Amac Tek HAN-50 MP3 Player User Manual users manual
Amac Tek Co., Ltd. MP3 Player users manual
UserManual.wiki
>
Amac Tek
>
HAN 50 User Manual
users manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![Content Content[CONTROL] Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 3[EXIT] from [Config Mode]..............................................................36How to use mediaSync ProgramFirmware Upgrade..............................................................................37Other and Trouble DiagnosisDriver Reinstallation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 0Check List in Case of Trouble............................................................42Font Download. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 5S p e c i f i c a t i o n. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 5Precaution & OverviewC a u t i o n. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0 1Required System Specification..........................................................02 F e a t u r e s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0 2E n c l o s u r e s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0 4Play Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0 5LCD Display.......................................................................................06Basic InformationTo setup Program...............................................................................07To connect to PC................................................................................07To disconnect from PC.......................................................................09To File Download/Upload..................................................................11To change to MODE..........................................................................11To Play Music files (MP3 & WMA)..................................................12How to use SD Card...........................................................................15EQ/REPEAT/SPEED Setting.............................................................17How to use Browser...........................................................................18To listen to FM Radio........................................................................21FM Recording.....................................................................................24Voice Recording.................................................................................25Line-In Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 7[Config Mode] Setting[RECORD] Setting.............................................................................30[FORMAT] Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 1500 영문 메뉴얼2 2004.6.22 2:18 PM 페이지1](https://usermanual.wiki/Amac-Tek/HAN-50/User-Guide-451160-Page-3.png)
![2. Connection through the USB Cable2.Use the USB cable provided if the USB port is positioned at the uncomfort-able place.When the player is connected to PC, two removable disk drives areappeared in [My Computer].The first removable disk drive is for the internal Flash Memory inthe player, and the second one is for SD Card. This can be used onlywhen SD Card is inserted. If the player is connected to PC, [USBConnect] is displayed on the LCD.To open the USB Cap, lean it downward direction and pull itas below pictures.Insert the installation CD, and the following pictures are appeared. (If it is not run automatically, please click on “mediaSync-amac.exe” file inCD-ROM for the manual installation.)※You need to reboot your PC after installation.When the installation is completed, the “mediaSync Player” icon and the“mediaSync Editor” icon are created on the screen of your PC.There are two methods to connect with PC as follows: 1. Direct Connection 1 . Open the cap of the player and connect USB port to your PC. 87Ⅱ. Basic InformationDownPull■To setup Program■To connect to PCⅡ. Basic Information<Notice>500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지9](https://usermanual.wiki/Amac-Tek/HAN-50/User-Guide-451160-Page-7.png)
