Alcatel Canada 31T28A04A22A Alcatel 7390 LMDS Broadband Wireless System - 31GHz User Manual 3cc12426aaaaTQbja01
Alcatel Canada Inc Alcatel 7390 LMDS Broadband Wireless System - 31GHz 3cc12426aaaaTQbja01
Contents
- 1. Base Station User Manual 1 0f 14
- 2. Base Station User Manual 2 0f 14
- 3. Base Station User Manual 3 0f 14
- 4. Base Station User Manual 4 0f 14
- 5. Base Station User Manual 5 0f 14
- 6. Base Station User Manual 6 0f 14
- 7. Base Station User Manual 7 0f 14
- 8. Base Station User Manual 8 0f 14
- 9. Base Station User Manual 9 0f 14
- 10. Base Station User Manual 10 0f 14
- 11. Base Station User Manual 11 0f 14
- 12. Base Station User Manual 12 0f 14
- 13. Base Station User Manual 13 0f 14
- 14. Base Station User Manual 14 0f 14
Base Station User Manual 10 0f 14
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 165608 |
| Application ID | LpJi/X4L/6aSQPjo4/xzAA== |
| Document Description | Base Station User Manual 10 0f 14 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 216.48kB (2705966 bits) |
| Date Submitted | 2001-08-21 00:00:00 |
| Date Available | 2001-09-18 00:00:00 |
| Creation Date | 2001-08-21 11:22:45 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-08-21 11:23:01 |
| Document Title | 3cc12426aaaaTQbja01.book |
| Document Creator | FrameMaker 6.0 |
7.5 – Sub-band distribution plan Cross-polarized radio Down-link Up-link LMCS/AB 27 850 ¾ 28 350 27 350 ¾ 27 650 LMCS/F 25 600 ¾ 25 850 25 350 ¾ 25 600 LMCS/C 27 100 ¾ 27 350 26 850 ¾ 27 100 LMDS/A 27 500 ¾ 28 350 31.075 ¾ 31 225 LMDS/B 31 225 ¾ 31 300 31 000 ¾ 31 075 38/700/1 39 700 ¾ 40 000 39 000 ¾ 39 300 (*) : figures given here represent the total bandwidth, i.e. from the lower edge of the lowest channel to the higher edge of the highest channel. 3CC12426AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 301/346 302 302/346 302 Issue 01 - April 2001 - Draft 04 3CC12426AAAA TQ BJA 01 Appendix 1 – Installation sheet A.1.1 – 7390DBS General information:Operator................. Date.......... Visa.......... ........................................................................................ Name Address No ......... Operator Street...................................................... Bld......... Stair................... Floor................. Town ............................................................. Country ......................................................... Site identification Name of Base Station Version Equipment characteristics Designation Reference ICS Serial No. Subrack Fan PSU 1 PSU 2 CPL IBS 1 IBS 2 IBS 3 IBS 4 IBS 5 IBS 6 IBS 7 IBS 8 3CC12426AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 303/346 308 Equipment characteristics and onboard software Designation Part number ICS Serial No. Downloaded software ANT 1 ANT 2 TNT 1 TNT 2 TNT 3 TNT 4 AMD 1 AMD 2 AMD 3 AMD 4 AMD 5 AMD 6 AMD 7 AMD 8 304/346 308 Issue 01 - April 2001 - Draft 04 3CC12426AAAA TQ BJA 01 A.1.2 – 7390 X-Pol RBS General information:Operator.................. Date............. Visa.......... ................................................................................... Name Address No ......... Bld......... Operator Street................................................ Stair................... Floor........... Town ............................................................. Country ......................................................... Site identification Name of Base Station Version Equipment characteristics Initial configuration (1+0): Designation Mains Reference ICS Serial No. Tx level Band Sub-band Type of cable Length of cable Cable attenuateur (upstream) Cable attenuateur (downstream) Tilt Azimuth Height of X-Pol RBS Type of Mounting 3CC12426AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 305/346 308 Redundancy (1+1): Designation Mains Reference ICS Serial No. Tx level Band Sub-band Onboard software version Type of cable Length of cable Tilt Azimuth Height of X-Pol RBS Type of Mounting 306/346 308 Issue 01 - April 2001 - Draft 04 3CC12426AAAA TQ BJA 01 A.1.3 – Check point list for BS commissioning CHECKING THE SAFETY REGULATIONS: – Equipment ground wire OK NOK – Differential protection OK NOK – Fire protection OK NOK – No contaminants or possible outflow on the antennas and radio OK NOK – No personnel allowed in the antenna fields OK NOK – Use of torque wrenchs for the radio assembly OK NOK – Mast rigidity and absence of vibration OK NOK – Antenna clearance in immediate vicinity OK NOK – Check that the ET390998 coaxial cable is installed OK NOK – Radio grounding OK NOK – No crushed cables OK NOK – Observance of the minimum bend radius OK NOK – Quality of cable ground wire installation OK NOK – Sealing of ground relays on the cable OK NOK – Min Max temperature of the premises containing the DBS (-5º to +55ºC) OK NOK – Check air inlets and outlets