Amac Tek HAN-50 MP3 Player User Manual users manual

Download:
Mirror Download [FCC.gov]
Document ID	451160
Application ID	o5HkgMdfWBy9GkuOOqUSvA==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	217kB (2712494 bits)
Date Submitted	2004-07-19 00:00:00
Date Available	2004-07-19 00:00:00
Creation Date	2004-06-22 14:18:56
Producing Software	Acrobat PDFWriter 4.0 for Power Macintosh
Document Lastmod	2004-07-14 16:43:15
Document Title	users manual
Document Creator	QuarkXPress3.3k
Document Author:	administrator

500 영문 메뉴얼2 2004.6.22 2:18 PM 페이지1
Copyright Notices
Information in this document is subject to change without notice and
represent a commitment on the part of AMAC CO., LTD. No part of
this manual may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying and recording, for any purpose without the written permission of AMAC CO.,
LTD. The software described in this document is furnished under a
license agreement and may be used or copied only in accordance with
the terms of the license agreement. It is agreement the law to copy the
software on any other medium except as specifically allowed in the
license agreement. The licensee may make one copy of the software
for backup purpose.
Copyright 2004 by AMAC CO., LTD
All rights reserved.
500 영문 메뉴얼2 2004.6.22 2:18 PM 페이지3
FCC Information
This equipment has been tested and found to comply with limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiates radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio Communications, However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause unacceptable interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures.
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
4. Consult the dealer or an experienced Radio / TV technician
for help
CAUTION
Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate the
equipment.
Certificated Of Conformity
1. Company : AMAC TEK CO., LTD
1. Company : 3rd Floor, Seyo Bldg, 161-8, Samsung-Dong,
1. Company : Kangnam-Gu, Seoul Korea 135-881
2. Model Name : HAN-500
3. FCC Compliance Statement:
3. This device complies with part 15 of FCC Rules.
3. Operation is subject to the following two conditions:
3. (1) This device may not cause harmful interference, and
3. (2)This device must accept any interference received, including
3. (2) interference that may cause undesired operation.
4. CE Rules : Product with the CE Marking comply with both the
EMC Directive (89/336/EEC) and the amendments (91/263/EEC)
issued by the Commission of the European community.
Compliance with these directives implies conformity to the following Europan Norms:
- EN55022:1998+A1:2000+A2:2003 --- Information Technology
- INOLLLASDL
55022 + 1 : Equipment - Radio disturbance
- EN55024:1998+A1:2001+A2:2003 --- Information Technology Equipment Immunity
- EN55013:2001 --- Sound and television broadcast
receivers and equipment - Radio disturbance
500 영문 메뉴얼2 2004.6.22 2:18 PM 페이지1
Content
Precaution & Overview
Caution ........................................................................................... 01
Required System Specification..........................................................02
Features ....................................................................................02
E n c l o s u r e s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0 4
Play Overview...................................................................................05
LCD Display.......................................................................................06
Basic Information
To setup Program...............................................................................07
To connect to PC................................................................................07
To disconnect from PC .......................................................................09
To File Download/Upload ..................................................................11
To change to MODE..........................................................................11
To Play Music files (MP3 & WMA) ..................................................12
How to use SD Card ...........................................................................15
EQ/REPEAT/SPEED Setting .............................................................17
How to use Browser...........................................................................18
To listen to FM Radio........................................................................21
FM Recording .....................................................................................24
Voice Recording .................................................................................25
Line-In Recording..............................................................................27
[Config Mode] Setting
.............................................................................
[RECORD] Setting
30
[FORMAT] Setting............................................................................31
Content
[CONTROL] Setting .......................................................................... 33
[EXIT] from [Config Mode]..............................................................36
How to use mediaSync Program
Firmware Upgrade ..............................................................................37
Other and Trouble Diagnosis
Driver Reinstallation..........................................................................40
Check List in Case of Trouble ............................................................42
Font Download............................................................................. 45
Specification.......................................................................................45
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지3
Ⅰ. Precaution & Overview
■ Caution
Please be sure to read the following a because these may be the cause
of trouble.
Ⅰ. Precaution & Overview
■ Required System Specification
◆ PC Hardware
•20MB Hard Disk Space or higher
•CD-ROM Driver
•PC for USB Port supported
◆ PC Software
•Windows98SE/ME/2000/XP
•CD-ROM Driver
•PC for USB Port supported
■ Features
1. Portable Disk Function with
P&P(Plug and Play) type
- Additional Hard Disk Drive is
appeared on your PC.
- It consists of directory structure
and users can create the folder to
save, copy, playback, and delete
the desired music.
※ The contents in this manual may change without any notice in
advance due to functional improvement of the product or
change of specification.
2. SD/MMC Card Support
- The player supports SD/MMC Card slot so that it can be used for
music file as a store.
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지5
3. Encoding Function
- Users can record not only voice but FM Radio at the real time and the
desired MP3 files can be made to directly connect to other audio devices
such as CD Player, Cassette Tape Recorder and so on.
4. FM Radio Function
Users can listen to FM Radio to use preset frequency function by
Auto Scan and the preset frequencies are saved automatically.
5. Strong Browser
You may browse desired information more easily by using the
Navigation Key in the front.
This player also supports file management function including
deleting files and folders. In this manner, convenience is provided
to users.
6. Firmware Upgrade
Convenient firmware upgrading environment is provided to customers for constant improvement of the product function. refer to
AMAC website “www.amac.com” please.
7. Support of the Words of Songs
Through a “mediaSyns Player” program and a “mediaSync
Editor” program, which are supported in this player, you may
search and download words of songs by connecting to the Words
of Songs File Server. Also, you may synchronize the words of
sons and text data with the MP3 files such as music or language
learming. Edit function to correct, delete and save files is also
available.
8. High Quality Sound Effect (SRS)
This is to enhance original sound quality to magnificent high
quality sound.
■ Enclosures
INSTALLATION CD
USER’
S MANUAL
BATTERY
NECK STRAP
EARPHONE
USB CABLE
AUDIO CABLE
CARRYING CASE(Option)
SPORT ARM BAND(Option)
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지7
■ Play Overview
■ LCD Display
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
Current file’s location information
Playback time of the current track
HOLD ON/OFF setting
Remaining battery capacity
Range repeat
Compression file format of the current track(MP2/MP3/WMA)
Sampling Frequency of the current track
Bitrate of the current track
Level spectrum of played back sound
File name of the current track
Folder name of the current track
Current file’s track number (8th track song/music of a total of 79 files)
EQ (Equalizer) setting (Normal, Rock, Jazz, Classic, Pop, User EQ,
SRS ON)
⑭ REPEAT (Repeat mode) setting (A playback, a repeated playback,
playback within directory, repeated playback within directory, all
songs playback, repeated playback of the all songs)
⑮ SPEED (Playback speed) setting (50~200%)
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지9
Ⅱ. Basic Information
■ To setup Program
Insert the installation CD, and the following pictures are appeared.
(If it is not run automatically, please click on “mediaSync-amac.exe” file in
CD-ROM for the manual installation.)
※ You need to reboot your PC after installation.
Ⅱ. Basic Information
2. Connection through the USB Cable
2.Use the USB cable provided if the USB port is positioned at the uncomfortable place.
When the player is connected to PC, two removable disk drives are
appeared in [My Computer].
The first removable disk drive is for the internal Flash Memory in
the player, and the second one is for SD Card. This can be used only
when SD Card is inserted. If the player is connected to PC, [USB
Connect] is displayed on the LCD.

When the installation is completed, the “mediaSync Player” icon and the
“mediaSync Editor” icon are created on the screen of your PC.
■ To connect to PC
There are two methods to connect with PC as follows:
1. Direct Connection
1.Open the cap of the player and connect USB port to your PC.
To open the USB Cap, lean it downward direction and pull it
as below pictures.
Down
Pull
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지11
■ To disconnect from PC
To disconnect player from PC, the following should be carried out
depending on the Windows Operating System (OS).
▶ To disconnect from Windows 98SE / ME
Please click on [START] Button of Windows and select [CONTROL PANEL] → [SYSTEM] → [DEVICE MANAGEMENT]
Disconnect USB Cable from PC after removing [AMAC
Win98SE/ME USB Mass Storage Driver].
③ Then, remove the player from PC after click [OK] Button.
▶ To disconnect from Windows 2000/XP
① Please double click the icon “Safely Remove Hardware” at the
bottom of right side as bellow.
Select USB Device and push on [STOP] Button.
Disconnect the player after click on [OK] Buttton.