![Select USB Device and push on [STOP] Button.Disconnect the player after click on [OK] Buttton.1. If you remove player from your PC without executing “SafeHardware Removing,” it may cause the player to be out oforder.2. When you remove player from your PC while moving data,the data in the player will be damaged.※If the player is malfunctioned due to improper disconnection,please format the memory to return to normal condition.(Please refer to page 31 [FORMAT] Setting.) 10To disconnect player from PC, the following should be carried outdepending on the Windows Operating System (OS).▶To disconnect from Windows 98SE / MEPlease click on [START] Button of Windows and select [CON-TROL PANEL] →[SYSTEM] →[DEVICE MANAGEMENT]Disconnect USB Cable from PC after removing [AMACWin98SE/ME USB Mass Storage Driver].③Then, remove the player from PC after click [OK] Button.▶To disconnect from Windows 2000/XP①Please double click the icon “Safely Remove Hardware” at thebottom of right side as bellow.9■To disconnect from PC<Caution>500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지11](https://usermanual.wiki/Amac-Tek/HAN-50/User-Guide-451160-Page-8.png)
![- Auto Power Off : If stop state is maintained for the time set in the[POWER OFF TIME] in the [Config Mode],power is off automatically.- Auto Power Off : The factory set is for 2 minutes. (See page 34[POWER OFF TIME].)▶To Play / Pause- Play / Pause▶Song/Music Selection and Search - Song/Music selection and finding while stopped and played back. - Fast search within the Song/Music while played back.▶Range Repeat Setting/Release Repeat below action push the Navigation Key(▶||) to “REC” direc-tion.- Starting Point Setting of the Range →End Point Setting of theRange Repeat →Release to Range▶Key Lock / Release- This is to prevent the player from the malfunction of buttons in thecomplicated place.▶Sound Volume Controlling (Volume Level : 0~40)▶User EQ SettingPush the Navigation Key(▶| |) to the direction of “REC” longwhile a song/music is played back.Movement between frequency bands: Push the Navigation Key(▶||) to the direction of “FF” or “REW’’.1413Short KeyShort KeyLong KeyShort KeyShort KeyLong Key500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지15](https://usermanual.wiki/Amac-Tek/HAN-50/User-Guide-451160-Page-10.png)
![dB Value setting : Push the Navigation Key(▶| |) to the direc-tion of “+” or “-”. (-12dB ~ 12dB)Return : Press the Menu Key. (If there is no movement for 5 sec,it will be returned automatically.)※The User EQ may only be set, while a song/music is played backin the [Music Mode].▶Usage of SD CardThe SD Card may be used for memory capacity extension.- You may enjoy music by saving music files (MP3 or WMA) inthe SD Card.- When the internal memory capacity lacks while recording,recording continues, since it is converted to SD Card automati-cally. (FM Recording, Voice Recording, Line-In Recording)The SD Card may be used as a simple data moving medium.- It is convenient to use the SD Card when you intend to movedata to another PC.▶How to use SD CardWhen you insert the SD Card, you need to insert the back side ofthe SD Card to be shown as in the following figure. (※Please be careful that the SD Card may be damaged, as well asit does not work, if you insert it in an opposite way.)When the SD Card is inserted or deleted to the player, the follow-ing screen is displayed in the LCD.▶Conversion of Memory by using SD Card (Internal Memory⇔SD Card)When you push the Navigation Key( ▶|| ) to “FF” or “REW” direc-tion in the [Music Mode], it is converted to the SD Card or theInternal Memory following the last file in the Root of the InternalMemory or the SD Card. 1615[SD Card inserted] [SD Card deleted]■How to use SD (Secure Digital) Cardd500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지17](https://usermanual.wiki/Amac-Tek/HAN-50/User-Guide-451160-Page-11.png)
![▶How to set function- EQ/REPEAT/SPEED SelectionWhenever you briefly push Navigation Key( ▶| | ) to the directionof “MODE” from the [Music Mode], it will be converted in the fol-lowing order: EQ →REPEAT →SPEED (The icon for the func-tion under setting flickers.)- If you want to decide detailed values, turn the Menu keyto the “+/-”direction as follows:※EQ/REPEAT/SPEED setting is only possible in the [MusicMode].※When there is no manipulation for 3 seconds in this process, theplayer is automatically returned to the previous state.EQ: Various types of Equalizers are provided suitable to user’stastes when playing a file.EQ: NOR(Normal), ROC(Rock), JAZ(Jazz), CLA(Classic), POP(Pop),USE(User EQ), SRS ON.EQ: This SRS decides whether to apply SRS WOW and TruBass inthe [Config Mode]. (As to detailed SRS, see Page 35 [SRS:WOW] Setting and [SRS:TRUBASS] Setting.)②REPEAT : Setting to Repeat mode at file play.- One Normal( ): After a song/music is played back, operationstops.- One Repeat( ): Plays back a song/music repeatedly.- One Folder( ): When all the songs/music in the concernedfolder have been played back, operation stops.