Lean the bottom of the unit into the mounting plate until the six (6) holes are aligned with the six (6) M8 clinch-nuts on the mounting plate. There are two (2) on the top, near the mounting pins and two (2) on either side of the mounting plate for a total of six (6) . 3. Once aligned insert the supplied M8x20 Hex head bolt with a split washer and a flat washer into each clinch-nut. 4. Check and tighten all six (6) M8x20 Hex head bolts. The following displays the AirHarmony-4000 mounted on a wooden pole. Figure 15: AirHarmony mounted on Wooden Pole UGD-D01123 Airspan Commercial and Internal Use 32 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide The following displays the AirHarmony-4000 mounted on a concrete pole. Figure 16: AirHarmony mounted on Concrete Pole UGD-D01123 Airspan Commercial and Internal Use 33 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide The following displays the AirHarmony-4000 being mounted on a wall. Figure 17: AirHarmony being mounted on a Wall UGD-D01123 Airspan Commercial and Internal Use 34 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide 5 AirHarmony-4000 DC INT EXT Connections This section describes Grounding procedure, cable preparation and connections and external antenna assembly. 5.1 Grounding The AirHarmony-4000 DC INT EXT requires a secure ground connection. The ground cable should be connected with a grounding screw fitted with a flat washer and lock washer to the bottom of the chassis clearly marked with the universal ground symbol as shown below. The grounding screw (M6 x 16) is pre-installed during assembly. Figure 18: Grounding The cable should be grounded and bonded according to international or local standards. 5.2 Remote Antenna Assembly The AirHarmony-4000 DC INT EXT unit is be used with a remotely attached antenna. Fo i stallatio of a e otel ou ted a te a follo the a te a a ufa tu e ’s i st u tio s a d connect the antenna to the AirHarmony-4000 I teg ated E te al Duple e s’ RF o e to s fe ale DIN 4.1/9.5 connector) using the appropriate cables with a male DIN 4.1/9.5 connector. Caution: Take care not over tighten the RF connector. The connector nut should be tightened to a nominal torque of no more than 2.0 Nm (1.47 lb-ft). RF failures can result when the RF connector is over-tightened. 5.2.1 Connecting RF Jumper Cables to External Antenna The following describes how to connect the antenna cables to the Integrated Duplexers. 1. Attach, connect and secure the RF cable between the external antenna and the appropriate RF connection on the top of the Integrated Duplexers. Caution: Antennas must be connected and attached before AirHarmony is powered on. UGD-D01123 Airspan Commercial and Internal Use 35 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Caution: Power down AirHarmony prior to disconnecting antenna. 2. Weather-proof the RF connections. Note: The above is also applicable for replacement assembly. 5.2.2 Weather-proofing the Antenna Connections Weather-proofing of all the connections is required. This is done with a layer of self-amalgamating tape followed by an over layer of PVC tape. The weather-proofing is best done at this stage to give easier access to the connections. Note: Weather-proofing is best done at the assembly stage to give easier access to the connections. Weather-proofing is to be done to all RF connectors. Verify the RF connectors are completely weather-proof. 5.3 Cable Connections Note: The following images are for illustration purposes only. The actual tools or hardware may differ according to manufacturer. 5.3.1 Copper Ethernet Cable Assembly The following demonstrates the recommended assembly instructions, hardware and tool requirements for the proper Ethernet cable assembly of the Ethernet Category 5e (enhanced) (CAT5e) cable used by Airspan products. The Ethernet cable is connected using a standard RJ45 connector protected by a harsh environment protective casing. Hardware Requirements The following are the cable and connectors available from Airspan. Table 11: Cable Hardware Airspan Part Number Description CAT5e-STP-305M-R CAT5e Ethernet Cable, 305M (1000ft), STP, Reel RJ45-ETH-SHLD-CONN RJ45 Ethernet Connector, Shielded Assembly Instructions The Copper Ethernet cable is connected to the AirHarmony-1000 using a Gland connector assembled on the bottom panel of the unit, as shown below. Figure 19: Gland connector - copper UGD-D01123 Airspan Commercial and Internal Use 36 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide 1. Remove the Gland connector by unscrewing the body from the AirHarmony-1000, using the (supplied) Gland wrench. 2. Pass the prepared Ethernet cable through the tail nut, gland seal, body and front seal of the connector casing as shown below. Do not tighten the tail nut. Figure 20: Ethernet Cable through connector 3. Seat the RJ45 connector plug securely into the body cavity of the AirHarmony-4000 DC INT EXT. 4. Tighten the Gland body into to the threaded hole on the bottom of the AirHarmony4000 DC INT EXT. 5. Tighten the tail nut on to the body using the included Gland wrench, forcing the seal compress around the cable. 6. Once the connector is properly installed, the cable should be positioned and secured to minimize stress on the cable. 