of the DBS backplane OK NOK – Check the 48 Volt polarity OK NOK – Check the ground wire of the DBS backplane OK NOK – Check that all the client access cables are shielded OK NOK – On the DBS panel, J101, J104 and J113 must not be connected OK NOK – Check the optical fiber routing OK NOK – Check the connection sequence of the X-Pol RBS cables on the panel OK NOK CHECKING THE RADIO INSTALLATION: CHECKING THE WIRING BETWEEN X-Pol RBS AND DBS: CHECKING THE DBS INSTALLATION: 3CC12426AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 307/346 308 PAGE INTENTIONALLY LEFT BLANK 308/346 308 Issue 01 - April 2001 - Draft 04 3CC12426AAAA TQ BJA 01 Appendix 2 – Installation of 7390LT software A.2.1 – Requirements 1. Microsoft Windows NT operating system running (Service Pack 5 or above) 2. A7390LT installation Kit 3. User account with Administrator privileges to log-on with Note: Users without Administrator privileges will not be able to install SNTP service, required to run properly the A7390LT. A.2.2 – Installation Procedure 1. Be sure you have administrator rights 2. Close all the aplications before start the 7390LT Installation 3. Insert the CD " 7390LT Software Package" • The window " 7390LT Software Package" appears 3CC12426AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 309/346 324 • Click on "Install Software" • The window "Install Software" appears • Click on "7390LT Application Software Release 2.2a" 4. When the "Welcome" screen appears (see below), click on "Next" button to continue the installation 310/346 324 Issue 01 - April 2001 - Draft 04 3CC12426AAAA TQ BJA 01 procedure or press "cancel" to exit the installation program. 5. The "Choose Destination Location" screen appears (see below). If you agree with the default destination folder, click on the "Next" button. If you disagree, you can change it by clicking on "Browse" button and selecting the desired destination folder. Nota : – If you use always the default directory, un-install the previous LT version before. – If you want to install several LT versions on the same computer, use different folders at each time. 6. The "Select Program Manager Group" screen appears (see below). If you agree with the default 3CC12426AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 311/346 324 group name, click on "Next" button. If you disagree, you can change it by typing the desired name. Note: If you want to install several LTs on the same computer use different names for the Program group. 7. The "Start Installation" screen appears (see below). Now, you are ready to install the A7390LT (Craft Terminal) in your computer. Click on the "Next" button to install it. You can cancel the LT installation by clicking on the "cancell" button or you can chnage some of the choosen options by clicking on the "Back" button. 312/346 324 Issue 01 - April 2001 - Draft 04 3CC12426AAAA TQ BJA 01 8. The following window appears indicating that the LT installation is running. 9. If you dont't have administrator rights, the following window appears. The LT installation has not been completely succesful, so you have to get administrator rights and start again. 3CC12426AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 313/346 324 10. The installation has been completed. The following window appears. Press OK to restart your computer. 11. After copying files, the Simple Network Time Protocol (SNTP) service is installed and started. After this, the installation process is complete. 12. Now, you are ready to run the 7390LT application. 314/346 324 Issue 01 - April 2001 - Draft 04 3CC12426AAAA TQ BJA 01 A.2.3 – License the .OCX files 1. Run the Ptlic32.exe file located in : C:\Program_files\7390LT-Craft Terminal\Ptlic32.exe The "Power TCP" windows appears. 2. Click on the "Licensing" button The following window appears: 3. Enter the following values Field Value Part PT-119 S/N 119-4-697-23346 Company Alcatel CIT 4. Click on Add The license is printed in the box "Installed License" 5. Click on the license 6. Click on the "Stamp license" button 7. Select the following OCX file to stamp the license: C:\WinNT\System32\ptsnmp32.ocx A window appears on the screen mentioning that the licensing has been done succesfully. 8. Move back to the main window (see window above), click on the license detailed in the box "Installed License", and then click on the Delete button. 3CC12426AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 315/346 324
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2001:08:21 11:23:01-03:00 Create Date : 2001:08:21 11:22:45-03:00 Title : 3cc12426aaaaTQbja01.book Creator : FrameMaker 6.0 Producer : Acrobat Distiller 4.0 for Windows Page Count : 15 Mod Date : 2001:08:21 11:23:01-03:00 Creation Date : 2001:08:21 11:22:45-03:00 Metadata Date : 2001:08:21 11:23:01-03:00EXIF Metadata provided by EXIF.tools