- One Folder Repeat( ): Plays back all the songs/music in theconcerned folder.- All Normal( ): Operation stops after all the songs/musicshave been played back in the memory.- All Repeat( ): Plays back all the songs/music in the memoryrepeatedly.③SPEED : This is useful for language learning because the playspeed may be controlled when a file plays.③SPEED : (50~200%, Normal : Based on 100%)▶Entering into Browser and Exit from BrowserWhen you press the Menu Key briefly in the [Music Mode], it isconverted to a browser function. ▶Searching in the Browser Function- Searching in the Same Depth 1817■EQ/REPEAT/SPEED Setting■How to use BrowserShort KeyShort Key Short Key500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지19](https://usermanual.wiki/Amac-Tek/HAN-50/User-Guide-451160-Page-12.png)
![- Select [Delete].- Go to [Delete].※When you choose folder, the folder will be deleted.※If the folder is not empty, the folder will be not deleted.20- Moving to Lower Directory- Moving to Upper Directory▶Play Back in the Browser Function▶Delete File/Folder in the Browser Function- After selecting the file to be deleted and run to the detail Settingwindow (Pop-Up Window).19Short KeyShort KeyShort KeyShort KeyShort KeyShort KeyShort Key500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지21](https://usermanual.wiki/Amac-Tek/HAN-50/User-Guide-451160-Page-13.png)
![The PRESET/Non-PRESET mode is converted whenever the MenuKey is pressed briefly. ▶Frequency Search•Searching the frequency unit in the Non-PRESET mode. - Searching frequency step unit: Move each step in the unit of 0.1MHz.- Searching effective frequency unit: Search continuously until theeffective frequency is searched.•Searching channel (CH) unit in the PRESET mode.22▶FM Radio Mode- Go to MODE Choice. (See Page 11 [To change to MODE].)- Convert to [FM Mode].- Go to [FM Mode].▶PRESET/Non-PRESET mode SettingThe PRESET mode is a mode in which the frequency saved in CHmay be moved in the unit of CH, when a random frequency has beensaved in the CH. The Non-PRESET mode is the mode in which therandom frequency may be moved in the unit of frequency.21Long Key■To listen to FM RadioLong KeyShort KeyShort KeyShort KeyShort KeyShort Key500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지23](https://usermanual.wiki/Amac-Tek/HAN-50/User-Guide-451160-Page-14.png)
![③Pause to Voice Recording.(In doing so, time display “ -- : -- : --” flickers.)④Listening to the Recorded File.- In doing so, you may playback the immediately previously recordedfile, because the MODE turns to the [Music Mode] temporarily.⑤Returning to the previous [REC Mode] again.※The recorded file is automatically created/saved in the“VOICE” folder.※When the battery was completely discharged or the memoryspace is not sufficient, the current recording is saved in a file,while a warning message appears.26▶Pause to FM Recording.(In doing so, time display “ -- : -- : --” flickers.)※The recorded file is automatically created/saved in the“RADIO” folder.※When recording, the recording is carried out through applicationof the already set [REC SETTING].※You may play the recorded file after converting it to the [MusicMode].※See [REC SETTING] in the [Config Mode] Setting for RecordedFile Format.If you enter the [REC Mode], you need to set the [Line REC]/[VoiceREC] to [Voice REC].①Select to [Voice REC].②Start/Stop to Voice Recording.25■Voice RecordingShort Key Short KeyShort Key Short KeyShort Key Short KeyShort KeyShort Key Short KeyShort KeyShort Key[Init State] [Recording] [Recording Stop][Recording] [Recording Pause] [Recording Stop]Short Key[FM Stare] [Recording] [Recording Stop][Recording] [Recording Pause] [Recording]500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지27](https://usermanual.wiki/Amac-Tek/HAN-50/User-Guide-451160-Page-16.png)
![※When you carrying out recording, the already set Recording Formatis applied; therefore, you always need to set the Recording Formatbefore recording. (See Page 30 [REC SETTING].)If you enter the [REC Mode], you need to set the [Line REC]/[VoiceREC] to [Line REC].Connect the Line-In cable to the output port (earphone port ofexternal equipment) and the Line-In port of this product.▶Line-In Recording①Start/Stop to Line-In Recording.②Pause to Line-In Recording.(In doing so, time display “ -- : -- : --” flickers.)③Listening to Recorded file.- In doing so, you may playback the immediately previously recordedfile because the MODE turns to the [Music Mode] temporarily.④Return to previous [REC Mode] again.※You may check if recording is performed, while listening to theoutput of outside equipment through earphone during therecording.※The recorded file is automatically created/saved in the“AUDIO” folder.※When the battery was completely discharged or the memoryspace is not sufficient, the current recording is saved in a file,while a warning message appears.※When you carrying out recording, the already set RecordingFormat is applied; therefore, you always need to set the RecordingFormat before recording. (See Page 30 [REC SETTING].) 2827■Line-In RecordingShort Key Short KeyShort Key Short KeyShort Key Short KeyShort KeyShort Key※Connecting to Other Audio Device[Init State] [Recording] [Recording Stop][Recording] [Recording Pause] [Recording]500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지29](https://usermanual.wiki/Amac-Tek/HAN-50/User-Guide-451160-Page-17.png)
![●Entering into the [Config Mode]●ConfigurationThe [Config Mode] is configured as follows:●How to Manipulate KeyHow to manipulate the Key to set the [Config Mode] is as follows:1) Movement between the Main Menu.2) Selection. 3) Movement between the Sub Items.Select the [RECORD] Setting ( ) icon.(See page 30 [Movement between the Main Menu].)-Choice a Sampling Frequency, Bitrate.3029Ⅲ. [Config Mode] SettingⅢ. [Config Mode] Setting◆[RECORD] Setting- [REC SETTING] ◆[FORMAT] Setting- FLASH MEMORY QUICK FORMATTING- FLASH MEMORY NORMAL FORMATTING- SD/MMC CARD FORMATTING◆[CONTROL] Setting- [FM BAND] Setting - [EL TIME] Setting- [POWER OFF TIME] Setting - [SRS : WOW] Setting- [SRS : TRUBASS] Setting- [MEDIA SYNC] Setting◆[EXIT] from [Config Mode]- Firmware Version Information display- Remain Memory Capacity displayShort Key Short KeyShort Key■[RECORD] SettingShort Key Short Key[Sampling Freq] [Bitrate] [Sampling Freq] [Bitrate]44 KHz 32 Kbps 44 KHz 80 Kbps32 KHz 48 Kbps 44 KHz 96Kbps44 KHz 64 Kbps 44 KHz 128KbpsShort KeyShort KeyShort KeyShort KeyShort KeyShort Key500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지31](https://usermanual.wiki/Amac-Tek/HAN-50/User-Guide-451160-Page-18.png)
![32④The Formatting is complete.※If The SD/MMC CARD is not inserted, the “CARD FORMAT”is not activated; therefore, the SD/MMC Card Format cannot beexecuted.▶Normal Formatting [Low Formatting]The Normal Format is the function deleting the entire data in theMemory and initializing the Memory by configuring the Track andSector of Memory. When formatting the Internal Memory, thisfunction is supported.1. When the file downloading speed is far slower than before.2. When the file of folder information display breaks or sometrouble exists in the sound played. 3. When the deleted file or folder information is still displayed.▶Quick FormattingThe Memory initializing formatting is conducted, and both InternalMemory and SD Card support this function.31Select the “FORMAT” ( ) icon.(See page 30 [Movement between the Main Menu].)There are “ FORMAT NORMAL” and “FORMAT QUICK” in theInternal Memory and there is ‘CARD FORMAT” in the SD/MMC card.①Select item to be formatting.②Decide the status of the Format.③Conduct the Format.■[FORMAT] Setting※Cases when Normal Formatting is required:Short KeyShort Key Short KeyShort Key500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지33](https://usermanual.wiki/Amac-Tek/HAN-50/User-Guide-451160-Page-19.png)
![▶[EL TIME] SettingThis is the function to set the time for the EL Backlight on (Factoryset is 4 seconds.) ①Choice a [EL TIME].②Choice a time to setting (0~ 60 seconds).▶[POWER OFF TIME] SettingThis product’s power is off automatically when a certain time elaps-es without any movement in the stop state. In this manner, the powerconsumption is minimized. (Factory set time is 60 seconds.)①Choice a [POWER OFF TIME] in the [CONTROL].②Choice a time to setting (15~ 300 seconds).Select the [CONTROL] ( ) icon.(See page 30[Movement between the Main Menu].)•FM BAND Setting•EL TIME Setting•POWER OFF TIME Setting•SRS WOW Setting•SRS TRUBASS Setting•MEDIA SYNC Setting▶[FM BAND] SettingUsers may set the FM Band randomly in order to listen to FM broad-casting anywhere in the world in good quality, and three FM Bandsare provided. (US BAND, JAPAN BAND and EUROPE BAND)(The factory set is US BAND.)①Choice a [FM BAND] in the [CONTROL].②Choice a BAND to Setting.3433Short KeyShort Key■[CONTROL] SettingShort Key500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지35](https://usermanual.wiki/Amac-Tek/HAN-50/User-Guide-451160-Page-20.png)