1. If you remove player from your PC without executing “Safe
Hardware Removing,” it may cause the player to be out of
order.
2. When you remove player from your PC while moving data,
the data in the player will be damaged.
※ If the player is malfunctioned due to improper disconnection,
please format the memory to return to normal condition.
(Please refer to page 31 [FORMAT] Setting.)
10
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지13
■ To File Download/Upload
With regard to File Download, when you executed the Windows
Explorer, after connecting this product with your PC,
after entering into the MODE Conversion as in the following figure.
After selecting MODE, if you push the Navigation Key( ▶||), it will
be converted to the concerned MODE.
Select a file saved on the hard
disk of your PC and choose
“Copy” by pressing the right
button on your mouse.
Short Key
Short Key
Short Key
② After moving to the desired location within the mobile disk, select
“Paste”by pressing the right button on the mouse.
※ Users can create the desired folders for user’s convenience.
※ (i.e : Music, Pictures, Business, and so on)
※ Uploading is on the contrary of downloading.
Short Key
- Music Mode : To play MP3 and WMA files
- FM Mode : To FM Radio and Recording Mode
- REC Mode : To Line-in Recoding and Voice Recording Mode
- Config Mode : To set various things and manage files for user’s
convenience
■ To Play Music files (MP3 & WMA)
■ To change to MODE c
11
▶ To change to MODE
When you push the Navigation Key(▶||) to the ‘“MODE” direction
long, you may select by pressing in the direction of “ FF” or “REW”
▶ Power On/Off
- Power On
- Power Off
Short Key
Long Key
12
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지15
- Auto Power Off : If stop state is maintained for the time set in the
[POWER OFF TIME] in the [Config Mode],
power is off automatically.
- Auto Power Off : The factory set is for 2 minutes. (See page 34
[POWER OFF TIME].)
▶ Key Lock / Release
- This is to prevent the player from the malfunction of buttons in the
complicated place.
▶ To Play / Pause
- Play / Pause
Short Key
▶ Sound Volume Controlling (Volume Level : 0~40)
▶ Song/Music Selection and Search
- Song/Music selection and finding while stopped and played back.
Short Key
▶ User EQ Setting
Push the Navigation Key(▶||) to the direction of “REC” long
while a song/music is played back.
- Fast search within the Song/Music while played back.
Long Key
Long Key
▶ Range Repeat Setting/Release
Repeat below action push the Navigation Key(▶||) to “REC” direction.
- Starting Point Setting of the Range → End Point Setting of the
Range Repeat → Release to Range
Short Key
13
Movement between frequency bands: Push the Navigation Key
(▶||) to the direction of “FF” or “REW’’.
Short Key
14
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지17
dB Value setting : Push the Navigation Key(▶||) to the direction of “+” or “-”. (-12dB ~ 12dB)
▶ How to use SD Card
When you insert the SD Card, you need to insert the back side of
the SD Card to be shown as in the following figure.
(※ Please be careful that the SD Card may be damaged, as well as
it does not work, if you insert it in an opposite way.)
Return : Press the Menu Key. (If there is no movement for 5 sec,
it will be returned automatically.)
※ The User EQ may only be set, while a song/music is played back
in the [Music Mode].
When the SD Card is inserted or deleted to the player, the following screen is displayed in the LCD.
■ How to use SD (Secure Digital) Cardd
▶ Usage of SD Card
15
The SD Card may be used for memory capacity extension.
- You may enjoy music by saving music files (MP3 or WMA) in
the SD Card.
- When the internal memory capacity lacks while recording,
recording continues, since it is converted to SD Card automatically. (FM Recording, Voice Recording, Line-In Recording)
The SD Card may be used as a simple data moving medium.
- It is convenient to use the SD Card when you intend to move
data to another PC.
[SD Card inserted]
[SD Card deleted]
▶ Conversion of Memory by using SD Card (Internal Memory
⇔ SD Card)
When you push the Navigation Key( ▶|| ) to “FF” or “REW” direction in the [Music Mode], it is converted to the SD Card or the
Internal Memory following the last file in the Root of the Internal
Memory or the SD Card.
16
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지19
■ EQ/REPEAT/SPEED Setting
▶ How to set function
- EQ/REPEAT/SPEED Selection
Whenever you briefly push Navigation Key( ▶|| ) to the direction
of “MODE” from the [Music Mode], it will be converted in the following order: EQ → REPEAT → SPEED (The icon for the function under setting flickers.)