5.4 Fiber Ethernet (SFP) Cable Installation The Fiber Ethernet Small form-factor pluggable transceiver (SFP) must be connected to the AirHarmony -4000 using an outdoor fiber cable. The optical connection enables a one-hand installation of the connector. This enables the users to easily remove and replace the SFP transceiver module which eliminates the need to open the unit and expose its contents to hazardous weather conditions. Note: Airspan recommends using the Finisar - FTLF1318P3BTL 1000BASE-LX which has been tested and approved by Airspan. Available from Airspan if required. UGD-D01123 Airspan Commercial and Internal Use 37 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide 5.4.1 SFP Cable Connection Figure 21: LC duplex cable assembly 1. Remove the protective dust cap from the connector housing assembled on the unit. 2. Line up the SFP transceiver module with the port and slide it into the port. 3. Connect the cable connector onto the board connector. Figure 22: Cable connector hook up to the board connector 4. Verify that the locking latch on the cable connector is engaged on the board connector. 5. Slide the inner housing and ground shield (if present) over the cable and over the molding. UGD-D01123 Airspan Commercial and Internal Use 38 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Figure 23: Slide on inner housing Note: Check that there no space between the inner housing and mounting flange. Check and remove any debris that might interfere with the connection. 6. Slide the outer shell over the inner housing and turn the outer bayonet shell 1/4 turn clockwise, until it clicks into place. Figure 24: Slide over and click Note: The shell should be hand tightened only. Do NOT use tools to tighten the shell. Once the connector is properly installed, the cable should be positioned and secured to minimize stress on the cable and connector. 5.5 Connecting the DC Power Cable to AirHarmony-4000 DC INT EXT Danger: Hazardous voltage! Before working, ensure that the power is removed from the power connection cables. When the system is powered on, do not touch the power terminals. UGD-D01123 Airspan Commercial and Internal Use 39 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Tip: It is good practice to label both ends of the cable to identify which AirHarmony-4000 DC unit it is connected to. Tip: It is good practice to leave a spare loop of cable (approximately 0.5m). This will allow for easier wiring and will allow the cable to be re-terminated if necessary in the future. The power cable is connected to the AirHarmony-4000 DC connector (marked PWR) on the bottom panel of the unit. 5.5.1 Connecting the DC Power Cable to AirHarmony 7. 8. Plan the position of the DC power cable run from the AirHarmony unit to the power supply unit. The DC power cable is offered in various lengths, to fit different deployments. Uncoil the cable and secure the connector just below the AirHarmony unit. Note: When securing the cable make sure there is no tension on the connector so that it is easy to disconnect and re-connect for future maintenance actions. Caution: The internal plastic parts of the mating connector are keyed. Take care to align these by visual inspection or by gently rotating the connector body until the key way sections align and the pins go in before tightening the locking ring. 9. Position the pins correctly, the connector is secured to the unit with a locking ring that is screwed into place. Use firm hand pressure only, the connector has a built in sealing ring. Figure 25: attaching power cable to AirHarmony UGD-D01123 Airspan Commercial and Internal Use 40 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide 5.5.2 AC/DC Power Converter – Optional This section provides a description of the external AC/DC Power converter – Optional, available from Airspan. The third-party external AC/DC Power Converter is an optional unit that connects to the AirHarmony-4000 DC in the event there is no -48VDC availability at the site. Note: Airspan recommends using the AC/DC Power Converter for the AirHarmony-4000 DC. Available from Airspan if required. Figure 26: Optional AC/DC Converter AC/DC Power Converter Table 12: AC/DO Converter Specifications Model Type DC Details DC Voltage 48V Rated Current 12.5A Currebt Range 0 ~ 12.5A Rated Power 600W Voltage Adj. Range 41 ~ 56V Safety Standards UL60950-1, TUV EN60950-1 approved EMI Conduction & Radiation Compliance to EN55022 (CISPR22) Class B UGD-D01123 Airspan Commercial and Internal Use 41 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide A Job Sheet This job sheet enables the users to keep track of their installation. It covers all the prerequisites required for accomplishing the AirHarmony-4000 DC INT EXT installation. Table 13: Job Sheet Site Requirements Pole or wall for installation identified Position on pole or wall identified Pole access restrictions (highway regulations, other services on pole, power pole) Method of reaching pole positions (ladders, Elevated work platform) AC main fuse block available for AC/DC converter (where needed) Configuration programming details known Point of connection for Ethernet (if applicable) All equipment items available at the installation site: ● Main AirHarmony-4000 DC unit ● GPS Antenna ● Mounting bracket, through-bolt and pole clamps, or bolts if wall mount ● Copper Ethernet or SFP cable assembly ● Weather-proofing of the connections with a layer of self-amalgamating tape followed by an over layer of PVC tape. Tool Requirements (For further information, see Verify the Tools.) Large flat screw driver Small flat blade screw driver (insulated shaft recommended) Medium Philips head screw driver 13 mm wrench Knife pliers Small side cutters Wire strippers Required Ancillary Equipment Laptop PC for initial configuration Cable for temporary connection of the laptop Other installed materials Cable ties Labels (good to have) UGD-D01123 Airspan Commercial and Internal Use 42 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide B Abbreviations Term Expansion 3GPP 3rd Generation Partnership Project, responsible for LTE ABS