Alpheus Digital ADTP-150W Wireless File Transfer - Toaster Pro User Manual lable

Download:
Mirror Download [FCC.gov]
Document ID	1729649
Application ID	SyskILFCDBiJ3lnq+Ltfwg==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	31.77kB (397104 bits)
Date Submitted	2012-06-25 00:00:00
Date Available	2012-06-25 00:00:00
Creation Date	2012-05-11 11:04:08
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2012-06-15 10:50:02
Document Title	Microsoft Word - lable.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	jim

TM
Innovation•Share•Fun
User Manual

Model# ADTP-150
Content
1.0 - General Information
1.1 - Charge up your Toaster PRO
1.2 - Install Toaster APP on you iPad/iPhone
/iPod Touch
1.3 - Turn your Toaster PRO WiFi On/Off
1.4 - Connect Toaster PRO to iPad/iPhone/iPod
Touch
2.0 - Introduction on Toaster App (4.1.5)
2.1 - Set your Toaster PRO SSID and Password
2.2 - Bridge your toaster to your WiFi network
2.3 - Fix IP setting
3.0 - Use your Toaster PRO as a Travel Router
4.0 - Toaster PRO Hardware Specification
5.0 - FAQ
Do Page # P1
1.0 General Information

Toaster PRO (ADTP-150x) x 1
USB Cable (60cm) x 1
AC Adaptor x 1 (Optional)
Quick Start Guide x 1
Warranty Card x 1
1.1 Charge up your Toaster PRO
At first time use, please fully charge the battery of your
Toaster PRO
We highly recommend user to charge
battery for 8 hours before first time of use
Normal charging time is about 3 hours(WiFi Off mode)
To charge the Toaster PRO, connect theUSB cable to the
Adaptor and the ToasterPRO as below diagram.

SSID: Toaster-f20xxxx
Password: 88888888
Hints: a unique SSID is assigned to each
of the Toaster PRO, you can change your
preferred SSID and Password in setting page
(Please refer to instruction 2.1).
Product Overview
SD Card Slot
WiFi status indicator (Blue)
PC card reader status indicator (Green)
Ethernet port / LAN port
The battery level indicator will turn Green or Orange
(when Batteryis critically low) while charging. Battery
Indicator LED will be off once battery is fully charged.
USB Drive/USB HDD Connection
Power Charger/PC connection
Power On/Off
Reset
Model # ABTP- 150
P2
Battery Level indicator
(Red/Orange/Green)
P3
1.2 Installing Toaster APP to you
iPad/iPhone/iPod Touch
Go to Apple App store, search “Alpheus Toaster”
install the App to your iPad/iPhone/iPod Touch.
1.4 Connect iPad/iPhone/iPod Touch
to Toaster Pro
and
Go to
Settings, Press WiFi button to turn Toaster PRO
on, the WiFi indicator LED
will turns on in Blue color.
Toaster needs approximately 25-30 seconds to initialize.
Once Toaster WiFi is Ready, the Blue LED is will be blinking
in a regular speed At Settings →WiFi, you will discover the
Toaster SSID from your iPad/iPhone/iPod touch, select
Toaster.
1.3 Turn your Toaster PRO WiFi On/Off
Press
to turn on/off the Toaster PRO WiFi
WiFi Status table below:
Stays on
WiFi Connecting
Fast Blink
Data Transferring
Regular Blink
WiFi is ready, iPad/iPhone connected
Slow Blink
WiFi is ready, iPad/iPhone not yet
connected
OFF
WiFi is Off
P4
P5
2.0 Introduction on Toaster App (4.1.7)
SToaster App may upgrade from time to time, Diagram
of the interface may be changed on newer version.
For most updated introduction, pls visit our website:
www.alpheus-digital.com or go to setup and select
Help, you will see the latest User Manual.
You can re-define your SSID and Password by the
following steps
1）Go to “WiFi Setting”
in Toaster App
(c)(d)
→
→
→
(b)
→
(a)
2.1 Set your Toaster PRO SSID and Password
2）Input your
New Device
name(SSID)
3）Input your
New Password
and press
one confirmed
→
→
→
→
(a) Search Files
(b) Refresh the screen / Reconnect
(c) Thumbnail View / Single View
(d) Download – to download you
selected image to the App
(e) Files on Toaster
(f) Files on App Local Storage
(g) Transfer file(s) from App back to
Toaster storage (SD Card/USB drive)
(h) Settings
(e) (f) (g) (h)
P6
Pϳ
2.2 Connect your toaster to your WiFi network
This “Repeater” function allows your iPad/iPhone
to connect your Toaster to the WiFi network while
accessing Toaster storage contents simultaneously.
(For DHCP – Non-Fixed IPenvironment)
3）Input the
Password of
the acquired
network.
1）Go to WiFi Settings of
Toaster App, Click on
“WiFi Repeater”
2）Select the WiFi
Connection you
want to be
connecting.
4）Once Password is input, the network setting will be
saved to Toaster and Toaster will auto reboot.
(Toaster can memorize the network setting and you will
not be ask for password once it saved)
(For Static IP – Non-dynamic IP environment)
P8
P9
4）Input your IP
and Gateway
and
1)Go to WiFi setting of toaster
APP click on “Advance setting”
5）Select the WiFi Connection
you want to bridge
2）Select “Repeater Mode”
6）Input the Password
ot the acguirednetwork
and press “OK”
3）Select “Static IP”
P10
7）Input your IP and Gateway and
P11
2.3 Setting Up Your Access Point mode
Toaster is default as Access Point, DHCP mode, if
you are trying to use Toaster PRO in a static IP
network, you will need to input your IP Address and
Gateway. Please follow below instruction.
3) Select “Static IP”
4) Input your IP and
Gateway and
1) GO to WiFi setting of toaster
APP chck on “Advance setting”
2) Select “Access Point
Mode”
P12
P13
Company: Alpheus Digital Co., Limited
Name: Toaster Pro
Model Number: ADTP-150W
FCC ID: OC7ADTP-150W
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Author                          : jim
Create Date                     : 2012:05:11 11:04:08+08:00
Modify Date                     : 2012:06:15 10:50:02+07:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2012:06:15 10:50:02+07:00
Format                          : application/pdf
Title                           : Microsoft Word - lable.doc
Creator                         : jim
Document ID                     : uuid:b09dbe68-4ea5-4667-a7f3-3323e786719c
Instance ID                     : uuid:fd77428b-ab57-455d-b858-6cba22a898a7
Page Count                      : 8

EXIF Metadata provided by EXIF.tools