Short Key
- If you want to decide detailed values, turn the Menu keyto the “+/-”
② REPEAT : Setting to Repeat mode at file play.
- One Normal(
): After a song/music is played back, operation
stops.
- One Repeat(
): Plays back a song/music repeatedly.
- One Folder(
): When all the songs/music in the concerned
folder have been played back, operation stops.
- One Folder Repeat(
): Plays back all the songs/music in the
concerned folder.
- All Normal(
): Operation stops after all the songs/musics
have been played back in the memory.
- All Repeat(
): Plays back all the songs/music in the memory
repeatedly.
③ SPEED : This is useful for language learning because the play
speed may be controlled when a file plays.
③ SPEED : (50~200%, Normal : Based on 100%)
direction as follows:
※ EQ/REPEAT/SPEED setting is only possible in the [Music
Mode].
※ When there is no manipulation for 3 seconds in this process, the
player is automatically returned to the previous state.
17
EQ: Various types of Equalizers are provided suitable to user’s
tastes when playing a file.
EQ: NOR(Normal), ROC(Rock), JAZ(Jazz), CLA(Classic), POP(Pop),
USE(User EQ), SRS ON.
EQ: This SRS decides whether to apply SRS WOW and TruBass in
the [Config Mode]. (As to detailed SRS, see Page 35 [SRS:
WOW] Setting and [SRS:TRUBASS] Setting.)
■ How to use Browser
▶ Entering into Browser and Exit from Browser
When you press the Menu Key briefly in the [Music Mode], it is
converted to a browser function.
Short Key
Short Key
▶ Searching in the Browser Function
- Searching in the Same Depth
18
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지21
Short Key
- Moving to Lower Directory
- Select [Delete].
Short Key
Short Key
- Go to [Delete].
- Moving to Upper Directory
Short Key
Short Key
▶ Play Back in the Browser Function
Short Key
※ When you choose folder, the folder will be deleted.
※ If the folder is not empty, the folder will be not deleted.
Short Key
▶ Delete File/Folder in the Browser Function
- After selecting the file to be deleted and run to the detail Setting
19
window (Pop-Up Window).
20
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지23
■ To listen to FM Radio
The PRESET/Non-PRESET mode is converted whenever the Menu
Key is pressed briefly.
▶ FM Radio Mode
- Go to MODE Choice. (See Page 11 [To change to MODE].)
Short Key
▶ Frequency Search
Long Key
•Searching the frequency unit in the Non-PRESET mode.
- Searching frequency step unit: Move each step in the unit of 0.1MHz.
Short Key
Short Key
- Convert to [FM Mode].
- Searching effective frequency unit: Search continuously until the
effective frequency is searched.
- Go to [FM Mode].
Short Key
▶ PRESET/Non-PRESET mode Setting
21
The PRESET mode is a mode in which the frequency saved in CH
may be moved in the unit of CH, when a random frequency has been
saved in the CH. The Non-PRESET mode is the mode in which the
random frequency may be moved in the unit of frequency.
Long Key
•Searching channel (CH) unit in the PRESET mode.
22
Short Key
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지25
▶ Manual Save of Frequency
① Convert to the PRESET mode.
Short Key
⑥ Frequency Save.
Short Key
② Enter into PRESET save mode.
② When you enter into the PRESET save mode. CH number fickers at this time.
Short Key
▶ Automatic Frequency Save (Auto-Scan).
Long Key
Short Key
③ Select CH to save Frequency.(In doing so, CH numberflickers.)
※ Cancellation of Automatic Preset Save: When you push the
Navigation Key( ▶||) briefly, when conducting automatic save,
the existing CH information is all deleted, while only CH that
Short Key
④ Frequency Conversion. (In doing so, freguency number flickers.)
has been automatically saved so far is saved.
※ Since an earphone functions as an antenna, you should plug in
your earphone when using FM.
■ FM Recording
Short Key
23
⑤ Select frequency to save. (In doing so, freguency number flickers)
This product may record the broadcasting that you are listening, while
you listen to FM.
▶ Start/Stop to FM Recording
24
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지27
[FM Stare]
Short Key
[Recording]
Short Key
[Recording Stop]
(In doing so, time display “ -- : -- : --” flickers.)
