Alvarion Technologies BMAX-BA23 Base station BreezeMax 2300 User Manual Manual Filter page

Alvarion Technologies Ltd. Base station BreezeMax 2300 Manual Filter page

Contents

Manual Filter page

Installation Instructions for Operating in the FCC WCS C and D bands TDD - 1 - P/N 215656 May 2010 This document describes how to install and use the FL1500, required for compliance with FCC regulations for the 2.3 GHz WCS bands C and D. FL1500 Specification Item Specifications Frequency Range  2315MHz ~ 2318.5MHz  2346.5MHz ~ 2350MHz Central Frequency Fc1 = 2316.75MHz Fc2 = 2348.25MHz Insertion Loss 2.7dB Max Connectors N-Type, Female Dimensions 148 x 106 x 85 mm Operating Temperature -40°C to +70°C Operating Humidity RH 20% ~ 98%, Waterproof IP67 Package Content • FL1500 Filter Additional Items Required for Installation (available for ordering) • Mounting Kit MD5088 (two metal bands) • Two RF cables from the list below for connecting the Filter to the ODU and antenna: o 0.5m - P/N 835308 o 1m – P/N 835307 o 1.5m – P/N 723218 Installation Guidelines WARNING: ONLY experienced installation professionals who are familiar with local building and safety codes and, wherever applicable, are licensed by the appropriate government regulatory authorities should install outdoor units and antennas. Failure to do so may void the product warranty and may expose the end user or Service Provider to legal and financial liabilities. The manufacturer and its resellers or distributors are not liable for injury, damage or regulation violations associated with the installation of outdoor units or antennas. • Filters must be installed at the Base Station site and at all CPE sites, between the antenna RF port of the 2.3 GHz ODU and the antenna. • The Filter should be installed between the ODU and the antenna, taking into account the lengths of the connecting cables.
Installation Instructions for Operating in the FCC WCS C and D bands TDD - 2 - Installing the Filter 1. Attach the Filter to the pole using the two metal bands, as shown below. The Filter must be installed with the RF connectors facing downward. 2. Connect the ANT RF port of the ODU to the INPUT connector of the Filter. 3. Connect the OUTPUT connector of the Filter to the antenna. Operation When configuring the Frequency and Bandwidth parameters, the following rules must be followed: 1. The frequency must be either 2316.75 or 2348.25 MHz. 2. The Bandwidth must be 3.5 MHz P/N 215656 May 2010

Navigation menu