![This is the function to make the basic sound quality of a file moreabundant and magnificent.▶WOW This function enables you to feel deep taste of music with addedbass and dynamic scope. ▶TRUBASSThis function is to provide an effect of a bigger speaker throughimprovement of bass and low frequency.▶[SRS : WOW] Setting①Choice a [SRS:WOW] in the [CONTROL].②Choice a level (0~ 63).※The factory set is ‘63”.▶[SRS:TRUBASS] Setting①Choice a [SRS:TRUBASS] in the [CONTROL].②Choice a level (0~ 63).※The factory set is “63”.▶[MEDIA SYNC] SettingThe [MEDIA SYNC] is a setting to decide whether or not thewords of a song should be displayed, when the words of a musicfile have been edited. (The factory set is “OFF”.)①Choice a [MEDIA SYNC] in the [CONTROL].②Choice an “ON”/“OFF”.Select the [EXIT] ( ) icon.(See page 30 [Movement between the Main Menu].)Display to Firmware information, remain battery capacity, and exitfrom [Config Mode]. 3635※What is SRS?Short KeyShort Key■[EXIT] from [Config Mode]Short Key500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지37](https://usermanual.wiki/Amac-Tek/HAN-50/User-Guide-451160-Page-21.png)
![This product provides two utility programs.●mediaSync Player- Possible to be used as the MP3 Player program for general PC※See the “Help” in the program as to “How to Use” in detail.●mediaSync Editor- Editing and correcting of the words of songs possible, and thewords of songs information can be saved on the MP3 file. ※Please see the “Help” in the program as to “How to Use” in detail.Start the Program by double clicking the “mediaSync Player” createdon the screen of your PC.1. Firmware Downloading- If you want the up to date Firmware, please download the zippedFirmware that has been publicly notified on AMAC websitewww.amac21.com. - Unzip the Firmware downloaded from our homepage. 2. Firmware Upgrading▶Firmware Upgrading through the “mediaSync Player” program.-Connect the HAN-500 Player to your PC with push to “REC” direction.- Execute the “mediaSync Player” program.-Select the [Firmware Upgrade] in the Menu as in [Figure 3-1] , orclick the [Config] Button in [Figure 3-2] .- Click the[Firmware Upgrade] Button in [Figure 3-3].※Manually install the Driver when the [Firmware Upgrade]Button was not activated. (See Page 40[Manually install theDriver].)※When the connection with PC was not properly done, mobilesaving device may be attached. In this case, please conduct theprocedure again from No. 1.- After setting up the path of the Firmware file (HAN-500.rom)that has been unzipped from the window of “Open firmwareupgrade file” as in [Figure 3-4] , the upgrading is carried out as in 4837Ⅳ.How to use mediaSync ProgramⅣ.How to use mediaSync Program■Firmware UpgradeFigure [3-1] Figure [3-2] Figure [3-3] ⇒500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지39](https://usermanual.wiki/Amac-Tek/HAN-50/User-Guide-451160-Page-22.png)
![▶Delete the existing Driver for driver reinstallationWhen USB driver is not properly installed after the player is con-nected to PC, please follow as below.◆Information related to USB Driver installation (For onlyWindow 98SE / ME users) When the message on PC shows thatthe Driver can not be opened after the player is connected to PC.Please follow as below.①If the player is properly connected to PC, click on [START] ofWindows, and select [CONTROL PANEL] →[SYSTEM] →[DEVICE MANAGER] in sequence. ②Double click on [Universal Serial Bus Controller], and checkwhether or not the [AMAC Win98SE/ME USB Mass StorageDriver] exists. ③Select and delete [AMAC Win98SE/ME USB Mass StorageDriver], the USB Driver of other devices if they are marked witha question mark (?) or an exclamation mark (!), or [UnknownDevice].④Pull out only the USB cable from the player, but leave alone theUSB cable connected to the USB port on PC. Then, reboot thePC.⑤Connect the USB cable to the player after rebooting, and theUSB driver is automatically detected.※Please make sure to visit AMAC website www.amac21.com foryour detailed infotmation.▶Manually install the DriverWhen same problem happens, please install CD to set up USBDriver manually as follows: 1. Warning message is appeared as Figure [4-1] when USBDriver isn’t set up in Windows 98SE / ME.40Ⅴ. Other and Trouble Diagnosis■Driver Reinstallation[Figure 3-5] , if you click the “Open” Button. ※When the Firmware Upgrading ends, the Progress Bar disappearsautomatically.- When the Upgrading is complete, disconnect the HAN-500Player from your PC, after clicking “OK” Button.▶Firmware Upgrading through Copy- Connect the HAN-500 Player to your PC.- Copy the unzipped Firmware file (HAN-500.rom) in the internalmemory Root of the HAN-500 Player.