Short Key
[Recording Pause]
Short Key
Short Key
[Recording]
Short Key
[Recording Stop]
③ Pause to Voice Recording.
(In doing so, time display “ -- : -- : --” flickers.)
▶ Pause to FM Recording.
[Recording]
[Init State]
[Recording]
※ The recorded file is automatically created/saved in the
“RADIO” folder.
※ When recording, the recording is carried out through application
of the already set [REC SETTING].
※ You may play the recorded file after converting it to the [Music
Mode].
※ See [REC SETTING] in the [Config Mode] Setting for Recorded
File Format.
[Recording]
Short Key
[Recording Pause]
Short Key
[Recording Stop]
④ Listening to the Recorded File.
- In doing so, you may playback the immediately previously recorded
file, because the MODE turns to the [Music Mode] temporarily.
Short Key
⑤ Returning to the previous [REC Mode] again.
■ Voice Recording
If you enter the [REC Mode], you need to set the [Line REC]/[Voice
REC] to [Voice REC].
① Select to [Voice REC].
Short Key
※ The recorded file is automatically created/saved in the
Short Key
25
② Start/Stop to Voice Recording.
Short Key
“VOICE” folder.
※ When the battery was completely discharged or the memory
space is not sufficient, the current recording is saved in a file,
while a warning message appears.
26
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지29
※ When you carrying out recording, the already set Recording Format
is applied; therefore, you always need to set the Recording Format
before recording. (See Page 30 [REC SETTING].)
[Recording]
Short Key
[Recording Pause]
Short Key
[Recording]
③ Listening to Recorded file.
■ Line-In Recording
- In doing so, you may playback the immediately previously recorded
If you enter the [REC Mode], you need to set the [Line REC]/[Voice
REC] to [Line REC].
Short Key
file because the MODE turns to the [Music Mode] temporarily.
Short Key
Short Key
④ Return to previous [REC Mode] again.
※ Connecting to Other Audio Device
Connect the Line-In cable to the output port (earphone port of
external equipment) and the Line-In port of this product.
Short Key
▶ Line-In Recording
① Start/Stop to Line-In Recording.
[Init State]
27
Short Key
[Recording]
Short Key
② Pause to Line-In Recording.
(In doing so, time display “ -- : -- : --” flickers.)
[Recording Stop]
※ You may check if recording is performed, while listening to the
output of outside equipment through earphone during the
recording.
※ The recorded file is automatically created/saved in the
“AUDIO” folder.
※ When the battery was completely discharged or the memory
space is not sufficient, the current recording is saved in a file,
while a warning message appears.
※ When you carrying out recording, the already set Recording
Format is applied; therefore, you always need to set the Recording
Format before recording. (See Page 30 [REC SETTING].)
28
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지31
Short Key
Ⅲ. [Config Mode] Setting
Ⅲ. [Config Mode] Setting
● Entering into the [Config Mode]
Short Key
Short Key
Short Key
Short Key
Short Key
● Configuration
The [Config Mode] is configured as follows:
◆ [RECORD] Setting
- [REC SETTING]
◆ [FORMAT] Setting
- FLASH MEMORY QUICK FORMATTING
- FLASH MEMORY NORMAL FORMATTING
- SD/MMC CARD FORMATTING
◆ [CONTROL] Setting
- [FM BAND] Setting
- [EL TIME] Setting
- [POWER OFF TIME] Setting
- [SRS : WOW] Setting
- [SRS : TRUBASS] Setting
- [MEDIA SYNC] Setting
◆ [EXIT] from [Config Mode]
- Firmware Version Information display
- Remain Memory Capacity display
● How to Manipulate Key
29
How to manipulate the Key to set the [Config Mode] is as follows:
1) Movement between the Main Menu.
Short Key
2) Selection.
3) Movement between the Sub Items.
Short Key
Short Key
■ [RECORD] Setting
Select the [RECORD] Setting (
) icon.
(See page 30 [Movement between the Main Menu].)
Short Key
Short Key
- Choice a Sampling Frequency, Bitrate.
[Sampling Freq]
44 KHz
32 KHz
44 KHz
[Bitrate]
32 Kbps
48 Kbps
64 Kbps
[Sampling Freq] [Bitrate]
44 KHz
80 Kbps
44 KHz
96Kbps
44 KHz
128Kbps
30
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지33
④ The Formatting is complete.
