Alpheus Digital ADTP-150W Wireless File Transfer - Toaster Pro User Manual lable

Alpheus Digital Co., Limited. Wireless File Transfer - Toaster Pro lable

user manual

TMInnovation•Share•Fun User Manual<Toaster PRO>Model# ADTP-150 Do Page # P1Content1.0 - General Informaon1.1 - Charge up your Toaster PRO1.2 - Install Toaster APP on you iPad/iPhone /iPod Touch1.3 - Turn your Toaster PRO WiFi On/Off1.4 - Connect Toaster PRO to iPad/iPhone/iPod Touch2.0 - Introducon on Toaster App (4.1.5) 2.1 - Set your Toaster PRO SSID and Password2.2 - Bridge your toaster to your WiFi network2.3 - Fix IP seng3.0 - Use your Toaster PRO as a Travel Router4.0 - Toaster PRO Hardware Specificaon5.0 - FAQ
Model # ABTP- 150 P2 1.0 General Information<Package Content>- Toaster PRO (ADTP-150x) x 1- USB Cable (60cm) x 1- AC Adaptor x 1 (Oponal)- Quick Start Guide x 1- Warranty Card x 1<Default Setting> SSID: Toaster-f20xxxx Password: 88888888Hints: a unique SSID is assigned to each of the Toaster PRO, you can change your preferred SSID and Password in seng page (Please refer to instrucon 2.1). Product OverviewSD Card SlotPower On/OffResetBattery Level indicator(Red/Orange/Green) USB Drive/USB HDD ConnectionPower Charger/PC connectionWiFi status indicator (Blue)PC card reader status indicator (Green)Ethernet port / LAN port1.1 Charge up your Toaster PROAt first me use, please fully charge the baery of your Toaster PRO We highly recommend user to charge baery for 8 hours before first me of useNormal charging me is about 3 hours(WiFi Off mode)To charge the Toaster PRO, connect theUSB cable to the Adaptor and the ToasterPRO as below diagram.The baery level indicator will turn Green or Orange (when Baeryis crically low) while charging. Baery Indicator LED will be off once baery is fully charged.12 P3
1.2 Installing Toaster APP to you iPad/iPhone/iPod Touch1.3 Turn your Toaster PRO WiFi On/OffGo to Apple App store, search “Alpheus Toaster” and install the App to your iPad/iPhone/iPod Touch.Press to turn on/off the Toaster PRO WiFiWiFi Status table below:Stays onFast BlinkRegular BlinkSlow BlinkOFFWiFi ConnectingData TransferringWiFi is ready, iPad/iPhone connectedWiFi is ready, iPad/iPhone not yet connectedWiFi is Off1.4 Connect iPad/iPhone/iPod Touch to Toaster ProGo to Sengs, Press WiFi buon to turn Toaster PRO on, the WiFi indicator LED will turns on in Blue color.Toaster needs approximately 25-30 seconds to inialize. Once Toaster WiFi is Ready, the Blue LED is will be blinking in a regular speed At Sengs →WiFi, you will discover the Toaster SSID from your iPad/iPhone/iPod touch, select Toaster. P5P4
2.0 Introduction on Toaster App (4.1.7)SToaster App may upgrade from me to me, Diagram of the interface may be changed on newer version. For most updated introducon, pls visit our website: www.alpheus-digital.com or go to setup and select Help, you will see the latest User Manual.→→→→→→→→(a) (b) (c)(d)(e) (f) (g) (h)(a) Search Files(b) Refresh the screen / Reconnect(c) Thumbnail View / Single View(d) Download – to download you selected image to the App(e) Files on Toaster(f) Files on App Local Storage (g) Transfer file(s) from App back to Toaster storage (SD Card/USB drive)(h) Sengs P62.1 Set your Toaster PRO SSID and PasswordYou can re-define your SSID and Password by the following steps1）Go to “WiFi Setting” in Toaster App2）Input your New Device name(SSID)3）Input your New Password and press one confirmed Pϳ
2.2 Connect your toaster to your WiFi networkThis “Repeater” funcon allows your iPad/iPhone to connect your Toaster to the WiFi network while accessing Toaster storage contents simultaneously.(For DHCP – Non-Fixed IPenvironment)1）Go to WiFi Settings of Toaster App, Click on “WiFi Repeater”2）Select the WiFi Connection you want to be connecting.P8(For Stac IP – Non-dynamic IP environment)4）Once Password is input, the network setting will be saved to Toaster and Toaster will auto reboot. (Toaster can memorize the network setting and you willnot be ask for password once it saved)3）Input the Password of the acquired network.P9
3）Select “Static IP”2）Select “Repeater Mode”1)Go to WiFi setting of toaster APP click on “Advance setting” P10 5）Select the WiFi Connection you want to bridge6）Input the Password ot the acguirednetwork and press “OK”4）Input your IP and Gateway and7）Input your IP and Gateway and P11
2.3 Setting Up Your Access Point modeToaster is default as Access Point, DHCP mode, if you are trying to use Toaster PRO in a stac IP network, you will need to input your IP Address andGateway. Please follow below instrucon.1) GO to WiFi setting of toaster APP chck on “Advance setting”2) Select “Access Point Mode” P123) Select “Static IP”4) Input your IP and Gateway and P13
RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Company: Alpheus Digital Co., Limited Name: Toaster Pro Model Number: ADTP-150W FCC ID: OC7ADTP-150W This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu