Alvarion Technologies BULTRA-5 BreezeULTRA User Manual 2395141
Alvarion Technologies Ltd. BreezeULTRA 2395141
Contents
- 1. User Manual
- 2. User manual rev1
User manual rev1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1647194 |
| Application ID | Ex4r4piSMITrBNiAUzObrg== |
| Document Description | User manual rev1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 21.82kB (272778 bits) |
| Date Submitted | 2012-03-02 00:00:00 |
| Date Available | 2012-06-13 00:00:00 |
| Creation Date | 2012-01-06 15:31:18 |
| Producing Software | GPL Ghostscript 9.0 |
| Document Lastmod | 2012-01-19 15:05:52 |
| Document Title | ~2395141 |
| Document Creator | PDFCreator Version 1.2.0 |
| Document Author: | Aimee |
Alvarion Ltd 21A HaBarzel Street Tel Aviv 69710 ISRAEL Tel: + 972-3-6456262 Fax: + 972-3-6456290 www.alvarion.com EMP5605H (ALVARION) High Power 5GHz 11n Mini-PCI Adapter 5GHz IEEE802.11a/n 2T2R 300Mbps High Performance Alvarion miniPCI series radio modules perform extreme high power and economize the power consumption on the system platform. EMP5605H (ALVARION) is an 802.11a/n WiFi 2x2 mini-PCI module designed specifically for integration to maximum performance ratio. EMP5605H (ALVARION) delivers the ultimate wireless triple play experience for video, voice, and data transmission in the home, for the business, and on the road. With enhanced features on the ESD protection, industrial-based operating temperature, economized system power Package Contents consumption, industrial-best sensitivity than normal module, 1 x MiniPCI Adapter (EMP5605H MMCX connectors, and stable heating protection design, makes (ALVARION)) the module is easily to integrate into a wide range of any platform. Features Industrial-best sensitivity -90dBm@6Mbps, -72dBm@54Mbps, -89dBm@MCS0/MCS8, -70dBm@MCS7/MCS15 Compatible among multiple wifi networks Supports IEEE 802.11a/802.11n Enables bandwidth up to 300Mbps 2T2R design architecture MMCX antenna connector Fast throughput for 802.11a and 802.11n Higher and greater reliable throughputs over range Two MMCX connectors Specification Hardware Specification Standard WECA(WiFi & WiFi5 Compliance), IEEE802.11a/n, RoHS Chipset Atheros AR9220 Physical Interface 32-bit Mini-PCI Type III A 2 x MMCX Connector Power Requirements External DC power in supported, Voltage=5V Current Consumption Information Tx Current Consumption Continuous Tx@802.11a <1.7A Continuous Tx@802.11n <2A Alvarion Ltd 21A HaBarzel Street Tel Aviv 69710 ISRAEL Tel: + 972-3-6456262 Fax: + 972-3-6456290 www.alvarion.com EMP5605H (ALVARION) High Power 5GHz 11n Mini-PCI Adapter 5GHz IEEE802.11a/n 2T2R 300Mbps High Performance Rx Current Consumption Continuous Rx <600mA Card on Current Data Communicating with AP <450mA Sleep Current Sleep Mode <100mA RF Specification Frequency Band 802.11a 5.15 ~ 5.35GHz, 5.47 ~ 5.725GHz, 5.725~5.825GHz Data rate 300 Mbps Receive Sensitivity (Typical) 802.11n(20MHz) 802.11n(40MHz) 802.11a -89dBm @ MCS0/MCS8 -86dBm @ MCS0/MCS8 -90dBm @ 6Mbps -70dBm @ MCS7/MCS15 -68dBm @ MCS7/MCS15 -72dBm @ 54Mbps Available transmit power 802.11n ( ± 2dBm ) 802.11a( ± 2dBm ) ( with external 5V power ) 26dBm @ MCS0~1/MCS8~9 26dBm @ 6~24Mbps 25dBm @ MCS2~3/MCS10~11 25dBm @ 36Mbps 24dBm @ MCS4/MCS12 24dBm @ 48Mbps 23dBm @ MCS5/MCS13 23dBm @ 54Mbps 23dBm @ MCS6/MCS14 21dBm @ MCS7/MCS15 Software Specification Security WPA, WPA2, 64/128 bits WEP, TKIP and AES Hardware-base IEEE 802.11i encryption engine Environment & Mechanical Temperature Range -30°C to 80°C Humidity (non-condensing) 0%～95% typical Dimensions 66mm (L) x 59.5mm (W) x 5mm (H) Weight 16g Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For operation within 5.15 ~ 5.25GHz / 5.47 ~5.725GHz frequency range, it is restricted to indoor environment. The band from 5600-5650MHz will be disabled by the software during the manufacturing and cannot be changed by the end user. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 165cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions: 1) Due to the facts that this module has high built-in output power and with a high gain direction antenna, the module can be used in a professional installed end product only. The final product must be professional installed to make sure that 165 cm can be maintained between the antenna and users, and 2) The professional installer shall make sure that the all antennas are fully exposure to the outside radar signal(s) source with no obstruction in between them for proper DFS operation. Also, if extra length of cable is needed for the antenna installation then a proper amplifier must be added to the path for compensating the cable loss. Otherwise the DFS detection sensitivity will be impaired. The improper installation of the antenna may reduce the antenna sensitivity and invalided the certification. 3) The transmitter module may not be co-located with any other transmitter or antenna. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 165cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: LKT-BULTRA-5”. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 165cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 165cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions: (For module device use) 1) Due to the facts that this module has high built-in output power and with a high gain direction antenna, the module can be used in a professional installed end product only. The final product must be professional installed to make sure that 165 cm can be maintained between the antenna and users, and 2) The professional installer shall make sure that the all antennas are fully exposure to the outside radar signal(s) source with no obstruction in between them for proper DFS operation. Also, if extra length of cable is needed for the antenna installation then a proper amplifier must be added to the path for compensating the cable loss. Otherwise the DFS detection sensitivity will be impaired. The improper installation of the antenna may reduce the antenna sensitivity and invalided the certification. 3) The transmitter module may not be co-located with any other transmitter or antenna. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE: Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 165cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains IC:: 2514A-BULTRA5”. Plaque signalétique du produit final Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut être installée de telle sorte qu'une distance de 165cm peut être maintenue entre l'antenne et les utilisateurs. Le produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient des IC: 2514A-BULTRA5". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information à l'utilisateur final L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué dans ce manuel. Caution : (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and (iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. (iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement: Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions susmentionnées, notamment : (i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 MHz doit se conformer à la limite de p.i.r.e.; (iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas. (iv) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Professional installation instruction 1. Installation personal This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting. 2. Installation location The product shall be installed at a location where the radiating antenna can be kept 165cm from nearby person in normal operation condition to meet regulatory RF exposure requirement. 3. External antenna Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC/IC limit and is prohibited. 4. Installation procedure Please refer to user’s manual for the detail. 5. Warning Please carefully select the installation position and make sure that the final output power does not exceed the limit set force in relevant rules. The violation of the rule could lead to serious federal penalty. Instructions d'installation professionnelle 1. Installation Ce produit est destine a un usage specifique et doit etre installe par un personnel qualifie maitrisant les radiofrequences et les regles s'y rapportant. L'installation et les reglages ne doivent pas etre modifies par l'utilisateur final. 2. Emplacement d'installation En usage normal, afin de respecter les exigences reglementaires concernant l'exposition aux radiofrequences, ce produit doit etre installe de facon a respecter une distance de 165cm entre l'antenne emettrice et les personnes. 3. Antenn externe. Utiliser uniiquement les antennes approuvees par le fabricant. L'utilisation d'autres antennes peut conduire a un niveau de rayonnement essentiel ou non essentiel depassant les niveaux limites definis par FCC/IC, ce qui est interdit. 4. Procedure d'installation Consulter le manuel d'utilisation. 5. Avertissement Choisir avec soin la position d'installation et s'assurer que la puissance de sortie ne depasse pas les limites en vigueur. La violation de cette regle peut conduire a de serieuses penalites federales.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract XMP Toolkit : 3.1-701 About : f56eb7ee-3a93-11e1-0000-a547283b08f3 Producer : GPL Ghostscript 9.0 Keywords : Modify Date : 2012:01:19 15:05:52+08:00 Create Date : 2012:01:06 15:31:18+08:00 Creator Tool : PDFCreator Version 1.2.0 Metadata Date : 2012:01:19 15:05:52+08:00 Document ID : f56eb7ee-3a93-11e1-0000-a547283b08f3 Instance ID : uuid:8185ee88-a77a-42aa-befc-c0bfa6fb51d3 Format : application/pdf Title : ~2395141 Creator : Aimee Description : () Has XFA : No Page Count : 10 Subject : Author : AimeeEXIF Metadata provided by EXIF.tools