■ [FORMAT] Setting
Select the “FORMAT” (
) icon.
(See page 30 [Movement between the Main Menu].)
※ If The SD/MMC CARD is not inserted, the “CARD FORMAT”
is not activated; therefore, the SD/MMC Card Format cannot be
executed.
Short Key
▶ Normal Formatting [Low Formatting]
There are “ FORMAT NORMAL” and “FORMAT QUICK” in the
Internal Memory and there is ‘CARD FORMAT” in the SD/MMC card.
① Select item to be formatting.
The Normal Format is the function deleting the entire data in the
Memory and initializing the Memory by configuring the Track and
Sector of Memory. When formatting the Internal Memory, this
function is supported.
※ Cases when Normal Formatting is required:
Short Key
Short Key
② Decide the status of the Format.
1. When the file downloading speed is far slower than before.
2. When the file of folder information display breaks or some
trouble exists in the sound played.
3. When the deleted file or folder information is still displayed.
▶ Quick Formatting
The Memory initializing formatting is conducted, and both Internal
Memory and SD Card support this function.
③ Conduct the Format.
32
31
Short Key
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지35
■ [CONTROL] Setting
▶ [EL TIME] Setting
Select the [CONTROL] (
) icon.
(See page 30[Movement between the Main Menu].)
This is the function to set the time for the EL Backlight on (Factory
set is 4 seconds.)
① Choice a [EL TIME].
•FM BAND Setting
•EL TIME Setting
•POWER OFF TIME Setting
•SRS WOW Setting
•SRS TRUBASS Setting
•MEDIA SYNC Setting
Short Key
② Choice a time to setting (0~ 60 seconds).
▶ [FM BAND] Setting
Users may set the FM Band randomly in order to listen to FM broadcasting anywhere in the world in good quality, and three FM Bands
are provided. (US BAND, JAPAN BAND and EUROPE BAND)
(The factory set is US BAND.)
① Choice a [FM BAND] in the [CONTROL].
▶ [POWER OFF TIME] Setting
This product’s power is off automatically when a certain time elapses without any movement in the stop state. In this manner, the power
consumption is minimized. (Factory set time is 60 seconds.)
① Choice a [POWER OFF TIME] in the [CONTROL].
Short Key
② Choice a BAND to Setting.
Short Key
② Choice a time to setting (15~ 300 seconds).
33
34
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지37
※ What is SRS?
This is the function to make the basic sound quality of a file more
abundant and magnificent.
② Choice a level (0~ 63).
▶ WOW
This function enables you to feel deep taste of music with added
bass and dynamic scope.
▶ TRUBASS
This function is to provide an effect of a bigger speaker through
improvement of bass and low frequency.
▶ [SRS : WOW] Setting
※ The factory set is “63”.
▶ [MEDIA SYNC] Setting
The [MEDIA SYNC] is a setting to decide whether or not the
words of a song should be displayed, when the words of a music
file have been edited. (The factory set is “OFF”.)
① Choice a [MEDIA SYNC] in the [CONTROL].
① Choice a [SRS:WOW] in the [CONTROL].
Short Key
Short Key
② Choice a level (0~ 63).
※ The factory set is ‘63”.
▶ [SRS:TRUBASS] Setting
① Choice a [SRS:TRUBASS] in the [CONTROL].
35
Short Key
② Choice an “ON”/“OFF”.
■ [EXIT] from [Config Mode]
Select the [EXIT] (
) icon.
(See page 30 [Movement between the Main Menu].)
Display to Firmware information, remain battery capacity, and exit
from [Config Mode].
36
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지39
Ⅳ. How to use mediaSync Program
Ⅳ. How to use mediaSync Program
This product provides two utility programs.
● mediaSync Player
- Possible to be used as the MP3 Player program for general PC
※ See the “Help” in the program as to “How to Use” in detail.
● mediaSync Editor
- Editing and correcting of the words of songs possible, and the
words of songs information can be saved on the MP3 file.
※ Please see the “Help” in the program as to “How to Use” in detail.
■ Firmware Upgrade
Start the Program by double clicking the “mediaSync Player” created
on the screen of your PC.
1. Firmware Downloading
- If you want the up to date Firmware, please download the zipped
Firmware that has been publicly notified on AMAC website
www.amac21.com.