Almost Blank Subframes ACS Adjacent Channel Selectivity is a measurement of a receiver's ability to process a desired signal while rejecting a strong signal in an adjacent frequency channel. ACS is defined as the ratio of the receiver filter attenuation on the assigned channel frequency to the receiver filter attenuation on the adjacent channel frequency. AWGN Additive White Gaussian Noise is a channel model in which the only impairment to communication is a linear addition of white noise with a constant spectral density and a Gaussian distribution of amplitude. BER Bit Error Rate CN Core Network CP Cyclic Prefix CTC Convolution Turbo Code is a high-performance forward error correction (FEC) code dB Decibel. A logarithmic unit used to describe a ratio (such as power ratio in radio telecommunications) dBm An abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). It is used as a convenient measure of absolute power because of its capability to express both very large and very small values in a short form. eNodeB Evolved Node B, is the element in E-UTRAN of LTE. ESP Encapsulating Security Payloads (ESP) provide confidentiality, data-origin authentication, connectionless integrity, an anti-replay service (a form of partial sequence integrity), and limited traffic-flow confidentiality E-UTRAN Evolved UMTS Terrestrial Radio Access Network, is the air interface of 3GPP's Long Term Evolution. EVM/RCE The Error Vector Magnitude or EVM (sometimes also called Receive Constellation Error or RCE) is a measure used to quantify the performance of a digital radio transmitter or receiver. It is measured in dB or percentage (%) – the lower the better. FDD Frequency-Division Duplexing. A transceiver mode where the transmitter and receiver operate at different carrier frequencies. GNSS Global Navigation Satellite System is a term used to describe a satellite navigation system with global coverage. There are currently two fully operational GNSSs – the US GPS and the Russian GLONASS GTP-U GPRS Tunneling Protocol for User data is a relatively simple IP based tunneling protocol which permits many tunnels between each set of end points HPBW Half Power BandWidth is the angular separation in an antenna, in which the magnitude of the radiation pattern decreases by 50% (or -3 dB) from the peak of the main beam ICS In- ha el sele ti it is a easu e of the e ei e ’s a ilit to e eive a wanted signal at its assigned Resource Block locations in the presence of an interfering signal IPSec Internet Protocol Security is a protocol suite for securing Internet Protocol (IP) communications by authenticating and encrypting each IP packet of a communication session LED Light Emitting Diode LTE Long Term Evolution MAC Medium Access Controller – responsible for several functions such Error Correction, Packet De Multiple i g, et … MBSFN Multicast-Broadcast Single Frequency Network is an LTE feature designed to deliver services such as Mobile TV using the LTE infrastructure, and is expected to be a competitor to DVB-Hbased TV broadcast UGD-D01123 Airspan Commercial and Internal Use 43 AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide Term Expansion MCS Modulation and Coding Scheme MME Mobility Management Entity is the key control-node for the LTE access-network. It is responsible, among other things for idle mode UE tracking and paging procedure including retransmissions MTBF Mean Time Between Failures OFDMA Orthogonal Frequency-Division Multiple Access (OFDMA) is a multi-user version of OFDM digital modulation scheme, used for eNodeB transmissions to UEs PDCP Packet Data Convergence Protocol. A Sub-Layer in LTE responsible for IP Header De Co p essio , et … PDU Protocol Data Unit PTP Precision Time Protocol is used to synchronize clocks throughout a network. In this document, PTP is referring to IEEE1588-2008 protocol RB Resource Block RLC Radio Link Control. A Sub-Layer in LTE responsible for Ack/Nack, error correction, packet eo de i g, et … ROHS Restriction Of Hazardous Substances RRM Radio Resource Management is used to cover all functions that are related to the assignment and sharing of radio resources among UEs S-GW Serving Gateway. A Core entity in the LTE EPC architecture responsible for routing and forwarding user data packets, while also acting as the mobility anchor for the user plane during inter-eNodeB handovers and as the anchor for mobility between LTE and other 3GPP technologies SBA Switched Beam Antenna SC-FDMA Single-Carrier FDMA is a frequency-division multiple access scheme, dealing with the assignment of multiple users to a shared communication resource. Used in LTE for UE transmissions to the eNodeB SCTP Stream Control Transmission Protocol is a reliable transport layer protocol, ensuring insequence transport of messages with congestion control like TCP SDR Software Defined Radio TDD Time-Division Duplexing. A transceiver mode where the transmitter and receiver operate on the same carrier frequency UE User Equipment. The end user in LTE WEEE Waste Electrical and Electronic Equipment UGD-D01123 Airspan Commercial and Internal Use 44
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract Author : M Falik Create Date : 2016:09:04 15:12:19+03:00 Keywords : Rev, 0.4 Modify Date : 2016:09:04 15:20:16+03:00 Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : M Falik Title : AirHarmony 4000 DC Integrated External Duplexers Subject : Rev 0.4 Creator Tool : Microsoft® Word 2013 Metadata Date : 2016:09:04 15:20:16+03:00 Producer : Microsoft® Word 2013 Document ID : uuid:31cc8565-1a22-4c06-a4a6-9265c7cd13f7 Instance ID : uuid:49313ebf-4a21-461b-aa19-3836e56b899c Page Count : 50EXIF Metadata provided by EXIF.tools