- (※ When you copy the Firmware file in a random folder, not inthe Root, you cannot conduct Firmware upgrading.)-When the copy is complete, remove the HAN-500 Player from your PC.- (※When you remove the HAN-500 Player from your PC, youshould always follow the normal procedures. See Page 9 [Todisconnect fromPC].)-When you turn on the HAN-500 Player, it will automatically searchFirmware file. If the Firmware file exists, the Firmware upgrading will beprogressed automatically. If the Firmware file exists, the Firmwareupgrading will be progressed automatically. 39Figure [3-4] Figure [3-5] Figure [3-6] 500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지41](https://usermanual.wiki/Amac-Tek/HAN-50/User-Guide-451160-Page-23.png)
![2. Then, click on [OK] Button, and follow as below procedures:When there is some trouble in the HAN-500 Player, please check thefollowing first:4241■Check List in Case of TroubleNo Power On •Please check whether it is out of battery or not.•Is the “HOLD” switch on?(If it is on, switch it off)No Sound orNoise Heard•Check if your earphone is plugged in well, or ifthere is alien material in the terminal.•Noise or interrupted sound phenomenon can behappened in case of playing damaged data. Pleasecheck another file.FM ReceptionBad or NoiseHeard•Check if earphone is plugged in well or not.•Check if there are electric devices around the play-er. If so, move them far away and then operate thisp r o d u c t .Nothing Works,since FirmwareUpgrading wasSuspended, dueto SomeProblem.•Try to upgrade the Firmware referring to“Firmware Upgrading (See Page 37).” If you try toupgrade firmware when PC is power-off or duringremoving player from PC, the Firmware Upgradingwas not being executed properly.FileDownloadingNot Working orDriver notRecognized.•Check the connection between PC and the player.•Check if the driver has been properly recognized.•(If the driver is not recognized, reinstall the driverusing the following “Driver Reinstallation”)The file/foldername does notappear and thewords of the con-cerned song arenot displayed.•If the Font file has been damaged, such phe-nomena may take place. In this case, you needto download the Font file again after format.(See Page 45 [Font Download].)Figure [4-1] An Error in recognizing USB DriverFigure [4-2] Installing USB Driver by manualFigure [4-3] Setting up place to install USB DriverFigure [4-4] Completing to install USB Driver by manual500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지43](https://usermanual.wiki/Amac-Tek/HAN-50/User-Guide-451160-Page-24.png)
![A problem took place in the SD/MMC Card.Conduct the SD/MMC Card Quick Formatting.(See Page 31 [FORMAT] Setting.)Case 1: When you use the SD/MMC card for thefirst time after purchasing it.Case 2: When you inserted the SD/MMC card usedin another device which supports anotherfile format. Case 3: When this product has been off, due to bat-tery discharge in the course of theSD/MMC Card Formatting.Case 4: When the USB plug was unplugged while youwere downloading a file to SD/MMC Card.Conduct the INT. Normal Formatting. Case 4:(See Page 31 [FORMAT] Setting.)Case 1: When you insert the SD/MMC Card slow-ly.Case 1: (Insert the card again in a normal speed.)Case 2: When recognition has been failed, due towear and tear of the SD/MMC Card Slot ofthis product.Case 1: (In this case, do not disassemble this prod-uct, but request an after sales service.)4443< In the following cases, conduct the Normal Formatting.>1. When the download speed became remarkably slow, comparedwith when you purchased this product.2. When music is played back, sound is broken or the file and foldernames are broken.3. When you conducted formatting, the Formatting was not done. < Countermeasures when the Following Warning PopupMessages are Displayed>A problem was caused in the Internal Memory.Conduct the Internal memory. Normal Formatting.(See Page 31 [FORMAT] Setting.)This warning popup message may appear, when batteryhas been discharged in the course of Formatting, orwhen the USB plus was unplugged, while downloadinga file. You need to conduct the Internal memoryNormal Formatting. (See Page 31 [FORMAT] Setting.)This is the case that recording cannot continue, dueto no Internal Memory capacity. You need todelete unnecessary files in this product.This is the case that recording cannot continue, dueto no SD/MMC Card capacity. You need to deleteunnecessary files in this product. 500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지45](https://usermanual.wiki/Amac-Tek/HAN-50/User-Guide-451160-Page-25.png)