- Unzip the Firmware downloaded from our homepage.
2. Firmware Upgrading
▶ Firmware Upgrading through the “mediaSync Player” program.
-Connect the HAN-500 Player to your PC with push to “REC” direction.
⇒
37
- Execute the “mediaSync Player” program.
Figure [3-1]
Figure [3-2]
- Select the [Firmware Upgrade] in the Menu as in [Figure 3-1] , or
click the [Config] Button in [Figure 3-2] .
Figure [3-3]
- Click the[Firmware Upgrade] Button in [Figure 3-3].
※ Manually install the Driver when the [Firmware Upgrade]
Button was not activated. (See Page 40[Manually install the
Driver].)
※ When the connection with PC was not properly done, mobile
saving device may be attached. In this case, please conduct the
procedure again from No. 1.
- After setting up the path of the Firmware file (HAN-500.rom)
that has been unzipped from the window of “Open firmware
upgrade file” as in [Figure 3-4] , the upgrading is carried out as in
48
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지41
Ⅴ. Other and Trouble Diagnosis
[Figure 3-5] , if you click the “Open” Button.
※ When the Firmware Upgrading ends, the Progress Bar disappears
automatically.
■ Driver Reinstallation
▶ Delete the existing Driver for driver reinstallation
When USB driver is not properly installed after the player is connected to PC, please follow as below.
Figure [3-5]
Figure [3-4]
- When the Upgrading is complete, disconnect the HAN-500
Player from your PC, after clicking “OK” Button.
▶ Firmware Upgrading through Copy
- Connect the HAN-500 Player to your PC.
- Copy the unzipped Firmware file (HAN-500.rom) in the internal
memory Root of the HAN-500 Player.
- (※ When you copy the Firmware file in a random folder, not in
the Root, you cannot conduct Firmware upgrading.)
-When the copy is complete, remove the HAN-500 Player from your PC.
- (※ When you remove the HAN-500 Player from your PC, you
should always follow the normal procedures. See Page 9 [To
disconnect fromPC].)
-When you turn on the HAN-500 Player, it will automatically search
Firmware file. If the Firmware file exists, the Firmware upgrading will be
progressed automatically. If the Firmware file exists, the Firmware
upgrading will be progressed automatically.
◆ Information related to USB Driver installation (For only
Window 98SE / ME users) When the message on PC shows that
the Driver can not be opened after the player is connected to PC.
Please follow as below.
① If the player is properly connected to PC, click on [START] of
Windows, and select [CONTROL PANEL] → [SYSTEM] →
[DEVICE MANAGER] in sequence.
② Double click on [Universal Serial Bus Controller], and check
whether or not the [AMAC Win98SE/ME USB Mass Storage
Driver] exists.
③ Select and delete [AMAC Win98SE/ME USB Mass Storage
Driver], the USB Driver of other devices if they are marked with
a question mark (?) or an exclamation mark (!), or [Unknown
Device].
④ Pull out only the USB cable from the player, but leave alone the
USB cable connected to the USB port on PC. Then, reboot the
PC.
⑤ Connect the USB cable to the player after rebooting, and the
USB driver is automatically detected.
※ Please make sure to visit AMAC website www.amac21.com for
your detailed infotmation.
▶ Manually install the Driver
When same problem happens, please install CD to set up USB
Driver manually as follows:
39
Figure [3-6]
1. Warning message is appeared as Figure [4-1] when USB
Driver isn’t set up in Windows 98SE / ME.
40
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지43
■ Check List in Case of Trouble
Figure [4-1] An Error in recognizing USB Driver
When there is some trouble in the HAN-500 Player, please check the
following first:
2. Then, click on [OK] Button, and follow as below procedures:
Figure [4-2] Installing USB Driver by manual
Figure [4-3] Setting up place to install USB Driver
41
Figure [4-4] Completing to install USB Driver by manual
No Power On
•Please check whether it is out of battery or not.
•Is the “HOLD” switch on?(If it is on, switch it off)
No Sound or
Noise Heard
•Check if your earphone is plugged in well, or if
there is alien material in the terminal.
•Noise or interrupted sound phenomenon can be
happened in case of playing damaged data. Please
check another file.
FM Reception
Bad or Noise
Heard
•Check if earphone is plugged in well or not.
•Check if there are electric devices around the player. If so, move them far away and then operate this
product.
File
Downloading
Not Working or
Driver not
Recognized.
•Check the connection between PC and the player.
•Check if the driver has been properly recognized.
•(If the driver is not recognized, reinstall the driver
using the following“Driver Reinstallation”
Nothing Works,
since Firmware
Upgrading was
Suspended, due
to Some
Problem.
•Try to upgrade the Firmware referring to
“Firmware Upgrading (See Page 37).” If you try to
upgrade firmware when PC is power-off or during
removing player from PC, the Firmware Upgrading
was not being executed properly.
The file/folder
name does not
appear and the
words of the concerned song are
not displayed.
•If the Font file has been damaged, such phenomena may take place. In this case, you need
to download the Font file again after format.
(See Page 45 [Font Download].)
42
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지45
< In the following cases, conduct the Normal Formatting.>
1. When the download speed became remarkably slow, compared
with when you purchased this product.
2. When music is played back, sound is broken or the file and folder
names are broken.
3. When you conducted formatting, the Formatting was not done.
< Countermeasures when the Following Warning Popup
Messages are Displayed>
A problem was caused in the Internal Memory.
Conduct the Internal memory. Normal Formatting.
(See Page 31 [FORMAT] Setting.)
This warning popup message may appear, when battery
has been discharged in the course of Formatting, or
when the USB plus was unplugged, while downloading
a file. You need to conduct the Internal memory
Normal Formatting. (See Page 31 [FORMAT] Setting.)
This is the case that recording cannot continue, due
to no Internal Memory capacity. You need to
delete unnecessary files in this product.
This is the case that recording cannot continue, due
to no SD/MMC Card capacity. You need to delete
unnecessary files in this product.
43
A problem took place in the SD/MMC Card.
Conduct the SD/MMC Card Quick Formatting.
(See Page 31 [FORMAT] Setting.)
Case 1: When you use the SD/MMC card for the
first time after purchasing it.
Case 2: When you inserted the SD/MMC card used
in another device which supports another
file format.
Case 3: When this product has been off, due to battery discharge in the course of the
SD/MMC Card Formatting.
Case 4: When the USB plug was unplugged while you
were downloading a file to SD/MMC Card.
Conduct the INT. Normal Formatting.
Case 4:(See Page 31 [FORMAT] Setting.)
Case 1: When you insert the SD/MMC Card slowly.
Case 1: (Insert the card again in a normal speed.)
Case 2: When recognition has been failed, due to
wear and tear of the SD/MMC Card Slot of
this product.
Case 1: (In this case, do not disassemble this product, but request an after sales service.)
44
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지47
■ Font Download
The Font in the product may be damaged, due to inadequate movement while using this product. In this case, you may download the
Font in the following manner.
① Download the Font File (AMAC.FNT) to your PC from the
AMAC website www.amac21.com.
② After connecting this product to your PC, download the downloaded “AMAC.FNT” file to this product.
② (In doing so, if you change the file name, it is not recognized as a
Font file in this product.)
③ In doing so, this product searches automatically, if “AMAC.FNT”
file is in the product, and recognizes as the Font file and saves it.
(After the Font file is saved, it is automatically deleted.)
⇒
⇒
■ Specification
Model No.
Memory
Battery
Playing Time
Size
45
HAN-500
Internal Memory : 128/256/512MB/1GB
SD/MMC Card : 128/256/512/1GB
1.5V ⅹ AAA type 1EA
10 Hours
30X100X44mm
Interface
USB Port
Downloading Speed
6.8Mbps
Voice Recording Time
8 Hours (128MB, 32Kbps)
M E M O
500 영문 메뉴얼2 2004.6.22 2:19 PM 페이지49
MEMO
M E M O
MEMO
M E M O

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 27
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:0121ca4e-a22f-43ea-ae07-df2217485f6b
Producer                        : Acrobat PDFWriter 4.0 for Power Macintosh
Create Date                     : 2004:06:22 14:18:56Z
Creator Tool                    :   QuarkXPress3.3k
Modify Date                     : 2004:07:14 16:43:15+09:00
Metadata Date                   : 2004:07:14 16:43:15+09:00
Document ID                     : uuid:37ccc156-bfc9-4312-9114-a10841bbe3b0
Format                          : application/pdf
Creator                         : administrator
Author                          : administrator

EXIF Metadata provided by EXIF.tools